OpenSUSE :: After 11.3 Upgrade - Matlab Compiler Fails Because Of Gcc?
Jul 28, 2010
I just upgraded from 11.2 to 11.3 and are facing now this mex compiling problem. The error output is:
Code:
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /usr/local/matlab/R2009a/sys/os/glnx86/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl_c.so.2)
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /usr/local/matlab/R2009a/sys/os/glnx86/libstdc++.so.6: version `GLIBCXX_3.4.11' not found (required by /usr/lib/libppl_c.so.2)
/usr/lib/gcc/i586-suse-linux/4.5/cc1: /usr/local/matlab/R2009a/sys/os/glnx86/libstdc++.so.6: version `GLIBCXX_3.4.14' not found (required by /usr/lib/libppl.so.7)
I have been trying to install MATLAB 2008b as a standalone version; however, every time when the process runs to 18% it shows an error as follows: "There was an error extracting the archives for MATLAB compiler. Chceck that you have enough disk space and rerun the installer."
I did have checked the disk space which is much more than enough. I have also changed few different disks that are way more than enough as well, about 5GB at least, but this error still popped out when it runs to 18%.
launching vBox lately pops-up this; but if I allow it to go ahead, I get this.. : the window has no end (!), no scroll bars nor any further info. If I first uninstall in Yast, will I lose all of my machines? Up until now these periodic updates have been a breeze, only sometimes needing a vbox setup afterwards to tweak the kernel
Cannot find input plugin for MRL [dvd:/] Is now the message that I get when attempting to play DVDs in Kaffeine, which worked very well in SuSe 10,3 three hours ago. Ironically, VLC now works a treat, when upgrading that in 10.3 killed it.Xine doesn't want to work (restricted format), and Kaffeine isn't playing any files either. Has something been dropped from my previous setup, or do I have an inadequate installation? I'm not very command line oriented I'm afraid;I just expect things to work as they did before...:-)
I was running openSUSE 11.2 on a Dell Studio with a mirrored disk. The upgrade to 11.3 went well it seemed until it got to the point of installing the new bootloader. Then it couldn't mount /boot. Otherwise it seemed to go OK though.It completed and rebooted. I see a very brief flash of the word GRUB on the reboot, but then the screen blanks and I get the BIOS messages again.How can I now install GRUB so that I can boot. I had a similar issue with 11.2 in the past, and was able to repair GRUB using 11.2's DVD's "Repair Installation" which had tools to reinstall GRUB.11.3's DVD is missing this option.I'd prefer not to do a fresh install as then I will have a lot of OS setup to repeat (Samba, Apache, Trac, etc.....)
yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn't react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb.
output from cups: Description:OpenBlackBox v mojom rume Location:Moj rum Driver:Samsung ML-1640 Series (grayscale, 2-sided printing) Connection:usb://Samsung/ML-1640%20Series Defaults:job-sheets=none, none media=iso_a4_210x297mm sides=one-sided
So for those of you who has built GCC from source would know that you can't install GCC without an existing GCC. So my question is, what would happen if all computers in the world suddenly just died, and all you had was the computer in front of you, and a copy of GCC 4.5. How would you install that?
I ask because I would like to install GCC 4.5 on my old powerbook G4 mac without installing a binary GCC provided by Tiger 10.4 disks. I would like to build GCC from source, without an existing GCC to complicate updating.
I am trying to upgrade RH9 to F10. I have downloaded dvd iso image i386. The SHA1 integrity check passes. The installer fails media check due to "errors". I did an independent verification of the DVD and zero errors found. Download was from Fedora's own torrent, so files should be verified anyway. If I bypass the media check I get the message : Running anaconda 11.4.1.62 the Fedora system installer - please wait.....
I'm an absolutely beginner at linux and openSuse. I dont even know how to install apps. I learned to install from repositories but I dont know how to install a script file.. I dont even know anything about terminal. So what I want is for now is apps that required to write C/C++ codes and compile them. Im at univ and I need to install these but I dont know which apps I should get or how to install them. I was using MS Visual Studio on windows.
I'm using gcc c/c++ compiler with net beans IDE and after I compile this message shows in the terminal [URL] Uploaded with ImageShack.us since I'm new to linux I can understand this as much as I can understand russian this error doesn't always occur sometimes it runs correctly
I'm trying to configure Apache, however I have some problems.. linux-top:~/appli/httpd-2.2.14 # ./configure --prefix=/root/appli/ checking for chosen layout... Apache checking for working mkdir -p... yes checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu Configuring Apache Portable Runtime library ...
checking for APR... reconfig configuring package in srclib/apr now checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu Configuring APR library Platform: i686-pc-linux-gnu checking for working mkdir -p... yes APR Version: 1.3.9 checking for chosen layout... apr checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: in `/root/appli/httpd-2.2.14/srclib/apr': configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. configure failed for srclib/apr
i'm a new on linux system and i have a problem with SUSE 9.1. I google for yast repositories to install "gcc" but i only see for release 10+. So i think 9.1 version it old version. The thing is that i can't upgrade the SO because it's a "sever" for some applications, and my problem is that i need to install Nagios, but when i type the ./configure command its says:
checking for a BSD-compatible install... /usr/bin/install -c checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: no acceptable C compiler found in $PATH See `config.log' for more details.
So I decided to install packages with yast, but i can't find any active repository. I very new on this, and i don't know if i'm doing right the things. Also i don't have too much practice on english.
This is the info of the SO * uname -a: Linux noc 2.6.5-7.111-default #1 Wed Oct 13 15:45:13 UTC 2004 i686 i686 i386 GNU/Linux
* cat /etc/SuSE-release SuSE Linux 9.1 (i586) VERSION = 9.1
I am looking to install a c++ compiler. I run 11.4, and was told to look in the Software Manager for easy installation. I have no repositories installed, as the repositories in the Application sticky only applied to Suse installations through 11.3. I found the package "gcc45-c++" (Version Number 4.5.1_20...208-9.8) when I searched the Software Manager. I proceeded to install it, and had no problems, but when I looked in "applications", the compiler was not there. I'm aware that I may be revealing some great ignorance here, so I'll ask, should gcc appear? If not, how do I execute the program?
I have a G3 Mac using the 6.06 PPC version of Ubuntu. The Update Manager stated there is the update to PPC 8.04 LTS so I went ahead and updated it. After 6 hours of downloading and updating, now it only boots to a blank/black screen as if it is trying to use a non-native resolution. One time I did hear the login (drum) sound but still nothing on the screen. Any way I can boot into a cli to troubleshoot this? During the entire booting process I only see black screens, a few text screens (yaboot, then another with Loading Please wait), one has the typing cursor at the top left for about 1 minute. I can hear the hard drive running and searching as if all is working and loading, just nothing on the screen.
I tried the same thing a few months ago and the only way to get it working was to put in the 6.06 alt PPC CD and format/reinstall.
In trying to upgrade from 10.04 to 10.10, the installation fails when checking software channels. The error basically says that there are breaks, broken depends and unmet dependencies. Yet Package Manager shows that there are no broken packages and mostly everything is running OK except for the Suspend option which doesn't work in 10.04 on a good number of various laptops. I am using an IBM Thinkpad R51 laptop with 1.5 GHz and 512 MB RAM. I have never had a problem like this with any Ubuntu upgrade in the past. How can I get past this problem and upgrade to 10.10? Log files available upon request. If log files needed, Someone on Launchpad said it's because I have third party software installed. But, this never happened before with previous Ubuntu upgrades.
I tried to upgrade Mythbuntu from 10.10 to 11.04 but it fails to download three packages, stopping the upgrade from finishing. The APT source is au.archive.ubuntu.com
I have a CentOS 5 64bit cloud server at 1and1. The current version of PHP on it is 5.2.17. I would like to install 5.3.6, which is available from the Atomic repository. I'm using yum for all this but when I try to install the 5.6.3 package, I get the following.
Total download size: 10 M Is this ok [y/N]: y Downloading Packages: Running rpm_check_debug ERROR with rpm_check_debug vs depsolve: Package php-ldap needs php-common = 5.2.17-1.el5.art, this is not available. Complete! [root@s15 ~]# php -v PHP Warning: Module 'ldap' already loaded in Unknown on line 0 PHP 5.2.17 (cli) (built: Jan 7 2011 10:39:29) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2010 Zend Technologies [root@s15 ~]#
Using x11vnc server on Debian host, and TightVNC viewer client on Windows 7. All was working fine until a server host upgrade, from Wheezy to Jessie. Now, when I try to connect, TightVNC retrieves the certificate as normal, compares and accepts it, and starts stunnel. The next step would normally be to prompt for the VNC password.
Instead it gives an error:
ReadExact: Socket error while reading.
I'm guessing that some thing is missing or misconfigured after the Jessie upgrade, which broke many other things too, as Debian upgrades always seem to do. I have removed and reinstalled the x11vnc package, no effect.
The errors in the log file don't mean a lot to me.
I am trying to upgrade from F11 to F12.Using Preupgrade, everything went well and then it asked me to Reboot. Anaconda started then says something about updating some files then the screen goes blank.
-> retrieve install image, ok -> examine storage (or similar), ok -> transfer install image to disk, ok -> dependency check in install packages, ok -> start installation process, ok -> preparing to install
=> there was an error running yout transaction for the following reason(s): insufficient diskspace
you need more space on the following filesystems: 1089 M on unfortunately not more information displayed. only exit possible. Any experiences with this kind of behaviour? Many thanks for any feedback.
Installed v9 a couple of weeks back and have been causally mucking about with it since. I managed to get XP and ubuntu running as a dual boot system (which was an achievement ).
Anyway, i've upgraded to 10.04 - and already loving it. However... my XP o/s no longer boots. It use to prior to the upgrade. Now, when the XP o/s is selected from GRUB2, I just get a series of bleeps and a flashing _.
Now, I am a complete novice. I actually have no idea where to even begin trouble shooting GRUB2 (and i'm assuming its a problem with GRUB).
It seemed to upgrade the first round and looks like it booted back into Ubuntu (I had Purple background) and asked for updates and I installed them and on reboot I lose video when entering desktop. I see the initial purple Ubuntu loading screen, but when it goes away I lose video completely and my monitor says it's unplugged.
I tried the grub nomodeset without luck. I am at the desktop in safe mode. If someone can tell me how to edit a file to enable the graphics again, I'd be forever grateful. Sorry if this was answered, but search only gave me help with the Intel 850 graphics problems and not what I was seeking.
Dual boot Windows XP SP3 & Ubuntu 9.10 on a single hdd, w/2 partitions. Booted to Ubuntu and upgraded online. XP boots fine, but Ubuntu, not so much; a msg about /dev not found, followed by a shell login prompt. I suspect a grub problem, but haven't been able to find a definitive answer. Since I can at least boot XP, I do not want to do anything that would screw that up and leave me with no bootable OS. I did the "upgrade" shortly after 10.04 was released. Is there a way to reliably fix this w/o possibly screwing up my ability to boot XP, the only OS I can boot? I have no Ubuntu 10.04 disk, as I used their upgrade online option.
Now this no longer works with whatever grub 10.04 uses, I suspect it is grub2? How do I restore grub to the specific partition I need and NOT to MBR? I have a different boot loader and this boot loader is directed to Ubuntu's boot partition.... Since I cannot boot directly to Ubuntu's boot partition I am perhaps left with only LiveCD to do the recovery, right?
I upgraded from 9.x to 10.10. Under 9.x my wireless usb dongle worked correctly. After upgrade it does not. I checked the dongle on another machine and it works correctly. I inserted a usb memory stick and the system found it as a drive correctly. I assume from this that both the dongle and usb port are ok. The wireless device is a D-Link G122 A2 which is on the supported list (it ran out of the box on 9.x). The link light did not even come on. So I installed ndiswrapper and the windows D-Link driver (note that this was not needed in 9.x). Now the link light comes on and the wireless router is found but the unit will still not connect.
The log file entries on dongle insertion are as follows:
It appears that the problem is with wlan0 not being ready. If this is the case how do I make it ready?
