Installation :: Editing Fstab To Allow RW Access For All Users To A NTFS Partition
Mar 14, 2009
Sometimes Linux just make you want to throw the PC out of the window, and get a new one with WINDOWS on it...Having only just "got" the idea that there are a nunber of ways of issuing chmod, I now find that there is yet another when in the fstab file. It is an easygoogle to find out a workaround to make this drive RW, but doing that way one does not learn what is actually happening.how do I find out UID and GID? fmask and dmask, how do I find out what the current settings mean, and what they should be to allow RW access for various groups/users or for everyone?
I have two NTFS volumes I want to automount at boot. I can't get my user account to mount them in Fedora 10. I keep getting the message that the two lines I have edited in fstab are bad. The volumes are sda2 and sda8, and the volume names are SPACELAB and Spaceman. I also need to be able to mount an NTFS usb drive from time to time. I am getting frustrated, so I have posted my fstab file below,
# # /etc/fstab # Created by anaconda on Sun Mar 1 12:44:11 2009 #
i want to mount NTFS by normal users so i used the following entry in fstab /dev/sda6 /media/Mostafa ntfs-3g noauto,exec,rw,user 0 0 however when i try to mount the partition i get the following error Unable to mount Mostafa
Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sda6': Permission denied Failed to mount '/dev/sda6': Permission denied Please check '/dev/sda6' and the ntfs-3g binary permissions, and the mounting user ID. More explanation is provided at NTFS-3G Questions at Tuxera
I'm dual booting with Windows 7 and would like to have my windows 7 user folder mount when I boot.
After some looking around I edited /etc/fstab to add the following line:
This works. But it mounts the windows partition from the root level. I'd like to just mount C:UsersFHSM (/Users/FSHM) to /mnt/windows.
I'm trying to get it so that when I click on the windows drive I get my windows user folder instead of having to click through from C: to get to it.
I'm the only user on this system but if I created a second windows user would my home folder mount for that person too or does setting the user ID prevent that from happening?
I'm attempting to add an additional HDD to my system (without having to format it). I was told that I need to edit my Fstab. I'm trying to get an internal SATA drive mounted. I'm getting these two errors when I try and mount the drive DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
and
DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
my Fstab is as follows.
# /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5).
I have installed Fedora 12 i686 Live to a 200 mb partition on an external drive. Before the install I created a 6.7 GB ext3 partition and a 45 GB ext3 partition. The live cd copied the image to a 200 mb partition.
partition 2bce0f9d-53a6-4ec2-b5ad-1a6915c74260 is 45 GB partition 4683EB23BED2EB34 is 102.6 GB NTFS partition b7240ff1-0807-42ba-e172-bff5872519ad is 6.7 GB
[code]....
Will creating an entry in fstab sdb6 and sdb8 allow the fedora distrib dvd to install to the external hd? How do I create the entries? I have a raid0 hd with windows xp pro. When i try to shrink the partition using anaconda, I get a disk error and the comper locks up. I have to shut off the ups to reboot.
Anybody know how to make an ext3 or 4 partition start up at boot with only the owner and its group having read and write access permissions.I don't want 'others' to have folder access. This is what i have done. / etc/fstab:/dev/sdb5/media/Data ext4 owner 1 2 The folder starts on the boot since it has been allocated a folder as u can see. Next i changed the the ownership and the group ownership of the folder:chown johnny:johnny /media/DataThe problem is that other users can few my partition since 'others' have read access. How do i change that to zero access?
I have dual-boot XP/Karmic.I have an external HDD for backup. One partition is NTFS for the XP stuff. The second partition is ext4.I was practicing with the SystemRestoreCD, which provides a Linux root console.I can create and delete directories on the ext4 partition, but not on the NTFS partition. The error message says "read-only file system".I tried to use chmod and chown to change permissions and owner.I assumed that as root, I could do anything.How can I access the NTFS partition, and do anything that I need to do?All my current XP stuff on the HDD was backed up from within XP, using standard software (Cobian Backup), and normal user privileges. But I want to practice for when my XP OS is damaged.
I recently formated my harddrive and instead of theld fat32 partition for windows partition I used ntfs. I am mounting this partition in /media/windows in debian linux. But it shows a cross (x) symbol above the folder and says I don't have the permission to access it. the permission on the folder is (drwx_ _ _ _ _ _ ) and it is owned by root. So I changed it to my user name -- sid by doing the followingsudo chown -R sid:sid /media/windowsHere are my questions1) Now it allows me to access the folders but all the files like pdf or photos have a cross on right top corner and it says access denied. Is this because of ntfs since with fat32 I didn't have this problem.
2) Also I have a /data (ext4) partiton which is a common partition for datafiles between Ubuntu and Debian. It has the permission -- drwxr_xr_x . I am trying to write to this partition and save files but it doesnot allow me to do it. do I have to make chmod 777 to do that?3) How do I make sure that both windows and /data partition are writable right from the beginning at the boot time.
I have a partition on my hard drive that i use for documents. In 9.10 i would just click on places, and then on the partition name. It would ask for my password and i would be able to access the files. I just upgraded to 10.04 and first off i do not see the partition at all. I navigated to filesystem>media and found my partition but i has a gray X on it. I did gksu nautilus and when i access the folder, there is nothing inside.
I tried to search around for a way to access my windows partition from within Linux. I was unable to mount the same using "mount" command. I read of a tool "ntfs-config" as well, this too didn't work for me.
Please share if anyone out there has an idea on how we can access the windows partition (NTFS) from within Ubuntu 10.10 Maverick.
I will be great if someone helps me to know how to access NTFS partition in CentOS 64 bit. I tried with google and could mount the partition but read/werite operation is too slow.
I was trying to resize a NTFS partition using GParted and trying to enlarge it using some unallocated space (about 400 or 500 MB unallocated space) but something went wrong and now I am unable to access the NTFS partition. The unallocated space is still there.The error details are reported at the bottom of this mail, plus the content of fstab and mtab.Do you have any idea on what caused the error and how to recover the partition?
I have a removable SATA Mobilerack which i use to play with.It has redhat linux loaded on a 500GB disk and i made a new partition using fdisk and then made an ext3 filesystem with mkfs. I then tried to edit fstab to add the new partition but have obviously stuffed it up. When I tried to reboot I get the error fsck ext3: UNABLE TO RESOLVE `LABEL=/mnt'.
I was attempting to format a flash drive, and well, used the wrong sdX device. I've run DiskInternals Partition Recovery tool, and all my files are still there (you have to pay $139 to have it restore the files). Is there any way using tools in linux to restore the ntfs partition/files? It was a single disk with the partition taking the entire drive. I've tried mounting it with the -t option, but it says invalid ntfs signature. Man, two lessons the hard way, make sure you backup (duh) and be careful what you type as root.
I have installed Ubuntu 11.04 64 bit desktop version on ext4 partition without swap. I have maximus iv extreme motherboard with 8 Gbytes RAM. Using 3 internal ntfs formatted hard drives and 3 external ntfs usb 2.0 hard drives.When I am trying to copy or move files FROM or TO any ntfs partiton it is 90 percent chance it is going to freeze.For copy/moving files I am using krusader run as ROOT or as user without root privilege or Nautilus as user without root privilege. It wasn't possible to switch to another terminal - it simply does not react on keyboard or mouse input and only hard reset is possible (scares me because of ntfs disks)From this point of view I have suspicious on ntfs driver but:I am completely beginner in linux and I am looking for help to navigate me how to investigate to find what is causing the problem eventually to solve it?
According to my experience it seems to does not matter if hard disk is internal or external connected through SATA II or SATA III or USB 2.0. I have tried to manipulate with ntfspartitions through the vmware or virualbox or truecrypt software or just do a simplecopy/move files - it have has always the same results - freeze. There is not possible to say how long it is going to work properly and when it is going to freeze - sometimes it's working hour, sometimes it's working couple of seconds - no matter if it is read or write operation/s within ntfs partition.
I have made an entry in fstab that is keeping me from booting. I am able to get into recovery either from entering "M" as it is trying to mount my bad entry or from Grub.
However once in recovery I am unable to save my edits in vi. I have tried several attempts at saving my edits to no avail. What trick will I have to impose in order to clean up my fstab so I can boot successfully.
I am trying to set up a network where users can login to a central server which gives access to a partition depending on their role in the company e.g development or HR.my ideal world would be a computer sits on the desk. someone comes along logins they have all their files. they can then login with the same user information else where in the office.
Storage information: 1st primary:SG 160G ATA 100 1st secondary:WD 160 ATA 133 SATA:WD 1000 2nd primary:DVD 2nd secondary:DVD±RW
Winxp in 1st primary.I did a fresh install of lenny on 1st secondary.
info about lenny setup: 1.Partition list:/boot,/,/home,swap 2.Every partition is XFS except swap.
At the end of installion,lenny installed grub on (hd0) that is 1st primary.
Everything seems OK.Lenny runs OK.
But when I switch back to windows xp,the diskmgmt can not detect hdd's info and the system meets a problem of shutting down.
After many times of trying. I solved the problem by the following way. 1.Boot with windows xp's install CD and use fixmbr on (hd0). 2.Boot with lenny's install DVD , do a grub>root (1,0)>setup (hd1) After that,edit /boot/grub/menu.lst and change (hd0,0) to (hd1,0) and also (hd1,0) to (hd0,0). 3.Reboot and Press F8 for a boot menu then I can select which disk to boot. windows boot from 1st primary's mbr,lenny boot from lenny's grub.
The problem is caused by a bug between GRUB and windows' mbr and maybe more about GRUB and XFS.
Im trying to config my intranet to be accessible from inside the network (lan) without need of password and ask for a passwd for those who are viewing from Wan ....
Today my intranet can only be accessed from Lan, external access give me an Unauthorized message, I took look around, try #irc and still can get the appropriated help, I hope that someone here could help me on that...
Using: Debian Lenny. I want to mount 2 NTFS partitions in my /etc/fstab file, so that I needn't manually mount them when I want to use them. One of the partitions is the primary partition on the same hard disk as my Debian /, /home, and /swap partitions. The other is a 2nd internal hard disk.
a) Should I use ntfs-3g instead of ntfs as the /etc/fstab filesystem? I want to be able to read and write to the partitions as a user and not just as root.
b) I have read on the forum that "mounting NTFS partitions through fstab is not a great idea" - I thought that any dangers of doing so were ancient history. Why would it not be a good idea?
c) Which options should I use?
d) If I use 'user' instead of 'users' so that one specific user (me) can use the partitions, how do I specify which user name? (The man page is annoyingly unclear about this).
Now however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP Mint Ubuntu-Studio Edubuntu One of the E17 OSs Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
using suse 11.3 and kde 4.4.4 on the mounted fat32 partition I cannot change icons partition is mounted in fstab in this way:/dev/sda8/ /dati vfat user, users, gid=users, umask=0002, utf8=true, 0, 0.I can create files folders modify, move and save them on the partition but if I try to change the icon (in dolphin right click>properties>click on icon) of the /eros folder (or any other folder or link) system gives me this error:impossibile salvare le proprieta' , non hai accesso sufficiente per scrivere su /dati/eros/.directory tha in english is something like this: impossoble save properties, you havent enough permission access to write on /dati/eros/.directory this happen also as superuser I remember that with suse 11.0 or 10.3 I was able to change icons on fat32 partitions, now with 11.3 I cannot, there ought to be a way to do what I did with the previous version with this 11.3 brand new ad more advanced version shouldn't it?
I am doing major deployment of opensuse 313 pcs from windows to opensuse. I am having a problem that I have to keep 2 ntfs partitions intact will deleting the partition that has windows. Now everything goes well, opensuse installs but the problem is that I cannot give user full rights to ntfs folders. I have used graphical file permission methods n terminal chown n chmod methos but still permissions revert back to root.
I am trying to restore an NTFS partition from a backup and I need the new drive to have the old (dead) drive's UUID (which I recorded).I really really really cannot use the option of changing fstab to mount using a new UUID, for this case I need the old UUID that existed on the other drive.Is there some ntfs equivalent of tune2fs that'll let me change the UUID on an ntfs partition?
