General :: Installing Canon MX-860 Wireless Printer In Xubuntu?
Sep 16, 2010
I've been running Xubuntu 9.04 for the past couple of months but have difficulty installing my Canon MX-860 wireless printer. Everything else works perfectly and connects wirelessly to internet. Since I run a couple of other Win based computers, printing from the Toshiba 1100 laptop hasn't been a problem. It would be an advantage. I tried to install the latest Xubuntu distro on the Toshiba and it installed but could not connect to the wireless Atheros card. Where should I start? get Distro 10.04 working first or try and install the printer with the existing distro?
View 7 Replies
ADVERTISEMENT
Jun 21, 2011
i am running T43 Thinkpad box with Ubuntu 11.04. we have a canon network printer model i-SENSYS MF4570dn printer, and i am trying to install the UFR II driver which i downloaded from canon website. the problem i am facing is that when i install the driver with gdebi i receive error message saying: Dependency is not satisfiable: gs-esp.i tried to install ge-eps but it is not part of the repository for 11.04
View 7 Replies
View Related
Aug 4, 2015
My purpose is to be able to use Canon printers with my debian jessie system (installed via netinst iso).
I have read this wiki page but unfortunately it is a little old. I still have followed/adapted the instructions there but it fails on my system on step 6. I will explain below.
Latest Canon drivers in the official website is v3.10. US version of it can be obtained from here.
When I try to install .deb package in the driver file archive I get following output:
Code: Select allsudo dpkg -i cndrvcups-ufr2-us_3.00-1_amd64.deb
[sudo] password for ert:
Selecting previously unselected package cndrvcups-ufr2-us.
(Reading database ... 155527 files and directories currently installed.)
Preparing to unpack cndrvcups-ufr2-us_3.00-1_amd64.deb ...
Unpacking cndrvcups-ufr2-us (3.00-1) ...
[Code] ....
And the next thing I tried:
Code: Select allsudo apt-get install cndrvcups-common
[sudo] password for ert:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package cndrvcups-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source. However the following packages replace it:
cndrvcups-ufr2-uk cndrvcups-ufr2-us
E: Package 'cndrvcups-common' has no installation candidate
I cannot solve this package error.
View 2 Replies
View Related
Jun 8, 2010
I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
View 2 Replies
View Related
May 7, 2010
Need to install a Wacom Intuos2 tablet. ALso Have a Canon MP620 multi-function printer that YaST does not see. It tells me that it is a bad port. I have pinged it and it is there but YaST won't let me install it.
View 8 Replies
View Related
Aug 4, 2010
I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:
Code:
Backend returned status 1 (failed)
printer-state-message="Illegal backend: Success"
In opensuse 11.2 I needed to create some links:
Code:
cd /usr/lib64/cups/filter
ln -s ../../../lib/cups/filter/pstocanonij
cd /usr/lib64/cups/backend
[code]....
View 6 Replies
View Related
Jun 2, 2010
I have Canon MX860 Multifunction USB/Wireless printer that I am trying to add in Fedora 13. Looking under Desktop > Computer via USB connection, the printer is detected as some hardware device I can mount and unmount. However, when I am trying to add this printer via System > Administration > Printing, the printer is not detected at all nor can I add. FYI, this printer works fine in Ubuntu 10.04 LTS. How I can make this printer working in Fedora 13?
View 5 Replies
View Related
Nov 13, 2010
Bought a Canon all-in-one (printer, copier, scanner) today, which prints beautifully on XP & connects to our WiFi without problem. Only downside, is it can't find a driver for Linux. Anyone out there using this printer under Linux, or any pointers to the right driver?
View 3 Replies
View Related
Dec 30, 2010
I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.
View 9 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Sep 11, 2010
I have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies
View Related
Oct 19, 2010
I recently bought a used Canon IP1600 Inkjet Printer. It did not come with the cd-rom to install and set up this printer. I downloaded the driver. And i recieved a message saying my system is not modified.
View 1 Replies
View Related
Apr 7, 2011
Are there any (easy to install) (X)SANE backends for Canon PIXMA MP460?
View 1 Replies
View Related
Apr 27, 2010
I have downloaded successfully the drivers for the printer component of the MX330. The scanner drivers are downloaded,but I am unable to locate the working part of the .sh file so that I can open it. I have the .sh file in text, but do not know how to utilize it
View 1 Replies
View Related
May 21, 2010
I have a Canon PIXMA MP628 printer connected to my home network, wirelessly. PReviously, when I was running windows, I am able to print wirelessly.
My printer is connected to my router and has a static IP address of 192.168.0.199
Therefore, how can I make my printer to work in Ubuntu now, since Canon doesn't have any Linux drivers. Am I able to add printer from Ubuntu Printing Service menu? What are the options that I should select?
View 5 Replies
View Related
Jul 31, 2011
I have a canon printer which was working so far. After my latest upgrade its giving errors saying "Printer not connected -- Check your connection" Fortunately I had a backup of my root before the upgrade and one difference I see is that on the new system theres no /dev/usb/lp0 which there is on the old one. So how do I make it? Or should I use the /dev/lp0? Note they are different:
[Code].....
So (naturally) when I tried to make a softlink from /dev/usb/lp0 to /dev/lp0 it did not work.
View 10 Replies
View Related
Dec 18, 2010
Using Ubuntu Desktop 10.10 in a VMware virtural machine. Can anyone point me to instructions for installing an HP Photosmart C310a printer using a wireless connection?
View 3 Replies
View Related
Aug 25, 2009
I am a new convert to Fedora with very little knowledge of Linux in general. I have managed to install Fedora 11 on my Advent 8315 laptop and I have wireless connection via my Belkin Wireless N modem router. I have always been able to setup Windows networking successfully but Fedora is much more complex, using terminology that I am not familiar with. What I need to do to achieve networking with my Windows computer? I especially want to network to my Canon printer which is connected to the Windows PC.
View 6 Replies
View Related
Sep 21, 2009
I want to get my Canon MP210 printer / scanner working under Fedora 8 Linux. When I plug the USB cable in, I get a little popup with a setup wizard, but my printer isn't even in that list. I've tried the system-config-printer wizard as well as going in through the control panels and trying everything reasonable.
View 5 Replies
View Related
Feb 4, 2011
Been using ubnutu gnome for a loooong time and my printer (Canon MX340) has been running just fine, configuration and usage.
I now switch to kde. configure my printer the same way i would under gnome and as soon as i send a job, it processes for about 3 seconds and just marks "stopped" under status. nothing goes through anymore!!
i've updated from 4.5 to 4.6 with backports and nothing is happening on there either.
im running maverick amd64 and using the i386 drivers (with dpkg -i --force-all) which are still recognized even under kde.
p.s.: the printer normally runs as wireless standalone (no samba/cups involvment whatsoever)
View 9 Replies
View Related
Jan 15, 2010
Is there a way to print from a Canon MX 330 All-in-One printer in Ubuntu 9.04? I'm trying to print through a Linksys WRT54G router. The printer is physically connected to a Desktop PC running Windows Vista (64-bit).I've tried installing the printer though CUPS to no avail. I tried the iP4600, iP3600 and iP2600 drivers and none of them have worked for me. I've even tried the Gutenprint PIXMA IP4600 drivers.
View 2 Replies
View Related
Aug 6, 2010
Is there a way to enable my Canon Printer/Scanner PIXMA MP 620B to work with Ubuntu?
View 2 Replies
View Related
Feb 9, 2010
I tried to install lbp 3108 printer driver for fedora 12. printer is not responding to print command what to do?
View 1 Replies
View Related
Feb 28, 2011
I want to use my Canon Pixima MP600 Printer on Ubuntu, but don't know how. The Ubuntu Documents has support for the MP620. Canon USA doesn't offer drivers for Linux.
View 14 Replies
View Related
Jan 16, 2011
I just bought a Canon MF4370dn printer. It comes with Windows drivers on a cd. I was able to configure it for Windows 7 but not for Linux. Where can I get a Linux (Fedora 13) driver?
View 3 Replies
View Related
Aug 4, 2015
I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:
Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....
View 3 Replies
View Related
Sep 22, 2010
I am one of the many people who are having many problems getting the Canon ip1700 pixma printer to work with Linux. I think that it can be done. I've followed every step that I could on this page: [URL] Everything goes fine until I enter the username and password on CUPS, using my "root" and my root password. I get this annoying google chrome thing, "aw, snap, this page can't load..." I really need to use my printer.
View 9 Replies
View Related
Jun 11, 2010
I am interested in acquiring a Canon MP620 printer scanner. I am looking at the printer list from linux.com, and I don't see it there. Wondering if it works really good with Opensuse.
View 5 Replies
View Related
Nov 27, 2010
I just downloaded and installed openSUSE 11.2. It looks good. Very fast and extremely stable.
My problem is that I use a 'Canon MP280' Printer / Scanner / Copier.
It seems that my printer and openSUSE are not compatible.
OpenSUSE can't find Canon MP280.
View 6 Replies
View Related
Sep 6, 2011
I have just installed OpenSuse 11.4 on my old desktop Compaq Presario, I coming from an amount of experience with Linux, anyway, for the moment I have a problem with my printer connected on a domestic network, this printer have an assigned address as the same as for my desktop and all other devices of this network, but I'm not able to connect with it, if I try to connect the printer by USB I haven't no problem, more strange is because of the printer have got a scanner and I was able to connect it via network, the same problem I had with Ubuntu.
View 9 Replies
View Related