Are there any linux applications that will allow me to adjust the hard drive RPM rotational speeds? I've used similiar programs for windows before but now I am running a linux setup.
View 9 RepliesI cannot get any fan information from 'lm-sensors' or 'sensors', I tried to run 'pwmconfig' and got this:
Code:
Code:
But I have no tools to control the fan speed from 'acpi'. in particular '/proc/acpi/fan' is an empty directory.
There are no fan info/controls in BIOS either.
I believe the fans do not work as fast as they should and I am trying to find a way to fix this before the cpu cores are melted down from overheating.
Laptop information: HP Pavilion dv2500t
Code:
I'm using fedora 12 alpha live-usb. and because of space limitation, I don't want to install some applications that I need(say gcc, gdb,..? ) Is it possible to run application from my hard drive which I have installed fedora 11?
View 9 Replies View RelatedI have an ATI Radeon HD 4850 running on Arch Linux with the xf86-video-ati driver.
Is there any way to control the fan speed (from a conf. file, the command line, whatever) or should I change to the Catalyst driver?
how to control the speed of the fan in my laptop ? i use ubuntu ...i don't seem to use it to full power and it is always cool .. it makes lots of noise.i don't know what to say for commands i've run . i tried lm-sensors but it says command not found. sensors gives me some output and "temp1" which say +69degrees maximum 89 ..i used the search function but it just gave me some unsolved threads.
View 2 Replies View RelatedPartition info:
sda2: Win7
sdb1: /boot
sdb2: LVM, containing , home, swap...
[code]....
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
I am using a script to start an application (with GUI, i.e. windows) in KDE. However, the window will always appear on the currently used desktop. I would like to define which desktop the application will appear to be able to just run in invisible in the background. How can I do this for KDE?
View 1 Replies View RelatedI'm looking for an application which does what is commonly termed as Revision Control (RC). Here is the scenario: I have a directory holding numerous files and subdirectories, all belong to a project I work on. I routinely edit/update some files and wish to record `snapshots' of the entire directory so I can compare different revisions. Of course I can store a tarred version of the directory everytime I change something but this is immensely inefficient. So What I would like is to `upload' a snapshot into an archive file everytime I change something and then being able to `download' a snapshot later (for comparison/backup). Only I work on the project and I use a single machine so everything is local (no network connections).
My requirements are:
1. Being able to easily download/upload with one command an entire directory with all its files and subdirectories.
2. Any change to the directory induces a new version including renaming/moving files (even if their content hasn't changed)
3. The snapshot is aware of symlinks and saves them as such (and not as file they point to).
4. The files in a snapshot retain their original date when I `download' from the archive.
5. A GUI allows to easily navigate between stored snapshots and see which changes occurred.
How do I check my hard disk Revolutions Per Minute (RPM) speed from a Linux shell prompt without opening my server case?
I referenced some other articles. they give only model number, serial number and disk space, but I need Hard disk RPM speed using shell script. any other Java program
Booted Fedora11 to a 1gb USB hd and when i try to open install to hd application it won't open. Is there another way to install to hard drive?
View 1 Replies View RelatedHow do I go about changing the fan speed? My laptop is running hotter than normal and although its not melting the case I'd rather turn the fan up to increase cooling if possible. Noise is not a concern as I normally have music playing anyway.
View 8 Replies View RelatedI have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies View RelatedHow can i control Cpu fan speed in fedora. I am found a similar forum in Archinux, just tell me as to how to do it in fedora. [URL]
View 1 Replies View RelatedI have a Intel Core 2 Duo 1.86Ghz CPU and I have attached a Zalman heatsink & fan to it for extra cooling. However, the default fan speed is very high and it is too loud and definitely unnecessary. So I use this program in Windows called EasyTune5 (which is for gigabyte motherboards, the brand my motherboard is) and I can set the default speed to zero or 1. There are values between 0 and 100, 100 being full speed of the fan. Setting it to a low value like 0 or 1 makes it very quite. Of course the speed of the fan goes up when the CPU heats up or is being utilized more BUT most of the times during idle, its back to being really quite.
Does ubuntu have any software that can do this? I know there are software to check the cpu temp but i need one to actually control the default fan speed.
Is there any way we can control the speed of pvmove??
View 1 Replies View RelatedI got a new computer and got it running Slackware64-current. It's motherboard is an ASUS M4A88TD-M and it's processor is an AMD Phenom II x4 965. I decided to get some chassis fans to improve it's thermal performance. But, since I started the computer after installing the new fan (only one of the 3 I got) the fan's speed is at max and it's very noisy. I'd like Slackware to control it's speed according to temperatures from lm-sensors. Output of # sensors-detect can be found here. Kernel is stock -current 2.6.33.4. Output of # lspci is here.
Code:
gtl@coruscant:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.31 V (min = +0.85 V, max = +1.60 V)
+3.3 Voltage: +3.34 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.08 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 2170 RPM (min = 600 RPM)
CHASSIS FAN Speed:3409 RPM (min = 600 RPM)
CPU Temperature: +40.0C (high = +60.0C, crit = +95.0C)
MB Temperature: +32.0C (high = +45.0C, crit = +75.0C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +0.0C (high = +70.0C, crit = +99.5C)
System: Linux flashvoyager 2.6.32-23-generic #37-Ubuntu SMP Fri Jun 11 07:54:58 UTC 2010 i686 GNU/Linux Ubuntu 10.04 Installed onto 64gig Flash Voyager GTR plugged into Tosh satpro laptop dual core 4 gig memory. This is not a casper r/w persistent install version. This is installed directly onto the flash pen and running as if the flash drive was a solid state disc.
I have obtained a 64gig which can read at 34mb/s and write at 28mb/s. The reason I wanted this was so I could install linux ubuntu and run the OS straight of the flash as if it was a Solid state disc. I have tried using the pendrivelinux method where the persistent data is stored inside a virtual file system but I found it did not allow grub or kernel updates without the need to rebuild the entire datapen plus I did not know how to get rid of the live boot menu where it asks for language and the like.
I boot the pen straight into linux ubuntu 10.04 via the bios boot menu and select the usb pen drive. Once into grub I select the most recent kernel and then load up ubuntu. When I first started using the distro from the pen the speed of the web browsing was so slow. I have since configured the browser to store the cache inside tmpfs /media/ramdisk and browsing seems fine now however there is underlying speed issue with using the method of install. Uncompressing installs takes an age. I have configured fstab like so:
#System
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sdb1 / ext4 errors=remount-ro 0 1
[code]....
PS: I am not allowed to use the HDD on the laptop since it is company laptop. My previous company laptop had Kubuntu 8.04 with XP as VM. Also having the install on the flash drive would give me the convenience of booting the pen from any hardware.
Is it possible to control the speed of the CPU fan in my desktop computer? The CPU runs cool at 30C yet the fan sits around 2700rpm and the BIOS doesn't allow for speed control.
View 4 Replies View RelatedI have problem with funs speed in my fujitsu rx100 s6 server, rpm funs is 3000 ? I think it is not standard speed funs. On windows 2008 server funs works quietly. Fujitsu supports only windows servers, red-hat enterp. and suse enterp. Is there any software to control speed fans?
View 6 Replies View RelatedI installed Karmic 64-bit on a new Phenom X4 Quad-Core PC. I've replaced the stock CPU cooler with a Cooler Master Hyper TX3, enabled all fan control settings in the BIOS, switched their profiles on silent, enabled the Cool n' Quiet option as well but my CPU fan is still noisy and seem to be running up to the max number of RPM, thus ignoring BIOS specifications. Besides this I can tell there is something wrong with it since even the CPU is on idle or with just the regular browsing, media player operations, PC sometimes freezes or is automatically rebooted .
I installed lm-sensors and went through all the sensors-detect operations (output attached to this post) but it doesn't show anything else but the CPU and HDD temperature which is always 40 Celsius degrees.
Just installed the latest ubuntu on my PC. When I was running windows I had a tool called asus smartdoctor which allowed me to vary my video card fan speed. I really need to increase this fan speed as my video card overheats. Is there a unbuntu compatable program that would allow me to change the fan speed or do I need to install Wine and run smart doctor that way?
View 4 Replies View RelatedI'm trying to control the fan speed on my laptop (IBM Thinkpad T43.) I used lsmod and saw that the thinkpad_acpi module was already load, but I know I need the fan_control=1 option so I did this:
$modprobe thinkpad_acpi fan_control=1.
Then I did: $echo level 7 > /proc/acpi/ibm/fan
and I get an error: write error: Invalid argument
I'm not sure what I'm doing wrong here, Also, if I wanted to load the module thinkpad_acpi at boot time with the fan_control=1 option, should I add it to /etc/rc.modules? In other words, does the rc.modules file override udev? And do I need to remove the module before reloading it with the fan_control=1 option?
I really need some control over my fan speed, as it seems by laptop is running rather hot.
Is there a possibility to use a flash drive as a speed up for conventional hard disks? I got the idea to redirect all read ops to the flash drive if the data is already stored there, and to read from the conventional disks if the data is not found there (and during idle time the freshly accessed data from the conventional disk is stored on the flash disk).
Is this already possible with linux standard tools?
I've installed f11 on my machine and am wondering how to control the fan speed for my graphics card, its a asus EAH4850 (single slot, fan starts automatically at around 10% speed).
The card goes at around 85 degrees Celsius with stardard speed with no 3d, and 110+ when running any 3d application, wich then causes it to not respond. i have to set it to around 60% speed for safe temperature.
I'm used to windows, there i could either use the asus smart doctor or the catalyst control center to adjust fan speed, i'm looking for a linux alternative.
I have a Radeon 3870 (rv670) that seems to work great with fc13 out of the box, with one exception. The stock fan is constantly running full speed. It's too loud. Proprietary drivers don't support fc13 yet. Has anyone found a way to make this work?Edit: The best I could do was switch to ubuntu, install fglrx and then issue the following cli commandCode:aticonfig --pplib-cmd "set fanspeed 0 15"
View 1 Replies View RelatedI'm running openSUSE 11.4 with GNOME. I have an EVGA nvidia GTX 285 installed, which is equipped with a variable speed fan. I'm running the nvidia driver package which includes the nvidia X Server Settings utility. The utility allows me to view the fan speed as a percentage of its maximum speed but does not allow adjustment. It appears that the speed remains at the card default of 40% regardless of GPU or card temp. When running certain graphic-intensive applications my card runs quite hot (sometimes >70 degrees C). Although this isn't hot enough to burn the card up in the short term, it is certainly hot enough to shorten my video card's lifespan.
So, the question is how do I set up my system so I can increase the fan speed to 50% or better yet, get it to increase as the GPU temp increases? The nvidia X Server Settings help indicates that fan speed is adjustable after enabling coolbits, but coolbits is not installed on my system and is not available from the default repositories. What is the easiest way to obtain, install and enable coolbits? I have no intention of overclocking my card. It was too expensive to risk damage to the card.
I often run my ubuntu as SSH server only so i stop GDM when i do that, but i found out that after i stop gnome, my ATI gpu fans spins up like crazy and sounds like a jet plane, (i have ati closed source driver installed) i am worried to leave the fan on like that, so i have to start a X session again. Then the fan slows down I would like to be able to have slow fan speed when i drop to text mode only, one is its light weight, two is for security
View 3 Replies View RelatedTrying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View Related