General :: Make A USB Floppy On Another Drive And Use That To Boot The Normal USB Drive?
Feb 27, 2011
I have a USB drive on which I want to install Arch Linux (using the installer, not unetbootin or something similar, as I want the drive to be persistent.) The computer from which I want to boot this USB supports booting from a USB floppy, not a normal drive. Is there any way for me to make a USB floppy on another drive and use that to boot the normal USB drive?
View 2 Replies
ADVERTISEMENT
Feb 19, 2010
I am trying to write a floppy boot image to my floppy drive (as root):
Code:
dd if=boot.img of=/dev/fd0
dd: opening `/dev/fd0': Read-only file system
[code]....
View 8 Replies
View Related
Jan 14, 2010
I've installed RHEL 5.3 on a Dell Desktop. I don't want to install GRUB to the MBR. Is there a way to boot up RHEL from a floppy?I've installed GRUB on to a floppy but not having much luck starting up RHEL. In the past Slackware has allowed me to startup the kernel from a floppy using LILO. I was hoping that there is way for RHEL too.
View 6 Replies
View Related
Apr 25, 2010
I have problem with my laptop Samsung VM7000. The BIOS has a password on which I don't know. It has no HDD and the CD-ROM is damaged. I have a FDD floppy drive and two USB slots, they work (tested). To remove password I tried this http://dogber1.blogspot.com/2009/05/...ered-bios.html but it didn't work.Then I've found a Linux based password cracker http://www.pccmos.com/ but, since my cd drive is dead, I can't launch it. I can write it on a flashdrive, but my laptop is not booting from flash, so I have to make a floppy-boot-disc to boot flash via floppy, but how?
View 2 Replies
View Related
Sep 23, 2009
I am having a Promise TX4650 RAID controller & trying to create a driver floppy for installing the drivers. Also am using RHEL 5, I can create the driver floppy, but when I type "mount /dev/fd0 /media/floppy" I get error: "mount: mount point /media/floppy does not exist".Can I get the files in a format other than the ext2 floppy image, so that we do not need to use a floppy drive?There is a readme file inside the driver archive & you can use that as a reference.
View 2 Replies
View Related
Oct 24, 2010
Not sure if anyone uses floppy drives anymore much. I know that most machines don't come with them anymore unless you ask for one.One of my machines [Machine # 2] has a floppy and I have never had the occaision to use it under linux [opensuse 11.2 currently]. Until now that is! I have about 30 floppies that I need to transfer the data from. I am able to mount the floppy drive and take data off the currently inserted floppy, but if I want to insert another floppy and remove the data from it, I must unmount and remount the floppy everytime. There is an entry in fstab:
/dev/fd0 /media/floppy auto noauto,user 0 0
and a mount point in media [/media/floppy] Is there something else I need to have in the fstab line for the floppy so that it will read automatically everytime I insert a disk?
View 8 Replies
View Related
Oct 2, 2009
I was wondering if anyone has a floppy image, or something similar that can help me boot my USB.My plan is to have Fedora LiveUSB on my USB... and whenever I need to help someone, or have to use a computer, I can easily pop in my usb, and run Fedora. One problem I've had is that some of my friends have older pcs, and also some of the computers at college are older.I heard that it is possible to force a usb to boot on a motherboard that doesn't support usb boot. I think it has something to do with installing grub on the floppy, and somehow making it install or run usb drivers. (Not entirely sure)One alternative to this that I came up with was to use one of those business card CD's, but apparently the size is too small(at least in the one's I've seen). Not only that, but I can't find them anywhere.
View 4 Replies
View Related
Dec 13, 2009
Is there something weird about the FLOPPY DRIVE on F12? Nothing associated with it works & I can't get an icon for it. Also the FLOPPY FORMATTER no longer works. (mine is an internal drive)- I had some really miner quirks with it in 10 but it worked. I had some workaround launchers that I used until an upgrade semi-fixed it. (It would give a false error that it couldn't run but did. I just ignored it.)
I tried to edit FSTAB to cure a problem of my BACKUP drive showing up twice*** so while I was in there I added the stuff for the floppy & it still doesn't work. If I try to mount it manually, I get the error that /dev/fd0 doesn't exist.I tried to find some info on it & it SEEMS that there MAY be a bug but I'm not sure as the info is a bit confusing as to just what version & such they are talking about. And there was also the problem that all the stuff seemed to be OLD or not related to my problem.I why I quite hacking at my system, is that all my workaround launchers & the formatter say that there are GNOME things missing & they can't run. So I figure that there is something missing or screwy already & that I'd better ask BEFORE I make things worse or actually break something.With the fact that floppies are about gone, it's getting to be not that big of a deal but I still find myself having to use them for repair purposes (albeit, not as much) & it gets to be a bit of a pain to fire up M$ just to do something like this.
*** It appears that the one in FSTAB was the one I needed, so where would the OTHER one be so I can get rid of it? Or at least make it auto mount.
View 12 Replies
View Related
Dec 22, 2009
I know that several people have answered this type of question before, but I can't seem to find the information I need to get it working for me. According to my research what I want to do cannot be done. However, i'm sure there must be a way.This is my scenario - I will try to be as accurate as I can be to make it easier for poeple to help. I have a Sony Vaio PCG-141C laptop, the half sized old ones. It has a usb floppy drive that I can boot from. I have also got a usb cd-rom drive but the laptop simply will not boot from it! I have got the F12 cd images downloaded and on a usb hard drive.
I want to boot from a floppy disc, to load F12 from the cd images stored on the usb hard drive. Now with Redhat 9 you could use a floppy drive to do just this. However, F12, does not support it.
Is there a work-around that I could try. I have already tried Smart Boot Manager, but it won't detect the usb cd-rom drive. I have Redhat 9 installed on the laptop, and can mount the usb hard drive from terminal. Could I start the install process from here with the images stored on the external drive??Is there anything I can do, or am I doomed to never get past this.
View 6 Replies
View Related
Jun 7, 2009
error message:Unable to scan Floppy Drive for media changes Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
View 1 Replies
View Related
Dec 29, 2010
How do I access my floppy drive from Puppy Linux?
View 2 Replies
View Related
Aug 24, 2010
I'm running the Fedora fc8 (werewolf) and I just bought an external floppy drive from ebay, which I have problem mounting. I've edited the fstab with the following:
Quote:
/dev/floppy-sdb /media/floppy vfat rw,user,noauto 0 0
After inserting the drive into a usb port and run dmesg because the drive is not mounted all, I've the following added to the message log:
Quote:
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usb 5-1: New USB device found, idVendor=0644, idProduct=0000
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: TEACV3.0
code....
View 7 Replies
View Related
Dec 10, 2010
How do you access a floppy drive from linux dsl live?
View 11 Replies
View Related
Feb 7, 2011
Does anyone have any thoughts on getting linux on a x86 Compaq N600c with only a floppy drive, and the USB and PXE options are out of queastion (already tried with Win XP), only option I figure I have is to find a downloadable version that will install from current OS (Win 98se, freeware Service Pack 2.0 patch), but does such a thing exist, and if so where can i find it, (must be GUI). For those of you scratching your head as to how i intend on getting the download to it since i don't have internet. infrared import from another computer that is my gf's and will kill me if i get any linux software on her comp.
View 10 Replies
View Related
Nov 6, 2010
My system has a 3-1/2 floppy drive. I do not know how to open it to copy files to a CD. My system knows itis there since booting with a data floppy gives a non system disk error. nce in Ubuntu, the floppy drive does not appear in "places computer".ince I am completely new to this system, I do not know how to proceed
View 1 Replies
View Related
Jun 22, 2010
Edit: I have a Sony Vaio FJ170 laptop with Phoenix BIOS version R0060X6 & a broken DVD Drive. The BIOS doesn't support booting from USB (it does have 'External Drive Boot' option, but my USB stick doesn't get listed under boot devices in BIOS when connected to the laptop).
A few days ago I upgraded to Windows7, then installed Lucid through WUBI. With the help of another thread of mine (here), I changed the default boot option & timeout of Windows to zero to directly boot into Ubuntu. So far it was good. But recently I tried to get back to Windows for some reason but could not succeed as the F8 key no longer brings up the Window's Advance Boot Menu.
Is there another way to restore the dual boot menu timeout to get back to the Windows installation. Or even better, is there some way to make a fresh install of Windows & Ubuntu side-by-side without DVD drive. I am only 14 and absolutely new to Linux. The network booting methods given on the Internet were too complex for me to understand. I like Ubuntu but also need Windows for programming C++ & Photoshop CS4.
View 9 Replies
View Related
May 25, 2010
What is the difference between vfloppy and virtual floppy disk drive?
View 1 Replies
View Related
Jul 21, 2010
2010.07.21 while trying to install Ubuntu 10.4 I've been trying to install Ubuntu 10.04 on my Dell workstation and am unable to get the Grub-2 bootloader to load properly. It seems to be failing for lack of a floppy drive on the system resulting in an error message that reads : error: fd0 cannot get C/H/S values.
I've gone through the Grub-2 page at [URL].. to no avail and other sources having similar problems have likewise turned up no solutions. here's the background: A while back I was trying to install a different version of Linux and had the same problems, then had to set the project aside for a bit. I don't think this has anything to do with Linux or Ubuntu per se, but rather Grub.
The system is an old (4-5 years) Dell workstation that has one drive (128 GB) set up for Windows XP and a second new drive (500GB) which I installed for Linux. There is a DVD/CD drive and the system contains no floppy drive at all. In one attempt to get this working I tried modifying the BIOS to indicate there was a floppy drive - this created a failure earlier in the chain with the BIOS failing to load properly, not unexpected, just a shot in the dark at that point.
At the moment I am considering just running out to buy and install a cheap floppy drive to see if that helps. I'll never use the thing though so I'd rather find a solution that doesn't require me to spend money on useless hardware. In any case, here's the /boot/grub/grub.cfg contents:
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
[Code]...
View 1 Replies
View Related
Sep 1, 2009
Nothing is working,[URL] My bootable pendrive is not seen by grub. The tab in grub, e, gives my 3 partitions only
[URL]
View 2 Replies
View Related
Dec 24, 2010
I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?
1.AUTORUN will not run
2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'
3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.
4. Inside the linux folder are three file's, copied and shown below
The first file is entitled :
View 4 Replies
View Related
Mar 6, 2010
I have a Toshiba laptop with BIOS that will not recognize USB as a boot medium (I have purchased two USB 'thumb' drives with Distro's that do boot but the BIOS see them as HDD devices!)I did manage to install and boot a distro from the USB HD but ended up with the USB drive having to be connected' to select any of the OS partions, to boot anything.I do realize that somehow, when installing the new distro on the USB drive, I changed the GRUB configuration to be on the USB drive which obviously I did not want, so can
View 5 Replies
View Related
Apr 7, 2010
I recently scapped XP Pro on an old laptop (Toshiba Portege 7220)as it was so slow and I installed Ubuntu 9.10 - All installed ok and it worked fine for about a month. Last week I switched on, got the Ubuntu splash screen and thats where it stayed. I gave lappy to a friend of mine that knows about Pc's (hahaha). When I got it back he said he'd wiped the HDD and partially installed xp. The install apparantly hung after the reformat and copying files onto it.My problem now is I can't boot from HDD, Ubuntu Live CD or Windows CD - Laptop is set to boot from cd then hdd.When I try to boot from CD, the cd is read as I hear the drive being used also see light for cd flashing, after a while i get a blank screen with flashing cursor in top left corner and the cd stops.If I remove the HDD and put it in external usb caddy I can see the windows folders/files when plugged into my desk top.My questions are :-
1. Is there any way to make the drive reusable as a internal drive again as I know it works as an external drive.I would like to reinstall Ubuntu on it
2. Is it a fault with the laptop itself - how do I check
View 5 Replies
View Related
Jun 25, 2011
I have a laptop with a floppy drive, and it works fine in Windows, but I'm not sure how to use it under Linux. It does not show up in PCmanFM, like my USB-harddrive, but I do have a /dev/fd0, so I tried:sudo mount /dev/fd0 /mntand then it complains about the file system not being specified, so I dosudo mount -t vfat /dev/fd0 /mntbut to no avail.
View 2 Replies
View Related
Aug 6, 2010
I have an external usb connected floppy drive that I cannot mount.#fdisk -1 does not show the drive, in my ignorance I thought that it being a usb it would be recognized the same as flash drives and my external usb ide hdd are recognized.The drive does work, I have tested it in windows computers.Does the floppy need special settings?This may be related or it may be another issue totally:The floppy is recognized in gparted although I cannot format the disc to fat16 or fat 32 as they are greyed out.
View 5 Replies
View Related
Feb 20, 2011
I have an old Compaq Evo P IV, with FC 14 installed. The light on the floppy drive is on all the time and there is no object for it. It has been this way since I installed, but I don't use floppies much (who does anymore), but now I have a need to edit a file on a floppy, for of all things, a Windows system (boot issue
View 5 Replies
View Related
Mar 28, 2010
i dont have floppy drive. i was shocked when i saw that i have.it started when i installed ubuntu and kubuntu..it also appears n my Windows 7 OS.
View 1 Replies
View Related
Jun 1, 2010
I just installed this floppy drive in my computer and I can view files on floppy disks but I can not add files to a disk, formating will not work. All the privileges and ownership are set as root and I can not change them. (But I physically own it) Here is what the privileges are set for:
View 1 Replies
View Related
Aug 7, 2010
I am having trouble trying to use a 1.44 MB floppy drive on my computer. I have tried to mount the drive on my computer, but all I get is the following message:
Unable to mount location No media in the drive
One post mentioned that if I were to type "id" in a terminal, the floppy would be recognized as "25(floppy)". I tried that, but "25(floppy)" didn't come up.
Also, when I tried using KFloppy to format a floppy disk, I got the following message:
Internal error: device not clearly defined
However, when I used the 'lsmod' and "cat /etc/fstab" commands, they strangely seem to recognize that my computer has a floppy.
I am attaching documentation to this post for analysis. This documentation includes information about a failed attempt to format a disk using Disk Utility. Also, I am using Ubuntu 10.04 (Lucid Lynx) as my operating system.
View 5 Replies
View Related
Sep 20, 2010
I still can't access my 3.5" diskette drive under Ubuntu 9.10. What's the secret to making it work?First, to head off some common problems which don't apply here:-There's nothing wrong with the drive. It works fine under Windows XP.-Palimpsest detects the drive is there, but fails to detect media, even with a disk inserted that I know is formatted properly (because I can access it under Windows XP). The drive light does come on when I click "detect media," but nothing else happens.-Doesn't matter what diskette I try.I suspect there is a package which broke floppy drive access with an upgrade (it has happened before, with other things), but I have no idea where to start looking. Didn't find a solution anywhere else either. I can't be the only one to have this problem, so how did you solve it?
View 1 Replies
View Related
Feb 21, 2011
Been using Ubuntu to extend the life of my hard drive. I'm not very familiar with the inner workings of Linux, but I know computers well.
My System:
- Ubuntu 10.04, gnome environment. Dual boot XP.
Problem:
- my external drive, WD essentials 2.2 TB, stopped working recently, about 6 months after installation of dual boot.
Facts:
- still detected, though SMART does not detect it.
- XP still detects it - cant access files though. *
- Ubuntu now detects a floppy drive, which I do not have.
- power still working.
- have tried a few different USB cables.
- happened around the time of several software updates. Maybe paranoia.
- had trouble with music playback.
Hypothesis:
- Drive is dying, cuz XP wont allow me in. *
- Something happened and it rolled back the drivers on the External HD.
- Somehow losing Voltage, though I dont know how. **
Have attempted:
- Disabling Floppy from bios.
- In Windows: disabling XP service pack 3, disabling Firewire 1394.
- Different USB cables. **
- Disconnecting all USB devices, except External HD. **
View 7 Replies
View Related