Fedora Networking :: Not Seeing Tkip Or Aes Encryption Options In Network Manager?

Sep 24, 2010

I am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail

View 1 Replies


ADVERTISEMENT

Networking :: Unable To See Tkip Or Aes On Network Manager On Fedora 13?

Sep 23, 2010

I am running Fedora 13 and using Ndiswrapper with my pci wireless card. my router is a netgear wgr614v9 wireless router with wpa2-psk. When I try to connect to my network the only options I see for security are dynamic WEP (802.1x) and WPA &WPA2 Enterprise and for authentication all I see is TLS LEAP Tunneled TLS and Protected EAP (PEAP). I can connect to my network when I drop security on the network but other wise I am stuck. I have been trying to fix it for about a week now by myself to no avail

View 6 Replies View Related

Ubuntu Networking :: Change Encryption Mode From Auto To AES Or TKIP On Router?

Jun 14, 2010

I use to have problems getting my wireless card to connect to any network on ubuntu. I discovered that I needed to change my encryption mode from Auto to AES or TKIP on my router. After I did this I was able to connect to my network with full wireless n support. I am using a d-link DIR-615 wireless n router.So far I know this works perfectly on 9.04-10.10 alpha.

View 1 Replies View Related

Ubuntu Networking :: Getting Bad Password Error From Wicd Network Manager On Encryption

Jan 1, 2011

Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.

View 1 Replies View Related

Ubuntu Networking :: Pass Custom Options To Network-manager-pptp?

Jul 27, 2010

I have ~20 log entries/second in syslog

Code:
nm-pptp-service-1078 log[decaps_gre:pptp_gre.c:414]: buffering packet 57467 (expecting 57429, lost or reordered)

[code]....

View 1 Replies View Related

Ubuntu Networking :: WPA/TKIP Working But Not WPA2/AES?

Oct 13, 2010

First, I've dinked around with Linux b4 but never really considered it for an everyday desktop machine. After installing the ubuntu 10 release I have to say I am really impressed. This is going to be the kids homework machine!I had one challenge during the installation and that was getting wireless networking going. I set up Win XP first (to get the ndis driver and validate connectivity).After installing ubuntu I could not get the adapter (Netgear N300/USB) to connect to our router (D-Link DIR-825) using WPA2 and AES. Finally I got it to work after setting the router to only TKIP encryption. This works ok but causes the adapter to operate at a lower connection speed

View 3 Replies View Related

CentOS 5 Networking :: Connecting To A Wireless Network Using Encryption?

Apr 5, 2009

I recently downloaded and installed CentOS 5.3 DVD media.The media check passed. I proceed to install the operating system sucessfully. After installation, all my hardware is recognized, when compared to CentOS 5.2. Anyway, when I attempt to connect to my wireless network that uses either WEP/WPA/WPA2-- I get an error message that I cannot recall (it basically only came up when I entered the key) However, I can connect to my wireless network when it is unencrypted and no open/shared key is needed.I would like to be able to connect to my wireless network when

FYI: I am using a RealTek RTL8185 Wireless Driver.Also, I use CentOS as a workstation.

View 4 Replies View Related

Fedora Networking :: Network Manager Has Disappeared

Mar 11, 2009

I updated my FC10 just a day back. The problem is that Netwrok Manager has disappeared. And in spite of re-installing it, it doesn't appear on the panel when i enter 'NetworkManager' as root in the terminal.I have a USB modem right now. Update was made through a broadband connection. Ethernet works perfectly well but this USB modem of mine doesn't work at all. And I have to use USB not Ethernet.

View 9 Replies View Related

Fedora Networking :: Network Manager DHCP

Jul 7, 2009

I have got DHCP issues with Network Manager. Whenever I try to connect using static IP it works, but when I use use Netowork Manager with DHCP, it seems to try to connect and soon says "Network Disconnected"..I've managed to connect to wlan and eth using network, so there shouldn't be any hardware/driver issue.

View 4 Replies View Related

Fedora Networking :: 3G Dongle Doesn't Appear In Network Manager?

Jan 20, 2009

I have run Fedora 9 and 10 on my Dell Inspiron 640m for about 6 months now and generally experience very few issues with it. Specifically I've been running Fedora 10 KDE 64bit since it was launched. Up until I had to reload it a couple of weeks ago my Vodafone Huawei E172 3G dongle worked perfectly with Network Manager. Since the reload the dongle is detected by the OS (lsusb lists it correctly, etc) but nothing I do will make it appear in Network Manager.

I've tried manually configuring a GSM connection then plugging it in, but no joy. I've also tried using it in my Acer Aspire One which runs Fedora 10 XFCE and it work, but when I try it in another Dell Laptop running Fedora 10 KDE 64 bit it doesn't. I'm assuming that a recent update must have caused some issue as it has definitely worked in both Dell laptops in the past. As mentioned I've reloaded recently but the other laptop hasn't been.

I'm unsure where to go from here. I haven't been able to get Vodafone's beta drivers working under F10 (although I did under F9) and can't find any posts on this issue. The version of Network Manager that I'm running is NetworkManager-0.7.0-1.git20090102.fc10.src.rpm, which was released shortly before I reloaded. Chances are I just didn't try my dongle between the update coming out and the reload, so didn't notice the problem before hand.

View 14 Replies View Related

Fedora Networking :: Network Manager Settings All Grayed Out ?

Mar 10, 2009

I'm running Fedora 10. My Network Manager settings are all grayed out. They are uneditable. I can see the detected settings, but not change them. All of the settings fields are disabled.

Is there a way to enable these, so that they can be edited?

Starting with the menu in the upper left corner of the GNOME screen: System/Preferences/Internet And Network/Network Connections

The Network Manager window appears correctly.

I see all automatically generated settings that were created for my various devices:

In particular, I want to be able to edit "Auto vmnet8", for VMware usage.

I know about the workaround of going back to the manual network configuration as used in older versions of Fedora, such as editing the files in /etc/sysconfig/network-scripts/ifcfg-* and then enabling the old "network" service and disabling the "NetworkManager" service.

However, this workaround really won't work in this situation. The VMware interfaces, vmnet1 and vmnet8, are virtual interfaces that *only* exist when the VMware services are running. The VMware services are started *after* the old manual network configuration would be applied. So, at the time the scripts in /etc/sysconfig/network-scripts are processed, the vmnet1 and vmnet8 devices do not yet exist! I'm hesitant to change the numbering of services, lest other things break (VMware on Fedora 10 is rather fragile already).

I love the feature of NetworkManager to be able to automatically apply settings to newly materialized network devices (such as vmnet1 and vmnet8 when VMware is loaded). However, I need to also be able to edit those settings.

Is there a solution that will make my Network Manager "Edit" window not be entirely grayed out? I can see the settings pages just fine, but unfortunately, they are all disabled and I can't edit them at all.

View 11 Replies View Related

Fedora Networking :: Network Manager Connects With 'auto Eth 0'

Jun 23, 2009

I got a little problem with network manager. I got two connections in it, with two different DNS-Servers, because the one of my provider is very slow I surf with opendns, but sometimes that slows down too, so I want to change if necessary. Both connections got the same fixed IP.That worked all fine, until I got my new router (it's a Netgear WGU 624). It's connected by cable and I configured it like the old one. But for some reason instead of connecting to the manually configured connections, my fedora 10 creates a new one "auto eth 0" with a dynamic IP. So every time I boot or switch on from standby my PC connects with this one and I have to manually set it to the right connection. There's no chance to edit or delete it cause those two buttons are grey and won't work. I also tried restarting network manager manually and I also tried starting it with su as root.

View 14 Replies View Related

Fedora Networking :: Restore Network Manager Applet?

Jul 20, 2009

I lost my network manager applet after removing kde-desktop. restore it, as I dont find it in add to panel applications I dont have any clue, also how could I add bluetooth applet in notification area.

View 5 Replies View Related

Fedora Networking :: Network-Manager PPTP Add Routes

Jan 13, 2010

I currently managed it to get a pptp-connect to my home network. now I have another little problem. NetworkManager always routes the whole network traffic over my home network if i am connected to the home network.If i set the "Use this connection only for resources on its network" I have do manually say:

Code:
route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0
After that only the correct traffic runs over the vpn. Now my question is it possible to setup the route via the networkmanager gui?

View 3 Replies View Related

Fedora Networking :: Completely Remove Network Manager?

Mar 27, 2010

After an update in mid-February I can no longer get Network Managero run anyinterface. I tried downgrading ppp, but that did not help. I have tried to delete all devices, but there is no user interface from which I can do that. Network Manager does not appear in any system tray. I even did a complete remove and reinstall, to no avail.This is true on both 32 and 64 bit Fedora 12, and on laptops, desktops and VBox VMs.Here is what I see in messages.log:

Code:
Mar 27 12:09:46 vmf11x64 NetworkManager: <info> Activation (eth0) Stage 4 of 5 (IP6 Configure Timeout) scheduled...

[code]...

View 14 Replies View Related

Fedora Networking :: Connection Sharing With Network Manager

Dec 21, 2010

I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?

View 6 Replies View Related

Fedora Networking :: No Wifi Option In Network Manager

Feb 22, 2011

I just installed F14 today, all day I have been trying to get my wifi to work, I keep running in problems I found many threads with links to download drivers. I did that and in the README file loses me. It talks about compile driver from the source code.

PHP Code:

View 7 Replies View Related

Fedora Networking :: Network Connection Manager Gone / Not Working

May 15, 2011

Fresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.

What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.

View 6 Replies View Related

Fedora Networking :: Ipw3945 - Wpa_supplicant - Don't Want To Use Network Manager

Jun 26, 2011

I have a laptop with ipw3945 on. I don't want to use Network Manager. this is my wpa_supplicant.conf

PHP Code:

[code]....

I do as root:

PHP Code:

[code]....

In another terminal as root I do:

PHP Code:

[code]...

but no IP address got.

View 8 Replies View Related

Fedora Networking :: Does Network Manager In F15 Support Bridging

Aug 24, 2011

does Network Manager in Fedora 15 support bridging and if so, can you configure the bridge using your wireless interface? All of the information I've come across so far said that you can NOT create a bridge using a wireless interface, and that Network Manager doesn't support bridging, but this info was also from Fedora 12 and below, so I don't know if it's still relevant for Fedora 15. I would certainly hope that by now you can make a bridge from a wireless interface. Even the lowly VMware Player offers this option.

View 2 Replies View Related

Fedora :: Fix For WPA2 TKIP Repeated Asking For Password?

Sep 24, 2009

I just wanted to get this out:

I have had this problem (entering the correct password and having Fedora repeatedly ask me for the password again) for a long time (since FC9) and have recently found what I believe to be a solution.

I know, you'll probably think it's extremely simple, but I just wanted to help any newbies to Fedora who might have the same problem as me.

Solution:

Right click on the Network Manager icon, and select "Edit Connections"

Go to the Wireless tab, and delete the entry for your wireless!Then manually re enter all of the settings.

This worked for me with a WPA2 TKIP connection, but it might work with a WPA2 AES also.

View 3 Replies View Related

Fedora Networking :: Fedora 15 - Virt-manager Network?

Aug 30, 2011

I'm a new fedora-user and are having some problems setting ut everything as i want:

The host to always use WIFI
The host to not see the ethernet-connection.
The guest to use ethernet
The guest to be able to get wifi when no ethernet is avaible.
The guest to install from PXE

The guest is going to be a Windows 7. Nothing is done so far, as i cannot figure out how to do this.

View 1 Replies View Related

Fedora Networking :: Network Manager Disconnects After 2-3 Seconds But It Works / Fix It?

Jul 3, 2009

I'm currently on F11, and experienced problems with Network Manager. Whenever I to connect to a network, wired or wireless, it just seems to try to connect, and then after 2-3 seconds, it just reports "Disconnected"..

Then I switched to network, and both wired and wireless works. so I don't think there is any driver or hardware issue...

Does anyone have any idea of this problem? The network manager have worked on the live CD version ( before installed to HD).

View 12 Replies View Related

Fedora Networking :: Fixing Network Manager / Caching Name Server

Sep 5, 2009

I've set up a caching nameserver on my laptop running Fedora 11. The problem with this is that NetworkManager always overwrites the entry that points to the local nameserver. NetworkManager no longer respects /etc/dhclient.conf or at least its scripts run after dhclient.conf. Also it doesn't respect /etc/sysconfig/ network-scripts/ifcfg-* setting of DNS{1.2}.The man page of NetworkManager describes scripts that run in /etc/NetworkManager/dispatcher.d which can be run when interfaces are brought up and down. I've written a script that will put the entry needed for the local nameserver.

View 1 Replies View Related

Fedora Networking :: Network Manager - Terminating Current Connection

Sep 19, 2009

I have installed recently the Fedora 8 in a computer and during installation it was set a static IP with the netmask and gateway. At first it worked well, but after some boots the connection begins to fail. It seems that the network-manager withdraws the static IP and tries
to get connection via DHCP. Below is the /var/log/messages file during the failed connection:

Code:
Sep 19 10:36:53 canario avahi-daemon[1695]: Interface eth0.IPv4 no longer relevant for mDNS.
Sep 19 10:36:53 canario avahi-daemon[1695]: Withdrawing address record for fe80::20d:87ff:fe0c:355f on eth0.
Sep 19 10:36:53 canario NetworkManager: <info> SWITCH: terminating current connection 'Auto Ethernet (eth0)' because it's no longer valid.
Sep 19 10:36:53 canario NetworkManager: <info> Deactivating device eth0.
Sep 19 10:37:07 canario system-config-network[2195]: -+ //etc/modprobe.conf #011eth0 alias sis900 .....

View 5 Replies View Related

Fedora Networking :: Use Network Manager To Connect To A Pptp Vpn Connection?

Feb 25, 2010

I have updated the system this morning and the vpn stopped working!It gives me an error: invalid secrets.I use network manager to connect to a pptp vpn connection, I use fedora 12.Does anyone know the problem?

View 2 Replies View Related

Fedora Networking :: Did Network Manager Kill Eth0 Access

May 6, 2010

I have a troubling networking situation that is compounded by the system being remote without any out-of-band mgmt in place nor a serial connection - but am relying on a coworker entering commands into the terminal for me, or doing stuff in the GUI I have an FC12 i386 install running, that was up and stable for 6 days. Primarily this was only being used for a deployment of nTop. Up through Monday evening, I was connecting to the system (in NY) via VNC (here in SF), and was successfully watching nTop do its thing.

Tuesday morning, I go to connect to SSH and I can't get in. The NAT translation is still in place on the firewall, but there is no connection to the NIC/eth0 from the router. This is what I've had my coworker run:

[code]...

I was going to try and have her run the /sbin/mii-tool eth0 tomorrow a.m. just to verify that the interface isn't physically bad? But this is a brand new desktop, and I can't for the life of me understand why this interface went down. I also have the internal IP on a DHCP reservation, which is the same IP listed in IPADDR in the ifcfg-eth0 file - could this be a problem? should I remove the DHCP reservation? I did this so I could SSH to a public IP which I have NAT'd back to the internal 10.0.x.x address I had my coworker take a look at the GUI, and the eth0 properties are "inactive" and the "Activate|Deactivate" buttons are greyed out.I suppose I can have my coworker grab the /var/log/messages and copy to a USB drive, then email me that from another workstation.

View 3 Replies View Related

Fedora Networking :: Network Manager Setting Invalid Error

Jun 23, 2010

I am using fedora 13. when i restart network service then following error.

View 3 Replies View Related

Fedora Networking :: Ifconfig And Iwconfig See Wlan0 But Network Manager Does Not

Aug 22, 2010

I just installed Fedora 13 from the Live CD. FIrst off I read the guide and the first step doesn't even work for me. System>Administration>Network does not exist. If I go to System then Preferences I see a Network Manager but it looks nothing like what these screen shots look like. [url]

No wireless card show up in the wireless tab of Network Manager. How can I fix this since my card is listed in ifconfig and iwconfig. Wifi card is a Zonet zew2500p

View 2 Replies View Related

Fedora Networking :: Yum Broke Wireless - Network Manager Crashed

Apr 30, 2011

So, after doing a 'yum update', I minimized the terminal and completely forgot about it - so I accidentally went ahead and suspended my laptop before it had finished. I resumed my laptop and noticed that yum hadn't finished 'cleaning up' the packages. Nevertheless, yum continued and the process finished. After an hour or so use of the internet (wirelessly), all of a sudden the wireless network disconnected, and NetworkManager crashed. I rebooted my computer only to find that NetworkManager now says that my 'firmware is missing' for my wireless card.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved