OpenSUSE Network :: Creating Own Static IP?
Mar 31, 2010HOW DO I SET MY OWN STATIC IP ON SUSE?
View 5 Replies
ADVERTISEMENT
OpenSUSE Network :: Enable Static DNS Address For Mobile Broadband In KDE Network Manager?
Mar 5, 2010How do I activate static DNS for mobile broadband. I can't find any place to write down this information. Settings are made in Network Manager - not Yast.
View 3 Replies View RelatedOpenSUSE Network :: Network Manager And Static IP Setup?
Jan 12, 2010I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me
View 9 Replies View RelatedOpenSUSE Network :: SUSE 11.3 No Network Access With Static IP
Aug 20, 2010New SUSE 11.3 install connects to network/internet etc OK with DHCP-assigned IP address. When I switch to static IP, I can no longer ping internal network, or anything else. This works OK with SUSE 11.2 on same hardware and (as far as I can see) same setup. Some diagnostics are shown below.
Firewall
Disabling the firewall makes no difference.
Not using a network manager (can't see how to assign fixed address if I do - all greyed out).
ifup eth0:
eth0 device: Intel Corporation 82540EM Gigabit Ethernet Controller (rev 02)
SuSEfirewall2: Warning: no default firewall zone defined, assuming 'ext'
(not sure why the warning - eth0 is assigned to external in the firewall setup).
[code]....
OpenSUSE Network :: Set Static Ip With Knetworkmanager?
Feb 21, 2010How do I figure out what to enter into the fields when I set a static ip in KDE? Other network managers give you suggestions but knetwk does not.
View 9 Replies View RelatedOpenSUSE Network :: Configure Static Ip Using The Terminal
Jan 24, 2010I was trying to configure a static Ip on openSUSE but didn't get very far...I would like to do it through the terminal.
View 4 Replies View RelatedOpenSUSE Network :: Register DNS Entry With Static IP?
Apr 5, 2011We're trying to replicate something that Windows servers can do. Basically on a Windows box, you can give it a static IP address, but there is an option to have it update the DNS server with it's IP and hostname. We are trying to do this on SUSE 11.I know I can get this function to work on SUSE if the box is set up as with DHCP. What we're having difficulty is when the server is set up as a Static IP to get it to update the DNS server
View 8 Replies View RelatedOpenSUSE Network :: Static IP For Bridged Connection ?
Aug 11, 2011I have virtual box installed which automatically installed bridges for my network adapters. This has always worked fine. I'm attempting to set up a static IP for this machine now. I use NetworkManager, and the physical connection (eth0) is set to static IP of 0.0.0.0, and the bridge (br0) attached to eth0 was set to DHCP. I changed br0 to my desired static IP and lost net connectivity (I'm talking about the host, not the virtual machine - I'll get the host working first). Re-enabling DHCP restores connectivity. So I don't know what the problem is, but I am unable to assign a static IP to the bridged connection. Do I have to do this differently? Do I need to remove the bridge so I am using just eth0 again, assign the static IP to eth0, and then re-install the bridge? I haven't tried that yet because a) I don't know how to remove & reinstall the bridge, because it was done automatically by Virtual Box installation, and b) I could probably do that if I had the time figure it out but right now I don't.
I set up a static IP on wlan0 on another machine using Network Manager and it works fine. That machine also has Virtual Box installed but for some reason doesn't have the bridged connections. (Perhaps because it runs Ubuntu, not OpenSUSE, if that makes any difference)
OpenSUSE Network :: Network Using Static IP
May 3, 2010Recently our sys administrator decided to go to static IPs from the earlier assigned dynamic ones. This has created some havoc in my open suse 11 and I do not have access to network. I tried using the YAST network configuration manager, after everything is done it shows 'network wired' but unable to ping.
View 1 Replies View RelatedOpenSUSE Network :: Setting Static Local IP Address?
Feb 18, 2010how I can define a local static IP address (so that I can run a web server off of the same IP, rather than letting my router DHCP it)?I've tried doing the YaST->Network Devices->Network Settings->Traditional Method with ifup->Set NIC to desired IP->Set Default Gateway to router address method, and afterwards I can't even get into my router anymore (not even responding to ping).
View 8 Replies View RelatedOpenSUSE Network :: DHCP Overriding Static Setting?
Apr 3, 2010I'm maintaining a very modest network at home, with OpenSUSE as OS on the server. I got the DHCP and routing working by following the instructions in the wiki. However, every time I run dhclient on the server/router, it appears my own DHCP server assigns an address to the internal network card despite the fact I specifically assigned it to be static using Yast. The situation resolves itself when I restart the network services with the command /etc/init.d/network restart. Otherwise no problem, but it also seems the internal network card gets a "new" IP from my server every time the external card requests one from the ISP. This is more of an issue.
View 5 Replies View RelatedOpenSUSE Network :: Configuring Mail / Web Server With A Static Ip?
Aug 29, 2010I think that i lost my memory, because i completely forgot how to accomplish this.
I have a WEB/MAIL server configured to work on a static IP address, lets say 200.11.22.33.
Now I wanna point a domain to that server to get the services up and running, lets say mydom.com ...
The static IP Address is assigned by my Internet Provider.
I'm lost in the part of connecting the domain with the server.
I have the domain DNS pointing to the ISP name servers, but I don't remember if this is the correct way, or if I have to setup my own DNS server.
OpenSUSE Network :: Tightvnc Not Working With Static Ip Address?
Oct 12, 2010I have a problem with tightvnc, when I set up a dinamic ip with networkmanager it works fine but if I set up a static address connection it display an error "You have been unexpectedly disconnected from 'hometsa-comp'. Would you like to reconnect?"
"Couldn't convert 'hometsa-comp' to host address" I have setup the ip address, netmask, gateway and dns server in the network manager static address, it works when I setup the vnc connection using ip address instead of hostnames.
Software :: Attaching Lib.so While Creating Static Lib?
Jul 15, 2011I want to attch libCoherence.so while creating my new static lib, bcse my lib functions use libCoherence.so.
My Makefile :
Code:
CC=/opt/studio12/SUNWspro/bin/CC
CFLAGS=-errtags=yes -g -c
all: libCoherence.a
[code]....
But if I remove "/export/home2/Coherence/coherence-cpp-32bit/lib/libcoherence.so" from Makefile, build went fine.
OpenSUSE Network :: Assign IPv4 And IPV6 Static Addresses?
Feb 19, 2010How do I assign IPv4 and IPv6 static addresses permanently in OpenSUSE 11.2? Currently I am only able to assign either IPv4 or IPv6 static address not both. I cannot find even the interfaces file(/etc/sysconfig/network/interfaces).
View 2 Replies View RelatedNetworking :: Creating A Static Routing Table ?
Nov 29, 2010I have to connect my private adres 10.0.0.2/26 to an external adres 192.168.1.253/16
I am not allowed to use Nat so i have to create a static routing table..
Ive put a router between with 2 nic's:
Ive seen on various sites that :
Should do the trick but it isnt working for me ... Ipforwarding is enabled.. Also when i use the sys/proc command..
How to make the table? I am using Opensuse 11.2
OpenSUSE Network :: Setup Fast Apache - Launch Static Html Pages
May 22, 2011I would like to set-up a pretty fast a running apache. I would like to use him so to launch a pretty small web site of 10 static html pages. At this time there is no security concerns (even though I want to do it right) , because the computer has not even ethernet cable. I have some experience, 8 years ago I Was setting up virtual hosts in fedora, so this process is not a blackbox for me.
View 9 Replies View RelatedOpenSUSE Network :: Creating PPTP VPN Connection In 11.3?
Dec 26, 2010Since I completely switched to Opensuse11.3 From MS-Windows OS. The Problem I had is a PPTP VPN connection in windows, Which I used to connect Via a connection, The VPN provider gave me. Since these connection are for MS-Windows , I can't create a connection manually in Opensuse. I used , KDE control module/Network connection/VPN/add -> PPTP then I entered the host ip in NT DOMAIN field , my username, and password, and left all other options (including Gateway) the way it was. After that, every time I try to connect to this connection, NOTHING happens.
View 2 Replies View RelatedUbuntu Servers :: Creating A Static Cdrom Automount Point?
Mar 14, 2011I have an Ubuntu server running Samba and I would like to share out the cdrom drive to the network. I made a share of the /media directory and it seems to work fine when I insert USB drives and I am able to browse and work with files. However, when I insert a cdrom it automatically mounts to /media/<volume name> and I get a permission denied error when I attempt to access it over the network. I am assuming this is happening because the permissions do not include the execute bit and being a read only file system I can not change this. I made the directory /media/cdrom and manually mounted the cdrom to it and I can successfully access it over the network just like the USB drives. So my question is: Is there a way to make the cdrom automatically mount and unmount to /media/cdrom when I insert and eject disks instead of to /media/<volume name>? Or maybe just have the permissions automatically set so Samba users can open it instead of just see it.
View 1 Replies View RelatedOpenSUSE Network :: Creating Aemotely Accessable GIT Repository
Mar 3, 2010Wondering if someone can lend some insight or point me in the right direction. I'm trying to use OpenSuSE 11.2 to host a master copy of a git repository. I'm guessing that I've still got a disconnect with xinet.d starting the git-daemon in response to a port 9418 request as I never see git show up as a process, even though I see in the message logs, the remote machine making the network request.
View 2 Replies View RelatedRed Hat :: Static Network Configuration On RHEL - Network Is Unreachable
Apr 27, 2010setup my static network connection Here are my details :
IP : 172.16.152.137
Subnet : 255.255.255.192
Gateway : 172.16.152.191
Primary DNS : 172.16.0.1
[code]....
but after this setup when i restart my network #service network restart while bringing up the eth0 the following message is displayed before [OK] - RTNETLINK answers : Invalid Argument now it seems either this setup is wrong or not sufficient to set up the connection, whenever i try to ping 172.16.0.1 it showing connect : Network is Unreachable
Networking :: Creating Simultaneous Network Connections To A VPN And Local Area Network?
May 31, 2010I'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
Networking :: Use The Network Manager App To Set A Static IP?
Jan 12, 2009In 8.04 I can use the network manager app to set a static IP.
In 8.1 the network manager doesn't seem to work. I tried many different permutations of settings and got nowhere. Even though I put in IP subnet and gateway it still does the DHCP config.
So I added lines to my /etc/networking/interfaces file like this:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
gateway 192.168.0.1
I then either reboot or do this: sudo /etc/init.d/networking restart
This made the network manager icon in the top panel vanish. An ifconfig showed that those settings are in place but DNS doesn't seem to be working. I can ping other hosts on my network by IP but not www.yahoo.com etc.
I even read the man, that's how desperate I got! (a config like the above seems to work on my 8.04 machine except that the auto eth0 appears at the end of the file.)
I didn't see how to set the DNS server(s), unless I was in the wrong man.
Networking :: Securing Network With Static Arp?
Aug 27, 2010I am trying to secure my LAN a little by doing static arp entries. But I am not sure how to go about doing this... I have a gateway, and I have a seperate box that runs dhcpd. I would like to assign every machine an ip and only allow it to use that ip, therefore static dhcp entries, and static arp entries on the gateway.
1. But how do I prevent someone from picking an ip that nobody is using and assigning it manually?
2. I assigned a static arp entry by doing arp -i br0 -s 2.2.2.35 00:1F:E1:CC:2E:46, how do I remove it now? I used arp -d but now it just says:
? (2.2.2.84) at <incomplete> on br0
3. I would also like each machine to have a hostname/dns.. like machinex.local, where I can do forward and reverse dns lookups, how do I config this?
4. I know static arp can be fooled if someone just clones an allow mac.. is there anything else that I could use that is more secure for wired lan?
5. I have my gateway running rflow sending all data to ntop running on my dhcp box.. Ntop is kinda cryptic, is there anything easier to use? or something that is better in features? I would like to see how much bandwidth each local ip is using and possibly what protocols, like ntop already shows.
Networking :: Static Network Setup?
Aug 16, 2010I have a fresh install of Centos 5.x and I'm having issues on setting up the network...i know i have to edit/etc/sysconfig/network-script/ifcfg-eth0 and create an ifcfg-eth0:0 right?im just having issues getting everything setup correctly.my network setup:Router IP: 192.168.2.1IPs on network: 192.168.2.xNetmask: 255.255.255.0
View 3 Replies View RelatedDebian Configuration :: Static IP And Network Mounts
Jul 19, 2010I moved to static Ip method for my laptop. I edited the interfaces file and it seems to work since I am writing this message from that laptop, but I have a new problem with my Debian. The mounts are not mounted during the startup anymore. Before I was using the network manager method and the nerwork mounts were all fine. Now with this method, they are not mounted and I need to mount them by firing "sudo mount -a" manually.
View 2 Replies View RelatedUbuntu :: 10.04 Static IP Addresses Using Network Manager?
May 2, 2010I have four PC's in a home network setup, no server just peer to peer using ssh. I have tended to use wicd to set static IP addresses because Network Manager didn't always perform as I thought it should. Now that I have installed 10.04 I cannot see how to set static addresses using Network Manager so I installed wicd, and disabled Network Manager. After setting the address with wicd it shows that the computer is connected to the internet however I cannot get internet access, though I can network with my other computers. I've uninstalled and reinstalled a few times just to check that I haven't been careless but the results are still the same.
View 8 Replies View RelatedUbuntu Networking :: Configure Static IP - Use Of 'network'?
Apr 15, 2011I'm setting up a home webserver with Ubuntu 10.10 and want to configure the interface to static. I'm using a router, which is setup and working correctly. I have been using linux workstation with dhcp for some time.
I've edited my interfaces file to reflect the parameters for setting static ip, with the exception of 'network'. No matter what I put into this setting, it causes me to loose connectivity to the outside world. I've tried to put my router IP, and my IP set by my provider. What should the 'network' value be?
At this time, my 'interfaces' files only includes the following and has connectivity out to the internet:
Code:
Do I need the 'network' settings as shown in every tutorial (but never explained)?
Networking :: Connect To Network With Static IP Address?
May 19, 2009I am running 2.6.27.21:170.256.fc10.i686 on my laptop.
I am trying to connect to a network at a university in China right now and I cannot figure out how to connect.
IP: 192.168.213.179
subnet mask: 255.255.255.0
default gateway: 192.168.213.1
DNS: 202.202.96.33
DNS: 61.128.128.74
CentOS 5 Networking :: Static Ip - No Network Connectivity
Oct 27, 2009I'm having strange difficulties in setting a static ip for my CentOS 5.4 installation. If I use DHCP everything is fine, but with a static ip I have no network connectivity. I have done this many times with RedHat/Fedora/Ubuntu etc. with no problems and now I have no idea what I'm missing or doing wrong. I have tried to set ip as 192.168.1.20 (anything below .100 will do). GW is 192.168.1.1 and NM is 255.255.255.0. This is all I have had to use with other distros, but now when I set these I cannot even access my routers admin page or ping it (192.168.1.1). (I just did this with Vista on my other machine and all worked fine).
View 13 Replies View Related