General :: Dhclient Retry Working - Background Process
May 30, 2011How the dhclient retry working(Background Process).
View 3 Replies
ADVERTISEMENT
General :: Run Two Background Process?
Oct 26, 2010i have ported linux into arm and i want to run two background process on target
i have two c programs a.c and b.c
i have cross compiled them as
arm-linux-gcc -o a a.c
[code]...
General :: Run A Process In The Background?
Nov 16, 2010Could you tell me how can I run a process in the background?
View 1 Replies View RelatedGeneral :: Pull Process / Job Into Background
Jan 17, 2011I know of terminating a command with & and then moving it into the background by pressing Ctrl-Z and then bg [pid], and I also know of nohup. But say you started a process that turned out to take much longer than one expected, is there a way of pulling, so to speak, this process from another terminal screen into the background so that even if I log off from the server the process would continue?
View 2 Replies View RelatedGeneral :: Nohup Does Not Run Process In Background
Apr 11, 2011I run
nohup bash -c "while [ true ]; do echo test; done"
from PuTTy SSH client but after this process is not runned in background instead nohup keeps to be foreground process in shell.
SW version: nohup (GNU coreutils) 8.5
General :: Moving A Process To Background Using PID?
Mar 5, 2011i want to send a running process to background .. normal commands like sleep i can able to move easily to bg .
# sleep 10
#Ctrl+z
#bg
[code]...
General :: Way To See Only Process Running In Background?
Feb 23, 2011Is there some way to see only the process running in the background?
View 4 Replies View RelatedGeneral :: Running Process In Background
Jan 14, 2011Is there any way to run a long process in background so that it still remain in running state even if the user logout the system.
View 12 Replies View RelatedGeneral :: Move Running Process To Background
Mar 10, 2011How do you move a running process to the background? For example, type the command sleep 60 on the command line and try moving that process to the background.
View 1 Replies View RelatedGeneral :: Process In Background Hogs 96% CPU But When Ran In Foreground Its Almost Zero
May 17, 2010I am trying to solve one problem: When i run my process in background it hogs around 96% of CPU. But when ran in foreground, CPU utilization is almost zero. Is there any difference b/n a background and a foreground process wrto CPU utilization?
View 8 Replies View RelatedGeneral :: Sending Remote Command To Background Process + Out Log?
Feb 1, 2010Because of my English skills I'll try to explain this subject as best I can, thank you for understanding. Fisrt of all, I am running some program on my slackware in background (using standard method - &). I need to make a script, which allows sending command to this process on my machine from another one. Furthermore this program have to be logged out (standard output f.e. ./myprogram > log.out.txt).It might be a separate Program A which runs my Program B but it cannot be screen, because it is not working like I'd like to and it cannot be java, because it's slow and working not the best so to speak
View 6 Replies View RelatedGeneral :: Background Process Execution Hangs Console And Ip Communication?
Feb 9, 2011I have 3 processes to be executed in a particular sequence.
ProcessA
ProcessB
ProcessC
The requirement is that all the processes should run as background processes.
ProcessA talks to ProcessB and ProcessC using sockets.
ProcessB talsk to ProcessA only using sockets.
ProcessC talsk to ProcessA only using sockets.
[Code].....
General :: Running Program In Background In Child Emulator Process
Aug 26, 2009I wonder how one can, if at all, run an X program in the background *in an emulator sub-shell process*. What I mean is to launch a program in an emulator, e.g, by xterm -e gedit
but with gedit (in this example) running in the background from inside the xterm sub-process, so that the xterm will accept other commands. In the above, gedit will run in the foreground, and of course, if you do
xterm -e gedit &
then xterm will run in the background, not gedit.In short, I would like to achieve the same thing as "gedit &" as you manually do in xterm, but from another shell. What I aim to do is write an X init script to achieve this result (to have the emulator open and a program or two running from it, in the background, at the X startup).
General :: Function Having Background Process Inside Command Substitution
Oct 5, 2010The first call to "somefunction" works as expected. The function prints "endfunction" and a process in background sleeps 30 seconds. In the second call I thought it should work in the same way, but the script sleeps 30 seconds before it prints "endfunction".Does someone know the reason of this behavior? Is there another way to do a command substitution of a function that has a background process without have to waiting for that process?
View 2 Replies View RelatedDebian Configuration :: USB Gigabit Ethernet Dongles Not Working With Dhclient
Sep 12, 2015My laptop only has a 100Mbit ethernet port, so I bought two external USB gigabit ethernet dongles in the hope of getting faster ethernet speeds. I have never had trouble with Linux supporting ethernet before, but neither of these devices are working. One is an ASIX AX88179 (by TrendNet) and the other is a Realtek RT8153 (by Anker). When I plug these devices in, I get network devices called enx00e04ca82300 or enxd8eb97b61e4d (instead of eth0/eth1 as I would expect).
I can manually set an IP address with "ifconfig enx00e04ca82300 x.x.x.x up" and manually add a route and my network connection works at gigabit speeds. However, the long enx... network device name does not appear to be valid in some sense: tools like dhclient or iptraf or network-manager fail with messages like "no such device" (well, network-manager just hangs). I don't know if it's because the name is so long or because they are not fully registered inside the kernel.
I have vmware workstation installed, and it does some strange things with network devices (setting up bridges for everything). I have disabled its services and see the same behaviour. This looks like a kernel bug to me but it's possible it is a vmware issue. vmware works fine with my wireless and 100Mbit ethernet (eth0 and wlan0).
Realtek device
Some dmesg for the Realtek device:
Code: Select all[10264.619420] usb 4-3.1.1: reset SuperSpeed USB device number 4 using xhci_hcd
[10264.634651] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4221a00
[10264.634653] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4221a48
[10264.634655] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c4221a90
[10264.647842] r8152 4-3.1.1:1.0 eth0: v1.06.0 (2014/03/03)
[10264.647902] usbcore: registered new interface driver r8152
[10271.452198] IPv6: ADDRCONF(NETDEV_UP): enx00e04ca82300: link is not ready
[10275.094334] IPv6: ADDRCONF(NETDEV_CHANGE): enx00e04ca82300: link becomes ready
The Realtek device often crashes after just a few gigabytes have been transferred, with dmesg like this:
Code: Select all[10485.761603] net_ratelimit: 10 callbacks suppressed
[10485.761618] r8152 4-3.1.1:1.0 enx00e04ca82300: Tx status -71
[10488.694340] r8152 4-3.1.1:1.0 enx00e04ca82300: Tx status -71
[10488.711352] r8152 4-3.1.1:1.0 enx00e04ca82300: Tx status -71
[code]...
I have not investigated the ASIX device as much. However, my original 100Mbit ethernet has an ASIX chipset (AX88772) and that works perfectly. I have not observed the ASIX device crashing yet so I am using that for now (haven't used it for long yet though). But as before the device name appears to be invalid and I cannot run tools like dhclient. why two gigabit adapters with completely different chipsets would show up with long device names and support low-level stuff like ARP, ping, and static IPs, but fail with dhclient & network-manager? And the Realtek device seems to like crashing too.
General :: Manually Forcing TCP Connection To Retry ?
Jun 9, 2010I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues.
The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again.
How to force all TCP connections to resend data without delays in GNU/Linux?
General :: Create A New Background Process In A KSH "while Read" Loop?
Jun 20, 2010When I add the line (sleep 5 ) & in the script then the "while read" loop does not read all lines from the file, but only prints the first line.But when I remove the ( sleep 5 ) & from the script, then the script prints all lines as defined in the file.And how to solve the problem? I want to create a new process (for which the sleep is just an example) in the while loop:
$ more test
#!/bin/ksh
while read -r line ; do
[code]....
General :: Mailbox Is Full: Retry Timeout Exceeded?
Feb 10, 2010I get the following error if i try and send to my mailserver. I'm running SuSe 11 with sendmail and dovecot. I can send emails no problem. I have looked around and looks like it's not my diskspace on the machine i don't have any quota's on mailboxes.
View 1 Replies View RelatedNetworking :: Process A Job In Background?
Feb 16, 2010How can I run a job in background using putty? I'm try to run yum update but it will take some time. if I close putty the process will interrupt.
View 14 Replies View RelatedSoftware :: Background Process Hangs?
Feb 10, 2011I have a process A running in the background. When I start another process B also in the background, the system hangs the moment I hit any key. Process A and B communicate over a socket. Iam not even able to do a telnet to the system. Is there any precautions that I need to take while running in background
View 1 Replies View RelatedCentOS 5 :: Sending Process To Background?
Apr 30, 2011It's my first post and think not last here. I'm new to Linux system ( had a bit of unix programming at school but forgot already ). Please, take a good care of nooby me Now, let's get to the point
I have CentOS installed on one of my machnce, its my PHP development server. I also wanted to run a Minecraft server on it. I would like to skip autostart with init.d thing and be able to control it's run manually, but remotely. Thing is, when i log via putty to server and start server the server output is in terminal. When I close puty, ran application closes also. So I need to have putty window ran all the time.
So, since many programs can be run as background task (like httpd). Is there a way to log via putty. Start application and send it to process... log out of putty ( and application doesn't shut down with putty)?
Also, would be nice if I was possible to log to putty and switch to that application, so i could see server output, info and Issue commands. Basically, I want to start a service and be able to manage it via putty. and not close it when i terminate putty.
PS: I have installed Windows on CentOS server. Is there a way to issue a system start without loading whole GUI thing? When I was installing it I thought it would be easier to manage it with GUI, but now loading it only eats system resources and i unplugged monitor and mouse nad manage it only from Putty
Ubuntu :: Run A Java Process In The Background Of A Terminal ?
Feb 16, 2011I am running Ubuntu 10.10, and I am trying to run a java process in the background of a terminal, so I can continue to use that terminal.
Other applications will run in the background just fine, but when I run my java application, I cannot change the status of the process from "Stopped" after suspending it.
Here is my command syntax, along with some commands I have tried and their outputs:
There were [1]- entries, but I removed them for simplicity.
Programming :: Process Does Not Write To Disk While On Background
May 18, 2011I am doing a program that reads data from a gps and some other devices and writes some files with all the information. When I run it normally it works fine, but if I run the program in the background (with the ampersand) files are not created until I bring it to foreground or close it. I am confused, the program should run the same way with and without the ampersand. (Could it be that the main process that creates all the threads does not create them when it is executed in background? It seems like if the program is stopped until I take it to the foreground).
View 4 Replies View RelatedServer :: Move Background Process To Foreground?
Mar 5, 2010is it possible in bash to run one command in background and after it's done show output with less? While background process is running I should be able enter another commands.What I have is this (sleep is only for simulation):
Code:
{({ ( tree / > tree.txt && sleep 2) & } && wait && less tree.txt) &} && wait fg &
Problem is that I don't know and I can't find how to move it to the foreground after completion.
Programming :: Gracefully Exit A Background Process?
Jun 7, 2011I am using a program that reads in data from a serial port and then sends that data out over a TCP connection. The problem I'm having is that the only way I know to exit the program is to do a 'kill PID', but doing this means the program doesn't go through the motions of closing the TCP connection properly so I have to wait some random period of time for the port to free itself or else when I try to start it back up it tells me that it can't bind to the specified port.The general structure of the program is as follows
Code:
int main(){
// initialize some stuff
[code]...
Ubuntu :: Cron Leaves Defunct Process When Job Goes Background?
Apr 23, 2011I'm using cron to run a tunnel. It is a looped script which never exits, and thats why I don't want cron to wait for it. This is a crontab entry:@reboot $HOME/cron/portfw.sh &When I run it manually, everything is ok. But when cron runs it, a defunct sh process keeps running until portfw.sh and it's child are killed. Somehow cron knows that processes spawned in background and keeps waiting for them and ignoring the fact that parent process exited. I tried using setsid to change spawned process group, but it did not full cron, it still knows about child processes
View 9 Replies View RelatedProgramming :: Scripting, Perl Or Bash; Run A Background Process, Get Pid?
Apr 1, 2010pretty simple. how would you background a process from a script and get its process id at the same time?
View 6 Replies View RelatedUbuntu :: Place A Process In The Background, Bring To Foreground?
May 18, 2011q)how can i bring the backgroud process to foreground i tried like below1]hp-linux@hp-linux-desktop:/usr/share$ top
top - 11:28:24 up 1:57, 2 users, load average: 0.55, 0.65, 0.62
Tasks: 158 total, 3 running, 155 sleeping, 0 stopped, 0 zombie
Cpu(s): 6.1%us, 2.9%sy, 0.7%ni, 87.1%id, 3.0%wa, 0.2%hi, 0.1%si, 0.0%st
[code]...
General :: Dhclient Overwriting Resolv.conf?
May 30, 2011I'm setting up virtual dev environments and I want the hostname.domain to be something specific, eg- "barney.local". However my /etc/resolv.conf file keeps getting nuked because i'm using DHCP. I placed this into my dhclient.conf:
supersede domain-name "localhost"
supersede host-name "barney"
but it didn't help. I'm not sure where I'm going wrong. How can I still use DHCP but configure that virtual environment to see itself as barney.local?
General :: Make Dhclient Start At Boot In Opensuse 11.0?
Jun 15, 2009I looked into the handbook,googled for it,but found no working solution to this "problem". Everytime I use Opensuse I must su and then type dhclient,how can I make sure my connection will be up as soon as I log in?
View 7 Replies View Related