Looking at the list of nVidia Geforce packages they all say "NVIDIA graphics driver kernel module for GeForce 6xxx and newer GPUs".. Does this means the installer will install the correct driver for y GT 9500 or do I keep flipping the pages until I find a 9xxx? ..also would the "nvidia-gfxG02-kmp-desktop" be the correct one to select for my system?
View 2 Repliesfind a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.
View 4 Replies View RelatedIs there any way to turn off desktop flipping in Enlightenment. It is getting extremely annoying being suddenly switched to another desktop when my mouse pointer touches the edge of the screen.On the Virtual Desktops configuration screen, I have everything I could find related to flipping unselected, but I'm still getting desktop flipping.
View 2 Replies View RelatedI just picked up a 3g modem from T-mobile that I cannot get to work with 10.04Inserting the device and running lsusb gives Bus 002 Device 002: ID 19d2:1201 ONDA Communication S.p.A. I installed usb-modeswitch but I don't know how to configure the usb-modeswitch.conf I know I need to provide the default vendor and product as what is given above vendor=0x19d2 and product=0x1201 but I don't know what to put for the target vendor and product. I'm sure vendor is the same 0x19d2, but the product.. I don't know what to put for the target product so the usb storage will flip to usb modem.
Or maybe I'm completely wrong about how I'm going about this.I've researched this numerous places:[URL]nd I can see the basic idea of how to proceed, but I think I'm stuck at flipping the device from storage to modem mode.I've got 14 days to return this thing if I can't get it to work. I'm willing to mess around for all 14 of them if we can get this to work and help out any other ubuntu users who want to buy this device.
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies View RelatedI cannot find the C library manual pages on fedora 11. Are info pages the same as man pages?
or how can I install man pages so that I can use man 3 malloc?
Today I received as a gift a 5 years old Gateway 500X CPU which is apparently dead due to a faulty motherboard (I still have to troubleshoot it, of course).
Even in the cause I can fix it, odds are I'll prefer to make the aforementioned CPU a donor for my other machines, instead of resurrecting an old Pentium 4 (no HT) system.
Being this the case I checked the parts for possible transplants:
512MB DDR PC2700 memory module (useful right off the shelf for my main desktop system).
120GB Maxtor IDE hard drive (also useful, assuming it is in working order).
128MB AGP8X NVIDIA GeForce4 MX440 graphics card.
On this last part (the graphics card) I have my doubts as of where to use it. My main desktop system already has an NVIDIA card: FX5200, 128MB, which is newer. The thing is that I've been doing some homework comparing both the MX440 and the FX5200 and get mixed opinions: for one thing the FX5200 is the latest of the two with some advantages like support for a later DirectX (which for Linux is pointless) and other things, but the FX5200 is also reported to be technically inferior to the MX440.
In your opinion/experience which card is a better performer? Should I expect a performance gain if I were to replace the FX5200 with the MX440?
Would a Nvidia Geforce 4 graphics card be supported for openSUSE? My friend gave me it, and said that it was. But he doesnt use Linux.
View 4 Replies View RelatedI have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedIt seems to me that the default driver in the Nvidia repository does not support my card (GeForce GFX 550 ti). Does anyone have any recommendation on how to proceed?
openSUSE 11.4 64-bit (Gnome)
Intel Core i7-2600 3.8GHz Turbo2.0, Quad Core, 8MB cache, 8xHT, 5GT/s BUS
GIGABYTE PH67A-UD3-B3 Sandy Bridge 2xPCI-E2.0
8GB DUAL DDR3 1333MHz Mushkin
I just installed OpenSuse 11.2 and I can't change my resolution. That max it will give me is 800x600. My display card is GeForce 6150 LE. Is this a known problem and can I do anything about it.
View 3 Replies View RelatedI am having a challenge to install drivers on this machine with the OS and graphics card stated in the subject. To date I have tried different ways and they are broken in the steps or in the results I get on my machine. The how-to written by ajohnw Installing an nvidia driver - easiest I have found to date. results in a file or directory not found when I try to execute
Code:
/etc/bin/nvidia-xconfig
The article SDB:NVIDIA the hard way results in the following error (copied from the error log):
Code:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist.The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured.
Researching how to resolve that error and I can't find anything relevant to openSUSE 11, closest version being openSUSE 9.Lastly, I've tried this SDB:NVIDIA drivers and for some reason it does not generate the xorg.conf file. At least that's what I am concluding. I go through the steps, reboot the system and boot only to a command prompt. Navigating to /etc/X11/ there is no xorg.conf and I have to copy xorg.conf.install to xorg.conf to get back into the Desktop.
I've been at this problem for a few days now, and I think it's time I give in and ask about it, because I am at a loss.For all intents and purposes, my computer is a homemade one with these specs
Asus M2N68-AM Plus Motherboard
AMD Athlon II X2 260 3.2Ghz
2GB DDR2 RAM
NVidia GeForce 8800 GTS
I am running OpenSuse 11.4, previously with GNOME 3 but on reinstall of the OS I have reverted back to GNOME 2 and I only want to update once this mess is out of the way.I'm doing a bit of a project, and one of the requirements is that I be able to connect to my TV. I made my own S Video to RCA cable to run out of my PC and into the TV. I tested that on the day I made it with a Windows laptop, worked fine.
Beforehand, my computer was running out of the DVI port into a monitor perfectly, so I can safely assume it is not my graphics card. When I plugged my S Video to RCA cable in, everything looked fine at boot but when it came to booting OpenSuse, X.org failed to start, although I wasn't around to see the error message (I now know that it was "x server failed maximum number of times" or something of that description). I tried startx on the command line only to get a "no screens found" error or something similar. The only way I could get it to successfully start was to revert to the xorg.conf.install file, which wasn't ideal and GNOME 3 had to run in fallback mode.
I did not like the fact that my graphics card wasn't running as well as it could. Nevertheless, I tested a few things, and found that a little Java program with LWJGL could not run, Xlib threw this error at meXlib: extension "GLX" missing on display ":0"So xorg.conf.install is no longer an option. I tried a variety of other troubleshooting options, first recommended by the OpenSuse wiki and then all sorts of xorg.conf edits. I've tried running nvidia-xconfig but the configuration it gives me the same error, I have tried X -configure, only to get the same error.
As a last resort I reinstalled OpenSuse 11.4 hoping that its automatic configuration would solve the problem. It sort of did. Now when I run anything when my xorg.conf file is not xorg.conf.install it successfully starts X.org the first time, and if I shut down and reboot within 10 minutes of it shutting down, X.org refuses to start. I did more searching around and found that I could specify S Video out through xorg.conf. I went back to the xorg.conf.d directory by deleting my xorg.conf file and changed my xorg.conf.d/50-device.conf to this
Code:
Section "Device"
Identifier "Default Device"
#Driver "radeon"
Driver "nvidia"
[code]....
Which I honestly thought would work, but I got the same error again. That's about the end of my story, if you want any more info just ask. I think it's a bit odd that no matter what I change my xorg.conf/xorg.conf.d files to I always get the same error and not a plethora of different ones.
I just bought a new system with NVIDIA GeForce 9100 integrated graphics. I used [URL] to install the NVIDIA drivers and utilities. If I use sax2 from the commandline in runlevel 3 (or from KDE) and select LCD 1680x1050 for the display, I am able to test and save the configuration. If I then init 5, KDE starts with the proper display settings. NVIDIA X Server Settings tool shows that I have a Gateway FPD2275W(which is what I have) with display dimensions 1680x1050.
I even have the option to change the refresh rate to 75. I never told the configuration tools what kind of monitor I have, so something detected it. The problem comes when I reboot. The display reverts to 1280x1024 which is not correctly proportioned for my display. The NVIDIA tool then shows some kind of generic monitor, and does not give me any options to configure the display correctly. My system has an AMD Phenom(tm) II X4 820 Processor.
I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.
View 6 Replies View RelatedI installed Opesuse 11.2 and I manged to install the Nvidia driver and it works fine. Then I enabled the Compiz and it works fine. During the Opensuse 11.2 installation I installed the XEN becuase I wanted to run multipile XEN guest, I have Nividi GeForce 9600 GT and I have 8 G of RAM and 1.5 TB.
When I decided to boot from XEN mode, it do not boot and it went to the terminal, I logged in I tried to install the Nivid driver in XEN mood and I wan in the init 3, it says:
The NVIDIA driver does not currently work on Xen kernels. If you are using a stock distribution kernel, please install a variant of this kernel without Xen support; if this is a
custom kernel, please install a standard Linux kernel. Then try installing the NVIDIA kernel module again.
I tried with the following Nvidia Driver;
After installing the above driver in normal kernel (non XEN kernel), it works fine but as soon as I boot to the XEN mode it just goes the terminal.
Kernel info:
The X11 fiel :
It must be some wrong with my installation or is there any patch for that.
On openSUSE 11.1 I was able to configure KDE 4 for 2 monitors with sax2 (although the resolution was bad).On 11.2 neither SAX2 nor KRandR seem to work. The KDE User Guide says that a driver supporting version 1.2 is necessary. However the nvidia driver for eForce FX Go5200 seems to support only version 1.1.Is there a way to use both monitors with SUSE 11.2? I am quite desperate since for my work using only 1 monitor is definitely a handicap.
View 5 Replies View RelatedI did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?
View 4 Replies View RelatedWhen i start the install of the open suse linux 11.2 load the kernel but later my display is in black, i think that is my graphic card becouse in other linux only load linux without graphic mode, what i have to do for install open suse?, i can download a driver with the installer or something like?
View 4 Replies View RelatedI installed apache2 with 'zypper in apache2 apache2-doc' and there's no man pages,
tried
man apache2
man apache
man httpd
I just added a new NVidia graphics card (PCI) that's 512 RAM, DDR2, the GeForce 8400 GS. OpenSUSE boots fine and shows the desktop but it tells me I cannot enable desktop effects, which should be no problem with this computer and card.
Computer Processor/RAM:
AMD Sempron(tm) Processor 3100+
Speed: 1,808.49 MHz
RAM: 1.4GB
Swap: 2GB
[Code]....
I changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?
View 1 Replies View RelatedI have seen where people refer to the 'man pages'. Where do I find the "man pages"?
View 7 Replies View RelatedI'm looking for an easy solution (1 click install) to scan multiple pages to one pdf file on openSUSE 11.2 with gnome.Most tools only support 1 page tobe scanned to pdf.gscan2pdf looks like a solution but I can't get it running on 11.2.(missing dependencies e.g. perl-forks)
View 9 Replies View Relatedi use firefox for a long time, but today in opensuse he just stoped working without any reasonable reason! The only page he opens from now on is my default page... when i try to go to other ones appears this error message: "by the way the server is redirecting you, you will never reach your destination" or something like that. After this, says that this may be caused by blocked cookies... the problem is with my firefox, cause konqueror is working ok!
View 9 Replies View Relatedi recently got a logitech clearchat pro headset for christmas. i configured it as the primary soundcard and, after i select it as master channel in kmix, it works perfectly.the problem now is that whenever i want to listen to sound on webpages (ie. videos) through anything but the headset, well, i can't.it seems now that browsers don't recognize that the headset's been unplugged, so they still try to play through the empty usb port. system sounds and amarok recognize when the headset's not there - the system says, when the logitech's been unplugged, that it "no longer works, falling back to hda intel" - but the web browsers, mozilla firefox and google chrome, don't produce any sound.
i've tried changing "hda intel" back to the primary sound card, but then the system doesn't automatically switch to the logitech headset when it's plugged in because it's not of "higher priority".
i have an Brother HL-2040 and normaly all pages print fine. But i noticed that some pages from pdf file won't print.The driver says it failed.Can that be, that my driver has some problems? I tried others but they don't print anything.I have the current opensuse 11.2 version and the latest cups version.
View 1 Replies View RelatedI just finish installing 11.3. Everything works perfectly expect few issues with my display setting. I've installed SUSE on my laptop Acer Aspire 5920G and I got Samsng 226BW as my second display. How can I change the resolution of my Samsung display to 1680*1050? currently set as 1024*768 and I can't change it. Do I need to update my NVIDIA driver? if so how can I do that? finally, If I get this fixed how can I set my Samsung to be the main display?
View 1 Replies View RelatedIs there any possibility to view the web pages that request the installation of Microsoft Silverlight?
View 3 Replies View Related