Networking :: ASUS Router Not Co-operating?
Jun 7, 2011
Installed ASUS WL-500gP V2. After a lot of trouble with periodical success getting a HP Deskjet F2420 working and then again not working through this router I thought I had bricked it altogether. Got it back by 30-30-30-method, but now I cannot get through to it, the IP address 192.168.1.1 is not working, somehow. Need to find out if it is recognizing my printer and to see if the connection is protected or open. How the heck can the address all of a sudden not work when the router is working and my Windows (huh...) laptop is connecting OK??? Is there any way of finding out the right address, through the Windows laptop "run" I typed "cmd" and then in the DOS prompt "ipconfig/all" and got a new address = 192.168.2.53, but that did not do any good, either.
View 14 Replies
ADVERTISEMENT
Feb 22, 2011
i ordered an AsuS Eee PC 1215T netbook off of Newegg:[URL].. i was confused and surprised to discover it didn't have an operating system, only the Express Gate Cloud. it was advertised as running on windows 7, but it's not installed. i called the ASUS tech support not once, but TWICE and they didn't know diddly squat. would anyone be able to walk me through how to install linux on it? the express cloud is a very basis system. there isn't a "my computer" function so i don't know how i would go about installing anything on it. from what i understand this little netbook has great potential, i just don't know how to harness it.
View 5 Replies
View Related
Jul 2, 2011
I installed Slackware 13.37 a few days ago. It's not my first time but I have never setup a wireless connection in Linux before. I am pretty sure drivers for my network card, Asus PCE-N13, came ready to go with Slackware. After 2 days of reading guides about how to properly setup my rc.inet1.conf and rc.wireless.conf files I installed wicd today and it can't see my router.
View 5 Replies
View Related
Jul 18, 2010
Hey, why doesn't anyone ever answer my questions about Linux support for routers?
Can someone please tell me how to set it up. The setup software that comes with it is specifically for Windows.
View 2 Replies
View Related
Apr 13, 2010
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies
View Related
Jun 18, 2011
I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
View 1 Replies
View Related
Nov 6, 2009
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
View 12 Replies
View Related
Apr 24, 2010
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
View 2 Replies
View Related
Mar 26, 2009
These r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
View 6 Replies
View Related
Oct 30, 2010
I've moved a linuxbox from being my gateway (nat, etc) to behind a new gateway (a DD-wrt router). For transparency purposes, I'd like to continue using the old box services, and just have the gateway in front of it.
Here's what I did:
The newgateway is setup for class C, 192.168.0.0
This configuration works, but sometimes it doesn't and I haven't figured out why yet.
At sometimes, clients on the LAN get throughput rates with very little speed loss (using speakeasy speed test). They will run at 33M on the LAN, running through both the newgateway, and the oldbox, and get about 35M with directly connected to the cable modem.
Other times, it seems nothing can talk with anyone, and I am not sure why.
I know what I have done is a little unconventional, but it's a transitional thing, and I am not sure it is the cause of the problem, although it was the last things changed.
View 2 Replies
View Related
Aug 1, 2010
My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies
View Related
Nov 27, 2009
I want to configure linux CentOS 5 as a router using iptable, .Im new in linux so I need the steps to do that
View 5 Replies
View Related
Jun 9, 2010
I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
View 1 Replies
View Related
Jan 13, 2010
Will a Linux operating system lose data during a power failure as does a Windows operating system?
(If yes.) This has not come up before but I'm going to be doing some work I don't want to lose.
Could you either point me to a backup tutorial or give me the quick overview of preserving stuff with Ubuntu?
View 4 Replies
View Related
Aug 14, 2010
I am thinking of moving the router behind a server and connecting the server directly to the internet via a modem. Are there any security issues related to doing this? or other things I should be aware of. Iptables are implemented on the server blocking access on unused ports.
View 2 Replies
View Related
Apr 20, 2010
How can I send out a broadcast from one device to the other machines on the LAN to reply with their operating system.
View 7 Replies
View Related
Dec 26, 2010
I have hesitated posting this because there are a number of threads on the Asus USB N-13.First let me point out that I am using this device.It worked out of the box in Ubuntu 10.10 after several reinstalls using the native Ubuntu driver.However my speed is stuck at 54Mb/s.When tested on a Win7 machine, the connection speed is much closer to 300Mb/s.In wading through the other threads, I am unable to find anyone who has this adaptor running at N speed in Ubuntu 10.10.I have downloaded the latest ASUS driver for LInux but have not installed it as my previous attempts at doing this failed miserably and each time necessitating an OS reinstall.I am an experienced Windows user but a rank newbie when it comes to Ubuntu. The following is the result of iwconfig:chad@linuxbox:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 Ralink STA ESSID:"midgard" Nickname:"RT2870STA"[code]....
View 5 Replies
View Related
Aug 27, 2011
I'm not the greatest with linux in general, I mean I know my way around it okay but theres still a ton to learn, and 11.04 is the first version to work on my custom PC without messing up after I update it so I'm left with natty. Anyway I bought my PC with an Asus U8B-N13 Wireless adapter. The disc it came with has the program to install the drivers in Windows, Mac, and Linux, but the Linux drivers need to be compile and I'm yet to have luck doing so. I've tried to somewhat follow an older guide here: [URL].. but I made it as far as extracting the .tgz, then running the make command and got a couple errors. Here is that attempt:
Code:
dom@NZXT:~$ cd Desktop
dom@NZXT:~/Desktop$ tar -xvzf DPO_RT3070_LinuxSTA_V2.3.0.2_20100422.tgz
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/iwpriv_usage.txt
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/LICENSE ralink-firmware.txt
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/Makefile
[Code]...
View 9 Replies
View Related
Jul 20, 2010
I haven't been able to find anything really useful on google either. Was hoping you guys could point me somewhere or explain a process that might work. What I've tried so far is downloading the driver from ralink and trying to follow their procedure for getting it setup. Following the readme I get lost at step 3 and attempting to make it, I get:
[boardbox@niflheim ~]$ cd Desktop/2010_07_16_RT2860_Linux_STA_v2.4.0.0
[boardbox@niflheim 2010_07_16_RT2860_Linux_STA_v2.4.0.0]$ make
make -C tools
[code]...
but this hasn't fixed my problem either. I can see networks but I can't connect to anything, so kinda still stuck at square one.
EDIT: Turns out in frustration and absent-mindedness I didn't reboot and that fixed it.
View 1 Replies
View Related
May 5, 2010
I have a Asus N13-usb adapter and i am running ubuntu 10.04 on my desktop. I tried all those commands that you have posted but it led me nowhere. I was wondering if you can help me start off from scratch. I have typed lsub and it showed the device. I followed this thread [URL]and i did it up the part where you downloaded the driver. but i was not able to go further once i typed in the command :
cd Downloads
tar -xvzf
View 9 Replies
View Related
Nov 4, 2010
I have an Asus EEE PC 901 from a few years ago with an integrated wireless card (touted as the "integrated Intel Wireless Wi-Fi Link 4965 AGN LAN chip" on the website). I am running Ubuntu's Desktop remix 10.10.
My computer connects fine to any given wireless network the first time around, but will not connect to it again.
After I disconnect from a network, every time I try to connect again, it continually asks for the password, and never fully connects, but will spend about 20 minutes trying and asking for the password and trying again.
Sometimes, it will say it is connected (100% strength) but will never load the google start page. This will last about 2 minutes, then it will disconnect, and start the never-ending connection process again.
View 6 Replies
View Related
Dec 5, 2010
Chili555 where are you?
I am running Ubuntu Release 10.04 (lucid), Kernel Linux 2.6.32-26-generic-pae, GNOME 2.30.2.
I have installed the ASUS USB-N13 according to your advice in previous posts, specifically, in your advice to 828688 Ben.
The dongle seems to be operating as it should. The LED does its flashing at what appears to be the correct time. Wicd also looks correct. Networks are found with good signals shown. Everything looks correct. But when I attempt to connect, "validating authentication" runs for quite some time, and eventually results in a dialogue window stating the communication failed. The required WEP password is entered in the RT2870STA.dat file, and again in the wicd window.
I have entered as much detail in the RT2870STA.dat file as I dare, and believe it to be correct.
ndiswrapper is not installed. Network Manager is uninstalled. Only wicd remains.
View 9 Replies
View Related
Jun 16, 2011
I've been debugging for a few days and can't get this to work.
I've tried all of the following suggestions:
[URL]
Some possibly relevant command line output:
Code:
$ sudo ifconfig
eth1 Link encap:Ethernet HWaddr bc:ae:c5:68:8b:a2
inet addr:10.42.43.99 Bcast:10.42.43.255 Mask:255.255.255.0
inet6 addr: fe80::beae:c5ff:fe68:8ba2/64 Scope:Link
[Code].....
(I'm connected to an ethernet port which connects to my laptop which grabs the wireless, currently.)
View 4 Replies
View Related
Jul 26, 2011
I recently purchased an Asus n10 wireless usb adapter to use with my media server, running Ubuntu 10.04 LTS (Lucid Lynx). After spending several hours today with many of the threads (especially this one about the Asus n13) it seems that I've run out of ideas.
My network is running a hidden (non-broadcast) SSID ("Potato") with wpa2 personal encryption.
Here is the relevant information from lsusb:
Code:
Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer Inc.
Iwconfig follows. The rest of the values, like link quality & etc, are all zero:
Code:
wlan0 802.11b/g ESSID:"Potato"
Mode: Managed Access Point: Not-Associated Bit Rate: 0kb/s
And the kicker is that the interface doesn't seem to be available, despite the above reports. ifconfig wlan0 up produces:
Code:
SIOCSIFFLAGS: Resource temporarily unavailable
View 9 Replies
View Related
Jul 27, 2011
I recently bought an Asus laptop and had a friend install ubuntu 10.04. After the install was complete I tried to connect to a network and there was no networks available. After some research time my friend said the I need network drivers to install in ubuntu.
View 8 Replies
View Related
Jun 7, 2010
however I have an asus 1005ha with ubuntu 10.04 netbook and I cannot find a way to be able to switch BT & wireless on/off from inside the operating system... (only works, if I disable/enable it in bios before booting...)
View 3 Replies
View Related
Dec 29, 2010
I just installed the latest version of Ubuntu Desktop. When I do a "lsusb" I can see the device present but the light is not on and I cannot see the wireless router.
Amazing that I can be at version 11.04 and it still doesn't see a wireless device and install it.
So, my guess is that I have to root around about 5 different places and gather up a bunch of files so I can get this running.
View 9 Replies
View Related
Mar 16, 2011
Using the instructions provided here, I've been able to use my Linux desktop to VPN into my workplace when running 32-bit Maverick. I've yet to accomplish the same using 64-bit Maverick, which has forced me to install the 32-bit version on my 64-bit Gateway NV55C. Has anyone been able to use Juniper Network Connect on a 64-bit Linux operating system?
View 1 Replies
View Related
Aug 9, 2010
I have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh
View 4 Replies
View Related
Jan 6, 2010
I've read through 99% of the other "kismet config" help threads, and can't find with this.lshw -C network output
Code:
*-network
description: Wireless interface
[code]....
View 8 Replies
View Related
