Ubuntu :: 10.04 Toshiba Laptop Turn Itself On After Few Minutes From Shutdown?
Oct 31, 2010
My Toshiba A300 laptop turns itself on after about 4 minutes from the shutdown. This doesn't happen with Win7. When it turns on, I shutdown using the power off button and it doesn't turn on again. I disabled all the wake options in the BIOS, also I uninstalled the ACPI, but this did not help. I also disabled the WOL in Ubuntu with "sudo ethtool -s eth0 wol d" before the shutdown, but this didn't helped too.
View 8 Replies
ADVERTISEMENT
Jun 22, 2011
Laptop : Dell Latitude D620 - Intel Core2Duo T5500 1.66GHz - Intel 945GM graphic - 2GB DDR2 667 RAM - Samsung 400GB SATA 5400rpm Harddisk. OS : Debian Squeeze amd64 - Gnome. I browse the web with this laptop,with ethernet connection,with Icewesel running 2 tab,just after 5 minutes,it auto turn off itself. Never happen before,I don't know what happen. This laptop only support 2D,there's no 3D graphic driver,so no visual effect apply. I start the laptop after 10 minutes,type sensors and get this output :
acpitz-virtual-0
Adapter: Virtual device
temp1: +46.5°C (crit = +126.0°C)
* Before it auto shutdown,I place my laptop on desk with a simple rack to lift the rear from desk about 5cm,without cooling pad,and no direct wind flow from my desk fan as I always did.
View 1 Replies
View Related
Jan 12, 2010
I got this 1Tb Toshiba external about a month ago, and recently I started really using it to share lots of media files. What I've noticed is that it turns itself off after a few minutes of inactivity -- I researched this issue across the internet, and found that it's between 5 and 30 minutes, depending on who's writing about it.
I found a person who posted a DOS batch file, which (i think) continuously accesses the drive as long as the batch file is running. I'd like to find a way to do that in linux. could someone point me in the right direction?
i took a few minutes to plan it out... i think i need a loop that will access the drive (or do something to it, at least) once every minute until i close the script. I'd also like a message box that shows up that says something like "while this is open, your HDD is being accessed".
View 2 Replies
View Related
Sep 30, 2010
I want to see the scrolling console messages when Ubuntu shuts down instead of the 4 dot splash animation. Is this possible, and how can I do it?
View 1 Replies
View Related
Aug 21, 2015
I am using Debian sid 4.1.3-1 and when i shutdown the system it takes 3 - 5 minutes before actually shutdown, there is only a black screen until the hdd led start flashing and after that the system finally shutdown. The weird part is that sometimes it happen in less than 30 seconds , how can i figure out where the problem is ?
View 8 Replies
View Related
Sep 7, 2010
I have a Saitek Eclipse Keyboard (illuminated keys) and a Logitech MX518 optical mouse. They are both USB.
When I shut down my computer from Windows XP, both the illumination on the keyboard and the optical beam on the mouse turn off. With Ubuntu, both stay on. How do I get them to work correctly?
BTW, I noticed how the spell check on this site recognizes 'Ubuntu' but not 'ubuntu';
View 4 Replies
View Related
Jan 16, 2010
I'm using a Toshiba Satellite A200-21T LapTop with Ubuntu 9.10
I used to have dual boot with windows Xp but i shoot windows out (Sorry bill )
In windows i was able to use bluetooth with my nokia phone.
The wireless hardware button in the laptop is on. There is no option it the bios to turn off the bluetooth, so i'm sure that the machine is booting with bluetooth on.
i run this command in terminal:
Code:
ruival@ruimadlinux:~$ cat /var/log/dmesg | grep Blue*
[ 0.380007] Bluetooth: Core ver 2.15
[ 0.380012] Bluetooth: HCI device and connection manager initialized
[ 0.380014] Bluetooth: HCI socket layer initialized
[Code]....
View 2 Replies
View Related
Jul 25, 2010
I have a Toshiba Satellite A300D which has a normal, Ubuntu 10.04 32-bit and Vista 64-Bit dual boot. My problem is, on Ubuntu, the laptop overheats and crshes very fast, 5-15 minutes. I have the AMD GPU driver activated, and it is all normal, I havent done any tweaks apart from a GRUB tweak, that only lists 1 Linux Kernal at a time.
View 9 Replies
View Related
Jan 3, 2010
I feel I am really really close at getting this connected.
The native ath9k driver did not work. I blacklisted this driver and then proceeded to load a windows driver that came with the card through ndiswrapper.
The system sees my wireless router but I could not get connected to the router. I get the circle of death of it trying to connect though.
I then replaced the Network Manager with Wicd.
I try and connect, after setting the preshared key, and it stops at the very end saying it could not obtain an IP address.
I then try to set a static IP, and at the very end it comes back with, "could not contact wireless access point".
I feel I am so close to getting this connected I just don't know if it is a setting on my router I need to change or to look for a different driver. Driver should be fine but I'm no expert.
I have two other computers wireless'ly connected to this router currently and one of them is connected via a dual boot, Ubuntu and Win7, so at the very least these two computers don't have any issues connecting to the router.
Or I am just going to live with WinXP installed on it instead. BTW: I had no problems getting a wireless connection from this laptop when I had WinXP installed, but I have since wiped it off with a clean install of Ubuntu 9.10. Goes to show how much I want to rid myself of Windows on the laptop.
I even installed 8.04 to see if I could make a connection with that version but to no avail I could not. I have since reloaded 9.10.
View 1 Replies
View Related
Sep 26, 2010
I have a Toshiba Satellite A660-056 which works beautifully except that the built in mic and the headphone jack don't work. For the microphone, no input device is listed in the Sound Preferences control panel. When I plug in headphones, the built-in speakers go quiet but nothing goes through the headphones.
Here's the info
Code:
uname -a
Linux satelliteoflove 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 i686 GNU/Linux
Code:
sudo lshw -C sound
*-multimedia
description: Audio device
product: High Definition Audio Controller
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:01:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0
resources: irq:16 memory:b3000000-b3003fff .....
View 6 Replies
View Related
Mar 8, 2011
I've been struggling a while with getting the iMON LCD/IR-receiver on my Antec Fusion Black case to shutdown together with the system (XBMC Live 10). But it won't. When it's turned off the LCD still lights up the whole room. Many have proposed the "solution" of setting the machine into hibernation instead but that however won't work for me, since I'm unable to suspend my system.
It is the LCD/IR-module that prevents me from suspending and I haven't found a solution to properly unload it on suspending (it's way above my linux knowledge). getting the display to turn off the backlight when the system is turned off.
how to get the eject function to work on my Antec Veris rm200 remote I would be very grateful, I was told about that it could get fixed with irexec but I do not know how since I haven't been able to find a good tutorial on the subject.
View 3 Replies
View Related
Nov 17, 2010
this problem is a well known one as far as I have read, but the solution is yet to come.I formatted and installed OpenSuse 11.3 KDE as the only OS on a PC with 768 RAM, two Hard Disks (6+8 GB), mobo Abit BE6, processor Celeron Coppermine 1100Mhz (with slotket adapter), video card Matrox G400+, Sound Blaster Live! Value.HD 1 is set root and ext4 + 1 GB swap, HD2 is /home ext3.The live OpenSuse CD worked fine, shutdown turns off the power, while the installed one won't. I formatted twice, and the problem persist. Reboot works fine.At shutdown, the hard disks are turned off while the screen and power are still on, so I have to press the power button to turn off completely.
Yesterday I wasted all the day with this problem without solving it, I've read many threads but no solution worked. That PC obviously worked fine with both Windows 98 and XP.Those problems are in the "out of the box" installation, without any setting altered.I've tried disabling ACPI, PM control by APM, and power management features in the bios (latest 2001's Award bios for this old mobo).I've set alternatively pci=noacpi, nosmp, apm=power-off, acpi=force in GRUB options. I've updated the distro. I've set value poweroff for HALT in etc/sysconfig. Nothing changed.I've also tried macumba and ancient celtic cerimonies, yet they didn't work.Is it possible to solve this problem or it's a known unsolved bug? Loading OS screen:Those are the final screens after shutdown where it stops
View 7 Replies
View Related
Mar 25, 2010
get the wireless working on my mum's laptop as having to plug it into the router everytime she wants to go online is now becoming an issue for her. I recently upgraded it from 8.04 to 9.04. Ive tried using the Windows Wireless Driver option in System - Admin but to no avail.
Laptop Toshiba Satellite L300D-13D
$ lspci, returns the following
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
[Code]...
View 9 Replies
View Related
Mar 28, 2010
i want to buy a laptop and stuck between choosing a Dell or Toshiba. Which brand it more reliable and last longer(as in how many years) from your experience or knowledge?
View 9 Replies
View Related
Jul 3, 2010
I have recently installed Ubuntu on my Toshiba Satellite A25-S207 Laptop. Everything runs great except that the resolution will not go above 800x600. I had this problem before on the same laptop and was able to fix it but cannot find the fix now (I had to wipe my laptop clean in order to remove some pesky Windows partitions and reinstall Ubuntu) I have found several "fixes" but none work. I tried the one below as well as it applies almost perfectly to my problem
"I just installed the latest ubuntu 10.04 on a Toshiba-Tecra having "Trident Microsystems Cyberblade XP4m32" Monitor. After install resolution is defaulted to 800x600. I followed a method advised in some threads (arount xrandr and cvt) to increase the size (my laptop works with 1024x768 under XP). This was done OK and I obtained the resolution 1024X768 appearing in the drop list resolution options of the Monitor preferences but when I select the option if fails. Alternatively, when I execute $ xrandr --output default --mode 1024x768_60.00 i got the message "xrandr : screen cannot be larger than 800x600 (desired size 1024X76
I also saw a possible fix proposing to add "HorizSync 31.50-48.00" in Xorg.conf but I then I DO NOT have such a file in my /etc/x11/ after ubuntu install (supposing that this will fix my problem !!!)
Boot into recovery mode, when you get to the command line type:
sudo Xorg -configurewhich will create a default /etc/X11/xorg.conf file. Add the lines:
HorizSync 31.0 - 70.0
VertRefresh 40.0 - 75.0to the Monitor section then reboot."
However when I entered the "sudo Xorg -configure" line my computer spit back saying that "sudo" is not an acceptable command
View 9 Replies
View Related
Jan 8, 2011
I had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
View 3 Replies
View Related
Mar 26, 2011
Capitols v and m not working properly! Toshiba laptop. So far I'm v happy with Ubuntu, works really well! However, I have a madening problem: when typing I cannot use the right hand Shift key with either or if I do, the v looks like $V, and the capitol m ends up giving me a pulldown menu. I assume this is not common to Ubuntu, but maybe it is?
View 5 Replies
View Related
May 15, 2011
I have a Toshiba laptop with dual boot W7 & Ubuntu 11.4. Evolution Mail Program was installed and running perfect. My mistake was to try to import my e-mail contacts address book backup for evolution,ever since I cannot start it as it shows a notification that it is still migrating my files. I have uninstall and install the same program but unfortunately the issue remains and I can no more start my evolution email application.
View 5 Replies
View Related
Mar 1, 2010
Ever since I installed openSuse 11.2, my monitor wont turn off after I shutdown my computer.
The monitor light changes to orange, like its turning itself off. But then the light changes to green and the message "no signal detected" comes on - then the light turns orange. This cycle repeats untill I manually hit the power button to turn it off.
I booted to windows 7 (dual boot), shutdown, but it is still happening!
Like I said, this started happening immediately after I installed openSuse.
View 7 Replies
View Related
Jan 17, 2010
The cooling fan on my Toshiba Satellite m500 doesn't work after installation of ubuntu 9.10. I've looked on the internet but i can't seem to find anything.
View 4 Replies
View Related
Sep 12, 2010
I just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
View 1 Replies
View Related
Sep 1, 2011
I have a Toshiba Satellite A660 laptop with Ubuntu 10.04. I am sure that the internal microphone works because when I reboot into Windows it works fine. It does not work in Ubuntu instead. I tried three things:
1) Action: I checked all the volumes, made sure that the microphone is not muted and selected the proper device as "Analog Stereo Duplex".
Result: no improvements.
2) Action: I installed PulseAudio to better manage the volumes.
Result: no improvements.
3) Action: in the Terminal, I executed the line " sudo gedit /etc/modprobe.d/alsa-base.conf " and then added the line " options snd-hda-intel model=toshiba " at the bottom of the page that opened. I saved, closed and rebooted.
Result: no improvements.
I executed in the Terminal the command " wget [URL]. The link to where data were uploaded is [URL].
View 2 Replies
View Related
Apr 16, 2011
CPU fan apparently is not working with Debian (or Kernel, I don't know who's responsible for ACPI devices management. ).After setting up lm-sensors to show core temperatures, and running a simple "while(true);" C program, I noticed the fan doesn't turn on until the temperature reaches 80 degrees Celsius, and when it does, it runs at what appears to be full speed (VERY noisy). Also, it stays turned on at that speed even after temperature gets below 35 degrees Celsius. The only way to turn it off is to put the computer to sleep and wake it up again, but if I do the same procedure, it happens again.
I think it is related to some compatibility problem with ACPI devices because when I turn on the computer, I can't get the Fn keys to work, but after I suspend and wake it up, I can control the brightness using the Fn key and use the Play, Pause, etc. buttons. I read this has something to do with ACPI issues, the same as the fan control issues, because "try to suspend and wake up the computer" is something people usually tell to others with this problem (I assume just to confirm the diagnostic).Everything works fine on the pre-installed Windows Vista that came with the computer. It's definitely a compatibility problem.
I've read a lot in forums, even here, but I couldn't get any solution for this. I installed toshset but asks me to enable a Kernel module which I have no idea of how to load. I have no idea of how to load a Kernel module in fact.Also, I didn't want to believe, but I read there's no solution for this (at least, not one which doesn't involve a lot of knowledge on the matter).I'd like to stay with Debian, so I'm doing my last try here before installing other Linux Distro. I hope this problem is about Debian and not all Linux distros.My laptop is a Toshiba Satellite L355, Intel Pentium Dual Core T3200. I bought it in the end of 2008, so it's kind of old.
View 6 Replies
View Related
Mar 9, 2010
The sound on my system is really low. I am using a Toshiba Tecra M3 laptop with Intel sound.
Here is my uname info:
Code:
2.6.32.9-67.fc12.i686 #1 SMP Sat Feb 27 10:00:02 UTC 2010 i686 i686 i386 GNU/Linux
I tested both Rhythmbox and Gnome Mplayer. Both are low when using headphones and very low when using the laptop speakers. I checked the alsa configuration via alsamixer -c0 and everything looks good. I have attached my alsa-info.txt file.
View 1 Replies
View Related
Apr 23, 2010
So, help me through getting my audio working properly on my Toshiba Satellite A105-S2081 Laptop. I think I've been through most of the help messages and tried many things to get it working correctly. The ONLY thing that has helped is to go to /etc/modprobe.d/alsa-base.conf and change model=auto to model=generic. (options snd-hda-intel power_save=10 power_save_controller=N model=generic)
I've tried model=toshiba, model=auto, model=lenovo, model=3stack, model=dallas and the laptops internal sound device disappears from the list of sound devices. If I plug in my Logitech Headset, it seems to work fine.It also seems to work fine if I boot it up into XP SP3.It does work now generally with model=generic, but not sure that everything works properly, like the headset & microphone jack. (Actually the reason I have the Logitech Headset is because the headset jack doesn't work).
View 6 Replies
View Related
May 8, 2010
I have a new laptop that I can install ubuntu on without hassle using a cd. I wanted to put it on my older Toshiba laptop (2003) for my little cousin to use to get on the internet and play games. When I boot from the CD the ubuntu logo comes up runs. It ask me my language then goes to the screen where I can choose "Try Ubuntu without installing it" "Install Ubuntu Now" etc. Ive tried clicking both install and try both launch the ubuntu logo it runs for about 4 min and then hangs on a black screen. I know it isn't the cd because I can use it on any other computer and it works. This Toshiba cannot boot from a jump drive though so that choice is out.
View 3 Replies
View Related
Sep 16, 2010
I'd like your input on this. A toshiba laptop screen goes blank after few seconds(from turning on).
At first i thought it was fan that was out and once it got hot enough it cut the laptop off like my old Acer did.
But after close examination i noticed that it continues working. HD still spining and fan blows..
Example: Turn on>Hit F2 to go in to Bios> Bios screen appears>Before i have a chance to do anything it geos blank but continues working> I hit Cntrl ALt Del> it resets and screen comes right back up>second later it goes blank again.
ALSO the toshiba logo and whole screen seems to have a red tint to it.
I also get a media test error but that is likely from hard drive not being there during some of the tests.
DO you think it can be an LCD Backlight issue? or possibly video card?
View 5 Replies
View Related
May 4, 2010
Just resently I managed to activate internal bluetooth adapter. I'm not expert in command line and everything I could was done in GNOME. Same like most other systems an icon appears in panel bar whenever I used to type <modprobe omnibook ectype=14>. It took me some time to set everything with the kind help from URL... So the thing is that after fingering with some newly installed packages concerning b-tooth utilities that icon is gone and b-tooth is not active.
View 2 Replies
View Related
Jun 7, 2010
I did a clean install of Fedora 13 on my Toshiba A500 laptop. Suddenly the keypad stops working. no numbers?
View 2 Replies
View Related
Jan 3, 2010
Running OpenSuse 11.2 from live dvd. When it starts up, the screen gets filled with vertical green and black lines, with about a 1 inch square in the middle that moves as the cursor. Nothing else is visible.I've tried each of the video options, with the same result. Is there any solution to this?
View 1 Replies
View Related
