Ubuntu Networking :: ASUS PCE-N13 Won't Connect - Keeps Asking For Password
Jun 16, 2011
I've been debugging for a few days and can't get this to work.
I've tried all of the following suggestions:
[URL]
Some possibly relevant command line output:
Code:
$ sudo ifconfig
eth1 Link encap:Ethernet HWaddr bc:ae:c5:68:8b:a2
inet addr:10.42.43.99 Bcast:10.42.43.255 Mask:255.255.255.0
inet6 addr: fe80::beae:c5ff:fe68:8ba2/64 Scope:Link
[Code].....
(I'm connected to an ethernet port which connects to my laptop which grabs the wireless, currently.)
View 4 Replies
ADVERTISEMENT
Jul 20, 2010
I haven't been able to find anything really useful on google either. Was hoping you guys could point me somewhere or explain a process that might work. What I've tried so far is downloading the driver from ralink and trying to follow their procedure for getting it setup. Following the readme I get lost at step 3 and attempting to make it, I get:
[boardbox@niflheim ~]$ cd Desktop/2010_07_16_RT2860_Linux_STA_v2.4.0.0
[boardbox@niflheim 2010_07_16_RT2860_Linux_STA_v2.4.0.0]$ make
make -C tools
[code]...
but this hasn't fixed my problem either. I can see networks but I can't connect to anything, so kinda still stuck at square one.
EDIT: Turns out in frustration and absent-mindedness I didn't reboot and that fixed it.
View 1 Replies
View Related
Jan 4, 2011
Running Ubuntu 10.04 Unable to get Ubuntu to find the ASUS USB Wireless to connect for network. I got the Broadcom to work using ndiswrapper but the range on it is unbearable meaning I have to be in the same room as the router. Hoping this has a much better range.
[Code]...
View 9 Replies
View Related
Mar 29, 2010
I have ASUS Laptop A6Rseries was running XP untill I installed Linux 9.10. Now i am having problem connecting to my wireless network. I am using Belkin router what works fine with XP, Vista and Windovs 7. Here is some information what I found
lspci
00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
[code]....
View 2 Replies
View Related
Feb 5, 2011
Just got a secondhand Asus EeePC 100P netbook, fresh install of Ubuntu 10.10, and while I can connect to my wireless network and access the router through the browser, I can't connect to the internet. Pinging any other sites, either by domain name or IP, doesn't work. I've tried various things suggested in similar threads (putting in the DNS server info manually, disabling ipv6, restarting about a gazillion times), but nothing's worked so far. (My other computer, a Mac, can connect just fine.)
Attempted to install ndiswrapper, failed miserably, and I'm not sure if that's just for situations where the wifi itself doesn't work?
I'd be very grateful for any suggestions.
Here's what's under Connection Information at the moment:Interface: 802.11 WiFi (wlan0)
Hardware Address: 1C:4B6:85:13:F4
Driver: ath9k
Speed: 1 Mb/s
Security: WEP
[Code].....
View 9 Replies
View Related
Nov 20, 2010
new to ubuntu and having difficultly connecting to my wireless router.It can see the router but will not connect keeps asking for password.usb adapter is working 100% as i can connect with it using xp 64bit.
View 4 Replies
View Related
Jul 19, 2011
I want to make a vpn connection with no password but I can't.
View 5 Replies
View Related
Mar 29, 2010
I'm using Ubuntu 9.04 on my eee pc 901, as mentioned above, I been trying to connect to my home WIFI(WPA enable) yet it keep asking for password,
View 8 Replies
View Related
May 22, 2010
I'm wondering if I can get an answer to this oneI'm pretty new to Ubuntu, been using it off and on for a few months now. Right now I'm using Lucid and I have no problem connecting to the other PC's in my house that run Windows 7, however when I try to access them it asks for a password. I disabled the password on the Windows PC, so is it possible to get into them without a pass? If so, how
View 3 Replies
View Related
Oct 31, 2010
I'm running Ubuntu 10.4 Netbook Remix on a Dell Mini Netbook 9 (I think that's what it is.) I used to be able to connect to my wireless internet fine, but then my brother put a password on it. So there's a little box that comes up and tells me to enter a password now. I do, and it tries to load for a minute and then wants me to enter my password again. It just keeps going like this.
View 9 Replies
View Related
Oct 18, 2010
Is there a way i can setup my computer so i can connect to my wireless network without the use of an admin password? i personally feel that it wouldn't be a security risk of any sort to not require a password to connect to an ecrypted wireless connection.
View 9 Replies
View Related
Feb 18, 2011
I am running 10.10 and i have an asus N13 and it works BUT it will only connect to G networks i believe i have an Asus rtn16 N router with WPA2 Aes encryption and it wont connect it just keeps asking me for password.
View 2 Replies
View Related
Jul 28, 2010
I take it home turns out its a eee pc asus with linux. there isnt even a cd drive on this computer, i am currently using my wife's computer trying to learn about linux, never used this OS before, I know nothing past the general windows xp user. well i start it up and there is a username and password, how do i reset this password? i read all about this GRUB and command prompts but i dunno even know how to get to command promts, and i dont know anyone smart. and i cant use a password recovery disc cause there is no cd rom.
View 9 Replies
View Related
Jan 20, 2011
When I need to type in the password to get on a wifi network, the "connect" button is grayed out and unclickable until I've typed in 8 characters for the password, making it impossible to connect to networks with shorter passwords. I'm not sure if this problem is unique to 10.10 or not, I've been using linux for a couple years now and I've never tried to connect to a network with such a short password before until last weekend, after my friend figured out how to change his password from the one his ISP set for him.
I'm running Xubuntu 10.10 on an IBM T42 laptop, here's the relevant hardware from the lspci command, 02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
View 4 Replies
View Related
Mar 9, 2011
I've just literally gone out this morning and bought the Belkin N300 Dual Band USB for my Deskstation running Maverick Meerkat. At first i put the stick in and nothing happened. So i went to System>admin>Windows wireless drivers and clicked on there. I put the CD in the drive that came with the dongle and found the drivers folder on the disk. I then installed the .inf file in the XP folder. It connected straight away as easy as that.
I'm really frustrated though as it loses conectivity and then asks me for my WAP password on connection, but then doesn't seem to connect. I unplug the dongle and then hit connect again and it connects.
If i use the same dongle on XP i have no problems what so ever, so i know its not a signal strength issue.
View 8 Replies
View Related
Jan 12, 2011
Trying to figure out if there is a way to connect to a cifs share, and only being prompted for one password? ie using the following:
sudo mount -t cifs //goanna/neddy -o username=neddy,iocharset=utf8,file_mode=0777,dir_mode=0777 /mnt/neddy
prompts twice for a password (sudo & the share password). Is there anyway to "catch" the sudo password for the connect? (Long shot!
View 1 Replies
View Related
Jul 5, 2011
I keep getting a "bad password" error message when trying to connect via wpa_supplicant to a wireless network (Apple Time Capsule WPA/WPA2 mixed).
Here's my wpa_supplicant.conf:
Code:
And the relevant line in the /etc/network/interfaces file:
Code:
The Time Capsule log contains the following error message--
Code:
So perhaps the password is somehow getting lost in translation from Ubuntu to the Time Capsule?
View 9 Replies
View Related
Oct 8, 2009
I have installed F11 and i found difficult toonnect to the internet where as in the windows its working fine. I am using BSNL Broad band connection.A username and the passwrod is given
View 1 Replies
View Related
Apr 9, 2010
I use an atom based processor of 1.60 ghz on intel d945gclf board. My ram is a zion 1gb @ 533mhz. Hdd is from western digital 80gb @ 7200 rpm. I have a broadband(dsl) connection from bsnl dataone (a state owned telecom service provider). I connect to internet via a huawei wa1003a ethernet/usb/wireless modem which is provided by my service provider. I need a username and a password everytime i connect to internet via dial-up.
I was using windows xp service pack ii. It was nice and easy installing my modem on xp either via usb or ethernet. Both ways it was easy as i have both the drivers with me.Only and main problem was fighting viruses. I tried many free downloadable anti-virus software to protect my maching. Initially they were fine. But after few months they stopped taking regular updates and became non-functional. I also tried symantec corporate v.10. But it has its drawbacks also. It made my machine perform like a snail.I had previously heard about linux based operating systems. But never tried one. As i am an ameteur in using computers windows xp was suiting my needs. Recently i saw an article in the newspaper about ubuntu which is a free open source operating system. And most important to me it is virus free.But here is a problem also. I cannot connect to internet. My ubuntu 9.10 karmic koala is not identifying my modem and a network between my modem and my machine cannot be established. Also i cannot create a dial-up option where i can give username and password.
View 3 Replies
View Related
Feb 17, 2010
Under OpenSuse 11.2 i cannot connect to my wireless network. Sometimes computer doesn't see network, sometimes computer cannot connect to it. Encryption: WPA & WPA2 Personal Kernel driver: ath5k Also I am embarrassed that in lspci and yast written various models of my wifi adapter.
Code:
linux-ra0h:/home/miksayer # lspci | grep "Wireless" 01:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
View 9 Replies
View Related
May 9, 2011
The motherboard has a SiS190 100/10 Ethernet Device. Apparently it worked once during installation and then never again. But it works fine in Win XP (in fact I have SlackWare installed in dual boot) My Internet connection is throgh an ADSL.17 may: one thing led to another and now I have more things to do and learn that time yo do it. smallpond's answer has been very important un showing the way, but Iḿ still working on it
View 1 Replies
View Related
Nov 7, 2010
Im a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopś internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )
Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.
[Code]...
View 9 Replies
View Related
Jul 14, 2011
I can't seem to get my wifi connection going on my laptop. The wired connection works fine, and the wifi seems to detect networks, but upon trying to connect I get "Bad password". Network at this location uses WPA2.
Upon lspci | grp "Network" I get
Code:
02:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
and on lshw -C network I get;
Code:
*-network
description: Wireless interface
[Code]....
View 9 Replies
View Related
Dec 26, 2010
I have hesitated posting this because there are a number of threads on the Asus USB N-13.First let me point out that I am using this device.It worked out of the box in Ubuntu 10.10 after several reinstalls using the native Ubuntu driver.However my speed is stuck at 54Mb/s.When tested on a Win7 machine, the connection speed is much closer to 300Mb/s.In wading through the other threads, I am unable to find anyone who has this adaptor running at N speed in Ubuntu 10.10.I have downloaded the latest ASUS driver for LInux but have not installed it as my previous attempts at doing this failed miserably and each time necessitating an OS reinstall.I am an experienced Windows user but a rank newbie when it comes to Ubuntu. The following is the result of iwconfig:chad@linuxbox:~$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 Ralink STA ESSID:"midgard" Nickname:"RT2870STA"[code]....
View 5 Replies
View Related
Aug 27, 2011
I'm not the greatest with linux in general, I mean I know my way around it okay but theres still a ton to learn, and 11.04 is the first version to work on my custom PC without messing up after I update it so I'm left with natty. Anyway I bought my PC with an Asus U8B-N13 Wireless adapter. The disc it came with has the program to install the drivers in Windows, Mac, and Linux, but the Linux drivers need to be compile and I'm yet to have luck doing so. I've tried to somewhat follow an older guide here: [URL].. but I made it as far as extracting the .tgz, then running the make command and got a couple errors. Here is that attempt:
Code:
dom@NZXT:~$ cd Desktop
dom@NZXT:~/Desktop$ tar -xvzf DPO_RT3070_LinuxSTA_V2.3.0.2_20100422.tgz
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/iwpriv_usage.txt
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/LICENSE ralink-firmware.txt
DPO_RT3070_LinuxSTA_V2.3.0.2_20100422/Makefile
[Code]...
View 9 Replies
View Related
May 5, 2010
I have a Asus N13-usb adapter and i am running ubuntu 10.04 on my desktop. I tried all those commands that you have posted but it led me nowhere. I was wondering if you can help me start off from scratch. I have typed lsub and it showed the device. I followed this thread [URL]and i did it up the part where you downloaded the driver. but i was not able to go further once i typed in the command :
cd Downloads
tar -xvzf
View 9 Replies
View Related
Nov 4, 2010
I have an Asus EEE PC 901 from a few years ago with an integrated wireless card (touted as the "integrated Intel Wireless Wi-Fi Link 4965 AGN LAN chip" on the website). I am running Ubuntu's Desktop remix 10.10.
My computer connects fine to any given wireless network the first time around, but will not connect to it again.
After I disconnect from a network, every time I try to connect again, it continually asks for the password, and never fully connects, but will spend about 20 minutes trying and asking for the password and trying again.
Sometimes, it will say it is connected (100% strength) but will never load the google start page. This will last about 2 minutes, then it will disconnect, and start the never-ending connection process again.
View 6 Replies
View Related
Dec 5, 2010
Chili555 where are you?
I am running Ubuntu Release 10.04 (lucid), Kernel Linux 2.6.32-26-generic-pae, GNOME 2.30.2.
I have installed the ASUS USB-N13 according to your advice in previous posts, specifically, in your advice to 828688 Ben.
The dongle seems to be operating as it should. The LED does its flashing at what appears to be the correct time. Wicd also looks correct. Networks are found with good signals shown. Everything looks correct. But when I attempt to connect, "validating authentication" runs for quite some time, and eventually results in a dialogue window stating the communication failed. The required WEP password is entered in the RT2870STA.dat file, and again in the wicd window.
I have entered as much detail in the RT2870STA.dat file as I dare, and believe it to be correct.
ndiswrapper is not installed. Network Manager is uninstalled. Only wicd remains.
View 9 Replies
View Related
Jul 26, 2011
I recently purchased an Asus n10 wireless usb adapter to use with my media server, running Ubuntu 10.04 LTS (Lucid Lynx). After spending several hours today with many of the threads (especially this one about the Asus n13) it seems that I've run out of ideas.
My network is running a hidden (non-broadcast) SSID ("Potato") with wpa2 personal encryption.
Here is the relevant information from lsusb:
Code:
Bus 001 Device 003: ID 0b05:1786 ASUSTek Computer Inc.
Iwconfig follows. The rest of the values, like link quality & etc, are all zero:
Code:
wlan0 802.11b/g ESSID:"Potato"
Mode: Managed Access Point: Not-Associated Bit Rate: 0kb/s
And the kicker is that the interface doesn't seem to be available, despite the above reports. ifconfig wlan0 up produces:
Code:
SIOCSIFFLAGS: Resource temporarily unavailable
View 9 Replies
View Related
Jul 27, 2011
I recently bought an Asus laptop and had a friend install ubuntu 10.04. After the install was complete I tried to connect to a network and there was no networks available. After some research time my friend said the I need network drivers to install in ubuntu.
View 8 Replies
View Related
