OpenSUSE :: Fresh 11.3 KDE 4.4 Can't Print From Firefox?
Dec 31, 2010
I have a fresh install of 11.3 KDE 4.4 and am trying to set it up to print via CUPS over the network. The printer tests OK from the YAST set up page and will print fine using OO. The HPLIP icon is showing in the system tray.
When I try to print from Firefox the printer is never discovered and Firefox quits responding so does Thunderbird when you try to print an email. Kwin pops up a message about terminating the application which you have to accept. Konqueror just locks up when you try and print from it and you are forced to kill the application.
Printing works perfectly on the Host machine regardless of the application used.
This is a real showstopper here. It's the wife's new machine and she must be able to print from Firefox and Thunderbird.
View 9 Replies
ADVERTISEMENT
Feb 5, 2010
I cant print in firefox 3.6 by cups. Whe i go to file print i see the printers. The file is send to the wright printer. Printer crasch. I look on internet en found a solution. Firefox can only print to file. I had to add gtk-printer-backbands ="lpr,file" in /etc/gtk-2.0 in the file gtkr. and restart cups When i co to the printers i don't see the printers but only lpr. When i klik print the page wil print but only to the defualt printer. Is there a solution the fix this error. Ore how can i give the commando lpr -p printername. I try this on command line I make 2 printqueue's to the same printer and when i give echo "text" | lpr -p printername it works How can i change the gtkr file to have the posibility to slect the printers
View 2 Replies
View Related
Feb 16, 2011
I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies
View Related
Oct 31, 2009
I just installed F11KDE, and I am trying to get it to run Flash content in Firefox. I have been searching for solutions for well over an hour and have found nothing that works. How can I get my installation of the Firefox browser to play Flash content. How do I install it? I have tried
# yum install flashplug-in or something to that effect, as well other attempts of different varieties, i.e.-rpm, yumex. Nothing is working.
View 5 Replies
View Related
Dec 25, 2010
Just as in the title. Would like a pdf that looks exactly like the website. Graphics, CSS and all. 'Print to file' printer available does not do this.
(Ubuntu:10.04,firefox:3.6.13)
View 7 Replies
View Related
Feb 5, 2010
Firefox 3.6 won't print with cups.
I'v found on this ore other forum a sollution But is there a better one.
I must add the line
But hen i can only print to the default printer.
Then i have to do lpoptions -d printername to set the other printer default.
it is good for now but looking fort better solution.
View 5 Replies
View Related
Dec 21, 2010
I have been at a loss to figure out what is wrong with firefox this time. But I updated to 10.04 because I was two updates behind and now I still have 1 issue I haven't figured out. It isn't huge, but just annoying. I can't print from firefox. I have a wireless printer hp officejet J4680, and get the following error in the messages log.
Not sure what the translation for this is. This is what I get when I try to print from firefox. Opera works, office works, just doing an lpr command on something I had firefox save to a file works. So I don't think it is drivers, the update or anything else outside of something again ridiculous firefox doesn't have working yet. Anyone run into this or know where the patch is. I haven't been able to find anything. Have tried purging cups reinstalling. updating firefox etc. just nothing hit the target. Like I said firefox is the only thing not working. I can print from opera and office.
View 3 Replies
View Related
Dec 6, 2010
Many years ago I was able to print a listing of bookmarks in Mozilla browser. I would like to do that again.
The problem is that I'm now using Firefox 3.6.12 and can't find anything in the menus to allow this. I've tried cut and paste from the organize bookmarks view but it doesn't work very well, loosing formatting.
method to obtain a printed listing?
View 14 Replies
View Related
Nov 4, 2010
I get this segmentation fault if I want to print.
Code:
/run-mozilla.sh: line 131: 27751 Segmentation fault
"$prog" ${1+"$@"
I tried firefox 3.6.x .3.5.x 4.x, perhaps it's necessary to know that I've GSB installed. I didn't understand this.
View 4 Replies
View Related
Jun 28, 2010
Well, that's about it - the firefox and thunderbird packages included on the first batch of official 13.1 updates keep crashing when I try to print a web page or an e-mail. Seamonkey, updated as well, can print as usual.
View 14 Replies
View Related
Oct 27, 2010
My System spec is::Ubuntu 10.04/Kernel 2.6.32-25-generic #45-Ubuntu i686 GNU/Linux
gnome::2.30.2. Laptop - Dell E6400. today I updated it, the problem I'm facing occurs even before update so update is not the cause.till yesterday night every thing worked fine.Problem::>>When ever i try to print from firefox/Chromium/Gedit the print dialog appears shows just print to file and hang up !>>I checked in System->Administration->Printing and it shows list of network printers(I'm in Lan). Even i can successfully print from gvim/writer.>> once i left that dialog box left open, may be around 10 min latter i saw the list of printer but when i tried again same thing- Hang I even checked with cupsd it is running normally.Admin team just solved the problem it was due to the shared printer option enabled in System->Administration-Printing.Hope the shared printer call was delaying too much to cause hang.
View 1 Replies
View Related
Feb 17, 2010
There is the option to select a "printable form", but the form is much larger than any paper the printer supportsIf I use "Print Preview" in Firefox, it creates only one page that contains the beginning of the form, and ignores the rest of the form.If I do the exact same thing on a Windows machine, Firefox creates as many pages as necessary when I click "Print Preview"I feel that this problem is not because of Firefox, but because of how "Print Preview" works on Ubuntu.How can I get the print preview to create additional pages to include the entire text when I click "Print Preview" ?
View 3 Replies
View Related
Jun 8, 2010
We have a lpr server for printing (not CUPS for compatibility with complicated domain/systems). We configured our linux systems -- RHEL4, RHEL5, and Ubuntu 10.04 -- so that lpr is one of the gtk print possiblities by adding 'gtk-print-backends = "lpr,pdf,file"' to gtkrc. This works great for several gtk-enabled applications like Acrobat Reader (acroread).
However, Firefox 3+ (tested 3.6.3 & 3.0.19) doesn't actually queue any lpr jobs until after quitting the application.
View 1 Replies
View Related
Dec 20, 2010
This may be a no brainer and often repeated questionBut i will ask again.I need to install XP and openSUSE 11.3 onto a fresh diskShould i install XP first and then SUSE or the other way around
View 9 Replies
View Related
Mar 10, 2010
After a fresh 11.2 KDE install on a second PC, the starting desktop exhibited a transparent panel, with "Desktop Folder" as a title, and five (5) icons. In the course of modifying the desktop icons, this was deleted. I have looked, searched, Google'd etc, to find a process to restore this transparent folder. No luck so far. I have placed the icons back, all works correctly, though I would like to know how to recreate this transparent rectangular panel. (My other two Linux PC's are Gnome (one openSUSE 11.2 and one Ubuntu 9.10).
View 5 Replies
View Related
Sep 27, 2010
Just installed OpenSuse 11.3 kde version on my laptop. After install added few repositories and updated the system. Now the whole desktop looks very polished however problem started after that. When i tried to open Dolphine, Fire fox, Terminal or for that mater any application nothing happens. None of the applications opened successfully. Then i tried to configure plasmoid widgets and for my surprise all worked fine. With this problem i can not login to opensuse desktop.
View 2 Replies
View Related
May 19, 2011
Just moved from 11.3 to 11.4. I have an Intel DX58SO MB with an I7 cpu. Upgrade failed, so did a fresh install from the dvd media. For what ever reason, it did not detect multiple cpu's and I am running on 1! ??? What is going on, and how do I fix this? I'm suspecting a bug at this point, but will hold off until I can get some validation, or input.
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
[code]....
View 9 Replies
View Related
Jan 13, 2010
If I low level formatted a drive, then created a partition table, and installed Linuxes with their bootloaders *only* on their root partitions, would the one with the bootable flag set boot?
To put it another way; does the process of creating a partition table using Linux tools put generic code in the MBR?
View 9 Replies
View Related
Sep 11, 2010
Following some problems of kernel upgrade, I have resinstalled my system. I now have some issues with sound. CD are recognized and played but no sound is coming out of my speakers (tested with amarok and caffeine). Same thing on .....: I see the video and get no sound.
However, I can hear the test sound form Configure Desktop / Multimedia
Any clue about what is going on?
View 8 Replies
View Related
Aug 12, 2010
I have a fresh install of openSUSE 11.3 (gnome) on my Dell Opxiplex380--but no sound... The hardware works because I can swap a Windows SATA HD into the CPU and test it. My alsa-info file is here: [URL]...
[code]....
View 9 Replies
View Related
Mar 10, 2011
Just installed OpenSUSE 11.4, and so far I love everything about it, the only thing that's not working is the sound. I have my sound card setup in YaST -> Sound like I always have, and it recognizes it as M-Audio Delta Audiophile 24/96. I also installed alsa-tools-gui to get Envy24Control for ICE1712 chipsets, and I unmuted all the outputs, and raised the DAC volume. My speakers are on, and all the cables check out. Here is all my multimedia information:
[Code]....
View 9 Replies
View Related
Mar 14, 2011
After spending a full day messing with my dual monitors displays-should-not-be-cloned-by-default, I have now come to the sound. The config looks like the 11.3 setup (I alternate partitions from one install to the next), but all I get is silence. KMix won't run. Amrok is silent. "Sound Configuration" gets me to a window showing two cards I know nothing about. I've got an nVIDIA chip on the mother board and the two cards listed are "M2N72-D w/ snd-hda-intel" and "Creative Tech, Ltd. w/ snd-usb-audio". I'd have gone back to 11.3 where this stuff works, but my configuration files were all auto-updated and don't really work any more. I guess I ought to have archived the config files, but I didn't and I'm here now.
lspci shows:
Code:
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
and some /var/log/messages entries:
Code:
Mar 14 14:18:22 beethoven kernel: [ 1120.311164] usbcore: deregistering interface driver snd-usb-audio
Mar 14 14:18:22 beethoven pulseaudio[21051]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:22 beethoven pulseaudio[21102]: pid.c: Daemon already running.
Mar 14 14:18:22 beethoven kernel: [ 1120.800722] usbcore: registered new interface driver snd-usb-audio
Mar 14 14:18:38 beethoven pulseaudio[26008]: pid.c: Daemon already running.
Mar 14 14:18:39 beethoven pulseaudio[30854]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:40 beethoven pulseaudio[30904]: pid.c: Daemon already running.
Mar 14 14:19:40 beethoven pulseaudio[30854]: ratelimit.c: 7 events suppressed
Mar 14 14:21:39 beethoven pulseaudio[30854]: ratelimit.c: 44 events suppressed
Mar 14 14:35:11 beethoven pulseaudio[30854]: ratelimit.c: 176 events suppressed
Mar 14 14:46:35 beethoven pulseaudio[30854]: ratelimit.c: 38 events suppressed
with duplicate events suppressed with ellipses by hand.
View 7 Replies
View Related
Jan 6, 2011
I have installed Suse 11.3 on my computer yesterday but since then I have been trying to update it but unable to do so. Everytime I try I get this error message: "system management is locked by the application with pid 6953 (usr/sbin/packagekitd). close this appliaction before trying again."
View 8 Replies
View Related
Apr 19, 2011
I installed openSUSE 11.4 today and I have a problem. After login, KDE Plasma hangs for about 30sec and I can't do anything. The keyboard and the mouse are working, but if I click, I don't get any response only after about 30sec.
This is a fresh install, 32bit, I'm using only the Oss, Non-Oss and update repositories and the system is up to date.
I have an nvidia 9500M GS graphics card, first I thought it is a driver bug, but I tried both the stable 260.19.44 and the latest 270.41.03 drivers, and was no difference.
I made an another user to try with a clean kde, but the same happened.
I have nothing in my Autostart directory, and I cleaned also the /etc/xdg/autostart dir, leaving there only the pulseaudio related files.
View 5 Replies
View Related
Jun 2, 2010
I have tried to install openSuse several times and the same problem would persistRight after installation, when the prompt to log in shows up, I enter a username and a password, but it says that login failed. I am sure I type in the correct data as I have written down the username and the password I register during the installation.Also, after the installation finishes, the computer restarts automatically, though instead of restarting it goes into a mode similar to stand by. The screen is blank and the media buttons of the keyboard are lit, but nothing happens, so I just restart manually. Could this have something to do with it
View 2 Replies
View Related
Nov 17, 2010
Just completed a fresh netinstall of OpenSUSE. This machine previously had a Ubuntu install on it, but I was having all sorts of issues and decided I required a fresh start. The install itself went acceptably, although I ended up manually fixing GRUB.Now the system is running, I've got a ridiculous problem, in that I'm still seeing the old hostname- It used to be ubuntu-server, but should now be unimatrix-001.Checked both the obvious places (/etc/HOSTNAME & YaST), but the correct hostname is in both of them.
View 5 Replies
View Related
Nov 13, 2009
Newbie here, but I'll attempt to display all the information requested in lwfinger's sticky:
/sbin/lspci yields:
Code:
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN
[code]...
View 9 Replies
View Related
Dec 23, 2009
I just did a fresh install of 11.2 on my Thinkpad (previously running 11.1) and am having trouble with getting wifi to work properly. My wireless will not connect reliably. Sometimes it connects after reboot but then drops and will not reconnect. Below in line 4 of the status query you can see that it says DHCP4 client NOT running.
ifstatus wlan0 wlan0 device: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) DHCP4 client NOT running wlan0 is up 5: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
link/ether 00:13:02:4e:66:38 brd ff:ff:ff:ff:ff:ff
Configured IPv4 routes for interface wlan0:
default 192.168.1.1 - -
[Code]...
View 9 Replies
View Related
Jul 19, 2010
From my lspci output I get Broadcom 4313 and 0x14e4:0x4727It appears that Broadcom supports this card with their Linux STA driverBroadcom.com - 802.11 Linux STA driver guess on that page mine is 4313 2.4 Ghz 0x14e40x4727 Dell 1501even though my notebook is Toshiba.Then they say that the driver is included with Fedora and Ubuntu but nothing about OpenSuse. Then they go on about compiling the driver myself. I'm pretty sure the modules required for compiling drivers are not available on a fresh install and without Internet connection.Is there an easier way to get the driver? Could someone knowledgeable make some .rpm that I can download on another machine and put on a USB stick? Or do I have to wait until Suse developers get to it?
Or could someone make wl.ko file they are talking about on Broadcome Readme? It looks fairly easy to install the driver, if I knew exactly what to disable/blacklist and what security module to load.Another thing I got from dmesg, not sure if it's of any help, was that for this card pci entry that goes like 07:00.0 there's "support D1 D2", then "#PME supported from D0 D3hot D3cold" then the next line "#PME disabled". I've searched this forum but the only time 4313 was mentioned when someone made a mistake with the model number
View 9 Replies
View Related
Dec 6, 2008
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
View 8 Replies
View Related
