Ubuntu Installation :: Editing Fstab To Add An Additional HDD?
Sep 26, 2010
I'm attempting to add an additional HDD to my system (without having to format it). I was told that I need to edit my Fstab. I'm trying to get an internal SATA drive mounted. I'm getting these two errors when I try and mount the drive DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
and
DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
my Fstab is as follows.
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[code]....
View 9 Replies
ADVERTISEMENT
Apr 30, 2009
I have three hard disks in my PC , hda is used for /, /home, /boot and swap. Everything seems to setup fine here I then have partitions sdb1 and sdc1. On the edit partion options for these hard drives I can set the mount point. I have never seen this before with the other distros I have used and usually have to mess around with fstab after install to mount these disks, so was pleased to see this option.
Under my previous install (Debian, which I didn't use for long) I had these drives mounted under /media/store1 and /media/store2. This is reflected in the "Edit Parition: /dev/s***" options where the "Original File System Label" is shown as store1 and store2 for each disk
[Code]...
View 2 Replies
View Related
Mar 14, 2009
Sometimes Linux just make you want to throw the PC out of the window, and get a new one with WINDOWS on it...Having only just "got" the idea that there are a nunber of ways of issuing chmod, I now find that there is yet another when in the fstab file. It is an easygoogle to find out a workaround to make this drive RW, but doing that way one does not learn what is actually happening.how do I find out UID and GID? fmask and dmask, how do I find out what the current settings mean, and what they should be to allow RW access for various groups/users or for everyone?
View 7 Replies
View Related
Jan 19, 2010
I have installed Fedora 12 i686 Live to a 200 mb partition on an external drive. Before the install I created a 6.7 GB ext3 partition and a 45 GB ext3 partition. The live cd copied the image to a 200 mb partition.
partition 2bce0f9d-53a6-4ec2-b5ad-1a6915c74260 is 45 GB
partition 4683EB23BED2EB34 is 102.6 GB NTFS
partition b7240ff1-0807-42ba-e172-bff5872519ad is 6.7 GB
[code]....
Will creating an entry in fstab sdb6 and sdb8 allow the fedora distrib dvd to install to the external hd? How do I create the entries?
I have a raid0 hd with windows xp pro. When i try to shrink the partition using anaconda, I get a disk error and the comper locks up. I have to shut off the ups to reboot.
View 11 Replies
View Related
Mar 29, 2009
I have two NTFS volumes I want to automount at boot. I can't get my user account to mount them in Fedora 10. I keep getting the message that the two lines I have edited in fstab are bad. The volumes are sda2 and sda8, and the volume names are SPACELAB and Spaceman. I also need to be able to mount an NTFS usb drive from time to time. I am getting frustrated, so I have posted my fstab file below,
#
# /etc/fstab
# Created by anaconda on Sun Mar 1 12:44:11 2009
#
[code]....
View 13 Replies
View Related
May 20, 2011
I have a problem and I am on the way to become desparate. starting to hate and I hope that you can help me out of my misery so here it goes: I have an additional internal harddrive, which is formated with NTFS (because of having access with Windows). I want to make regular backups on this drive, using Back in Time. But this is not possible, because there is something weired with the permissions and user stuff.
In the YaST partioning manager I have set it so that I as a normal user can mount it. I have created a mount point named /media/Backup for the drive and it is entered in the YaST partitioner and also in the /etc/fstab. When I now do a rightclick on this folder in Dolphin and have a look at the owner of it, I see: root. Group: users.
[Code]...
View 9 Replies
View Related
Feb 5, 2011
I have made an entry in fstab that is keeping me from booting. I am able to get into recovery either from entering "M" as it is trying to mount my bad entry or from Grub.
However once in recovery I am unable to save my edits in vi. I have tried several attempts at saving my edits to no avail. What trick will I have to impose in order to clean up my fstab so I can boot successfully.
View 4 Replies
View Related
Sep 24, 2010
I have a removable SATA Mobilerack which i use to play with.It has redhat linux loaded on a 500GB disk and i made a new partition using fdisk and then made an ext3 filesystem with mkfs. I then tried to edit fstab to add the new partition but have obviously stuffed it up. When I tried to reboot I get the error fsck ext3: UNABLE TO RESOLVE `LABEL=/mnt'.
View 3 Replies
View Related
Jan 5, 2010
What would be the best way list disk and partitions in the fstab file?
View 1 Replies
View Related
Jan 15, 2010
I've had two hd's in my box forever. for more space and backup reasons. Well I have started running the Debian Squeeze distro since December. I've had many issues, some are still unresolved. but now I'm running into major headaches with the fstab. Specifically dealing with/wondering why UUID's are used instead of the old /dev/hd? I was a little annoyed when I tried Kubuntu to find /dev/sd? used instead of /dev/hd? but that was workable. But the UUID's are a nightmare. Here's my problem.
My main box is finally giving up the ghost. The mobo is dying. So in order to do some tests I took my hd bundle (my two hard drives with their cables) physically out of the box and temp installed them in a test box. I wanted to do some benchmark and other tests. I got all kinds of errors. I found that the system wasn't recognizing the UUID's listed in fstab. My concern is when the new mobo gets here next week I won't simply be able to plug the hd's in like I always have been and just let Linux reconfigure itself (Debian used to be good about this). I really don't want to have to clean reinstall if it's not needed.
So for this I have two questions. WHY developers decided to drop using /dev/hd? or even /dev/sd? ?
And is it possible to revert fstab's listings back to the old /dev/hd? settings. In debian fstab had lines commented out showing how each partition was listed in it's /dev/hd? status during install.
I'm getting really sick of all these archane changes in ALL aspects of linux that don't seem to have any good explaination or need.
View 4 Replies
View Related
May 19, 2010
I have installed Xubuntu in English on an older laptop and it works beautifully. Xfce offers Abiword as word processor with an English dictionary. Owing to fact that I live in Europe I require further dictionaries in particular German.
View 1 Replies
View Related
Mar 21, 2010
wanted to try kubuntu without all the additional programs how to install it?
View 1 Replies
View Related
Sep 17, 2010
I've been playing with some intel server board and they provide a type of fakeraid which is called Embedded Server Raid Technology 2. Since Intel officially support RHEL and SLES on their servers, they provide drivers/modules for this fake raid (which supports raid 0, 1, 5 and 10). I have installed RHEL before on these severs and redhat's installer has the ability to load additional modules (via a boot command linux dd).
While intel doesn't provide the modules for other operating systems, they provide a library where people can build their own module for their kernel. I managed to build this module called 'megasr' (for now I've built it for kernel 2.6.32-24-generic which is my testbed at the moment but I would eventually build it for box i386 and amd64 for both server and desktop versions) and load it on a system which is installed on a single drive.
We are able to load it successfully and see the raid 5 as a single volume and access it (partition, format and copy data to it) and all its functions (work in degraded mode, rebuild, etc) work fine but my main goal is to actually install such volume as my main boot volume (similar to how its possible with RHEL or SLES). Is this possible? Load additional modules during the installation that will be present after the installation is finished?
View 1 Replies
View Related
Mar 8, 2011
1. I install Desktop 10.4 or server 10.10 on my 250GB IDE drive using guided partition structure.
2. I add SATA Drives (of varying types and sizes to test) to the system and create a raid.
3. When I restart grub won't initialize with the SATA's plugged in.
4. I have tried this in various ways, installing with the SATAs already connected, making the raid in the install process etc.
I have tried re-installing formatting the drives in windows, deleting partitions, making new ones, low level formatting. It appears to be related to an issue with GRUB re-ordering drives so it is trying to boot off the wrong drive - I would edit grub but it doesn't get that far into the boot. Just rudely flashes it''s cursor at me. Is this really so uncommon that there isn't a straight simple answer?
What makes me think it has to do with partitions and formatting is that when I first added new drives they worked on the boot. I even made the raid in Desktop mode in Server - Rebooted- Rude flashing cursor.
View 8 Replies
View Related
Nov 27, 2009
I downloaded the Fedora 12 install CD's 1 - 5 . During the install, It only ever asked me for the first 3 CD's. Does anyone know what additional stuff is available in CD 4 + 5 ?
View 2 Replies
View Related
Nov 9, 2010
I've seen may similar issues to mine, but some are different and others are identical, but have been resolved since in the repositories. I install Maverick from CD, reboot, update via update manager, reboot, install nVidia driver via additional hardware gui, reboot and I can't get into X, I get tty1 instead with a text login prompt.
dmesg tells me:
Code:
nvidia: probe of 0000:01:00.0 failed with error -1
purging nvidia-* and deleting /etc/X11/xorg.conf means that I can get back into X, but without any hardware drivers.
I have both an onboard and PCI-E nVidia graphics adapters but my PCI-E one is primary.
View 2 Replies
View Related
Oct 14, 2009
I have a laptop that I want to dual boot winxp and linux. I'd like to be able to run a mythtv frontend on it so that I can watch shows in my office and not lose the screen space on my regular desktop. I was thinking of three possible directions to go. I have a question to go with each though.
1.) This machine has an existing winxp install that I don't want to mess up, but is there something on a Fedora live cd that I could use to smashing that winxp install into a smaller space and repartitioning the drive? If so, I could just do an old fashion dual boot from the harddrive.
2.) I put a live install on a usb drive. If I do that, how do I install mythfrontend and make it persistant on the usb drive?
3.) I treat a usb drive like a regular hard drive and just do a normal fedora install, assuming the install sees the usb drive as a sd? device. I guess I don't have a question with this option, but I would rather avoid it since it will take a lot more space on the usb drive.
View 1 Replies
View Related
Jun 17, 2010
I've installed Fedora from the Live CD (Fedora 13). The Installation Guide says that if you install from the DVD (or, as I understand it, the five or so CDs) you get the choice of installing lots more software. I've now got a copy of the CD. But how do I use it to install the extra software it contains? The Installation Guide says use the Add/Remove Software tool. But that tries to download stuff from the Internet. Nothing about installing from the DVD.
View 4 Replies
View Related
Jan 19, 2010
I've apparently changed my fstab file and now my boot drive fails to mount. The original file is still there "fstab.BAK". How do I rename the current fstab to another name and rename the fstab.BAK to fstab? Since this is read only in the /etc directory I have not been able to make this happen from a command prompt.
View 9 Replies
View Related
Jan 19, 2010
What is the simplest way to combine an original installation CD with several hundred additional packages that I have downloaded since the installation? My goal is not to waste future bandwidth downloading packages I already have downloaded. Bandwidth has costs both in time and money.
Background Recently I started experimenting in earnest with Debian Lenny in VirtualBox. I am new to Debian but not Linux based systems. I have seen enough the past several days with my experiments that I would like to migrate from my current Linux based system to Debian.
I installed the Debian 5.03 KDE CD to a virtual machine. In the past several days I have downloaded and installed several hundred packages since the initial installation. I have encountered no major hiccups along the way.
For future use and safekeeping, I copied all of the downloaded packages from /var/cache/apt/archives to a different directory. To become more comfortable with the Debian installation process, I want to repeat the installation several times using the original 5.03 KDE CD --- and all of the subsequently downloaded packages.
As I am new to Debian I am looking for advice and instructions for the simplest way to perform these reinstallations. I would like to perform them without any internet connection. If I understand correctly, I can copy the additional packages to a DVD and then use apt-cdrom to add the disk to my sources.list. Then I should be able to 1) use the Debian 5.03 KDE CD to perform the initial installation, 2) install the additional packages manually. If I understand correctly, something like dpkg -i * should work with the additional packages? Doable?
The "common sense" way is to somehow merge the original Debian 5.03 KDE CD with my additional packages to create my own personal Debian 5.03 KDE Plus DVD for my personal installation use. All I would want is to merge the downloaded packages into the original CD to create my own installation DVD. Nothing fancy or dramatic. Being new to Debian I don't pretend to understand the Debian Installer mechanism. Yet I can tell from the original CD image that I need to merge my additional packages into the pool directory.
I found the wiki how-to for simple-cdd. I started to run the app but stopped because I was unsure how much bandwidth the app is using. The simple-cdd tool needs internet access, but is simple-cdd downloading all the deb packages again? I don't want any of the installed packages to be re-downloaded when I already have them at hand. I'm not comprehending the how-to very well or the various options. I also want to perform a complete installation without an internet connection.
View 14 Replies
View Related
Mar 22, 2011
I got to go to a competition and I have to use debian and win server 2008 in that comp. With the smallest (about 300MB) image, I couldn't add functions because the computer isn't allowed to connect internet, no APT. then, do I need to download all the images? I saw that full image was really huge.
View 3 Replies
View Related
Nov 22, 2009
While doing some basic tweaks, nautilus, panel, display etc I got a pop-up: Additional Firmware Required "to make hardware in this computer function correctly". No more detail than that. Like signing a blank check so I said "go for it". When I rebooted the display was hosed. Like the refresh rate was wrong. So off to xorg.conf to fix it. There is no xorg.conf. After four hours of searching forums and google I gave up and reinstalled (only an hour). This time I made a backup (cp -a) before letting F12 fix the non-existent problem. Tried again very carefully to be sure that what killed the display was the additional firmware. True. That kills my display. Only problem is the backup cp -a when copied back in would boot but would not let me log in!? I could boot "single" change the password, but it said that was already the password.
for me F12 is a "one-day-distro". I have multiple partitions with Ubuntu, Mandriva, SuSE, Slitaz ... My first Linux was Fedora Core 4 and I will try the next Fedora release. For now back to Ubuntu 9.04. I'm still testing 9.10. My graphics is on-board Intel. I think it's 965G chipset. This is a Dell E520N. How would I tell what not to do that firmware addition?
View 6 Replies
View Related
Sep 5, 2010
I have made a Debian minimal installer on a USB drive according to this manual: [URL] I have installed a minimal version of Debian, meaning text-only, with only the kernel, shell, filesystem, and a few programs. Now I need to install the rest of it over the internet. So here are my questions:
1. Where can I find the additional files to install?
2. Where can I find a manual that tells you how to install them? This manual doesn't say anything about that.
3. Are you supposed to install the files during the installation process, or do you get them online through the minimal Debian (using wget, etc.)?
View 3 Replies
View Related
Sep 2, 2010
I made a mistake in my fstab. I know what the problem is and how the fstab needs to be changed. However, since the system will not boot I'm having diffeculty getting in to edit it.The system is running Ubuntu 10.4 64 Bit with LVM2.I have both 10.4 64Bit Server and 10.4 32Bit Desktop cds currently and could burn others if needed. With 32Bit Desktop I'm able to get to a live cd prompt but my hard disks are not mounted.if I try mounting /dev/sda5 to a dummy directory I created it tells me it doesn't know the type of 'LVM2_member'.
View 5 Replies
View Related
Apr 29, 2010
I just ugraded from karmic, and it all went without a hitch. Except now when i boot i get... Error while mounting /etc/fstab press s to skip or m for manual recovery.
Pressing s works and i have a working machine, but i would like to fix this. Not tried the manual recovery yet as i have no idea about fstab and don't want to break it.
View 9 Replies
View Related
Nov 11, 2010
I just went from Jaunty to Maverick. I booted Maverick and manually mounted my Windows Network drives by clicking on the appropriate "mount" command in the directory /media.I then created an fstab file like I did in Jaunty. Here is the smb mount command that I had in the fstab file. I had a file with the user id and password in the credentials file.Code://???.???.??.?public_p/media/servername smbfs credentials=root,dmask=0777,fmask=0777 0 0This provided me access to my server for the past 18 months.I modified the fstab file for Maverick which was working fine for 3 days so I would automatically mount the server drives.
View 1 Replies
View Related
May 13, 2011
I've been using Ubuntu since 7.04 and I've never had this happen. I was at 10.04 and I downloaded the torrent iso of 11.04 and burned it to a CD and used that to upgrade. I don't know if that was the problem, but doing the upgrade that way erased my fstab. When I tried to recreate it, I was getting errors mapping to the fileshares. Turned out the upgrade uninstalled cifs/smbfs as well. In addition to uninstalling wine. After reinstalling, everything is ok.... so far. This was NOT the smoothest upgrade.
View 1 Replies
View Related
Jul 14, 2011
I'm trying to do a net install with the latest release of debian - but my ethernet card is not recognized/the drivers are not available because I have a card that requires a linux kernel version of 2.6.35. This is obviously a problem because I can't download any additional packages, and I can't update the version because I'm not able to connect to the internet. I have installed it, but it's only text (which I assume is because I could not install the graphical interface, correct me if I'm blaringly wrong here). So what can I do to install debian on my laptop and be able to use my Intel Centrino Advanced-N 620 network card?
View 14 Replies
View Related
Jun 6, 2010
I have an old laptop that I installed EasyPeasy Lucid on. I have never used Grub2 as my other Ubuntu installs still use Grub Legacy. I have studied all the tutorials which instruct that the grub.cfg file should not be edited directly.This old laptop has one of the dreaded Intel graphics chips for which the kernel automatically loads the i915 module. Of course (like a multitude of others with Intel graphics and Lucid) I booted into a black screen but knew the workaround was to enable mode setting through grubI used the
Code:
i915.modeset=1
and added it to /etc/default/grub line GRUB_CMDLINE_LINUX, just after "quite splash", just
[code]....
View 9 Replies
View Related
May 9, 2010
I have since quite a long time the problem that files using special characters in their filenames are not displayed in various applications. In console or Thunar I have a special "white questionmark in a rhombus" sign for every special character. It is an XFS partition. I have read a few times that this can be solved by using the iocharset=utf8 option in /etc/fstab, but this option is not recognized and the mount inhibited.
I used other options: utf8 as well as nls=utf8, but that was not recognized neither. What option do I need to specify to enable utf8 for XFS ? Samba works. That means I can play an MP3 file in Windows exported from the XFS disk using Samba, although the special character is then shown as "_" in Windows..
View 4 Replies
View Related
