Is there a reason that wifi on Vista seems faster/more reliable than on Windows? Does this vary be distro? Or wifi card? I have an Atheros b/g/n card and it seems like if I stay in the same location Vista outperforms Ubuntu 9.10 in this area.
View 5 Replies
Anyone knows who i can share my wifi between my vista (host) and ubuntu (guest) ?
View 1 Replies View Related[URL]... contains a great table comparing the implementation of IPv6 features in several Linux distributions. the problem is that it is over 4 years old. where I could find a more up-to-date resource?
View 4 Replies View RelatedMy laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View Relatedget WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies View Relatedthe only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies View RelatedAfter a reinstall of 10.10, I am able to turn on file sharing and so I set up a shared folder.
Windows Vista can see this folder but in my network place, there is only one icon, and it's a "Windows Network" icon. Upon clicking on that, I can see the local network, "Rompus Room".
When I click on Rompus Room, nothing happens for a while, then I get a message saying, "Opening "ROMPUS ROOM". Then I get the final message, "Unable to mount location", followed by, "Failed to retieve share list from server"
I'm running 11.04 (64 bit) get the following in my syslog
[Code]....
1) Why is this happening
2) How can it be fixed
3) How can it be avoided
I am just looking for an application that given two directories, for example /home and an USB disk of 500 GB, can comparate the files and subdirectories present in each directory, so I can know the files that are present in one directory but aren�t in the other.I do not know if the explanation is clear. but I just need some tool that can indicate me what files to copy from one place to another when periodically I do backups of my data...
View 1 Replies View RelatedI have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies View RelatedI installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
View 6 Replies View RelatedI'm looking at a new board that supports both DDR2 800 and DDR2 667. But, the FSB is only 667MHz. My question is: is there a benefit of using the DDR2 800 on the 667 FSB? That is, can the DDR2 800 be fully utilized on this system? What are pros and cons of such? Does the added benefit outweigh the additional cost of the RAM?
Note: I'm not looking to overclock at all, and this is not going to be used for 3D apps (games or video editing).
I am trying to boot up Vista Home Premium from USB since my internal (bootable) CD-RW drive has failed and I cannot boot up Vista from CD.
I have Ubuntu running in the Windows partition and all my windows files are in there so I don't want to do a full installation of Ubuntu (yet).
I formatted an 8GB USB stick into two partitions
I then copied over to /dev/sdb1 all files from a Vista CD using an external CD-RW drive (which is not recognised as bootable on USB port).
In my Dell BIOS settings I changed the boot sequence to be bootable from USB disk first.
then I tried to reboot Vista installation in the USB stick.
But I get this message ..."this is not a bootable disk .. insert a bootable floppy"
So I could not boot up the Vista installation files.
When the boot flag is "on" in a GParted created partition does this make the partition DOS bootable for Vista installation?
My question is - What utility in Ubuntu 10.10 can create a DOS bootable partition on a USB stick? It seems that the MBR might have been overwritten when I installed Grub 2.0.
I can Grub dual boot between Windows and Ubuntu but I can't get very far with Windows .. stalls in safe mode.
So a Vista repair is called for. I would prefer not to reinstall Vista afresh at this stage.
There is a thread here explaining how to repair Vista bootloader
[url]
But it assumes that I am able to boot from CD-RW drive.
I would like to check if the 3rd character from the end of a string is a d or p using awk and the field seperator would not help for this problem, i.e.
Code:
I'm trying to write a simple program that lists a menu and then asks you for your decision, and you can answer with a number or the name. However, I don't know how to add the second options (name).
View 14 Replies View RelatedI'm very new at Bash scripting and have a bone head issue that I'm trying (and failing) to resolve. I cannot get this one IF statement to work, it seems the comparison operator does not think the resulting number from the $b*$c+$b operation is an integer even though it is a number. Below is a small proof of concept script with the bit I'm having trouble with.
Code:
#! /bin/bash
a=800
b=700
c=.15
if [ "$a" -le "$(echo "($b*$c+$b)"|bc)" ]
[Code]...
i have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
View 7 Replies View RelatedI know it is wrong to use the "==" operator to compare the equality of two floating point numbers. Logically it would seem that if the "==" operator is not usable for floating point comparison, then the "<=" operator would also not be usable. Is this true? The lack of google search results on this topic made me think that it must be true. If that is true, then is it true that the only way to compare floats with <= or >= is with something like the code below? Code: bool smaller_than_or_equal(float a, float b) {
if ( fabs(a-b) < EPSILON){return true;}
else if (a < b) {return true;}
else {return false;}
} I think this is a general question, but if specifics are necessary, I am using the C++ language to code at the moment.
I don't really understand the CPU technology where there are different CPU speeds. I feel it is hard to compare them nowadays. For example, I have been using my laptop with Pentium (R) 2Ghz. Now, I am thinking about buying a new laptop with Intel I5 1.33GHz (Tablet/laptop). Is my new laptop going to be slower than my current one?
View 12 Replies View Relatedi have used many Hex Editors in windows, almost all had comparison features, even notepad++ to an extent could do this. I have 2 binary files, i just want to compare the differences easily and graphically, in windows HexWorkshop did this with the click of a button. I have tried 5-6 editors from the ubuntu repos but none have this option
2) Is there any desktop video capturing software that are more catered for tutorials etc where the whole desktop is captured. (Camtasia for windows i know it a massive bit of kit, but thats the sort of software im on about)
I have tried recordMyDesktop, XVidCap and a few others. However, they capture XServer and therefore things like desktop effects arent recorded. I have used VLCs screen capture which to be honest is better than the other 2 software i mentioned for recording the whole screen, but options are very limited.
my issue is that the when i put in the correct input its going into the loop like i put in incorrect input and wont break out of the loop even with the correct input entered
Code:
import java.util.*;
import javax.swing.*;
[code]...
I am looking for a free software that performs image comparison. I would prefer a non-GUI application as I need this to be automated. I am using Redhat Enterprise 3 and 4
View 1 Replies View RelatedHow to compare CPUs? Is there a trusted source that compares cpu performance?
View 4 Replies View Related
