Networking :: Redhat Does Not Retry Renewing DHCP Lease More Than Once?
Apr 23, 2010
We have 20+ Redhat servers on our network and every so often our DHCP server goes down. When it comes back up we have to go around to all of our RedHat servers and restart networking manually. Other OS's (Ubuntu, Windows, etc..) will continually try to get a DHCP lease so that when our DHCP does come back up it requires no work from us for them to get back on the network. But it seems that Redhat only tries once and if it fails it never tries again. Have to go around to 20 different servers (some of them are at remote locations) is less then ideal when this happens. how we can get Redhat to continually try to get a DHCP lease like other OS's?
View 1 Replies
ADVERTISEMENT
Mar 25, 2010
I am puzzled with trying to configure a linux (openSUSE) client to dhcp to eBox DHCP server. I am using dhclient to lease an IP address with dhclient eth0 -s 10.45.48.108 and get a response
openSUSE11232CL1 dhclient: DHCPDISCOVER on eth0 to 10.45.48.108 port 67 interval 4
openSUSE11232CL1 dhclient: DHCPOFFER from 10.45.48.108
openSUSE11232CL1 dhclient: DHCPREQUEST on eth0 to 10.45.48.108 port 67
openSUSE11232CL1 dhclient: send_packet: Network is unreachable
openSUSE11232CL1 dhclient: send_packet: please consult README file regarding broadcast address.
The server reports eBox141 dhcpd: DHCPDISCOVER from 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
eBox141 dhcpd: DHCPOFFER on 10.45.200.2 to 00:0c:29:3e:57:a3 (openSUSE11232CL1.domain.net) via eth0
I interpret this as the server receives the request and the client accepting it but the lease does not last long and the connection breaks. what this could be and why the connection breaks? Or my undestanding is totally wrong on how it works and should work? And BTW, where is that README file that's referenced in the message I receive on the client?
View 2 Replies
View Related
Feb 7, 2010
I have a home WiFi network that has been working fine for ages, which currently supports two Windows-based laptops and a WM5 smartphone. They all connect to the WiFi router (Linksys WRT54G) which in turn connects to the ADSL modem (Huawei MT882). The router is configured with a WEP key, the SSID is not being broadcast, and all MAC addresses must be whitelisted. I try to follow good wireless network security practice. I also have NAT running between the router and the modem.
Everything is working fine for the Windows clients, and now I am trying to add my Linux box to the mix. I am setting up an older HP Pavilion 510a desktop with Ubuntu v8.04LTS, using a Realtek RTL8185 WLAN card. The machine has an onboard RTL8139 LAN adaptor also, which works fine when I plug it in directly to an ethernet port on the wireless router. The WLAN, however, does not seem to be getting a DHCP packet, and keeps on autoconfiguring with a 169.254.x.x address. When I try giving it a static IP address it doesn't connect either.
As you can see from the screenshots below, the WLAN is working fine. I have it installed using the ndiswrapper and Windows drivers. I've been through the Comprehensive ndiswrapper troubleshooting guide but that did not resolve my problem.
I configured the network myself, and it works perfectly for my Windows machines. It is just my lack of experience with Linux which is preventing me from getting the wireless to work under Linux. I can get a HDCP packet in Linux when I am connected to the LAN using the RTL8139 adaptor, but not on the WLAN using the RTL8185 adaptor.
View 9 Replies
View Related
Jan 26, 2011
Is there any way to get an async notification (perhaps through something like a Linux message queue or Unix socket) when a DHCP client is either unable to renew its lease, or the address obtained changes from the previous value? I've got the ISC client and will dig into it to determine if it supports such a feature, but thought I'd ask here in parallel. (I'm trying to find out if there are any DHCP clients out there which already support this capability.)
If you're curious: We have an application where we're doing auto-registration of an IP camera to an external server. If the camera's dynamically assigned address changes, we need to restart the auto-reg state machine. I've seen implementations where a socket is opened and a SIOCGIFADDR ioctl used to fetch the IP addr, but I'd sure like to avoid polling like this if possible.
View 1 Replies
View Related
Mar 3, 2011
The system I am working on is a xdsl board running Linux kernel 2.6 and receiving dhcp address from a Microsoft XP PC. when looking through the dhclient.leases file I can see there's something wrong with renew time and stuff.strange calculation. as far as you know is this normal? You may find below the dhclient.lease file.
lease {
interface "tap0";
fixed-address 10.0.1.16;
filename "***";
medium "-link0 -link1 -link2";
[code]....
View 2 Replies
View Related
Jun 22, 2011
I got a strange issue here: We are using ISC DHCP v4 which is default in Open SuSE 11.4. These two options 'default-lease-time' and 'max-lease-time' are set in all subnets, with values between 43200 (12 hours) to 518400 (144 hours). See partial dhcpd.conf below please.Now the lease time from Windows client's ipconfig output is only 10 minutes. Why? (dhcpd on servers restarted many times. ipconfig /release, ipconfig /renew on client run many times)
Code:
lease-file-name "/etc/dhcpd.leases";
default-lease-time 43200; # 12 hours
[code]....
View 1 Replies
View Related
Feb 8, 2010
first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies
View Related
Jun 5, 2010
I have a Zotac Ionitx A-U. I can't get it to establish an internet connection with the wired ethernet within Ubuntu. The chip is detected, but trying to bring up the connection stalls out at trying to obtain a DHCP lease, like this:
DHCP DISCOVER ...
DHCP DISCOVER ...
No DHCPOFFERS received
Specs:
Ionitx A-U
Ubuntu 10.04 x64 kernel 2.6.32-22 (also didn't work in 9.10)
[Code]...
View 3 Replies
View Related
Aug 1, 2010
I'm running an up-to-date Fedora 12 machine with the Gnome desktop (meaning with Network Manager). My network connection is a wired ethernet to a switch which then connects to a Netgear router. For some reason, this machine can't renew its leases with DHCP, so NetworkManager deactivates eth0, taking my machine off the network. I have to click Network Manager and enable eth0, which seems to work every time.
How can I fix it? Here are the relevant bits from /var/log/messages showing a failed DHCP request and then the successful renewal.
Code:
Aug 1 04:00:08 ironton dhclient[12452]: DHCPREQUEST on eth0 to 192.168.1.1 port 67
Aug 1 04:00:08 ironton dhclient[12452]: DHCPNAK from 192.168.1.1
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): DHCPv4 state changed reboot -> expire
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): device state change: 8 -> 9 (reason 6)
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> Marking connection 'System eth0' invalid because IP configuration expired.
[Code]...
View 5 Replies
View Related
May 26, 2010
I've set up a permanent DHCP lease for my MAC address. I did this hoping to resolve the fact that I share my Internet ADSL connection with my wife and my daughter (the latter a great bandwidth hog)!
View 5 Replies
View Related
May 9, 2011
I would like to be able to schedule a limit for an IP connection for my kid's computers/iPods. Since I know the MAC addresses of their various hardware items, is there a way to shut down their connectivity at a particular time via the DHCP server or perhaps a firewall rule?
Running Ubuntu 10.04 and Shorewall is being used for the firewall.
View 4 Replies
View Related
Mar 28, 2010
Looking at var/log/messages below, it looks like I'm not being offered a lease on this particular network. I can successfully connect to the network because iwconfig wlan0 reveals my network ssid and the access point I'm connected to. But pinging google.com gives me nothing..
Code:
root@darkstar:/# tail -f var/log/messages | grep dhcpcd
Mar 28 15:45:42 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
Mar 28 15:46:13 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
Mar 28 15:46:44 darkstar dhcpcd[5329]: wlan0: adding IP address 169.254.76.182/16
[code]...
View 1 Replies
View Related
Jul 20, 2011
How to set up DHCP server in Redhat Linux 6
View 1 Replies
View Related
Jul 16, 2010
I'm having some problems bringing up my wireless card at boot time on my Red Hat Linux 9.0 box. After some investigation with the boot scripts, I noticed that it was having problems with the DHCP negotiations when the ifup wlan0 command is issued.I then tested the command outside of the booting process and everytime the command is issued the first time, the dhclient fails to get any DHCP offers and returns with the message Unable to obtain a lease on first try. Exiting. and then exits.
If I then issue the same ifup command again a second time, it successfully receives a DHCP offer from the router and receives the needed IP address, and after this, the Internet connection on the box works fine. It is consistently doing this everytime. Why is it failing to obtain a lease the first time?
View 1 Replies
View Related
Jul 15, 2010
Why trying to avoid ranting about my Linksys router, I'll try and keep things short. I have a Linksys router in which the default firmware was terrible and would not correctly renew its DHCP lease. After getting feed up with that I flashed dd-wrt on the router and now it works better but randomly DNS queries would stop being resolved. To rule out the chances that it is my ISPs DNS servers I switched my DNS to openDNS, same problem happens (although I have to admit openDNS is a lot better than what my ISP has).
Anyways I'm about feed up with it and about an inch away from drop kicking the thing out my window. To avoid that I figured I will give it one more change and instead of using my Linksys as my network gateway I'll move all of that to my home server, and make the Linksys just an wireless AP. Besides setting up DHCP, DNS, and iptables on the server is there anything else I will need to know and setup on the server to make this work?
Side note anyone using openSUSE for DHCP know if setting up reserved IPs for certain MAC address is possible?
View 2 Replies
View Related
Dec 3, 2010
I have a openSUSE10.2(X86-64) Linux DHCP Server in my environment. It has a lot of VM's and Desktop systems which get added continuously. Also, it has a lots of Static-IP entries.Part-IIssue:The DHCP Server stopped leasing the IP's somehow.Workaround:1. Stopped the dhcpd service. (service dhcpd stop)2. Navigated to /var/lib/dhcp/db folder.3. Deleted the "dhcpd.leases" and "dhcpd.leases~" files.4. Recreated the "dhcpd.leases" file. (touch dhcpd.leases)5. Started the dhcpd service. (service dhcpd stop)
View 2 Replies
View Related
Nov 15, 2010
I've been trying to figure out a strange DHCP problem my girlfriend's having: She can only get (or renew) a DHCP lease once; Subsequent tries timeout. I tried switching from network-manager (which uses dhclient) to wicd (dhcpcd), and noticed a key difference: With wicd, restarting helps (again, works once, then another restart is required). With network-manager, I haven't been able to get another lease, period.
Exploring the dhcpcd case further, I found that suspend/hibernate do not correct the issue; a full restart is required. Neither does `/etc/init.d/wicd restart` help. I don't remember if I tried killing dhcpcd; I'll have to test that. The current workaround is to restart the computer after each disconnect. It's pretty annoying, though, so I'd like to try to collect enough specifics to file accurate bug reports for each dhcpcd and dhclient. Is anyone familiar with these projects? Are these known issues? Any ideas how to hone in a bit? My gut tells me there's some state somewhere that needs to get flushed.
View 2 Replies
View Related
Sep 22, 2010
I want to use a script to renew my IP every 5 minutes. I have a static IP and it seems that when another person enter the same IP address as mine, my IP is stolen and is assigned to him.
I know that Cron is responsible for running a script at some time interval. How can I use that to renew my IP?
View 2 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
Jul 18, 2010
Whenever I disconnect the LAN cable from my Linux box or reset the router the IP doesn't seem to get renewed and so I'm unable to SSH into it or connected to the webservices it is running.When it boots up it gets an IP fine from DHCP on the router but once the system is up and something changes like the router reboots or cable is disconnected, then this is when the problem occurs.sometimes if you go back to the actual Linux box in my loft and open a terminal and runcd /etc/init.d/./networking restartthis will cause it to get a new IP from the DHCP server but this isn't very convinient and a bit haphazard.
View 6 Replies
View Related
Jun 9, 2010
I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues.
The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again.
How to force all TCP connections to resend data without delays in GNU/Linux?
View 2 Replies
View Related
May 11, 2010
I have a rather puzzling error. I recently purchased an usb external hard drive with the intent of installing Ubuntu on it. I have had great success with installing various linux flavors on usb thumb drives but I need a little larger space for engineering applications that I use. Anyway, I removed my laptop's internal hard drive and installed ubuntu 9.10 on a recently formated external hard drive. Everything worked fine at first. Upon restarting I get an error that says "no boot sector" and it asks to hit either f1 to retry. When I hit retry, Grub loads most of the time. Occasionally it does not work. Is Grub just not installing correctly? I searched for this error but I found nothing that directly applied.
View 2 Replies
View Related
Feb 8, 2010
I'm using fwrite to write into a file stored in a normal USB flash drive. My question is: if for example a sector is damaged, does fwrite try with another one before getting me a result? If not, If I recall fwrite, will it try with a different one or with the same?
View 3 Replies
View Related
May 30, 2011
How the dhclient retry working(Background Process).
View 3 Replies
View Related
Feb 10, 2010
I get the following error if i try and send to my mailserver. I'm running SuSe 11 with sendmail and dovecot. I can send emails no problem. I have looked around and looks like it's not my diskspace on the machine i don't have any quota's on mailboxes.
View 1 Replies
View Related
Aug 17, 2010
How do you configure proftpd so that once a user has failed to login and reached the MaxLoginAttempts. That they can not retry logging in for another 4 hours ?
View 6 Replies
View Related
Jan 6, 2011
I have two servers running Linux 2.6.9 kernel.When i telnet to server1 , the telnet will be disconnected only after 3 login failures. While, when i telnet to server2, telnet will be disconnected after the first login failure.expect server2 to behave the same way as server1 when telnet is executed.Kindly tell me where i should tweak my servers so that i could achieve what i expect.
View 1 Replies
View Related
Jan 11, 2011
I had Windows XP working. I then put in a new hard disk and installed Redhat 5 on it. rom then i could only boot into Redhat. Further, everyting is very slow. Anothe rproblem is that Redhat does not see my netwrok so I cannot get onto the Internet. I need to have the choice of booting into XP or Redhat.
View 2 Replies
View Related
