Windows computer continually generates images (AutoGrabnnn). All downstream analysis on linux computer. I need analog of rsync bringing files over as they arise. rdesktop seems to be the approach. Is this already described somewhere to bypass much trial-and-error?
View 2 RepliesI am backing up may data using Rsync via SSH. I am trying to find a solution that allows me to push my backups from windows and Ubuntu to a Ubuntu server. I don't like the solution that requires my windows machines to have shared drives. Not viable for laptop users that may piggyback on free wireless networks. I would also like a solution that has a GUI for the desktop user but not totally required. I will need a solution that allows me to restore files by date. I do a lot of changes to files on a daily basis and sometimes need an older copy of a file.
I love using Rsync as it is a very simple solution and extremely quick. The only thing I don't know how to do is recover different version of a file. It would be nice to see a visual representation of all the files and different dates of each file. I know I might be asking a little too much, but, it is after all, Linux.
I have problem with login into Windows 2008 server usning rdesktop 1.6. While I'm connect Windows 2008 host, prompts username and password i get an error: "Wrong username or password" but i'm sure that username and pass are correct (I can connect this server using windows Remote Desktop). My OS is Ubuntu 10.04 64-bit.
View 1 Replies View RelatedI have installed Fedora 11 and Fedora 8 on two differnt machines and I am doing an rdesktop to connect to a Windows 2003 server. The connectiviy is pretty fast when I try and connect the same from fedora 8 machine but it very slow when I try and connect it from fedora 11 system. I have tried using TS client but even then it is pretty slow. I have also tried using an Nvidia 8400 graphic card and Nvidia 9600 on Fedora11 OS.
I have also tried using Fedora12 OS as well. Is there any thing specific I can check on Fedora11? Or do I need to do some thing on my windows 2003 machine?
how to configure rdesktop to connect to a Windows (XP/2003) computer, but going through a Terminal Services Gateway or connecting to a Terminal Services Server through TLS/SSL? The command line options or any on-line documentation I was able to find, omits this entirely. Using the Windows Remote Desktop Client (RDP6) you can configure Terminal Services Gateway connections from the Advanced Tab. I suspect that rdesktop, gnome-rdp, tsclient et el can't do this yet as they support up to RDP5. Currently I am using a WinXP VM to accomplish this, but would like to do this natively on my Linux box.
View 3 Replies View RelatedUsing the following command, I can access a windows 2008 server: rdesktop -u myusername -d mydomain -p - -fP -r sound:local -r disk:myhome=/home/myhome serveraddress
connection works fine, and to start with I can see my local disk "\tsclientmyhome" and navigate around + open files. If I try to delete a file or rename a folder, I get an Error 0x8007048F:The device is not connected.
After this, I can no longer access the local disk. It says: "\tsclientmyhome is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Attempt to access invalid address." As I understand it, I should be contacting myself about permissions... Can anyone tell me what I need to do on my local ubuntu machine to fix this?
shed some light on what I am doing. I am wondering if I just havehings back to front.Server (MESH):Fedora 13Firewall ports open tcp 22(ssh), tcp 873(rsync)sshd service started
View 5 Replies View RelatedFinally went open source at home, but must be able to load QB to work with data files already for me to load into program. Will my system at home allow me to load QB Pro Premier 2009? Or alternative apps that will let me load and work with the data?
View 2 Replies View RelatedI need to understand what is happening with my VPN , I manage the Firewall server that have install POPTOP ($Id: pptpd.conf,v 1.10) for VPN conecctions. Actually only 3 users are using the service, about 1 month ago, I have problems with connection and service that consistently falls, sometimes it can get 1 hour of connection and then falls,My Server is on Centos , Kernell 2.6.18-53.el5PAE
This is my File on /etc/pptpd.conf
Code:
option /etc/ppp/options.pptpd
logwtmp
localip 192.168.10.1
remoteip 192.168.10.230-250
This is my File on /etc/ppp/options.pptpd
Code:
name servername
name pptpd
auth
refuse-pap
[code]....
So I am trying to learn a little about Cygwin and rsync. I'd like to rsync some data from a Windows machine to a Linux machine. I've got Cygwin installed but I can't figure out how to tell Cygwin were rsync will be pulling the data from; basically, how to set the directories that I want to be rsnyc'd. I've googled and googled but I can't seem to find the answer to this exact question.
View 4 Replies View RelatedI just tried to sync files from one server to another. After the sync process, I found the files are bigger than original ones.
I looked up the web and found someone mentions the rsync daemon. So I have to run the daemon on one server before I run the rsync?
The command I used is rsync --partial --progress -r source destination
use rsync to cp such files and dirs under /var/www/html/mydir directory but these two files(/dir4/1.html /dir4/2.html) cant rsync to dest mechine.
rsync configure file,below...
I am using Workstation machine linux 64bit, having two NICs I assigned diffrent IPs for two MAC IDs. Through router I connected both cards to a sing port.
My doubt is will it improve the bandwidth of path? or I need connect different socket?
Can anybody tell me how I can synchronise files between two computers in a network that have been modified or created within the last 60 days?
View 3 Replies View RelatedI want to backup windows PC's in my network to my ubuntu 11.04 pc, using rsync. Rsync is working, but I have to mount the pc's. A few details.
My server is named: server
The windows pc is named: \PC_OF_MARTIJN
The folder where the mount is coming is: /home/bastiaan/backup/mounts
Credentials are in /home/bastiaan/backup/credentials and they're called: martijn
So what I'm going to add to /etc/fstab is this:
Code:
//server \PC_OF_USER /home/bastiaan/backup/mounts/user cifs credentials=/home/bastiaan/credentials/user,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
Will this work?
I'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
I can get a connection to Windows server 2008 using rdesktop 1.6, but after a few seconds the connection is dropped and I get a message of and internal licensing error. I think rdesktop 1.6 uses rdp 5.x, and WIndows server 2008 uses rdp 6, but there must be some way to get a linux terminal server client to connect to Windows Server 2008.
View 2 Replies View RelatedI have a remote desktop session to a Windows 7 Workstation that keeps timingut/disconnecting after a minute or two of idiling. Also, sometimes it disconnects while I am in the middle of using it.I have tried turing off all NIC power saving options, the sound option for remote desktop, and all the go to sleep power saving options. I don't have any issues with remote desktop connecting to various Windows Server 2008 R2 Machines and VMs.
View 1 Replies View RelatedNoticed few discussions on ubuntuforums on the problem "ctrl alt enter key combination" not working in toggling full screen rdesktop connection on Window session. Dealing with the same problem. Tried noticed solutions and just not succeeded.
View 1 Replies View Relatedbasically i am able to connect to my other windows machine using rdesktop I want to be able to mount the window machine's partition (particularly my media folder cusermyaccountVideo) i know rdesktop ipaddr -r disk: blah blah blah mounts the partition onto the local machine however, i cant figure out what the specific commands are i tried followings but with no luck
Code:
rdesktop ipaddr -u username -p password -r :c=mntmntpoint
rdesktop ipaddr -u username -p password -r :c=mntmntpoint
rdesktop ipaddr -u username -p password -r :cmyaccountVideo=mntmntpoint
all these commands didnt work do anyone know how to do this? i thikn there must be a way
PS: no luck with smbfs as my machines arent on the same lan network (not sure if samba can connect remotely)
I have access to a "virtual" Windows server terminal, which I can access through my Ubuntu Linux via tsclient or rdesktop. Additionally, there are printer shares on this network, which can be accessed from any Windows PC on the network (including the "virtual" terminals); lets say the address is [URL]. Now, I open \printshares.company.com in the "virtual" terminal in rdesktop (avoiding tsclient since it has a Bug #94743 in tsclient (Ubuntu): Terminal Server Client isn't able to copy to/from clipboard) - and I can see all printers fine.. However, when I'm on my Linux machine directly on the work network, I try and do something like:
$ ping printshares.company.com
PING printshares.company.com (192.168.0.200) 56(84) bytes of data.
^C64 bytes from 192.168.0.200: icmp_req=1 ttl=124 time=10.4 ms
[code].....
Is it possible to retrieve the - let's call them "connection settings" - from the Windows terminal session, so I could replicate them under Linux when running smbclient? the IT department running these Windows servers is quite irritated by people using Linux; and will offer no support to those kinds of "customers". Furthermore, if obtaining those settings requires some installation on the client session, since I don't have permissions to install anything on the Windows terminal session.
I launched a script using rsync and the option -delete-before, however the destination folder was the wrong one. I noticed it only seconds after but it was still too late. In less than 5 sec rsync deleted over 200gb of data on my external hard drive... It is not in my Trash nor on the HDD trash but it's not possible that the data were ereased in less than 5 sec! (I dont know how rsync handle deletions.) I know I am really stupid but is there a way to get back all my data (mainly HD movies in mkv, mp4 and some avi)
View 1 Replies View RelatedI have successfully backed up my files using a script to a remote server with a log file output.However the log file is appended each time.I wish to have a different log file each time with date and time and have yet to figure that part out.
View 2 Replies View RelatedMy rsync takes backup of everything from the differenct linux servers to my backup device which is 2 TB only .Since it takes almost full backup of source , it consumes space lot in the backupdevice. So i wanted to keep all my backup files of one month old latest files in backup device, it should remove all files more than one month data.
View 2 Replies View RelatedI've been given an old rsync script to update some data files on a few different servers... I am trying to understand what directory on the server it gets it's files as the way it seems to refer to the data on the server is:
data_source='random-server.fqdominan.net::Firstlogic'
Not sure what the "::Firstlogic" part with the two :: means.
Here is the entire script:
Code:
#!/bin/sh
# Begin user-configurable options #
# Who can run this script
authorized_user='appdtools'
# From where we rsync the update data
data_source='random-server.fqdominan.net::Firstlogic'
# From where we rsync the rollback data
rollback_data_source='random-server.fqdominan.net::Firstlogic_rollback'
# Where updates will go
data_target='/Firstlogic/postware/dirs'
# How to do the rsync .....
# Here is where we do the "work".
splash# Check user and print warning
if [ "${rsync_test}" == "-n" ]; then
update_address_data# Test the monthly update
else
stop_address# Stop the address standardizer
update_address_data# Load the monthly update
clean_logs# Empty the old log files
start_address# Start the address standardizer
fi
I have not tested this script yet but evidentialy it used to work. I just need to find out where to stick the files on random-server.fqdomain.net to test it out. The server it points to no longer has the files on them...
I'm trying to do an rsync from one RHEL box to another, but when I run it in verbose mode to see why its not working, all it does is show the root folder, then one folder in, then it stops. There are about a dozen folders under that root folder where the rsync starts, with about 350GB data spread between them. How can I tell why this isn't working? the same command is setup to run as a cron job, which was working.
View 1 Replies View RelatedI am using remote boot via PXE boot to an a remote machine. So okay, but when I load the files via NFS, I can not transfer the / lib to my station. I recompiled the kernel, which already influence all NFS packages built in this set as Obrigadao.
View 1 Replies View RelatedAt work we are planning on migrating XP machines to ubuntu, and from there connect via remote desktop to a Windows Server 2008. That part is working perfectly, but our problem now is how to set up ubuntu to "share" the local webcam, so it can be used from the remote session in the server. Going through rdesktop man page there is a redirection option, but doesn't say anything about USB devices.
View 1 Replies View RelatedI'm looking for a most possible, secure solution to transfer data using rsync over Internet between 2 linux server.
I have 3 option: SSH, IPSEC and Kerberos.
Which one in your opinion should be most secure solution?
I'm looking for some software for syncing lots of data (about 60-90GB) over local network between two machines Ubuntu and Windows XP home.By syncing I mean at least the functionality of auto - copying both ways -> if some file / directory appears on one of the machines it'll be copied to the other.we can assume that files are never modified nor deleted.
View 4 Replies View Related