Server :: Control The Speed Of Pvmove?
Jan 28, 2011Is there any way we can control the speed of pvmove??
View 1 Replies
ADVERTISEMENT
Hardware :: Control Cpu Fan Speed - No Fan Control With BIOS - Acpi - Lm-sensors
Dec 31, 2010I cannot get any fan information from 'lm-sensors' or 'sensors', I tried to run 'pwmconfig' and got this:
Code:
Code:
But I have no tools to control the fan speed from 'acpi'. in particular '/proc/acpi/fan' is an empty directory.
There are no fan info/controls in BIOS either.
I believe the fans do not work as fast as they should and I am trying to find a way to fix this before the cpu cores are melted down from overheating.
Laptop information: HP Pavilion dv2500t
Code:
OpenSUSE :: Control Fan Speed ?
Nov 21, 2010How do I go about changing the fan speed? My laptop is running hotter than normal and although its not melting the case I'd rather turn the fan up to increase cooling if possible. Noise is not a concern as I normally have music playing anyway.
View 8 Replies View RelatedFedora Hardware :: Control Cpu Fan Speed?
Jul 9, 2010How can i control Cpu fan speed in fedora. I am found a similar forum in Archinux, just tell me as to how to do it in fedora. [URL]
View 1 Replies View RelatedUbuntu :: Control Default Cpu Fan Speed?
Sep 3, 2010I have a Intel Core 2 Duo 1.86Ghz CPU and I have attached a Zalman heatsink & fan to it for extra cooling. However, the default fan speed is very high and it is too loud and definitely unnecessary. So I use this program in Windows called EasyTune5 (which is for gigabyte motherboards, the brand my motherboard is) and I can set the default speed to zero or 1. There are values between 0 and 100, 100 being full speed of the fan. Setting it to a low value like 0 or 1 makes it very quite. Of course the speed of the fan goes up when the CPU heats up or is being utilized more BUT most of the times during idle, its back to being really quite.
Does ubuntu have any software that can do this? I know there are software to check the cpu temp but i need one to actually control the default fan speed.
Slackware :: Chassis Fan At Max - No Speed Control?
Oct 4, 2010I got a new computer and got it running Slackware64-current. It's motherboard is an ASUS M4A88TD-M and it's processor is an AMD Phenom II x4 965. I decided to get some chassis fans to improve it's thermal performance. But, since I started the computer after installing the new fan (only one of the 3 I got) the fan's speed is at max and it's very noisy. I'd like Slackware to control it's speed according to temperatures from lm-sensors. Output of # sensors-detect can be found here. Kernel is stock -current 2.6.33.4. Output of # lspci is here.
Code:
gtl@coruscant:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.31 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.08 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 2170 RPM (min = 600 RPM)
CHASSIS FAN Speed:3409 RPM (min = 600 RPM)
CPU Temperature: +40.0C (high = +60.0C, crit = +95.0C)
MB Temperature: +32.0C (high = +45.0C, crit = +75.0C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0C (high = +70.0C, crit = +99.5C)
Debian :: Control The Speed Of The CPU Fan In Desktop Computer?
May 23, 2011Is it possible to control the speed of the CPU fan in my desktop computer? The CPU runs cool at 30C yet the fan sits around 2700rpm and the BIOS doesn't allow for speed control.
View 4 Replies View RelatedFedora :: Software To Control Speed Fans?
Mar 10, 2011I have problem with funs speed in my fujitsu rx100 s6 server, rpm funs is 3000 ? I think it is not standard speed funs. On windows 2008 server funs works quietly. Fujitsu supports only windows servers, red-hat enterp. and suse enterp. Is there any software to control speed fans?
View 6 Replies View RelatedUbuntu :: Sensors Not Working & CPU Speed Control?
Feb 21, 2010I installed Karmic 64-bit on a new Phenom X4 Quad-Core PC. I've replaced the stock CPU cooler with a Cooler Master Hyper TX3, enabled all fan control settings in the BIOS, switched their profiles on silent, enabled the Cool n' Quiet option as well but my CPU fan is still noisy and seem to be running up to the max number of RPM, thus ignoring BIOS specifications. Besides this I can tell there is something wrong with it since even the CPU is on idle or with just the regular browsing, media player operations, PC sometimes freezes or is automatically rebooted .
I installed lm-sensors and went through all the sensors-detect operations (output attached to this post) but it doesn't show anything else but the CPU and HDD temperature which is always 40 Celsius degrees.
Ubuntu :: Video Card Fan Speed Control?
Jun 6, 2010Just installed the latest ubuntu on my PC. When I was running windows I had a tool called asus smartdoctor which allowed me to vary my video card fan speed. I really need to increase this fan speed as my video card overheats. Is there a unbuntu compatable program that would allow me to change the fan speed or do I need to install Wine and run smart doctor that way?
View 4 Replies View RelatedHardware :: Control The Fan Speed On My Laptop ( IBM Thinkpad T43 )?
Jun 1, 2011I'm trying to control the fan speed on my laptop (IBM Thinkpad T43.) I used lsmod and saw that the thinkpad_acpi module was already load, but I know I need the fan_control=1 option so I did this:
$modprobe thinkpad_acpi fan_control=1.
Then I did: $echo level 7 > /proc/acpi/ibm/fan
and I get an error: write error: Invalid argument
I'm not sure what I'm doing wrong here, Also, if I wanted to load the module thinkpad_acpi at boot time with the fan_control=1 option, should I add it to /etc/rc.modules? In other words, does the rc.modules file override udev? And do I need to remove the module before reloading it with the fan_control=1 option?
I really need some control over my fan speed, as it seems by laptop is running rather hot.
Fedora Hardware :: Control Fan Speed For My Graphics Card ?
Feb 5, 2010I've installed f11 on my machine and am wondering how to control the fan speed for my graphics card, its a asus EAH4850 (single slot, fan starts automatically at around 10% speed).
The card goes at around 85 degrees Celsius with stardard speed with no 3d, and 110+ when running any 3d application, wich then causes it to not respond. i have to set it to around 60% speed for safe temperature.
I'm used to windows, there i could either use the asus smart doctor or the catalyst control center to adjust fan speed, i'm looking for a linux alternative.
Fedora Hardware :: Radeon Fan Speed Control In FC13?
Jun 28, 2010I have a Radeon 3870 (rv670) that seems to work great with fc13 out of the box, with one exception. The stock fan is constantly running full speed. It's too loud. Proprietary drivers don't support fc13 yet. Has anyone found a way to make this work?Edit: The best I could do was switch to ubuntu, install fglrx and then issue the following cli commandCode:aticonfig --pplib-cmd "set fanspeed 0 15"
View 1 Replies View RelatedGeneral :: Control The Fan Speed With The Xf86-video-ati Driver?
Oct 16, 2010I have an ATI Radeon HD 4850 running on Arch Linux with the xf86-video-ati driver.
Is there any way to control the fan speed (from a conf. file, the command line, whatever) or should I change to the Catalyst driver?
General :: Application To Control Hard Drive RPM Speed?
Nov 14, 2009Are there any linux applications that will allow me to adjust the hard drive RPM rotational speeds? I've used similiar programs for windows before but now I am running a linux setup.
View 9 Replies View RelatedGeneral :: Control Fan Speed In Gateway M-6848 Laptop?
Jan 15, 2011how to control the speed of the fan in my laptop ? i use ubuntu ...i don't seem to use it to full power and it is always cool .. it makes lots of noise.i don't know what to say for commands i've run . i tried lm-sensors but it says command not found. sensors gives me some output and "temp1" which say +69degrees maximum 89 ..i used the search function but it just gave me some unsolved threads.
View 2 Replies View RelatedOpenSUSE Hardware :: NVIDIA Graphics Card Fan Speed Control?
Aug 13, 2011I'm running openSUSE 11.4 with GNOME. I have an EVGA nvidia GTX 285 installed, which is equipped with a variable speed fan. I'm running the nvidia driver package which includes the nvidia X Server Settings utility. The utility allows me to view the fan speed as a percentage of its maximum speed but does not allow adjustment. It appears that the speed remains at the card default of 40% regardless of GPU or card temp. When running certain graphic-intensive applications my card runs quite hot (sometimes >70 degrees C). Although this isn't hot enough to burn the card up in the short term, it is certainly hot enough to shorten my video card's lifespan.
So, the question is how do I set up my system so I can increase the fan speed to 50% or better yet, get it to increase as the GPU temp increases? The nvidia X Server Settings help indicates that fan speed is adjustable after enabling coolbits, but coolbits is not installed on my system and is not available from the default repositories. What is the easiest way to obtain, install and enable coolbits? I have no intention of overclocking my card. It was too expensive to risk damage to the card.
Ubuntu Multimedia :: Control Fan Speed When Running Text Only Mode?
Aug 23, 2011I often run my ubuntu as SSH server only so i stop GDM when i do that, but i found out that after i stop gnome, my ATI gpu fans spins up like crazy and sounds like a jet plane, (i have ati closed source driver installed) i am worried to leave the fan on like that, so i have to start a X session again. Then the fan slows down I would like to be able to have slow fan speed when i drop to text mode only, one is its light weight, two is for security
View 3 Replies View RelatedSoftware :: LVM2 Pvmove A Multi-pv LV In One Step?
Oct 13, 2010I've a VG that contains one LV which consists of several PVs in a concat. Now I want to pvmove the whole construct to a new set of PVs in one step! Of course I could move PV by PV but is it possible to move them altogether?
View 2 Replies View RelatedCentOS 5 :: LVM - Add The New Big Drive To The VG - Use Pvmove To Move The Smaller PV Onto The New PV
Apr 28, 2011I have a volume group that is made up of a number of physical volumes. I am thinking of consolidating all the small physical volumes onto one big drive. Is there any benefit in this, besides making administration easier? How do I go about doing this? From what I have read, it looks like I should have to do the following
1. add the new big drive to the VG
2. use pvmove to move the smaller PV onto the new PV
3. use pvchange -xn to make sure the old PV can no longer be allocated
4. repeat for all the small PVs.
5. use pvremove to remove all the small PVs
Is this the correct procudure to follow?
CentOS 5 Server :: Improve Server Speed On Servers With Heavy Load?
May 4, 2009There is a tool appeared in repository called ktune; The purpose is to adjust some sysctl.conf settings to improve server speed on servers with heavy load. What is this tool for if one can achieve the same with the configuration file added to system startup? Or ktune is just such file?
View 1 Replies View RelatedServer :: Uplink / Downlink Server Network Speed?
May 15, 2010I got a dedicated server ; datacenter told me that I have a 1000 Mbps Public & Private Networks uplink/downlink . How can I check from console if they are saying the true ?
Also , how can I get info about the server network card from console ?
Ubuntu Multimedia :: Trying To Playback At Double Speed - VLC Will Play The Video At Normal Speed But With No Audio
Jul 23, 2011Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
View 1 Replies View RelatedUbuntu :: Cd Burner Goes To 16 Speed Burning And Up: Cannot Burn At 4 Speed
Dec 20, 2010i both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
View 5 Replies View RelatedServer :: Check Hard Disk Speed?
Nov 29, 2009how can I check if disk devices are running at the proper speed (read/write access)?What are, for example, the correct values for ATA o SCSI device, if I test them with hdparm?
View 2 Replies View RelatedServer :: IPtables And TC To Limit Network Speed
May 14, 2010I am trying to limit bandwidth of certain ip addresses on my server. I have been doing hours of reading and not getting very far... So far I believe the iptables command is
ptables -A PREROUTING -s 178.33.23.44 -t mangle -j MARK --set-mark 2
ptables -A PREROUTING -s 178.33.23.45 -t mangle -j MARK --set-mark 2
ptables -A PREROUTING -s 178.33.23.46 -t mangle -j MARK --set-mark 2
ptables -A PREROUTING -s 178.33.23.47 -t mangle -j MARK --set-mark 2
and now I just need the tc command to read those marks and limit bandwidth, I have a gigabit connection and would like to limit each of these ip addresses to 10mbit in and out.
Server :: PHP Upload/download Speed Tester?
Dec 29, 2009is there any PHP upload/download connection speed test script out there
View 2 Replies View RelatedFedora :: Httpd.conf - Speed Up - And Lock Down Your Server ?
Feb 19, 2010This is not intended to teach you about http.conf and its various options. This guide is intended to help with speeding up your web servers by assisting in protecting them from petty abuse, such as hotlinking and scraping, and by using options that yield better performance in general. The methods used in this guide address general concepts, but the implementations of the methods are completely arbitrary, and are tailored to my needs. Each user may want to make their own modifications to suit their own setup. Again, this is a general guide, meant for instruction purposes only. I will go over each significant section in the file, and explain what it does, and the reasoning for it.
This assumes that you WISH to disable the ability to use .htaccess, and to administrate your websites on the server level. If you have a shared hosting plan then you cannot administrate your server at all, and so some of these sections will not apply to you, but some of them will; the ones that still do, you will place in your .htaccess file, in place of your httpd.conf.
Some of the options in these files are default, and so they may not be explained at all. This thread is more about the non-standard configurations.
Most of these options are standard. Notice that there are extra AddTypes, for things such as .xpi files (firefox plugins, etc), and .ogg video files.
Also take note that we disable the option for .htaccess. This makes a dramatic speed increase. This is because if .htaccess is enabled, then for each request made to your server, apache must look in the directory where the requested file resides for an .htaccess file (it does not matter whether one is there or not, and the lookup is NOT cached, so it much be performed EACH request). If apache finds a file, it must parse it. Then it must look in the parent directory, and in the parent's parent, and so on, until it reaches root (/). This is done for EACH and EVERY request. Disabling .htaccess and administrating your server at the global level will make a dramatic difference on busy servers. On not so busy servers, you may not notice the difference.
Note that we disabled cgi-bin completely. This is because we're running mod_php, so we don't need cgi-bin. If you're not using it, lock it down so that no one else can .
Also note that we used AddOutputFilterByType to make sure that all text files were compressed before being sent across the wire. This saves bandwidth.
Of this section, most of these options cannot be set in .htaccess. Options such as the addtype and addhandler and addencoding CAN be set in .htaccess; the rest are global/sever level only.
Code:
Ubuntu :: Slow Network Speed When Writing To Server?
Jan 13, 2010I have just formated and did a fresh install to start all over. I installed Ubuntu 9.1 and everything went fine but the network. The computer serve as a NAS and MediaPlayer. When getting a file from the server, I get a speed of 40-60mb/sec, which are good for a Gigabit network. When I try to put a file in, the speed can't pass more than 1mb/sec and often stop.
Here's the network info:
Code:
vric@XBMC:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:8c:a1:eb:55
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fea1:eb55/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
Edit: Looks like it's a Gigabit Problem. I connected the Ubuntu box to my Linksys router which is 10/100 and everything is MUCH faster.
Ubuntu Installation :: Using Multiple HD's To Increase Server Speed?
Jan 21, 2010I am curious if it is possible to use multiple hard drives to increase server speed. I know I could run stripped drives or RAID0, but was wondering if there is any other way to do it within Linux. My default 9.10 Server install has 3 partitions as a default. Would splitting these on three drives make it any faster?
View 3 Replies View Related