How do I go about changing the fan speed? My laptop is running hotter than normal and although its not melting the case I'd rather turn the fan up to increase cooling if possible. Noise is not a concern as I normally have music playing anyway.
View 8 RepliesI'm running openSUSE 11.4 with GNOME. I have an EVGA nvidia GTX 285 installed, which is equipped with a variable speed fan. I'm running the nvidia driver package which includes the nvidia X Server Settings utility. The utility allows me to view the fan speed as a percentage of its maximum speed but does not allow adjustment. It appears that the speed remains at the card default of 40% regardless of GPU or card temp. When running certain graphic-intensive applications my card runs quite hot (sometimes >70 degrees C). Although this isn't hot enough to burn the card up in the short term, it is certainly hot enough to shorten my video card's lifespan.
So, the question is how do I set up my system so I can increase the fan speed to 50% or better yet, get it to increase as the GPU temp increases? The nvidia X Server Settings help indicates that fan speed is adjustable after enabling coolbits, but coolbits is not installed on my system and is not available from the default repositories. What is the easiest way to obtain, install and enable coolbits? I have no intention of overclocking my card. It was too expensive to risk damage to the card.
I cannot get any fan information from 'lm-sensors' or 'sensors', I tried to run 'pwmconfig' and got this:
Code:
Code:
But I have no tools to control the fan speed from 'acpi'. in particular '/proc/acpi/fan' is an empty directory.
There are no fan info/controls in BIOS either.
I believe the fans do not work as fast as they should and I am trying to find a way to fix this before the cpu cores are melted down from overheating.
Laptop information: HP Pavilion dv2500t
Code:
How can i control Cpu fan speed in fedora. I am found a similar forum in Archinux, just tell me as to how to do it in fedora. [URL]
View 1 Replies View RelatedI have a Intel Core 2 Duo 1.86Ghz CPU and I have attached a Zalman heatsink & fan to it for extra cooling. However, the default fan speed is very high and it is too loud and definitely unnecessary. So I use this program in Windows called EasyTune5 (which is for gigabyte motherboards, the brand my motherboard is) and I can set the default speed to zero or 1. There are values between 0 and 100, 100 being full speed of the fan. Setting it to a low value like 0 or 1 makes it very quite. Of course the speed of the fan goes up when the CPU heats up or is being utilized more BUT most of the times during idle, its back to being really quite.
Does ubuntu have any software that can do this? I know there are software to check the cpu temp but i need one to actually control the default fan speed.
Is there any way we can control the speed of pvmove??
View 1 Replies View RelatedI got a new computer and got it running Slackware64-current. It's motherboard is an ASUS M4A88TD-M and it's processor is an AMD Phenom II x4 965. I decided to get some chassis fans to improve it's thermal performance. But, since I started the computer after installing the new fan (only one of the 3 I got) the fan's speed is at max and it's very noisy. I'd like Slackware to control it's speed according to temperatures from lm-sensors. Output of # sensors-detect can be found here. Kernel is stock -current 2.6.33.4. Output of # lspci is here.
Code:
gtl@coruscant:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.31 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.08 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 2170 RPM (min = 600 RPM)
CHASSIS FAN Speed:3409 RPM (min = 600 RPM)
CPU Temperature: +40.0C (high = +60.0C, crit = +95.0C)
MB Temperature: +32.0C (high = +45.0C, crit = +75.0C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0C (high = +70.0C, crit = +99.5C)
Is it possible to control the speed of the CPU fan in my desktop computer? The CPU runs cool at 30C yet the fan sits around 2700rpm and the BIOS doesn't allow for speed control.
View 4 Replies View RelatedI have problem with funs speed in my fujitsu rx100 s6 server, rpm funs is 3000 ? I think it is not standard speed funs. On windows 2008 server funs works quietly. Fujitsu supports only windows servers, red-hat enterp. and suse enterp. Is there any software to control speed fans?
View 6 Replies View RelatedI installed Karmic 64-bit on a new Phenom X4 Quad-Core PC. I've replaced the stock CPU cooler with a Cooler Master Hyper TX3, enabled all fan control settings in the BIOS, switched their profiles on silent, enabled the Cool n' Quiet option as well but my CPU fan is still noisy and seem to be running up to the max number of RPM, thus ignoring BIOS specifications. Besides this I can tell there is something wrong with it since even the CPU is on idle or with just the regular browsing, media player operations, PC sometimes freezes or is automatically rebooted .
I installed lm-sensors and went through all the sensors-detect operations (output attached to this post) but it doesn't show anything else but the CPU and HDD temperature which is always 40 Celsius degrees.
Just installed the latest ubuntu on my PC. When I was running windows I had a tool called asus smartdoctor which allowed me to vary my video card fan speed. I really need to increase this fan speed as my video card overheats. Is there a unbuntu compatable program that would allow me to change the fan speed or do I need to install Wine and run smart doctor that way?
View 4 Replies View RelatedI'm trying to control the fan speed on my laptop (IBM Thinkpad T43.) I used lsmod and saw that the thinkpad_acpi module was already load, but I know I need the fan_control=1 option so I did this:
$modprobe thinkpad_acpi fan_control=1.
Then I did: $echo level 7 > /proc/acpi/ibm/fan
and I get an error: write error: Invalid argument
I'm not sure what I'm doing wrong here, Also, if I wanted to load the module thinkpad_acpi at boot time with the fan_control=1 option, should I add it to /etc/rc.modules? In other words, does the rc.modules file override udev? And do I need to remove the module before reloading it with the fan_control=1 option?
I really need some control over my fan speed, as it seems by laptop is running rather hot.
I've installed f11 on my machine and am wondering how to control the fan speed for my graphics card, its a asus EAH4850 (single slot, fan starts automatically at around 10% speed).
The card goes at around 85 degrees Celsius with stardard speed with no 3d, and 110+ when running any 3d application, wich then causes it to not respond. i have to set it to around 60% speed for safe temperature.
I'm used to windows, there i could either use the asus smart doctor or the catalyst control center to adjust fan speed, i'm looking for a linux alternative.
I have a Radeon 3870 (rv670) that seems to work great with fc13 out of the box, with one exception. The stock fan is constantly running full speed. It's too loud. Proprietary drivers don't support fc13 yet. Has anyone found a way to make this work?Edit: The best I could do was switch to ubuntu, install fglrx and then issue the following cli commandCode:aticonfig --pplib-cmd "set fanspeed 0 15"
View 1 Replies View RelatedI have an ATI Radeon HD 4850 running on Arch Linux with the xf86-video-ati driver.
Is there any way to control the fan speed (from a conf. file, the command line, whatever) or should I change to the Catalyst driver?
Are there any linux applications that will allow me to adjust the hard drive RPM rotational speeds? I've used similiar programs for windows before but now I am running a linux setup.
View 9 Replies View Relatedhow to control the speed of the fan in my laptop ? i use ubuntu ...i don't seem to use it to full power and it is always cool .. it makes lots of noise.i don't know what to say for commands i've run . i tried lm-sensors but it says command not found. sensors gives me some output and "temp1" which say +69degrees maximum 89 ..i used the search function but it just gave me some unsolved threads.
View 2 Replies View RelatedI often run my ubuntu as SSH server only so i stop GDM when i do that, but i found out that after i stop gnome, my ATI gpu fans spins up like crazy and sounds like a jet plane, (i have ati closed source driver installed) i am worried to leave the fan on like that, so i have to start a X session again. Then the fan slows down I would like to be able to have slow fan speed when i drop to text mode only, one is its light weight, two is for security
View 3 Replies View RelatedSince a while,the energy-saver shuts down the screeago,it happens after half an hour,but I didn�t set it up in that orders !It makes menervous,short time away from the comp,and soon the screen is dark!And the screensaver will not appear any more,too.I tried to enlarge the times in the energy-manager,created a new profile,switched off the laptopmode-service,nothing helps!And it seems,if there is no possibility to set one of the profiles up,they can only be changed,deleted or newly created.Is there really no place to force it to the required settings?Under the good old KDE3.5,it was no problem,to get it work like I want it to.My 64-bit system runs under openSUSE 11.3 and KDE 4.4.Is here any salvation for my nerves
View 3 Replies View RelatedDoes anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,
max : 420 kB/s
ave : ~ 200 kB/s
After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:
1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.
2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,
max : 140 kB/s
ave : ~ 80 kB/s
Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
View 1 Replies View Relatedi both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
View 5 Replies View RelatedI would like to see fan-speed in my laptop. I have installed OpenSUSE11.2 with KDE4.3.4
I only find apps/plasmaoids that read temperatur, but not fan-speed. Does it exist?
I have a dual boot with xp and opensuse 11.4. There has been an annoying 'system fan has failed' error message that was dealt with by replacing a fan and installing speedfan and hardware monitor on the windows partition, but my opensuse installation has no such programs running, and I want to keep things cool while I'm running opensuse. Speedfan is a program that tells the fans to turn on and off. Usually according to the temperature that the sensors are reading. The program shows temperatures and fan speeds and allows you to have control.Is there a fan speed/temperature monitoring program for opensuse?
View 7 Replies View RelatedI'm new to openSUSE and my computer is quite slow although my computer isn't that bad. I opened up ksysguard and it appears that my CPU is the bottleneck. My CPU usage is usually 100%, then after a few seconds, it goes down to 20-60% and then it goes back up to 100% after another few seconds. It says I have 141 processes running (I don't know if that's normal or not).
My Specs are:
CPU: AMD Duron (tm) processor 1.8GHz
Graphics Card: NVIDIA GeForce 6200
Memory: 2GB RAM
I'm using KDE.
My touchpad has a great speed/acceleration on the Horizontal axis, but a quite slow one on the Vertical access. I went to Settings (KDE4) and made everything default. The logged out/in. Same problem. What can I do? I did a kernel upgrade yesterday, is that related?
uname -a inux cheetah.site 2.6.34.7-0.4-desktop #1 SMP PREEMPT 2010-10-07 19:07:51 +0200 x86_64 x86_64 x86_64 GNU/Linux opensuse 11.3, kde4.
I'm trying to transfer some files to my USB stick, and it's transferring at the most pitiful rate, around 200-400kb/s, occasionally shooting up to 1MB/s, but not for more than a few seconds.
I realize a lot of factors can play into this, so I'll try to provide as much detail as I can.
I'm using OpenSUSE 11.3, KDE 4.6 RC2, and a Corsair Mini Voyager 16GB. My motherboard is a Gigabyte EP45-DS3L.
dmesg output:
Code:
lsusb -t output:
Code:
Sometimes too, the transfer just stops all together. It just... doesn't transfer for a while, then it'll go back to 400kb/s etc, then it'll stop again for a minute.
I'm having very strange issues with OpenSUSE 11.3 KDE LiveCD, mainly performance-wise. Most noticeably, it takes 10-30 minutes to actually boot the system, and it doesn't matter whether the LiveCD is booted from the USB or if it's install into the hard disk. There aren't any noticeable errors during boot, though, except a few "timeout" errors and not being able to lauch VirtualBox Guest Additions (which I don't need since it's not run from VirtualBox anyway).
It takes the most time during the "scanning USB devices" section if I boot from the USB, and during the state where it detects the network card/assigns an IP. In both cases, every dot that appears there takes around 2 minutes. During the boot, the PC seems to be mostly idle, and appears to do something only occasinally, when certain parts of the boot sequence are passed, so that makes boot up feel "jumpy" - nothing happens for 10 minutes, then the PC starts accessing the HDD, then nothing happens for 10 more minutes.
There are other performance problems, noticeably during installation to HDD (through the Install option from the CD startup menu - it's quite a bit faster when started from the running LiveCD). For instance, it takes around 5-10 minutes to make the screen where you need to choose the language and keyboard layout responsive. The performance, in both cases, seems to be inconsistent - sometimes it starts booting and responding quickly, the other times it's really slow, up to the point of outright hanging.
System specs:
CPU: AMD Phenom II X4 925
4GB RAM
HDD: WD Caviar Black 640 GB
GPU: ATI Radeon HD 4890
Are there any easy special tricks to speed up the boot time?Coming from Linux Mint (GNOME), I could get to the Desktop from cold in less than 25 secs.Now in openSuse 11.3 (KDE4.5) it takes more than twice that.Is this a function of KDE or have Ubuntu done something that openSuse hasn't to speed up the boot?
View 9 Replies View RelatedI was a user of openSUSE 10.3. I used to get a decent speed in BitTorrent (using KTorrent 2.2.1) there, since I had earlier used Windows and the speed wasn't as good, even in Windows 7. Recently, I installed openSUSE 11.2 and found that I wasn't getting the good speeds in KTorrent. The overall performance was a fraction of what I used to get in the older Linux installation.
I decided to verify whether my suspicions were justified by again reinstalling openSUSE 10.3. When I did this, I was again able to get the great performance I used to get always with openSUSE 10.3 running KTorrent 2.2.1 I don't know what causes this, but I know that this sad thing really has happened. A newer version is actually not worth it! I hope my voice reaches the openSUSE developers and such bad incidences don't occur anymore.