Debian Installation :: Best Way To Upgrade From Lenny To Squeeze
Feb 7, 2011
A week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
View 14 Replies
ADVERTISEMENT
Jan 2, 2011
I am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
View 14 Replies
View Related
Feb 7, 2011
I have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
View 6 Replies
View Related
Feb 3, 2010
I have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
View 14 Replies
View Related
Feb 17, 2011
my mouse wouldn't work in any fashion after going through most of the install process from Debian Lenny to Squeeze (couldn't click, move the mouse, etc. under both Compiz and Metacity). My system is a Lenovo ThinkPad T61 laptop; I keep the touchpad disabled, but the button mouse (TrackPoint) wouldn't work either. I was following the instructions here:
[URL]
So, the first thing I did was run the following commands, as it says to do:
# apt-get upgrade
# apt-get install linux-image-2.6-686
# apt-get install udev
Then, I rebooted my machine into the new kernel (2.6.32-5-686). I got a ton of udev warning messages at startup (all along the lines of "SYSFS{}= will be removed in a future udev version, please use ATTR{}= to match the event device, or ATTRS{}= to match a parent device, in something-or-other" - details can be provided if needed), but got a functioning prompt. I logged in, ran startx, and everything worked except the mouse, which couldn't do anything - as if it wasn't recognized at all. Switching window managers from Compiz to Metacity, as mentioned before, didn't help. "modprobe psmouse" revealed that that module was correctly loaded.
Rebooting into my old backported kernel (2.6.32-bpo.3-686) restored mouse function, although I still had the udev warning messages (so maybe those aren't relevant, I don't know). Apparently, something about the different kernels is causing the problem, but I'm not sure what - any thoughts? I haven't wanted to complete the upgrade with "apt-get dist-upgrade" without knowing that I'll have a working mouse, since I need a functional GUI at the moment and don't have a good way of fixing it if I trash it.
View 4 Replies
View Related
Jul 30, 2011
I have a server that was happily running Lenny. Last reboot was over 100 days ago. So I decided to fix it and install Squeeze.the upgrade went well, booted into grub. (with the grub2 test menus).When I login using the console, I get the nice GUI login, and something looks like the graphics world is being setup. The screen goes to a pretty light blue background. But there are no icons, no toolbars, no windows.I could believe something in the Xconfig is broken, say it thinks I have a much larger screen, and all the icons are off the edges. But that is only a guess.
View 5 Replies
View Related
Apr 17, 2010
I'm starting to bump into crusty software in Lenny and am looking to upgrade to Squeeze. However, there's no release notes yet and Googling for upgrade directions yields all kinds of variations, some of which talk about "interesting" issue. Thus, my questions:
1. How hard/messy is the Lenny to Squeeze upgrade at this time?
2. Where can I find straightforward, clear directions on how to upgrade?
For quite some time, I just stayed on testing and incrementally upgraded on a regular basis, but stopped after Lenny came out because security support was suspended. Now I'd like to climb back on that train.FWIW, I originally installed Slink in 1999 and haven't reinstalled from scratch since, despite several generations of hardware upgrades.
View 14 Replies
View Related
Sep 15, 2010
I run into a problem when trying to update from lenny to squeeze. Seems that util-linux fails to install due to some error and that this causes xorg as well as udev to fail. If this is the case then it might be a bug in the post-installation script for util-linux..Am I on the right track or is it completely wrong?
View 5 Replies
View Related
Sep 25, 2010
I am running a lenny server. So I don't have physical access.How can I upgrade to Squeeze without everything breaking? Also, I want to use "apt-get", not "aptitude".
View 8 Replies
View Related
Mar 28, 2011
I have a Debian Lenny LAN Gateway machine running shorewall, squid and a source install of ossec in the opt dir. The machine is an Intel Atom based asus hummingbird with no gui. It works well and has been very stable so far. However, i am considering upgrading to Squeeze. Is it feasible to attempt to upgrade this machine, or am i realistically looking at a reinstall and reconfigure with Debian Squeeze over a long weeked?
View 2 Replies
View Related
Mar 3, 2011
Now when new stable debian is squeeze I was wondering how do I apply updates to my lenny distro?I just want to apply all updates available for lenny, but DO NOT WANT to upgrade my lenny to squeeze.
View 1 Replies
View Related
Feb 11, 2011
I live in Swizterland and am using a Swiss mirror.I want to upgrade my Lenny installation to Squeeze
View 6 Replies
View Related
May 28, 2010
when I tried to upgrade my computer from Lenny to Squeeze and it downloaded everything but it's stuck at installing udev which it said it couldn't do on the 2.6.26 kernel. I then did update-grub and Squeeze's 2.6.32 kernel was seen (on grub). I have grub-legacy chainloading (if I'm not mistaken) but I don't have grub2 installed. When I try to boot through the 2.6.32 kernel so that I can complete the upgrade (that is to install udev and have everything working fine), instead of reaching the OS, it says something along the lines of "kernel panick not syncing vfs" and something about "root(hd1,0)".
View 10 Replies
View Related
Jan 8, 2011
I'm currently using Debian Lenny 5.0.7 and I tryed to upgrade to Squeeze. I followed the instructions from Debian's Guide:
1. I changed my repositories to squeeze in sources.list
2. # aptitude update
3. # aptitude install apt aptitude dpkg
4. # aptitude safe-upgrade
After this last command, the computer kept working for about 7 hours, it consumed 2 gb RAM and 1 gb swap, and in the end aborted with the following message:
I searched around and I found out that this error is somehow related to C/C++ package compilation, but I found nothing specific related to Debian's upgrade.
View 8 Replies
View Related
Jan 21, 2010
I've found myself using Ubuntu more recently because of newer packaged apps, so I finally decided I'd upgrade my laptop and desktop”each amd64—to Squeeze, instead of starting a bunch of apt-pinninng. I started with the laptop, which despite my preparations is now broken.
View 14 Replies
View Related
Sep 9, 2010
I have actually done quite a lot with Linux servers over the years. One thing I haven't ever done is upgrade one. At this time, however, it looks like my Lenny server must be upgraded to a newer MySQL, and I'm beginning to think it is easier to upgrade the entire installation.Is there a recommended way to upgrade Debian without disturbing home directories, non-standard directories such as /mystuff, config files such as my.cnf and smb.conf, etc?
View 6 Replies
View Related
Feb 16, 2011
I have upgraded from Lenny to Squeeze. Aside from a few installation issues, the upgrade went relatively smooth. I had a problem with the graphics proprietary driver not being installed after the upgrade but I was able to solve the problem. I also successfully upgraded the filesystem from ext3 to ext4. One thing that did break on the upgrade is that now I do not have the capability to add and switch workspaces. I went into compizfusion and added for horizontal workspaces, but clicking on them does not switch to them. If I right-click on the preferences, it does not let me allow to add any more workspaces. I can change the number workspaces displayed through Genetal tab in compiz but the graphics appeared that they exist, but when I click or try to even switch between them it does not work. I was able to send a window to workspace two but then I lose all access to it. So it seems it might even exist but the applet in bottom right corner does not let me switch between them.Also draggin a window of the edge to another workspace does not work.
View 8 Replies
View Related
Jun 11, 2010
I've done the ordinary sources.list update (lenny to squeeze) and Code: sudo apt-get update sudo apt-get install dpkg apt aptitude.sudo aptitude full-upgrade However, udev failed to install, and I used..Code: touch /etc/udev/kernel-upgrade and did full-upgrade again. Everything was going fine, I went through several package configurations and suddenly, after 30-40 minutes of "Unpacking Setting up." I just heard two system beeps and got an error similar to a kernel panic. The SYSRQs did nothing. Did a hard reboot.I got two kernels in GRUB now. + the GRUB2 chainloading option. Used this one and got Code: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block It's all the same with the 2.6.32-5-686 kernel kernel panic. Using the older kernel didn't fail on the boot up, but showed many UDEV related errors and logging in was impossible - all I get were segmentation faults. Forgot to mention it - my FS is Reiserfs
View 7 Replies
View Related
Feb 28, 2011
Whenever I reboot, I get GRUB and the _ pinking, and that's it. With rescue cd I can have chroot shell, to troubleshoot I did the upgrade-from-grub-legacy and installed it to both /dev/sda and /dev/sdb In recovery I redid the upgrade-grub and grub-install commands but still have the same "GRUB and _ blinking".
Because the text "GRUB" and then nothing I didn't enouncter while googling, I need to ask here for further troubleshooting.
View 10 Replies
View Related
May 23, 2011
I have just updated my Lenny 64 to a squeeze 64, everything is fine exept missing icons in the system menu, unfortunately I couldn't do any screenshot to show you the mess, did anyone experience the same problem and how was it solved.
View 6 Replies
View Related
Feb 26, 2010
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies
View Related
Aug 7, 2010
It seems as though every time that I want to grab a multi-arch, netinstall ISO from the site (not very often) I have an insane amount of trouble navigating the site and finding what I want. I mean there's no freaking "downloads" section that is split into testing and stable with links to the mirrors and such. I want to grab a multi-arch netinstall of both Lenny 5.0.5 and the latest, frozen Squeeze. I cannot find either. In other words, I'd have to burn six CDs instead of two. Not happening. Can somebody point me to the images that I am seeking?
View 2 Replies
View Related
Mar 5, 2011
I have just upgraded from Lenny to Squeeze the upgrade went smoothly except now blender won't launch.
This is the error message I get.
blender-bin: symbol lookup error: /usr/lib/libGL.so.1: undefined symbol: _nv000056gl
View 2 Replies
View Related
Feb 11, 2010
I just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
View 10 Replies
View Related
Mar 29, 2010
<Big Red Flashing Sign that reads, "NEWBIE with two Linux books and very little brain"> I just installed Sarge from a CD onto an old PC and ended up with Debian Linux 3.1, Kernel 2.4.
PC Specs:
Spacewalker Mainboard (AK31V3.1) SocketA AMD Athlon/Duron Processor based DDR Main Board
2x 256MG DDR DIM Q
350w power supply
NVIDIA GeForce AGP8X 6200 Graphics Card 256 MB RAM
Award Modular Bios v6.00PG 12/05/2003
LG Monitor
USB Mouse, Standard keyboard
I did not configure any servers or do any package selections but did manage to get the internet connection working (actually Debian managed that all by itself). I'd like to "upgrade" to Lenny.
Do I need to upgrade to Etch first or can I go straight to Lenny? At what point do I "upgrade" the kernel (before upgrading to Etch/Lenny? After?)
View 10 Replies
View Related
Apr 2, 2010
I'm trying to upgrade an etch system to lenny, I've updated my sources list to lenny and ran apt-get update. When I try apt-get install apt
apt-get install apt I get the following:
Reading package lists. Done Building dependency tree. Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. Since you only requested a single operation it is extremely likely that the package is simply not installable and a bug report against that package should be filed. The following information may help to resolve the situation:
The following packages have unmet dependencies. apt: Depends: libc6 (>= 2.7-1) but 2.3.6.ds1-13etch10+b1 is to be installed Depends: libstdc++6 (>= 4.2.1) but it is not going to be installed E: Broken packages
if I try apt-get install apt libc6, it wants to upgrade a whole heap of packages - will this be a safe thing to do ?
View 3 Replies
View Related
Aug 19, 2010
I was reading the upgrade documentation for an upgrade from etch to lenny on the following [URL].. And noticed that since today (or mayby yesterday not entirly shure) the documentation speaks about "squeeze" and not "lenny" I am not sure if any other info is changed as well but i find it confusing. Is this an error?
View 7 Replies
View Related
Feb 13, 2011
Now that the stable version of Squeeze is available, the newbie that I am is asking himself this almost existential question: should I get Squeeze or stick to Lenny?Some arguments in favors of Lenny that are coming into his mind are that there is more material, tutorials, in brief, more resources to find as to learn and solve problems.
But is this true and if yes, is it a reason?What about security?There is also this widespread saying that tells to always get the last release for performance and security reasons.Being in this position where I obviously don't have a lot of knowledge and experience to judge myself with all the elements, assessing thoroughly all the differents factors, I would have like to listen you opinion(s) on it.
View 12 Replies
View Related
Jul 5, 2010
I am currently running Debian Lenny on one of my external HDDs and Debian Squeeze on the other one. I found a package I like in lenny but it seems it has not been added to squeeze (yet). The package is ksirc and i like it because it looks and feels like mIRC that I used in windows. My question is can I install the lenny version on squeeze with out it having an adverse effect? My other question is what do I put into the /etc/apt/sources.list to do this? i now see that ksirc is also available in a sid (unstable) version. Is it safe to install this one to my squeeze distro? and again what do I need to add to my sources.list to do this?
Or could I just download the deb package and install it using dpkg? New to this and just looking for the best way to get a favorite software package.
View 7 Replies
View Related
Oct 4, 2010
How come there's no OpenSync in Squeeze, but in Lenny and Sid? Also, questions about packages where shout I direct them?
View 2 Replies
View Related
