I got a new dsl modem/router today and now for some reason I can't login into an ssh session using putty and windows using the hostname of the debian box. I can login using the ip though. Also, it seems I can still access the debian box via samba/windows explorer using the host name.
View 3 Repliesi have debian lenny installed, download the debian-507-i386-netinst.iso and installed with the VirtualBox virtual machine, the network is working, when i run the apt-get update downloading the cache:
View 1 Replies View RelatedI have been using Debian for three or so years now. Not sure what all the difference it makes, but I'm installing Debian Squeeze on a Sony Vaio desktop computer... With an nVidia GeForce 5200 which works perfectly in other computers and on the same computer when dual booting with Windows XP. I've tried and installed several times already to no avail. When I fresh install just the standard system, no graphic desktop, no Xorg, no servers, no nothing, just the standard system, command line only. When I do the initial boot on this blessed computer, part way through the boot process my monitor shuts off and it says frequency out of range (thats a message from the monitor itself, not the computer or debian).
The same install process I've executed countless times. I thought it was a dependency issue, problem with X perhaps. I can install lenny, but not squeeze. When booting in single user mode, it seems like it craps out either during or right after it loads or does something with the "drm" - you know how during the boot script, the machine "flashes" the fonts and the screen blips... its seems to me like that's where its happening at. The monitor works just fine, I really don't think that's the problem. But it is frustrating and I have no clue where to go about finding what the issue is if I can't see whats going on.
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI run into a problem when trying to update from lenny to squeeze. Seems that util-linux fails to install due to some error and that this causes xorg as well as udev to fail. If this is the case then it might be a bug in the post-installation script for util-linux..Am I on the right track or is it completely wrong?
View 5 Replies View RelatedI am running a lenny server. So I don't have physical access.How can I upgrade to Squeeze without everything breaking? Also, I want to use "apt-get", not "aptitude".
View 8 Replies View RelatedI just upgraded to Debian Squeeze (from Lenny) and there are several errors occuring.
The first one is that whenever I want to use mplayer it gives me the following output:
Maybe that has to do with faulty drivers, I'm not sure yet.
What's bugging me a little bit more is whenever I start a shell like konsole or xterm it displays the following:
It roughly translates to:
A third problem is when I try to use something like mplayer or java and then try the tab completion I get yet another error.
Which would be:
So I get "bash: _get_comp_words_by_ref: command not found", however it's not like that with all of my applications. Tab completion after the command "vlc" for example works just fine.
I have a Debian Lenny LAN Gateway machine running shorewall, squid and a source install of ossec in the opt dir. The machine is an Intel Atom based asus hummingbird with no gui. It works well and has been very stable so far. However, i am considering upgrading to Squeeze. Is it feasible to attempt to upgrade this machine, or am i realistically looking at a reinstall and reconfigure with Debian Squeeze over a long weeked?
View 2 Replies View RelatedI installed a Debian server a few time ago, with the Squeeze version.
Now I want to upgrade it to Jessie, but all related documentation only talk about the procedures to upgrade from Wheezy to Jessie.
What should I do? Upgrade first Squeeze to Wheezy and after that to Jessie, or I can upgrade from Squeeze to Jessie?
Now when new stable debian is squeeze I was wondering how do I apply updates to my lenny distro?I just want to apply all updates available for lenny, but DO NOT WANT to upgrade my lenny to squeeze.
View 1 Replies View RelatedI live in Swizterland and am using a Swiss mirror.I want to upgrade my Lenny installation to Squeeze
View 6 Replies View RelatedCan not log into Speedstream 4200 external Adsl2 modem connected via ethernet cable. I know the ip is 10.1.1.1 to log in but browser returns back nothing, not even sure if system is seeing modem once plugged in. Running Ubuntu10.10.
View 2 Replies View RelatedSince upgrading my laptop to Squeeze, terminals (tested Gnome terminal and xterm) show simply a "$" prompt; machine, path and username are missing. What's really annoying though is that tab completion doesn't work, it inserts a tab character instead. Fooling around showed me that typing in the command "bash" brings everything back to what I'm used to. So in my dire newbiness do I ask, how do I reenable bash as the default shell for these programs?
View 5 Replies View Relatedwhen I tried to upgrade my computer from Lenny to Squeeze and it downloaded everything but it's stuck at installing udev which it said it couldn't do on the 2.6.26 kernel. I then did update-grub and Squeeze's 2.6.32 kernel was seen (on grub). I have grub-legacy chainloading (if I'm not mistaken) but I don't have grub2 installed. When I try to boot through the 2.6.32 kernel so that I can complete the upgrade (that is to install udev and have everything working fine), instead of reaching the OS, it says something along the lines of "kernel panick not syncing vfs" and something about "root(hd1,0)".
View 10 Replies View RelatedI've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround
View 3 Replies View RelatedI'm currently using Debian Lenny 5.0.7 and I tryed to upgrade to Squeeze. I followed the instructions from Debian's Guide:
1. I changed my repositories to squeeze in sources.list
2. # aptitude update
3. # aptitude install apt aptitude dpkg
4. # aptitude safe-upgrade
After this last command, the computer kept working for about 7 hours, it consumed 2 gb RAM and 1 gb swap, and in the end aborted with the following message:
I searched around and I found out that this error is somehow related to C/C++ package compilation, but I found nothing specific related to Debian's upgrade.
When I had Lenny installed I made this computer be my alarm clock (with sanduhr) to wake me up for school in addition to my mom's TV (because I am a heavy sleeper) and now I cannot use this computer to do so. I'm not saying it's a bug. I'm just asking, how do I enable it again? I know that with Lenny to enable/disable beeping, I went to System=>Preferences=>Sound but now I don't see how to make beeping work again.
View 11 Replies View RelatedI am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
View 14 Replies View RelatedI have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
View 6 Replies View RelatedA week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.
After upgrading to squeeze I have now X Server 1.7.7 installed and it won't start.
When I try to run startx script, monitor gets blank for few seconds and then I get back to command prompt and no errors is displayed.
When I try the same as root, system locks up with blank screen and no functioning keyboard.
Initially I had kernel 2.6.28 which worked fine with earlier Lenny's X Server and Matrox P650 AGP video card. After upgrade I found, that Matrox P650 is not longer supported in new xorg and I swapped it to Matrox G550 AGP card.
Tried mga driver's many options, upgraded to kernel 2.6.37.2, tried with Matrox G200 PCI and Savage 4 Pro AGP card but without a success.
With kernel AGP support turned on I got both with Matrox G550 and Savage card an MTRR error: "error setting MTRR, Invalid argument (22)". Without AGP support in kernel, Matrox G550 gets initialised as PCI card and no errors and X still not working. Same with Matrox G200 PCI card.
With vesa driver the behavior is also the same and output at the end of Xorg.log file is almost the same.
So I understand, that this is some X server problem?
Nothing special in xorg.conf file and tried without it also.
End of the Xorg.0.log file:
>>
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
[Code].....
Finally ran the upgrade from lenny to squeeze and ran into a few issues. I have to admit this is the first dist-upgrade I've ever had go this badly (kernel issues, xorg issues, mysql transition problems, mythtv... Yikes!).Anyway, the first problem I'm trying to fix is getting dpkg to like the new squeeze kernel. Here's the errors
Code:
Errors were encountered while processing:
linux-image-2.6.32-5-686
[code]....
I recently upgraded from Debian Lenny to wheezy (testing). I use a popular 3G modem, the Huawei E220. In Lenny everything worked fine. I use wvdial to connect and the script from lenny, which worked just fine.Unstable behaviour goes like this:I connect, pppd starts, then, either immediately or after a few seconds, the modem hangs up (pppd errorcode 16). Upon retry a SIM Error is being thrown or the /dev/ttyUSB0 node vanishes. Un/Re-plugging the modem and dialing again results in a working connection (mostly). Is there any possibility finding out why the modem hangs up (because a web research revealed that there are a million possibilities for this behaviour)?
View 1 Replies View RelatedYesterday, I ran a security update that upgraded my Squeeze kernel from 2.6.32-48squeeze8 to 2.6.32-48squeeze9.
Ever since then, my suspend to ram (STR) function is broken.
The machine will suspend normally, but will not resume. When I try to awaken the machine, I can hear the fan in the tower start up (the subject machine is a desktop computer, please see below for specifics), but the machine seems to be otherwise dead (e.g. the monitor stays blank, pressing the "caps lock" key on my keyboard does not activate said keyboard's "caps lock" led, Ctrl-Alt-F[x] has no effect, etc). My only recourse at that point is a hardware reset (ouch!).
I tried running Code: Select allpm-suspend from a terminal, with no joy. Same result running Code: Select allecho -n "mem" > /sys/power/state from a terminal.
I checked the /var/log/pm-suspend.log file and noticed that each Code: Select all...performing suspend line used to (before said kernel upgrade) be directly followed by a Code: Select all...Awake. line, but, now, all said Code: Select all...performing suspend lines are followed by an Code: Select allInitial commandline parameters... line.
Before this, STR has worked well ever since I first loaded Squeeze on this machine back in 2012.
Code: Select allSqueeze 6.0.10; 2.6.32-5-amd64
Intel i7-980 Gulftown CPU
Asus P6X58D Premium Motherboard
EVGA GeForce GTS-450 Graphics Card
G.SKILL Ripjaw DDR3-1600, PC3-12800, 1.5v RAM (6x4GB sticks, 24GB total)
Crucial RealSSD C300 128GB SSD
Western Digital Caviar Black 1TB HDD
Corsair HX850 PSU
[CODE]
I've found myself using Ubuntu more recently because of newer packaged apps, so I finally decided I'd upgrade my laptop and desktop”each amd64—to Squeeze, instead of starting a bunch of apt-pinninng. I started with the laptop, which despite my preparations is now broken.
View 14 Replies View RelatedLast nigth I upgrade my system to squeeze and it whent well except for grub-pc and udev. If i try to upgrade now udev will not install do to problems with the kernel version and grub-pc can't seem to find the boot image.
[Code].....
After doing a dist-upgrade today, my one year old install of squeeze will no longer boot. It stops with a black screen and has to be hard reset. Cant even get to tty1. The last line in dmesg is: cfg80211: Calling CRDA to update world regulatory domain
mike@vaio ~ $ lspci | grep Network 06:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100.Just wondered if anyone has any ideas before I restore from a backup?
I have actually done quite a lot with Linux servers over the years. One thing I haven't ever done is upgrade one. At this time, however, it looks like my Lenny server must be upgraded to a newer MySQL, and I'm beginning to think it is easier to upgrade the entire installation.Is there a recommended way to upgrade Debian without disturbing home directories, non-standard directories such as /mystuff, config files such as my.cnf and smb.conf, etc?
View 6 Replies View Relatedis it possible to simulate upgrading a Squeeze installation to a Wheezy or Jessie installation, on a OVH server ?I would like simulate upgrading server, and if not problems, upgrading in real time.I don't do that manipulation, and I don't do mistakes on a production server.
View 2 Replies View Related