Networking :: Set Up A Wifi Webserver In Adhoc Mode?
Sep 3, 2010
What I want to do is have two ad hoc servers running. One ad hoc network would host a web page giving stats on all the players and other ad hoc server to host an online multi player game. This way my clan can practice in any enviroment and setting (i.e parking lot outside at a park, motel rooms) without messing with a wired network. When someone connects to my laptop through wifi ad hoc mode, how can I automatically direct them to my web page? I've search this question high and low on alot of forums and google,but could not find anything relevant. maybe I'm just not asking the question right.I'm not sure,but I also might want to port forward tcp:28960 or UDP: 28960, 20500, 20510. Which is better for call of duty 4 Modern Warfare 2?
View 1 Replies
ADVERTISEMENT
Mar 7, 2011
root@debian:/etc/network# ifup wlan0
SIOCSIFFLAGS: Unknown error 132
SIOCSIFFLAGS: Unknown error 132
[code]...
View 1 Replies
View Related
Jan 9, 2011
After fixing an issue with sleep mode, my WiFi is automatically disabled on my Ubuntu installation on boot while the switch is on. For some reason, it seems that Ubuntu has an issue communicating with my BIOS. As a fix to this problem: I disabled the C4 sleep state. My Ubuntu installation now boots up fine but the LED on the WiFi indicator glows orange, indicating that it's off; while in Windows it glows blue, indicating that it's on.
View 2 Replies
View Related
Aug 4, 2010
Here's the setup:
I have 2 laptops:
1. Dell Inspiron 8600 with an intel 2200BG wifi card (Ubuntu 10.04)
2. Asus eeePC 1000 (Ubuntu 9.04)
Internet setup:
Laptop 1 connects to a 3G connection and shares it with laptop 2 using an ad-hoc network.
I upgraded to Lucid on Laptop 1. Prior to the upgrade everything was working. Now, when laptop 1 tries to connect to the ad-hoc network it almost immediately disconnects and tries to reconnect again.
Ad-hoc network settings:
The ad-hoc network uses a WEP key. In IPv4 settings, "Share to other computers" is selected.
Dmesg output:
Code:
are: requesting ipw2200-bss.fw .....
** (nm-applet:4259): WARNING **: _nm_object_get_property: Error getting 'Default' for /org/freedesktop/NetworkManager/ActiveConnection/327: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:4259): DEBUG: going for offline with icon: notification-network-wireless-disconnected
View 9 Replies
View Related
Aug 31, 2010
I tried setting up a adhoc wifi in my debian laptop, so that my other laptop running Ubuntu could connect to it. Though the access point made on Debian laptop is visible on Ubuntu laptop, I could not establish a connection.Then I used create new wireless network tab to create a connection named test1. Though it shows up on Ubuntu box, i couldnt connect to it.
View 4 Replies
View Related
Sep 1, 2011
I want to block the Mac address in adhoc network to check the behaviour of the aodv protocol.Is there any other utility available for this purpose rather than Mackill..?
View 1 Replies
View Related
May 5, 2010
I have an Asus EEEpc 1000H netbook with both Ubuntu and WinXp. I just updated from Ubuntu 9.1 to 10.04 and I can no longer connect to my home WiFi!
I have a Netgear router and the network is WPA-PSK password protected. All other devices can perfectly connect. The netbook can under WinXp and could with Ubuntu 9.1. Now, with the 10.04, it keeps asking for the password but never connects. Obviously I triple checked the password and there's no chance of a mistype error.
View 9 Replies
View Related
Jun 10, 2010
I got two issues with my wifi usb adapter:
1) it cannot see any networks around
2) i cannot setup it in master mode to use my PC as a router
As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:
Code:
Ubuntu 10.04
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
TP-Link TL-WN321G wifi usb adapter as seen as
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
$ iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:off/any
[Code]....
View 4 Replies
View Related
Feb 6, 2011
I have an old dell desktop with a belkin wifi dongle that connects to the internet right away when i boot in live cd mode but when i try while its installed/installing i get the connecting animation on the wifi, thing, on the top bar.it connects then loses connection and cannot reconnect 5-10 minutes later. this is driving me crazy, i have homework and i just need this thing on the internet already so i dont have to stress my macbook with a minecraft server
View 2 Replies
View Related
Aug 20, 2009
I have the following machine :
laptop : Dell Inspiron E1505
Wireless : Intel Pro Wireless 3945 (ipw3945-1.2.2 + ipw3945d-1.7.22 + ipw3945-ucode-1.14.2 / eth1)
Printer : HP C4580 Photosmart wireless (hplip-3.9.8)
Ethernet : Broadcom Corporation BCM4401-B0100Base-TX (b44.ko / eth0)
External Modem : Siemens CL-110 ADSL
OS : Fedora 6+11 (currently on fc6)
The external modem is connected via the laptop ethernet and provides the internet connection.
The printer is connected via wireless adhoc to the laptop's IPW3945 wireless card. I use firestarter as firewall. When firestarter is disabled everything works fine. If enabled it blocks my printer. I have tried to open every possible port via firestarter (according to several other threads) with no luck. My printer is set (under system-config-printer) as :
Code:
hp:/net/Photosmart_C4500_series?ip=192.168.2.5
$ netstat -rn .....
View 2 Replies
View Related
Nov 3, 2010
I am trying to establish an adhoc connection in my ubuntu 10.10 and share my cable internet throughout this connection with my Android phone. I have read some guides but I couldn't be successful. (I have another windows mobile, and it couldn't connect too). I have installed Firestarter in order to enable internet sharing. My main Problem is that, no one can obtain IP adress from the adhoc connection, whether Firestarter is active or not. What should I do in order to make the other devices gain IP address from this connection. If I have to set static IP what should I do exactly?
View 9 Replies
View Related
Apr 12, 2011
I'm using Ubuntu 10.10 (Maverick Meerkat) on my HP laptop. My office desktop uses Windows 7 Home Edition. I created an adhoc connection on my desktop pc because I also want have an internet connection on my laptop. But Ubuntu seems do not detected the adhoc I created on my pc. I also tried to connect using the hidden wireless network and entering all the necessary access (wep key, etc...) but still didn't work. Is there any way that I could connect my Ubuntu on a adhoc? Is that possible?
View 2 Replies
View Related
Dec 18, 2009
Ok let's say I have Apache Webservers on 2 different machines within my network, I have http://outterABC.com setup at dyndns.org to point to my modem at home, and my router forwards Port 80 to the ServerA Machine (i.e. 192.168.0.3). I can access my webpage I setup for the Server A Machine.
But what I want to try and do is somehow access my ServerB machine's website that is on my same network. I tried something like this http://ServerB.outterABC.com and the apache page came up with something like the page wasn't available. I want to access the content of the ServerB website, but because I have only one router, i can only forward Port 80 site traffic to my ServerA machine's website. I'm sure it's a different syntax I should use but i'm just not sure what I should enter to bring up the apache root web page for the Server B website via http://outterABC.com
I tried setting up DNS A records on ServerA, but I don't think it will work with what i'm trying to do above.
View 1 Replies
View Related
Jan 6, 2010
I'm looking for a USB wifi which supports master mode, 11n modulation, 5GHz band (with master and ad-hoc support for this band) and has detachable antenna connector.
View 1 Replies
View Related
May 25, 2009
I am looking for advice on a what I am sure is a very basic procedure but I have never had to set this up before and am not sure where to start.
I am running 2 CentOS5.3 boxes. I have one webserver connected to the internet and behind a firewall. I would like to set up the 2nd server (database) behind the webserver and completely inaccessible from the internet. Ideally so it can only be accessed by first ssh'ing onto the webserver and then ssh'ing from there onto the database. The webserver connecting locally to database.
From what I have seen it looks like I need to set this up using NAT but I have never done this and do not know what is involved. Can someone point me in the right direction and optimally outline the steps I need to take to hook this up? Do I need to worry about any specific hardware configuration as well?
View 3 Replies
View Related
Sep 15, 2010
I've actually gotten a webserver (hardy heron, server edition) working before and had a Joomla site up I could find on the net. But I did a fresh install of Lucid Lynx (desktop edition, that I added some packages to to use as a server). Between the router (wrong ip address?), port forwarding (set right?), my domain nameservers (godaddy) and the DynDNS service I use (for dynamic ip) I must have a wrong setting because, my joomla website shows up at localhost, but not 'out there' so to speak. I would like to get this site out there and working soon, as it's one I'm just doing free for a Community Garden.
View 2 Replies
View Related
Mar 31, 2010
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).
My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 5 Replies
View Related
Jul 25, 2010
Im a linux newbie and I'm some sort of creating an Internal webserver or Intranet for short locally. My local webserver ip address is 192.168.0.1 and when im trying to view this on my xp clients i will type it in the url 192.168.0.1. What im trying to do is view my webserver instead of typing ipaddress I'll type hmij.edu.ph for example and trying to resolve it locally through local dns resolution.. so every time i type for example. my webserver name hmij.edu.ph i want it to redirect it to my local webserver w/out going to the internet first.. I already setup dnsmasq for dhcp and dnsclient resolution. is there any better way on how i can achieved this??im a little bit of confused on how to make this work. tnx in advance!
View 13 Replies
View Related
Jun 2, 2010
after trying several pci and usb network cards none were able to have their ssid broadcasted. The question that i have is: Can a suse box be converted to act as an acces point without the use of atheros based hardware, without switching over to ubuntu and or debian, without the use of openwrt?
View 4 Replies
View Related
May 5, 2011
I have WiFi printer, HP DeskJet F4500. If suse firewall is on, yast doesn't see that printer. If I turn firewall off, Yast sees printer and install it just fine. Problem is, that when i start firawall again, yast denies whole printer and turn it off mode in Yast. What firewall rule i have to make to get this work?
View 2 Replies
View Related
Sep 21, 2010
I ordered this USB 802.11n dongle for about $10 and am having problems.I found a firmware related bug (Bug #595455) that keeps it from working out of the box and got around that. I put the right firmware file in the right place and CAN CONNECT TO B or G Access Points.hen I put my AP in N-Only mode, I can see the network, but cannot associate. With the AP in mixed mode I can Associate using G.The most interesting thing I found was something that had very
few google hits (like 4). In the dmesg output after associating I see the message:
Successfully associated, ht not enabled(0, 1)The most interesting thing about this is the (0, 1) at the end.I don't know what that means but it seems like a clue as to what the problem is.This device uses the realtek chipset 8191S, there are conflicting reports on this, but all the reported possibilities seem to use the same driver from realtek (rtl8712_8188_8191_8192SU_usb_linux_v2.6.0006.2010 0625).Here is some random info:
Dmesg output:
[85082.620027] usb 1-3: new high speed USB device using ehci_hcd and address 6
[85082.754586] usb 1-3: configuration #1 chosen from 1 choice
[85082.755456] ==>ep_num:4, in_ep_num:1, out_ep_num:3[code]........
View 1 Replies
View Related
May 30, 2010
Long term Fedora user, I have recently decided to set up a small shuttle computer as a media centre (using mythTV), data store/NAS (so all my data is centralized), mini web server, etc. After installing I had the fun of trying to get my audio working correctly (which I did eventually .. after finding out I unplugged the audio after the second reboot and solved it after somewhere). After this, I got internet video searching working through mythTV using adobe Flash. I then went to bed only to find the internet not working (can't telnet, can't traceroute, can't anything). This is both as the mythtv user I have set up and as root.
The setup I have is:
PC -> router -> interweb
192.168.1.7 -> 192.168.1.1 -> interweb
I also have a laptop (F12) which is on 192.168.1.5.
The laptop has access to the internet just fine (no problem at router / interweb).
I have the only access to the router and disabled any ISP access (no changes in router).
I have the only access to the PC (no changes in PC).
I have set SElinux to permissive (no selinux issues).
I have temporarily disabled iptables on the PC (not firewall issue).
So, I decided to look at the differences between my two machines on the network. Initially the PC was missing the route:
169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0
I changed the services on startup so thet 'NetworkManager' was off, but 'network' started (exactly like my laptop). I turned off avahi-daemon, and any other network sort of daemon which doesn't match my laptop (which I have also customized).
I then set my eth0 config file to this:
Code:
# nVidia Corporation MCP77 Ethernet
DEVICE=eth0
HWADDR=00:30:1B:47:C4:FF
ONBOOT=yes
BOOTPROTO=none
TYPE=Ethernet
DNS1=192.168.1.1
USERCTL=yes
IPV6INIT=no
# DEFROUTE=yes
IPV4_FAILURE_FATAL=yes
# NAME="System eth0"
# UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03
IPADDR=192.168.1.7
NETMASK=255.255.255.0
NM_CONTROLLED=yes
GATEWAY=192.168.1.1
MTU=1432
# PREFIX=24
Commented out any lines which I didn't recognize. So, right now netstat -rn returns:
Code:
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
/etc/sysconfig/network:
Code:
NETWORKING=yes
HOSTNAME=sophie
And to me everything looks OK.
I even have inter-communication working fine (I can SSH between the two servers no problems - 192.168.1.7 <-> 192.168.1.5). I can do DNS queries from both just fine (nslookup google.com returns fine). I just can't get any information back from the net. Would it be work me doing a tcpdump or wireshark dump etc ('tcpdump > file' would be easier for me)?
View 2 Replies
View Related
Jul 26, 2010
I'm some sort of creating an Internal webserver or Intranet for short locally. My local webserver ip address is 192.168.0.1 and when im trying to view this on my xp clients i will type it in the url 192.168.0.1. What im trying to do is view my webserver instead of typing ipaddress I'll type hmij.edu.ph for example and trying to resolve it locally through local dns resolution.. so every time i type for example. my webserver name hmij.edu.ph i want it to redirect it to my local webserver w/out going to the internet first.. I already setup dnsmasq for dhcp and dnsclient resolution. is there any better way on how i can achieved this?
View 5 Replies
View Related
Mar 15, 2010
My server is installed on a guest OS on vmware. It really bugs me because I can't access it from the host OS's browser even though there is no discrepancy between /etc/hosts, /etc/sysconfig/network, httpd.conf files. Issuing ifconfig command also returns the same IP. I have also enabled netwroking in the vmware settings. And I can ping the guest OS's IP from the host.
View 3 Replies
View Related
Mar 31, 2010
I am trying to configure a BIND DNS server to handle three websites on my home network, (my site, my sons site and our test site). Since my ISP uses dynamic DNS, we are using DNS2GO to redirect our traffic, 9EACH SERVER HAS IT'S OWN VERSION OF dns2go running).My problem is that I can't figure out how to configure BIND since I don't have a static IP to enter into the named.conf or reslov.conf configuration files.
View 7 Replies
View Related
Mar 28, 2011
i am using fedora 14 in my lenovo z560 laptop. It contains broadcom wifi card. The configuration is.Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g LP-PHY [14e4:4727] (rev 01) Subsystem: Broadcom Corporation Device [14e4:0510] I want to inject monitor mode in my laptop to run kismet . But i can't. I installed broadcom-wl driver in my laptop but i think its not compatible to run monitor mode..
when i run kismet it show me error that :------ try some other open source kernel driver And the other is :- kismet find only binary value eth1 port. It isn't detecting wlan0 port
View 10 Replies
View Related
Jan 4, 2010
I'm interested in configuring two Netcomm NB504 WiFi routers to work in a Bridge configuration. ie. Local PCs ---> Router <----//----> Router <--- local PCs
The NB504 router doesn't appear to have a native "bridge" mode. However, it does run Linux according to the documentation. I'm interested to hear from anyone who has actually got two of these routers to work in a bridge configuration. I'm not interested in general theoretical comments - only solid advice. I am also not interested in using other hardware for this exercise - I have two of these devices available for use in this project.
View 4 Replies
View Related
Nov 23, 2010
I want to connect to my wireless adhoc network using terminal, the networks works ok with network manager I can connect to Infastuructuers ok, both of these work
Code:
Code:
They dont work with adhoc is there something i need to change.
View 3 Replies
View Related
Jun 21, 2011
I've a laptop which is connected to ethernet. I want to access internet from my N900 through wifi( available on Laptop). So i created adhoc network on laptop and connected my smart phone to it. But i still cannot access Internet from my phone. Where am I going wrong?? or is there another way to acces internet from my phone via laptop?
PS: I followed the procedure given in this link to create an adhoc network.
View 1 Replies
View Related
Jul 3, 2010
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies
View Related
