I'm playing with OpenVPN and I'm trying to share my VM's internet connection with another VM. My server VM has internet access through a NAT interface on virtualbox. My client can even ssh to the server, so the openvpn tunnel must be working. I've tried on the server:
[Code]...
I have two firewalls, one primary (fw1) and one fall-back/backup (fw2). On the LAN side the fw's reside in the same LAN segment. I have a client who wants VPN redundancy. So I configured two VPN tunnels for this client. One via fw1 and a backup via fw2. Since the default gateway on the VPN server points to fw1 only the tunnel via fw1 is established. OpenVPN can't establish a tunnel via fw2 because of the gateway and just sits there waiting...
View 1 Replies View Relatedi have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
I need to know the procedure to setup VPN between two network. i setup openvpn access server to do this easy. 1. Step by step procedure to setup VPN 2. Setup VPN with DHCP 3. How to check that open vpn is running successfully.
View 1 Replies View RelatedI've been working with my OpenVPN server for a while, and I have a rather interesting problem. I need to redirect all client traffic through the tunnel except for a couple IP's that need to be resolvable locally. The way I'm doing this is pushing these routes from the server:
Server 'PUSH' directives
push "redirect-gateway def1 bypass-dhcp"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
I'm seeing that translating into these Windows routes:
Windows routes occurring
Wed Aug 31 15:14:35 2011 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,route 10.8.0.1,topology net30,ping 5,ping-restart 30,ifconfig 10.8.0.6 10.8.0.5'
Wed Aug 31 15:14:35 2011 ROUTE default_gateway=192.168.1.254
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 199.[*.*.*] MASK 255.255.255.255 192.168.1.254
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 0.0.0.0 MASK 128.0.0.0 10.8.0.5
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 128.0.0.0 MASK 128.0.0.0 10.8.0.5
Wed Aug 31 15:14:40 2011 C:WINDOWSsystem32
oute.exe ADD 10.8.0.1 MASK 255.255.255.255 10.8.0.5
I've hidden my server's IP beginning with 199 for security purposes.What I've gathered.I'm assuming that 0.0.0.0 is a kind of code for "everything," so I'm not sure how I could get this to work, but the general idea is that I need a specific IP range (172.16.*) to be resolvable on the LOCAL NETWORK (of the client) meaning it does not go through the VPN tunnel and the client can connect to 172.16.* locally.Is this possible? Routes can be executed through the command line, server "push" or client config options. Any way to get this to work while still routing other traffic through would do, really.
Additional Info: I have the server running on Debian 64-bit and the client running on Windows 7 (although Vista needs to work as well).Client/server configs can be provided if needed.
I'm using Debian Lenny and I want to tunnel rtorrent only through a OpenVPN tunnel. I have a tunnel running, the config file looks like this:
client
dev tun
proto udp
remote openvpn.xxx.com 1194
resolv-retry infinite
nobind
persist-key
persist-tun
[Code]...
My idea is that I could run a sockd proxy internally that redirects traffic to the openvpn tunnel. I could use the *nix "proxifier" application "tsocks" to make it possible for rtorrent to connect through that proxy (as rtorrent doesn't support proxies). I have trouble configuring sockd as my IP inside the VPN changes every time I connect. This is a config file someone said would help:[URl].. As my IP changes at each connect I don't know what to put in that config file. I have no control over the host side config file.
I have an Ubuntu VPS running 10.10 x86_64
This is what is in my /etc/network/interfaces right now.
Code:
auto eth0
iface eth0 inet static
address 67.202.x.x
gateway 67.202.x.1
netmask 255.255.255.0
auto lo
iface lo inet loopback
My server.conf
code....
I can get the VPN server running and everything connects fine from the client. I just don't know how to tunnel all the traffic through the VPS because it involves making the bridge which I'm having trouble with. What exactly am I supposed to put in /etc/network/interfaces?
I currently run openVPN on my Debian box that provides secure ipv4 routing from my laptop to my VPS in a different country (and from there the internet via this box). This works fine. However, id like to sort out ipv6 through this VPN as well as IPV4 and not overly sure how to do it. The remote server itself has native ipv6 configured on device eth0 and it works (ping6, traceroutes all fine,incoming to web servers etc) nicely on dual stack.
How would i go about modifying the config (both client and server if needed) to enable openVPN to act as a tunnel broker to enable the laptop to use the ipv6 through the server as well as the old v4? (the internet connection laptop end will not/does not have native ipv6 from the ISP. Currently im using he-net tunnel broker but id like to run myself through my existing openVPN). VPN config details: Its using UDP, port 1194, creates a TUN interface, redirect-gateway etc and the rest is normal config. Edit:- if it matters the clients are all running windows so i cant use sh scripts to set up stuff client end.
I'm trying to set up an openVPN server for a small office. I've gotten the server running, and configured keys, and been able to connect to the server. The trouble is that once I connect with my windows machine to the server, I am unable to bridge through to the www. I have combed through so many settings and tutorials, and I am confused as to how to set up the interfaces configuration file. Here's a sample of my routing table:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0
XXX.XXX.XXX.0 * 255.255.255.128 U 0 0 0 eth0
10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0
default XXX.XXX.XXX.1 0.0.0.0 UG 100 0 0 eth0
How should I be configuring this so that when I'm in the VPN I can get through to the internet?
I have some questions about openVPN. I am wanting to hide my downloading through transmission and I'd like to know if I can use openVPN for this? Also do I need access to a server? I don't understand how it all works.
View 5 Replies View RelatedHi, I have a server at my home which is a Ubuntu 9.1 which is setup as a NFS server using NFS v3. I am also using DYN DNS to access my home server remotely from another location using SSH. Everything works good, I can sucessfully log in to my server from my laptop via SSH, however my problem mounting my NFS share which consists of appx. 300 mp3 files. My question is:
1 How Do I Tunnel a NFS share through a SSH tunnel?
2 Is there any other configuration? needed to be done to the router?
3 is there anything needed to be configured to the server or my laptop?
4 Manual mounts is fine for me I don't care about automounting.
I just want to be able to mount the NFS share via the SSH Tunnel and play my music and access other files from my server.I just need the steps to set up this connection.
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
I have wired internet connection and want to share it over a secured wireless network ... when i tried to create a secured ad-hoc network .. system doesn't connect and creates a new network with the same name but unsecured one ... i have read somewhere this method ..
[code]....
But system doesn't connect to the new network i created ... created new ad-hoc network (unsecured)..and now everyone in my range is using this connection.
I have a computer on my LAN that I'm using as a file server for my photography work. What I'm wanting to do is allow my business partner be able to access the file server from his home over the internet. I'd also like to create a share folder on each of our computers so that we can each access and modify so we can sync our work easily without being in the same office.What would be the easiest way to do this and how exactly do you access another person's computer over the internet?
View 1 Replies View RelatedI'm trying to connect two PCs to the Internet (or at least to create a local network) using a crossover cable. My main PC (the one that has two ethernet adapters and is connected to the Internet) runs Windows 7 and my secondary PC runs Ubuntu 10.04.Unfortunately, it doesn't work. Both systems send out packages but don't receive anything. How can I possibly fix this, so that I could use LAN and share the Internet connection between PCs? Does Windows need special software to recognize Ubuntu (or the other way around)?
View 1 Replies View RelatedFor a very special project, many hardware issues, unusual limitations, etc, I'm turning my ubuntu into an access point (temporarily) by sharing the Internet from one device to another. I found out that with the devices I'm using, this can't be done with the network manager.
I need to get the internet from a device called 'tun0', to my 'wlan0', so it can broadcast it as a very special access point. I've read that there are ways to do this with the terminal.
I have Internet modem , and i want to share my internet to other , i mean other can connect to my internet from other computer ? with key security? , its possible? its possible from windows should linux do that too , but i dont know how .
View 9 Replies View Relatedis there any program which i could use to share my screen with my students on internet? i tried vnc and rdp i am using ubuntu 9.10 karmic
View 2 Replies View RelatedI am really bothered from this I cant configure the 2 nics to share the internet and I already changed the sysctl.conf file to
# Controls IP packet forwarding
net.ipv4.ip_forward = 1
I have one nic reeving the internet and working good and the other one cant see anything...
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedTrying to share my internet connection with other computers on my LAN. I've tried doing this with Debian, Ubuntu & Fedora so far...
My Intended Setup is as follows;
The Problem: So far I've not been able to get an internet connection from any computer connected to the HUB. I currenty have Fedora 13 on PC1 but have also tried with both Ubuntu 10.04 & Debian Lenny. I am open to using any Linux based distro on PC1 as long it has a Gnome Desktop. eth0 on PC1 can be Static or Dhcp, but I would prefer to set Static IPs on eth1 & all of the Client PCs
To the best of my knowledge I have enabled ipv4 forwarding in sysctl.conf (& some other changes);
Code:
All changes I made to the Firewall (all other Firewall settings are still at default, no custom rules added yet);
Router is set up to assign dhcp from 192.168.xxx.100 & 192.168.xxx.200
At the moment I have only 1 PC attached to the HUB. It's Ubuntu 10.04 (PC2)
It's details are;
ip 192.168.xxx.103
netmask255.255.255.0
gateway 192.168.xxx.101
Thus Far I can't ping 192.168.XXX.103 from PC1 & I can't ping 192.168.XXX.101 from PC2. (unreachable) I have an internet connection on PC1 (of course)
I have network manager applet 0.7. How to create a wireless network? I have an internet connection and I want to share it with other computers wirelessly.
View 2 Replies View RelatedI have a Droid Eris teathered over USB. I would like to share the the internet connection over WiFi. Currently, I forward tcp:8080 to tcp:8080 with the android tools. (I'm using the proxoid application.) Then I set firefox to use localhost:8080 as a proxy.How can I share this connection over WiFi?
View 1 Replies View Relatedi have two machines both on ubuntu 10.4 connected to a network via port switcher, 2 rj45 network cables auto eth0 is setup to share with other computers, i can ssh in and out of both, so the network is all running but i want to know how to share my single dongle internet connection between the 2 computers
View 4 Replies View RelatedMy computer running Ubuntu 10.04 (latest) is connected to the internet via an ethernet cable. I would like other devices to connect to the internet by sharing its connection via wifi. Is there a guide to do this? I haven't been able to find one which works out of the box.
View 2 Replies View RelatedI have two wireless cards on my pc. One connected to the Internet and one free. I would like to connect the free one to a adhoc network with my netbook to share my connection because my netbook cannot reach the other side of my home.
View 1 Replies View RelatedI want to share my internet connection with my netbook which has a Win 7 starter OS. This is what I did: in Network Connections I set the IPv4 Setting of my network card to shared with other computers, plugged in the network cable into both machines, and now they both see a connection. Win 7 only sees the connection as Unidentified network with "No internet access". What should I do?
View 3 Replies View RelatedI have an internet connection called 'tether0' in ifconfig.I also have a connection eth0 which is connected to a wireless router. I'd like to share the 'tether0' connection with the wireless router, so that wireless clients will access the internet through tether0.The guides I've seen don't seem to apply to my situation.how I should proceed? I'm not very experienced with networking,but understand most of the basic and intermediate terminology.
View 1 Replies View RelatedIn the documentation at [URL] it says
Quote:
Note: To clarify the above example here is an example configuration that will work - * 1. You are already connected to the internet using your wireless on port wlan0 * 2. The ethernet port eth0 is connected to the PC that needs to share your internet connection (or you could wire eth0 to a router for multiple machines)
I am trying to do precisely this, with my laptop aready connected to the internet via my HTC Hero on port usb0, and the router needing to share the connection plugged into the laptop's port eth0. Port eth0 is set to "Shared" as the doc describes.
The router in question is an old WiFlyer pocket AP, which has a fixed and unchangeable IP address on its wired port of 192.168.7.77. What happens is that when I plug it into the laptop's eth0, NetworkManager pops up the "eth0 Connected" message...and then "Disconnected"...and then "Connected"...and then "Disconnected"...etc.
I want to be able to share my cellphone's Internet connection through the laptop and out into the WiFlyer so that others can get a wireless connection in a location that has no other form of connectivity.
[Rooting the Hero and making it an AP won't work: it can't run Froyo and it can't broadcast wireless.]
I thought this will be as simple as in Windows 7 (connectify+virtual router). But it's not. So far I've managed to install a driver for an usb wifi dongle and now Ubuntu sees it
Code:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 unassociated Nickname:"<WIFI@REALTEK>"
[Code].....
Could it be that the wifi interface is down or something?
PS. when I left click on network manger, I see that under wireless networks it's written "disconnected".