Networking :: Mobile Brodband Not Enabled?
Jul 27, 2011my problem is that , after Selection my modem and my ispand put the user name and password i get on the network icon in tha top panelmobile brodband not enabled
View 8 Replies
ADVERTISEMENT
Fedora :: Control Desktop Environment With A Java-enabled Mobile Phone?
May 21, 2010installing the software BluePad, which allows a user to control their desktop environment with a Java-enabled mobile phone. I am still adjusting to Fedora (and some other Linux distros) from Windows and I am unfamiliar with installing and executing software programs. Also, if you could also include any pre-requirements involved in the installation..
View 3 Replies View RelatedUbuntu Networking :: Samsung Mobile Modem Not Detecting When Connecting New Mobile Broadband Connection?
Oct 17, 2010i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedUbuntu Networking :: Garmin-Asus Gps Mobile Phone Is Excellent / Easy As Mobile Internet Connection
Aug 29, 2010I just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
View 1 Replies View RelatedGeneral :: Make Samsung E1410 Mobile Compatible With Mobile Internet In Ue 2.9
Jun 28, 2011how can i make my samsung e1410 mobile compatible with mobile internet in Ue 2.9
View 1 Replies View RelatedUbuntu Networking :: Wireless Networking Refuses To Be Enabled?
Nov 3, 2010I have a compaq c784tu and it was shitty with xp. Vista is quite crap, so i turned over to ubuntu 10.4. The configuration of the laptop is: 1.73 GHz Intel Pentium Dual Core Processor T2370 with 1-MB L2 Cache, 533 MHz FSB featuring Intel Mobile 945GML Express Chipset Motherboard, 2-GB PC2-5300 DDR2 667 MHz SDRAM (Maximum 4-GB in 2 slots), a 160-GB SATA 5400 rpm Hard Disk Drive and 8x Super Multi Double Layer (8.5 GB) Slot-in DVD Writer.Everything worked like a charm and I was able to connect to the internet through a public wifi network. However, I came home this week to my mothers house, where they have a dsl-router to connect to the internet whih uses bridge mode pppoe. I tried to connect to the internet through it, and it initially couldnt. However, I got around that by doing a clean install of ubuntu. I was able to then connect to the internet using "sudo pppoeconf" and "sudo pon dsl-provider"One night the network manager app on the top left disappeared and would not come on. I figured I had fried my wifi adapter, however, lspci -v confirmed its presence.Further, "system>admn>system testing" detected the adapter aswell. I tried the iwconfig command in the terminal the result was:
lo no wireless extensions
eth0 no wireless extensions
wlan0 IEEE 802.11bg ESSIDff/any
[code].....
Ubuntu Networking :: Wireless No Longer Enabled
Feb 22, 2011About two days ago was when I was last able to connect wirelessly. I cannot recall a change I made to the system that would have caused this problem. Items to consider:
1. Under Network Manager, I am unable to click "Wireless Networks"
2. I ran the following code under in the terminal (sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rtl|rt2|rt3|rt6|rt7|usb|witch|wl'; iwconfig; cat /etc/modprobe.d/* | egrep 'acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl'; sudo hwinfo --netcard ; cat /var/lib/NetworkManager/NetworkManager.state; sudo lsmod) and proceeded to run enter BIOS where I enabled the Network Driver.
3. I am still unable to get the "Wireless Networks" to even be selectable under the Network Manager
4. When I return to BIOS, the computer shuts down immediately.
5. The start-up menu won't allow me access.
6. I have an HP G60-445DX notebook and an MCP77 Ethernet..
[Code]....
Networking :: Start DHCPD After Network Enabled?
Sep 22, 2010How can I start dhcpd after Network manager has set up a new connected device. The reason being that dhcpd will not start when there is nothing connected to the network interface. Therefore I would like dhcpd to start after a new device is connected. Now I have found references if ifup-post but this does not relate to NM, is this correct?
View 5 Replies View RelatedNetworking :: Confused With Two NICs, No Internet When Both Are Enabled?
Jul 14, 2011I have been looking for a solution for this but am not certain how to word it to get a viable answer.My scenario:
Athena
Win7/Ubuntu 11.04
eth0 10.11.12.100/16 gateway+dns: 10.11.12.1
[code]....
Networking :: Ipv6 Stack Not Enabled On Centos 5.6
Jul 25, 2011I've got a little server setup on my local network and I'm trying to configure it to use miredo. I've got my laptop successfully using it, but for some reason miredo gives this error when I try to start it:
Code:
Error: IPv6 stack not available.
also running "lsmod | grep ipv6" gives these results
Code:
ipv6 270049 1 cnic
xfrm_nalgo 13381 1 ipv6
I get the impression that ipv6 is not enabled on my server, but I'm not sure how I enable it short of doing a reinstall.
Networking :: No Internet Connection When Firewall (UFW) Enabled
Jul 6, 2010When I enable my ufw it completely shuts me out and I have no internet connection. When I do:
Code:
sudo ufw status numbered
I get:
Status: active
To Action From
-- ------ ----
[ 1] 80 ALLOW IN Anywhere
[ 2] 80 ALLOW OUT Anywhere (out)
But I need to disable my ufw in order to reconnect back to the internet. Why is that? Doesn't the above rules indicate that I should have inbound and outbound traffic even if my firewall is up?
Fedora Networking :: F11: Ethernet Is Enabled But Can't Make A Connection?
Jun 27, 2009I just fresh installed Fedora 11, and tried to connect via ethernet. I connected the cable and connection was started (in the network managed the two gray circled turned green) but then instead of connecting me the connection was aborted. I am behind a router if it helps and made sure eth0 is enabled. PS this is the output of "service network start":
Quote:
[root@Gal-PC subsys]# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
[code]......
Fedora Networking :: Both Cards Are Enabled And Set To Connect Automatically?
Nov 15, 2010I just installed Fedora 13 on my desktop computer and ran into the same problems I did when I tried to install which was i could connect to a network but couldn't access the internet. I decided to install Fedora 14 since I already installed it on my laptop. I'm still running into the same issue, I can connect to my network but cannot connect to the internet using my PCI NIC or onboard NIC. Networking is enabled and I'm getting a IP address from my router. I ran "lspci" and it shows me both network cards which, please correct me if I'm wrong, makes me think that the drivers are installed.
I'm also curious if the VNC client/server could be used through a WAN. I would like to remote into my computer at home when I'm not there and see the gui. I had SSH installed at one point but it was just text. If there is better program please let me know. why I would have Services on my laptop but not on my desktop? Both computers are running the same version. Both cards are enabled and set to connect automatically. I can get a IP with both NICs. I only have one plugged in at a time.
Ubuntu Networking :: Wireless Not Works With Security Enabled?
Apr 8, 2010I installed 9.04 clean yesterday to try and once again move from Windows to Linux and I thought I would give it a real try this time to learn the new OS. Well, right off the bat my wireless connection does not work. By default my WPA/WPK security was set on my router. My wireless adapter does connect to the router but there is no internet access. If I remove the WPA/WPK security and leave it open I can connect and I do have internet access but as soon as I re-enable WPA/WPK security I lose internet access. I even tried WEP security and same result. What the heck is going on with this? I am not going to leave my router unsecured but that seems to be the only way this works. I also upgraded this morning to 9.10 and same problem so this is not limited to 9.04.
View 4 Replies View RelatedUbuntu Networking :: 11.04 Not Connecting Wirelessly To Wpa Psk Aes Enabled Router?
May 3, 2011I am using an HP dm3 1030us laptop. The wireless adapter is and Atheros 5009. I have a fresh and clean install of Ubuntu Natty in it. I am trying to connect to a Linksys WRT54G2 that is in G mode using WPA2 Personal with AES. Router info:
Router Information
Firmware Version: 1.0.01 build 003, Mar. 26, 2008
Current Time: Mon, May 02 2011 20:34:37
MAC Address: 00:22:6B:4A:44:DF
Router Name: WRT54G2
Host Name:
[Code]...
Networking :: Samba Asking For Password - Guest Share Enabled ?
Aug 21, 2010I have an old laptop trying to mount a share with samba on a server.
Laptop and server both running ubuntu 9.04.
When I try to mount a share on the server
I get a password prompt, and no server passwords work.
This is a guest share, and my two windows laptops mount it no problem with no password.
Here's the relevant part of the smb.conf:
Laptop and server are on the same workgroup.
Networking :: SNMP Error - Encryption Support Not Enabled
Nov 1, 2010When I run the following GET commad:
./snmpget -m ALL -M /data/net/naamab/snmp/snmp_mib/ -v 3 -a MD5 -l authPriv -u test1 -A welcome1 -x DES -X privpass 127.0.0.1 NOVELSAT-MODULATOR-MIB::nsModLineCMMode.0 -d
I get the error:
Encryption support not enabled.
snmpget: USM encryption error
I have defined a user (and user, view and access) that should work with encryption:
snmpd.conf:
createUser test1 MD5 welcome1 DES privpass
group debugGroup usm test1
view debugView included .1
access debugGroup "" usm priv exact debugView debugView none
General details:
I am using net-snmp on linux embedded
version 5.5
Configuration (part of it):
./configure --target=mips64-octeon-linux-gnu
--build=mips64-octeon-linux-gnu
--host=i686-pc-linux-gnu
message dump:
Sending 64 bytes to UDP: [127.0.0.1]:161->[0.0.0.0]
0000: 30 3E 02 01 03 30 11 02 04 1D 23 6A FA 02 03 00 0>...0....#j....
0016: FF E3 04 01 04 02 01 03 04 10 30 0E 04 00 02 01 ..........0.....
0032: 00 02 01 00 04 00 04 00 04 00 30 14 04 00 04 00 ..........0.....
0048: A0 0E 02 04 4C 08 7B B5 02 01 00 02 01 00 30 00 ....L.{.......0.
Received 118 bytes from UDP: [127.0.0.1]:161->[0.0.0.0]
0000: 30 74 02 01 03 30 11 02 04 1D 23 6A FA 02 03 00 0t...0....#j....
0016: FF E3 04 01 00 02 01 03 04 24 30 22 04 11 80 00 .........$0"....
0032: 1F 88 80 2D 53 AF 7D 00 00 00 00 00 00 00 08 02 ...-S.}.........
0048: 02 02 CF 02 03 01 11 C5 04 00 04 00 04 00 30 36 ..............06
0064: 04 11 80 00 1F 88 80 2D 53 AF 7D 00 00 00 00 00 .......-S.}.....
0080: 00 00 08 04 00 A8 1F 02 04 4C 08 7B B5 02 01 00 .........L.{....
0096: 02 01 00 30 11 30 0F 06 0A 2B 06 01 06 03 0F 01 ...0.0...+......
0112: 01 04 00 41 01 09 ...A..
Networking :: Detect If Eth0 Has Been Enabled Properly On Startup?
Mar 16, 2011building a box with no other interface than tcp/ip. now in case something goes wrong when changing the /etc/network/interfaces via ftp and when rebooting the system cannot bring the interface up I would like to be able to detect it and replace the interfaces file with a default one stored on the system.
View 1 Replies View RelatedNetworking :: NAT Stops Working When Load Balancing Is Enabled?
Dec 5, 2010I am using the routing multiple upstream providers solution available on internet using iproute and gwping script. It works great but the problem I am facing is;
Code:
ip route add 192.168.15.0/24 dev eth1 src 192.168.15.2 table ptcl
ip route add default via 192.168.15.1 table ptcl
ip route add 192.168.16.0/24 dev eth2 src 192.168.16.2 table nayatel
ip route add default via 192.168.16.1 table nayatel
[code]....
Ubuntu Networking :: SSH To A Mobile Laptop?
Sep 13, 2010I have two dual-booted Windows/Ubuntu machines--one desktop and one laptop--and both have SSH servers installed. At home, I use port-forwarding to connect to these servers externally.
I am interested however, in being able to connect to my laptop's ssh server no matter where it is. I am interested in this partly due to anti-theft precautions and partly just curiosity. I know there is anti theft software that lets you remotely modify your computer--from ANY IP address--and I want to know if you can do this with SSH. Imagine someone stole my laptop and connected to the internet in a random location. Assuming i somehow know this ip address, is there any way I could SSH to it? (I doubt the router would forward port 22 or whatever to this computer...)
Networking :: Simulate Mobile Agents With NS2?
Jan 7, 2011how to simulate mobile agents with NS2 (docs , code ......)
View 2 Replies View RelatedNetworking :: Get Connected To Internet Using Mobile?
Jun 18, 2010linex,and let me tell you I am very excited to be using linex.Its awsome,I cannot belive how fast my intenet works.OK all I want to know is,whether its possible to connect to my laptop via my mobile, so I can go online when I'm out and about.I don't have blue tooth capabilities on my laptop.so I opdered a wireless bluetooth dongle from ebay.Will I be able to connect
View 1 Replies View RelatedUbuntu Networking :: XPS 1330 Broadcomm 4312 With 9.10 - Wireless Not Enabled
Feb 2, 20101 ) Machine Brand and Model (PC/Laptop):
Quote:
Dell XPS 1330.
2 ) Wireless Brand, Model and Wireless Chipset:
Quote:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Bus 002 Device 004: ID 05a9:7670 OmniVision Technologies, Inc. OV7670 Webcam
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[Code]....
At this point, I have installed the STA driver for the device, though I have also tried with B43 (fwcutter). I have also tried with ndiswrapper with windows driver. All these cases, the end effect is the same.
I can see "Wi-fi" LED light up. When I bring up the KDE control module for networks, "Wireless" is disabled. However, when I right-click on the network manager icon on the taskbar, I see "Enable Wireless" checked on.
I am wondering if in the process of installing the ndiswrapprer drivers, I am messed up something?
Ubuntu Networking :: Can't Connect To WPA Enabled Networks After Upgrading To Lucid
May 15, 2010I decided to upgrade to Ubuntu 10.04 a few days ago. My internet then stopped working.I changed the security for my network to WEP (instead of WPA)Is there another way around this problem or can I just download another driver? I do not intend to stick with a WEP secured network.
View 6 Replies View RelatedUbuntu Networking :: Wireless Is Disabled On One Laptop And Enabled On The Other With Same Kernel
Aug 23, 2010I just want to enable my wireless network card... how do I do that? It worked perfectly in Jaunty and it also worked when Jaunty was upgraded to Karmic, but in a fresh install of Karmic it is displayed as DISABLED:
sudo lshw | grep network:
*-network:0 DISABLED
I know this is not a bug in any kernel or anything. I now have Karmic on two identical laptops (Fujitsu Siemens AMILO, rt2500pci chipset) with the same kernel (2.6.31-22-generic). Wireless is enabled on one, disabled on the other. This is wearing me out... I am on the verge of buying Windows 7...
Ubuntu Networking :: Hardware Button For Wifi Has To Be Enabled At Every Power On?
Jul 26, 2011After upgrading from 10.10 to 11.04 via the online upgrading method I had much trouble getting wireless to work but after following the instructions at .Driver/bcm43xx it burst into life, that is until I powered off and now I have to sudo modprobe b43 before the hardware button for the wifi will work and and then I am able to get online. This is for every power on session!! Once enabled it will switch on and off via the hardware button and the light is operational. Before the sudo modprobe b43 the buttonoes something as evidenced by sudo rfkill list after each press of the button. Is there any way to have the command sudo modprobe b43 inserted somewhere in the power on sequence? This was a working function on 10.10!
View 3 Replies View RelatedNetworking :: Outbound Connections Not Working When Firewall Enabled - Opensuse
Jan 17, 2011I have problem on VPS running opensuse. When I enable firewall outbound connections stop working. I have tried everything I know (not much when it comes to firewall (iptables)) but could not solve this.
Here is my ifconfig:
Code:
I used xxx.xxx.xxx.xxx to hide real address.
Fedora Networking :: Can't Connect Mobile Broadband
May 1, 2009Im able to use nm-applet just fine to setup broadband card. Its a Sprint Sierra 598u. Im running Fedora 10 KDE version. Anyone know how to get it working? i tried the setup process but all it tells me is set up GPS or CDMA so i go CDMA for mine, but then it has some default name, and no providers, as the UBUNTU version did at least...i setup best i can but then after closing configs, i go to nm-applet icon in bottom-right and it doesn't show the mobile broadband connection, also any wireless connections don't work for some reason, but DO show up. just wont connect (which i got every so often when using ubuntu on the machine, was usually a switch off or restart away from fine
View 8 Replies View RelatedUbuntu Networking :: Can't Transfer From Mobile To Pc / Resolve This?
Jan 13, 2010I have a nokia n70 and currently i cant tarnsfer anything from mobile to my pc. i have setup my bluetooth device (usb) but everytime i try and send file from my mobile to pc, it says 'sending failed'. any solutions?
View 2 Replies View RelatedUbuntu Networking :: How To Set 3g Or Hsdpa With Mobile Broadband
Jan 13, 2010i have both a vodafone and 3 mobile broadband dongles. they both work out of the box, however i am only getting gprs, while i can get 3g/hsdpa using my windows box. is there any gui configuration manager or terminal commands i can use to set it to 3g/hsdpa only? im running ubuntu 9.10.
View 4 Replies View Related