I installed FC 12, 64 bit yesterday. I downloaded open office and unpacked it. I then issued the command rpm -Uvh *.rpm this fails due to many dependencies Some of these are:
[Code]...
how to "link" or make these and presumably other libraries searchable.
I'm running FC11 on an Intel 686 server and would like to solicit some help. I'm writing an Expect script to discover our lab network and would like to insert the results into a mySQL database. I've installed Apache/PHP/mySQL via the LAMPP distribution. I've hit a brick wall, however, in trying to install the mysqltcl library. how to install the library. I have downloaded an RPM, but installatiojn is failing due to missing dependencies: libmysqlclient.so.10 and libmysqlclient_r.so.10. And I have no luck in locating and installing those.
View 1 Replies View RelatedI'm currently running Fedora 13 and updated the system in the morning with the help of 'yumex'. It complained about a couple of unresolved dependencies regarding new kernel and kmod-nvidia, so I manually skipped these packages for now (this happened before some time ago and worked then a couple of days later). I installed all other packages like firefox, thunderbird, kde, gnome pidgin etc. though.
I think I remember also to have seen some X11 stuff, but aren't quite sure (not updating often, so always getting quite a number of packages at once). The problem is that the system doesn't start any longer. The start screen shows the blue progress bar, then flickers and the system halts. I tried to start any of the last two older kernels but with the same result. When running in verbose mode I can see the following:
...
Checking for module nvidia.ko: [OK]
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1033 Segmentation fault "$@"
[FAILED]
...
There are a couple of more successful steps afterwards, but the system will never start. I tried a different runlevel by appending 'init 2' to the startup line, but wasn't able to login with any of my users. In despair I tried the link 'Updating to Fedora 13' from the boot menu, but it isn't actually offering an upgrade, but a complete re-install instead.
How to make simple games (snake, pong... nothing too fancy). I have completed making snake and now want to be able to distribute it. I built it using C++ and wxWidgets so it would be multi-platform. I'm able to compile it and run it in both Windows and Ubuntu using g++. In windows, I was able to distribute it by putting a *.dll file in the same folder as the executable. However in Linux, I don't understand what I need to do so that it would run on any installation of Ubuntu out of the "box". When I build it and try to run it in a different installation of Ubuntu (which has g++) it gives me an error saying that a particular library file was not found and Getlibs fails to find that library file.
Is there a way to build a project with G++ so that all the dependencies are either packaged in the executables or copied into the folder....?
I can't find a Yum command to clean up no longer needed dependencies, you know similar to apt-get autoremove. Or does yum do this with the erase or remove command? btw: yum-clean-all just flushes out the cache right?
View 2 Replies View RelatedI have downloaded PGF for latex in my home directory.[URL]..How can I configure latex to access to the library in my home?
View 3 Replies View RelatedI'm looking for a package that will allow me to keep all my bookmarks in a library that I can access from any browser that I use such as FireFox, Chrome etc.
View 3 Replies View RelatedI need to get the libstdc++.so.5 library ( on a computer with Fedora 8 and don't wonder why it's so ancient,-there is a good reason for it) but I don't have Internet access from that computer, so I can't get to the online repo's.
However, I do still have the installation disk, and I'm typing this from a computer (SuSE 10) that is half a meter from the Fedora box.
I tried the "ADD/REMOVE Software" option on the menu, but it keeps on looking for the online repo and then if it doesn't get it, it fails.
Is it possible to get this library from the installation disk. How? Could I download the single package from the online repo onto the SuSE machine and then move it to the Fedora machine? How do I then tell the Fedora machine to "incorporate" it.
I'm trying to install a package which is failing these dependencies:
[code]...
I downloaded Gnome2-GConf-1.044.tar.gz and I installed it, but I still the package fails the dependencies, even Gnome2::Gconf. What I can do?
My girlfriend has just dusted off her Aspire One netbook with Linpus on it. I've tried to update packages and such (eventually got the password changed and such) now I can't update the packages or enable GNOME.
Updating the packages brings up this error:
Code:
And trying to switch to GNOME brings up this error:
Code:
Using 64bit current, I noticed that usbimg2disk.sh fails on dependencies check. It searches for mbr.bin in:
Code:
/usr/lib/syslinux/
but that portion of package now seams to be in:
[code]...
Update to 5.3 went OK a few days ago.Today there is updated kernel packages available but it fails dependencies on ecryptfs-utils.
View 3 Replies View RelatedI've been trying all morning to update from a working 9.10 to 10.04 and unfortunately every time I try it blocks me.
An unresolvable problem occurred while calculating the upgrade: E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
Restoring original system state
I've uploaded the full apt log to pastebin here:
[URL]
I'm running Banshee 1.6.1 on an AMD64 machine and I am having problems re-scanning my library. Every time I select Tools -> Rescan Music Library (even after making substantial changes to my library) the status bar disappears after a few seconds. Has anyone else witnessed this phenomena before? I can re-import my library to update the banshee database, but it would nice if this feature functioned properly.
View 4 Replies View RelatedI originally uninstalled KMail but now i would like to try it out again and get more familiar with it.
Problem is, since i upgraded to KDE 4.5 i can't.
There is always some dependencies issue. code...
I'm trying to install gazebo but I would like the general solution. When I type "./configure" I get the error: "could not find gdal_priv.h" or sometimes "could not find gdal library" But I have it on my computer. It is: usr/include/gdal/gdal_priv.h This means configure is not looking in the right place for this library. Where is the path stored, please? I tried reading the configure file but I could not find it. I tried to replace all instances of gdal_priv.h by gdal/gdal_priv.h but this did not work either. I tried adding /usr/include/gdal to all the env PATH_something_or_other I could see. how to tell to ./configure where to look for libraries. What file(s) should I edit? (I tried config.status, because it contains /usr/include stuff). The files I have are:
[code]...
This is the error I receive when I try to install a library. I really do not know If I could do something to skip this error message.As you might see below. I receive the following error message Error in dyn.load(file, DLLpath = DLLpath, ...):unable to load shared library '/home/apa/R/x86_64-unknown-linux-gnu-library2.11/RandomFields/libs/RandomFields.so': /usr/lib64/R/lib/libRlapack.so: undefined symbol: _gfortran_concat_string
This is the full error log
Bash | [CODE]* installing *source* - Anonymous - d4DH09Wx - Pastebin.com
I have a msi cr610 laptop. I installed fedora 13 and tried to access internet but fails. I have wireless internet in my apartment (WAP& WEP). Can I buy a separate usb wireless adapter and plug in. Will it work? Will fedora detect wireless points?
View 3 Replies View RelatedI have installed Ubuntu 10.10 and I need to run an old Mathematical SW called ADIFOR 3.0. My problem is that this SW is giving problems because has dependencies with the library ""libstdc++-libc6.1-1.so.2". I followed a million of possible ways to fix this problem...but no one works properly. What can I do? I have been 3 days trying to fix this problem and I do not know what I can do.
Alberto Jorr�n Rodr�guez
Departamento de Ingenieria de Sistemas y Automatica
Dpt. of Systems Engineering and Automatic Control
Universidad de Valladolid / University of Valladolid
Address: Facultad de Ciencias, c/ Real de Burgos s/n
47011 Valladolid, Spain
Tel: +34 647 670 581, Fax: +34 983 423161
it possible to access main program function from dynamicallyinked library in c language?For example:main.c:
Code:
#include<stdio.h>
void func()
[code]...
I have written a script that must be run as root, but at one point in the script there is some library configuration which should not be run as root. So my question, is there a command that runs another command as not root when root? (If that makes any sense..)
View 8 Replies View Relatedas I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
i recently did some changes to my hard disk partitonand now linux is in hd0,6when i booted my pc,i got the grub commmand line interfaceso,I think that i need to edit grub.conf in fedora 14then at cmd i did this:
grub> root (hd0,6)
grub> kernel (hd0,6)/vmlinuz
file not found
[code]....
I 've been trying apt-get command to down load some library files regarding graphics It is not working properly
View 1 Replies View Relatedwith that said i burned fedora 8, 10, and 11 checked the sha1 verified everything was fine i had originally installed fedora 8 on an old pc i had from windows XP without any problems messed with it some, upgraded to 10 again no problems. tired to update 11 got a message about ext3 not found ext4 not found, re installed 10 the loader loads up now i have a blank screen with a cursor it the left hand corner
again i had 10 installed fine prior to all this can any one point me in the right direction to solve this issue or am i way over my head trying to figure this stuff out. i have spent 3 days searching these forums.
i'm just not quite sure what i need to do. oh, i tried to install 8 again and it wouldn't take either. i think the 10 problem has something to do with the graphic driver it's a geforce 7400 nvidia and something to do with the grub, but like i said i get a blinking cursor and not quite sure how to access the grub or command line.
I updated quite a lot - kernel, selinux policies, initscripts, glibc and a lot more - and after reboot one filesystem does not mount. It says:Command failed: Can not access device... and asks for password. This is: RAID -> LVM (mirrored) -> LUKS -> ext3. Similar filesystem (raid->lvm(not mirrored)->luks->ext3) mounts fine. Mounting the problematic system by hand works fine. During boot, the lvm blockdev is named by UUID in crypttab, and the name used in fstab.
Of course I removed it from fstab to boot now. I tried downgrading initscripts so far, will try others. What I also noticed is that the emergency shell (bash) complains about something, I'd need to write it down next time I reboot; also "lvs" fails when / is ro, but maybe that's normal, dunno.Googling for the error message brought something about cryptsetup, but I didn't upgrade it (there is no upgrade available), and all I gather from it is that the error message might really mean something else, like device is already mapped.
It is probably something related to lvm mirrors, maybe also to luks, though the only related package in the list is the kernel, maybe the module-init-tools. SELinux seems not to be the cause, booting with permissive has the same problem. What I wrote above, leads me to thinking that luks is trying to set up lvm mirrors in parallel as they have the same uuid, but a) later during boot the mapping name is not there b) I have no idea what reads crypttab
I've PHP5 installed on my server, and just recently I installed a new application that requires gd library.
understand that I can have gd library installed via apt-get install php5-gd command.
Question: do I need to remove php5 instance (which was installed together with apache2/mysql using tasksel command) prior to installing php5-gd?
I am able to build a shared library under solaris with
/usr/local/bin/g++ -G -o output.so file1.o file2.o file3.o.
How do I build the shared library under linux using the same files?
I have tried to use the same command /usr/local/bin/g++ -g -o but I got some undefined references, even if those references are defined in one of the object files.
my fedora 14 did an automatic update tonight and on reboot it hangs displaying the "f" before the login in menu. The "f" is how I now feel.I do "fn+f2" as it is booting and it displays the sequence of loading items which report all is "ok" until it gets to "jexec services" and then it hangs.I do not know how to access the machine in command line mode and I am not sure what to do from here. I beleive the "jexec service" is a Sun Java item but I am not sure.
View 2 Replies View Related./configure script fails to configure libsf. Please check the following last few lines of configure script error.
But find command shows the following;
It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.