Networking :: Can't Acces A Particular Website / Way To Do
Nov 29, 2010
I have met following problem: there is a website I cannot access.
When I am trying to connect to this site I get an error message. I tried all browsers installed on my system. Seamonkey, Firefox, Konqueror. All failed. I don't understand this completely as I have no problem with connecting to internet. Now I am thinking that I myself somehow unintentionally blocked an access to this particular site. Is it possible? Under W$ I have no problems at all.
View 12 Replies
ADVERTISEMENT
Aug 15, 2010
====== Wireless Access Point & IP Forwarding Mini-Howto ======Use case: we have a pc (laptop, for that matter) with UBUNTU 10.04, and with wired connection to the internet. We want to connect iPod/iPhone or any other device to this laptop, and browse the internet, effectivelly turning our pc/laptop to a WI-FI access point. At this stage, we would not implement any encryption, so our network would be open to anyone.
Oour pc/laptop have 2 working interfaces, wlan0 and eth0. Device eth0 is the wired connection to the internet, device wlan0 is going to be set up as the wireless access point for the iPod/iPhone or similar gadget. We want to forward any IP traffic attached to wlan0 through to eth0. Interface eth0 can either obtain the IP addres from DHCP server on the router, or it can be fixed, it does not matter. But we definitelly need to set fixed IP address to wlan0, and configure dhcp server to listen on this interface.
===== Things to do =====
configure iptables to forward the traffic from wlan0 to eth0
setup wlan0 in /etc/network/interfaces
[code]....
View 6 Replies
View Related
Jan 13, 2010
I am using centos 5.3 , and also using webserver in local network
Here is all configuration
1, server
eth0 , 222.80.1.90 this is live ip
eth1 10.0.0.1
2, webserver
eth0 10.0.0.2
I want set iptables on server 1 , to acces webserver from other city ,
How to configure iptables
View 2 Replies
View Related
Aug 16, 2011
Maybe the most stupid question you guys ever heard, but i do not find the solution.Now that i have acces on the netbook i would like to share a folder on my desktopcomputer so i can acces it with the netbook when im in the bedroom.(moviefolder)But how do i share a folder in Fedora 15?
Username and password are the same on desktopcomputer and netbook.
desktop computer is named koen-pc
netbook is named koen-net
View 7 Replies
View Related
Apr 18, 2010
I open Firefox, Some Website Works, on some other Website Firefox Says "Connecting to...",but all the Sites I have Tested working on my Windows 7.
View 3 Replies
View Related
Feb 24, 2010
I've just installed Ubuntu 9.1 amd64 and I have a problem with acces to some web pages (i.e amd.com, adobe.com). I looks like bowser load a page but then stopping it last infinitely. I have Ubuntu 9.1 x64Atheros wireless adapter connected to ZyXEL access point.Parallel Windows machine which connected to te same router has no prblem with access to those sites. I tried different browsers, different setting of DNSeven set up different versions of 9.1 (x64, x86)
View 2 Replies
View Related
Mar 9, 2011
I have a Debian Lenny server with Bind9 (slave) Shorewall and OpenVPN on it. I also have a Win 7 client at my disposal to test the OpenVPN connection.I can make a connection with my Win 7 but when i'm connected i can only ping myself and the server's OpenVPN NIC (TUN0). The Debian server has 3 NICS. One for the servers, one for the internet and one for the clients.
View 1 Replies
View Related
Jun 3, 2011
i have downloaded some series into my download folder. apparently i did that as root (cant remember how but ok)now i want to delete some of the folders, but i dont have acces. i tried everything. deleting it while as root, using the command line : " sudo rm -R <folder> was the closest i got and i actually succesfully removed one folder. now the problem is that it was a folder named usr, one word. but when i try to delete a folder with more words, its trying to delete all those words seperatly, like ecery word is a different folder.
View 3 Replies
View Related
Nov 14, 2010
I have been an Ubuntu user for years and am new top OpenSuse 11.3. In Ubuntu I was used to be able to mount and have read/write acces to my Windows partition. My question is: Is this possible in OpenSuse?
View 9 Replies
View Related
Apr 22, 2010
I just installed a game, TripleA, that is supposed to run great on Ubuntu using JAVA. I extracted the game to the recommended folder.I have JRE already installed via Install and Remove Applications utility. Is there something else I should do? Installing JRE manually seemed a bit troublesome.Is it "safe", i.e. will the other apps that use java still work properly?
View 1 Replies
View Related
Nov 2, 2010
I try to set up a Ubuntu server that links 4 PC/Mac machines. How can I modify a folder property so that my linked PC can access (Create and delete) while the Mac can't or the other way around? Now, I have created a folder from Ubuntu, It lets all or none linked computers to have the same right.
View 9 Replies
View Related
Feb 18, 2011
I made a "test" server recently, put a samba + apache + vsftp server on it. The first 2 work but the VSFTP server is troubling me. On my lan it works. but on a wan: My ISP blocks port 21 so I changed it to 2200, my friend tried to connect earlier (With "ftp://myip:2200") and he had to type in a name and password, he did that (I made him an account)he got 425 failed to establish connection. Now I Re-installed vsftpd again, did the exact same thing and now it just wouldn't connect. saying the webpage can't be found. Question 1: What should I do to let a user acces from outside of my LAN? I think it's because of passive mode: but I have no idea what ports I should open for passive mode? My ftp port is 2200.
FileZilla tells me.
Entering passive mode
Command: List
And than that it can't find directory's
View 9 Replies
View Related
Mar 5, 2011
only getting with Yahoo mail, gmail is fine, also I get the same problem with chrome and with firefoxI can log in to yahoo both classic and "all new mail", but sometimes emails just doesn't load up at all (I get a blue loading bar but nothing happens), sometimes the mail will load, but I can't get attachments or send email at all. When I try to get an attachment it scans for viruses and just hangs, if I try to compose a message I also get a timer but that hangs too.
View 1 Replies
View Related
May 29, 2011
i'm trying to run some code i had written a couple of weeks ago in windows :$, the program has to create and copy some files and when i try to run this code in monodevelop this error:Unhandled Exception: System.UnauthorizedAccessException:Access to the path '/tmp' is denied.i've tried to change the path where i know i have read/write permissions but it doesn't seem to work, the code was originally written to create a file in the Temp folder in windows.
View 1 Replies
View Related
Dec 26, 2010
when booting I can only acces a broken GRUB and this is how I might have done it wrong. I installed Ubuntu the first time using dual-booting which I think is the worst way since it could be done better by using a Virtual Machine such as Parralels or VMware. Well later I noticed that after removing Ubuntu there was still 2 problems 1.when selecting a OS during startup When I select "Windows" it goes to a broken GRUB which displays something like this " Use tab to complete the first commands" GRUB><where you're suppose to type> and I can't type so I hard reboot it. 2. I could not get rid of LinuxSwap. Much later I removed LinuxSwap by booting in a Ubuntu live disk and then removing the partition as well as the Linux "/" and after booting to Mac OS X leopard disk0s1 the Mac OS X system partition was mounted which was bad since it was suppose to be invisible to even the root user unless viewed by terminal on any user.
Now later I reformatted it as "Mac OS X something extended" and at first it was unjointed and impossible to mount and after I reformatted it it appeared as disk0s3. Now the problem appeared.This is the stuff I can do1. I can type some commands in the GRUB but when I typed find / the output is something like can't find /2. I might be able to boot up a live disk however my Linux Ubuntu live disk is broken.3. this is my dad's second hand Mac G5 iSight, not mine and it was a bargain, it was cheaper than my iPad with Mac OS X Leopard 10.5#
View 9 Replies
View Related
Mar 30, 2010
Here is my config so far :
1. I installed Windows server 2008, with Active Directory, DNS, DHCP.
2. I installed Ubuntu 9.10 and joined it to the domain. Everything is ok. I can see the Ubuntu in the active directory, it gets an Ip address from the DHCP.
3. I create a shared folder on the server 2008.
4. I can access the server from Ubuntu ONLY by going to "Connect to Server" and entering the data to connect.
My problem :I would like to have the shared folder showing up when Ubuntu boots up or when the user is logging IN on the Ubuntu host. I have tried many things without success. I know how to do it so this is fine. BUT i would like a user to be able to access the shared folder without having to do anything (especially for users who are not familiar with computers). What is the best way to do it ?
View 1 Replies
View Related
Nov 22, 2010
Not sure if this is the correct forum for this but I run ubuntu 10.04 server in virtualbox, and have samba running. I can see the files and read them in win7, but I want write access aswell!
I need to do this in terminal only, and Im not that well versed in Linux or the terminal. Anyways here is my smb.conf:
[global]
security = share
workgroup = myworkgroupname
load printers = no
[Code]...
Since "read only = no" I think i should have write permissions... and since I can read the files Im guessing the smb.conf is the problem?
View 3 Replies
View Related
Jan 17, 2010
I have 2 web server in my office : http and https. You will find attached the httpd.conf and ssl.conf. I can acces the https server from home, but not the http one.
What I did :
configure the router to forward port 80 to my fedora 11 machine
open port 80 with system-config-network
created a virtualhost
The same exact steps have been done for port 443
I can access both server locally but only the https server remotelly.
Here are my iptables :
Code:
you can try to acces my servers using [url]
I made httpd to listen to port 8080, and done all the port forwarding/opening stuf, and it works. so is it a bug ?
Finally found my error seams like turning off UseCanonicalName to off did the trick
I really think it's a bug now. It was definitively working last week, I just added content to the main host of my website, and now i can't acces it from port 80. If someone think it's not a bug or find someting missing/wrong in my conf file.
View 2 Replies
View Related
May 20, 2010
bonjour;
voici mon probleme, j un serveur ftp sous redhat, comment faire pour creer les utilisateurs, (mais pas des utilisateurs locaux), c-a-d, les utilisateurs peuvent acceder au serveur ftp distant partir du client ftp (dans une autre machine), par mot de passe et identifiant.
merci de me donner la rponse si c possible dtaille.
merci beaucoup.
View 2 Replies
View Related
Aug 9, 2010
How would I set up a website that would be only accessible locally. There's a router machine (server) that keeps provides internet access for a number of client machines. I need to set up a learning platform (moodle) locally. The server machine runs moodle server (apache server) and students should have access to their accounts locally (no need to be accessible outside of LAN). First of all, what would be the best network configuration for it.Sorry for a dumb question, but could I just come up with any domain name if everything stays locally within LAN?
View 4 Replies
View Related
May 12, 2011
I have ubuntu 10.10 server with a web site I am mess up in NIC configuration. I have only one web site on my server. I Have 2 Internet connection with static IP. I have 2 Network Card as follow eth0 119.155.152.140 (1st internet with static IP without firewall) eth1 203.135.30.240 (2nd internet with static IP without firewall) when i restart my networking it give me following error
Code:
shah@server:~$ sudo /etc/init.d/networking restart
[sudo] password for shah:
* Reconfiguring network interfaces...
[code]....
View 2 Replies
View Related
Apr 11, 2011
I am trying to create a shell script (CGI) which will create a website with an embedded flash mp3 player. At the same time I want this script to overwrite the file currently in the playlist with another file which will allow me to change the song currently playing on the flash player. The reason I am doing this is so that I can copy the song I want to play to this file at a low bitrate reducing its size. The code I am using in my script is:
#!/bin/sh
echo "Content-type: text/html"
echo ""
echo "<html>"
echo "<object type="application/x-shockwave-flash" allowscriptaccess="always"
[Code]....
When I run the script the new page does not have the flash player and the song did not change.
View 6 Replies
View Related
Mar 16, 2010
I have several web servers, say myserver1, myserver2, and myserver3, behind a firewall that the higher-ups run. They recently changed the firewall to block all ports except for the ones they want open. I have www.myserver1.com viewable to the outside world, but www.myserver2.com is not viewable to the outside world. I was wondering if there is a way to set things up so that people could go to [URL] and view the [URL] and [URL] website content.
myserver1 is running Solaris 7, which will (hopefully) be upgraded to Ubuntu 10.04. myServer2 is running Ubuntu 8.04. myserver3 is running Windows XP. I was wonder if this is possible with any OS, not just mine.
View 2 Replies
View Related
Apr 8, 2011
My hosting server is running Linux / Apache. It would be very nice to be able to link some files (preferably hard links, but symbolic links also would help), but haven't a clue how to do so. I would be willing to write a server side php script if that would do the trick.
View 4 Replies
View Related
Jan 22, 2010
i have an AP set up and would like to have all requests for a website sent to a specific ip address.. and am trying to get this to work in IP tables
user-->AP-->google.com
no matter what site they try to goto it takes them to [URL] i want to use this to require people to login to my server when they connect to my AP before they can go any further.
View 4 Replies
View Related
Mar 11, 2010
I have 10 systems working on LAN with fixed IP given to all the 10. I have ubuntu installed. "ifconfig" shows my IP on eth0 interface. Query : I've my blog at /var/www with Apache installed and it works fine when i give the IP address of eth0 (Not 127.0.0.1). And it works from any system when i gve the IP address.* How can i change the IP address to a simple URL. Eg: Instead of I've tried:1) Adding entry to hosts & configuring httpd.conf in apache. Did not work.2) I don't want any bind, as it should be accesible only within the LAN
View 9 Replies
View Related
Sep 15, 2010
I've actually gotten a webserver (hardy heron, server edition) working before and had a Joomla site up I could find on the net. But I did a fresh install of Lucid Lynx (desktop edition, that I added some packages to to use as a server). Between the router (wrong ip address?), port forwarding (set right?), my domain nameservers (godaddy) and the DynDNS service I use (for dynamic ip) I must have a wrong setting because, my joomla website shows up at localhost, but not 'out there' so to speak. I would like to get this site out there and working soon, as it's one I'm just doing free for a Community Garden.
View 2 Replies
View Related
Mar 25, 2011
how do i teun an IPaddress in to a website name that i payed for? useing apachie 2. think stupid what line number to enter what code(s) i use notepad++ to edit system files with coreftp and putty by my side.
View 6 Replies
View Related
Apr 26, 2010
I am having a problem with internet browsing. Whenever I type the address of any webiste like Google
or URL...or any other, the firefox gives message at "Status Bar" that "Looking up google.com" or "Looking up yahoo.com" etc for every website for about 20-25 seconds and than launches the website successfully. Why this is happening and how can I correct it?I also tried this in Opera and Google Chrome and same problem occurs in them.Moreover, if I ping any domain inside terminal, it instantly starts pinging (with ttl 51) and recieving data from that domain resulting that the problem is with browsers.
View 1 Replies
View Related
Apr 4, 2011
I set up an apache webserver on a redhat enterprise server 6 last week. It works fine on the localhost. However, the webpage can't be accessed from the other computer. I didn't modify anything related to 'allow,deny' in httpd.conf. The only thing I've done is I added a rule in iptables to approve the access from a computer with a specific IP address. Since I am quite new to iptables, I don't know if there is anything wrong with my setting.
Even I stop iptables, the problem is still there. I don't know if my setting of iptables is correct. Or, there is anything else that I should do?
View 7 Replies
View Related
