CPU fan apparently is not working with Debian (or Kernel, I don't know who's responsible for ACPI devices management. ).After setting up lm-sensors to show core temperatures, and running a simple "while(true);" C program, I noticed the fan doesn't turn on until the temperature reaches 80 degrees Celsius, and when it does, it runs at what appears to be full speed (VERY noisy). Also, it stays turned on at that speed even after temperature gets below 35 degrees Celsius. The only way to turn it off is to put the computer to sleep and wake it up again, but if I do the same procedure, it happens again.
I think it is related to some compatibility problem with ACPI devices because when I turn on the computer, I can't get the Fn keys to work, but after I suspend and wake it up, I can control the brightness using the Fn key and use the Play, Pause, etc. buttons. I read this has something to do with ACPI issues, the same as the fan control issues, because "try to suspend and wake up the computer" is something people usually tell to others with this problem (I assume just to confirm the diagnostic).Everything works fine on the pre-installed Windows Vista that came with the computer. It's definitely a compatibility problem.
I've read a lot in forums, even here, but I couldn't get any solution for this. I installed toshset but asks me to enable a Kernel module which I have no idea of how to load. I have no idea of how to load a Kernel module in fact.Also, I didn't want to believe, but I read there's no solution for this (at least, not one which doesn't involve a lot of knowledge on the matter).I'd like to stay with Debian, so I'm doing my last try here before installing other Linux Distro. I hope this problem is about Debian and not all Linux distros.My laptop is a Toshiba Satellite L355, Intel Pentium Dual Core T3200. I bought it in the end of 2008, so it's kind of old.
Just resently I managed to activate internal bluetooth adapter. I'm not expert in command line and everything I could was done in GNOME. Same like most other systems an icon appears in panel bar whenever I used to type <modprobe omnibook ectype=14>. It took me some time to set everything with the kind help from URL... So the thing is that after fingering with some newly installed packages concerning b-tooth utilities that icon is gone and b-tooth is not active.
I have recently installed the intel-wireless-tools and now my laptop detects my wireless router and connects to it but when I go into a browser I can access the internet. If I connect to the wired network no problems(same router) no go on Wireless.
Why isn't my laptop's wired ethernet not showing? I have a Toshiba Satellite PSAG8U-04001W.
The installation of Debian wasn't originally on this system: it was on an older laptop whose motherboard fried, so I rescued the hard drive as well as the Debian installation. However, I doubt this should have anything to do with lspci not even detecting the wired eth controller.
First issue is, now that I am running Debian "Squeeze", my laptop runs much hotter than before. Its definitely hot on the very bottom compared to when running Windows. Once the system begins to heat up, the fans start spinning faster, the system gets louder, etc.
Second issue is battery life. I am able to get 5 hours out of the laptop in Windows, but maybe 2.5 hours in Debian. I am assuming that these two problems go hand in hand. Now from experience with PC hardware, I know that the newer chips scale their frequency and voltage depending on demand. I don't think the computer is doing this correctly when running Linux.
By running cat /proc/acpi/processor/CPU0/throttling
I see that the CPU(s) are in T0 state (or 100%). Manually setting the frequency doesn't change anything either (via the gnome applet). Am I diagnosing this correctly?
The sound on my system is really low. I am using a Toshiba Tecra M3 laptop with Intel sound.
Here is my uname info: Code: 184.108.40.206-67.fc12.i686 #1 SMP Sat Feb 27 10:00:02 UTC 2010 i686 i686 i386 GNU/Linux
I tested both Rhythmbox and Gnome Mplayer. Both are low when using headphones and very low when using the laptop speakers. I checked the alsa configuration via alsamixer -c0 and everything looks good. I have attached my alsa-info.txt file.
I feel I am really really close at getting this connected.
The native ath9k driver did not work. I blacklisted this driver and then proceeded to load a windows driver that came with the card through ndiswrapper.
The system sees my wireless router but I could not get connected to the router. I get the circle of death of it trying to connect though.
I then replaced the Network Manager with Wicd.
I try and connect, after setting the preshared key, and it stops at the very end saying it could not obtain an IP address.
I then try to set a static IP, and at the very end it comes back with, "could not contact wireless access point".
I feel I am so close to getting this connected I just don't know if it is a setting on my router I need to change or to look for a different driver. Driver should be fine but I'm no expert.
I have two other computers wireless'ly connected to this router currently and one of them is connected via a dual boot, Ubuntu and Win7, so at the very least these two computers don't have any issues connecting to the router.
Or I am just going to live with WinXP installed on it instead. BTW: I had no problems getting a wireless connection from this laptop when I had WinXP installed, but I have since wiped it off with a clean install of Ubuntu 9.10. Goes to show how much I want to rid myself of Windows on the laptop.
I even installed 8.04 to see if I could make a connection with that version but to no avail I could not. I have since reloaded 9.10.
I have a Toshiba Satellite A660-056 which works beautifully except that the built in mic and the headphone jack don't work. For the microphone, no input device is listed in the Sound Preferences control panel. When I plug in headphones, the built-in speakers go quiet but nothing goes through the headphones.
Here's the info Code: uname -a Linux satelliteoflove 2.6.32-24-generic #43-Ubuntu SMP Thu Sep 16 14:17:33 UTC 2010 i686 GNU/Linux
Running OpenSuse 11.2 from live dvd. When it starts up, the screen gets filled with vertical green and black lines, with about a 1 inch square in the middle that moves as the cursor. Nothing else is visible.I've tried each of the video options, with the same result. Is there any solution to this?
get the wireless working on my mum's laptop as having to plug it into the router everytime she wants to go online is now becoming an issue for her. I recently upgraded it from 8.04 to 9.04. Ive tried using the Windows Wireless Driver option in System - Admin but to no avail.
Laptop Toshiba Satellite L300D-13D $ lspci, returns the following 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [Code]...
I have recently installed Ubuntu on my Toshiba Satellite A25-S207 Laptop. Everything runs great except that the resolution will not go above 800x600. I had this problem before on the same laptop and was able to fix it but cannot find the fix now (I had to wipe my laptop clean in order to remove some pesky Windows partitions and reinstall Ubuntu) I have found several "fixes" but none work. I tried the one below as well as it applies almost perfectly to my problem
"I just installed the latest ubuntu 10.04 on a Toshiba-Tecra having "Trident Microsystems Cyberblade XP4m32" Monitor. After install resolution is defaulted to 800x600. I followed a method advised in some threads (arount xrandr and cvt) to increase the size (my laptop works with 1024x768 under XP). This was done OK and I obtained the resolution 1024X768 appearing in the drop list resolution options of the Monitor preferences but when I select the option if fails. Alternatively, when I execute $ xrandr --output default --mode 1024x768_60.00 i got the message "xrandr : screen cannot be larger than 800x600 (desired size 1024X76
I also saw a possible fix proposing to add "HorizSync 31.50-48.00" in Xorg.conf but I then I DO NOT have such a file in my /etc/x11/ after ubuntu install (supposing that this will fix my problem !!!)
Boot into recovery mode, when you get to the command line type:
sudo Xorg -configurewhich will create a default /etc/X11/xorg.conf file. Add the lines: HorizSync 31.0 - 70.0 VertRefresh 40.0 - 75.0to the Monitor section then reboot."
However when I entered the "sudo Xorg -configure" line my computer spit back saying that "sudo" is not an acceptable command
My Toshiba A300 laptop turns itself on after about 4 minutes from the shutdown. This doesn't happen with Win7. When it turns on, I shutdown using the power off button and it doesn't turn on again. I disabled all the wake options in the BIOS, also I uninstalled the ACPI, but this did not help. I also disabled the WOL in Ubuntu with "sudo ethtool -s eth0 wol d" before the shutdown, but this didn't helped too.
I had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
Capitols v and m not working properly! Toshiba laptop. So far I'm v happy with Ubuntu, works really well! However, I have a madening problem: when typing I cannot use the right hand Shift key with either or if I do, the v looks like $V, and the capitol m ends up giving me a pulldown menu. I assume this is not common to Ubuntu, but maybe it is?
I have a Toshiba laptop with dual boot W7 & Ubuntu 11.4. Evolution Mail Program was installed and running perfect. My mistake was to try to import my e-mail contacts address book backup for evolution,ever since I cannot start it as it shows a notification that it is still migrating my files. I have uninstall and install the same program but unfortunately the issue remains and I can no more start my evolution email application.
One of the big problems I'm having is with the Network Adapter. It won't work with Ubuntu or any Ubuntu based distros. Backtrack 4 won't even start for me (there's a problem with the ACPI, and I'm not sure how to turn it off on Backtrack). Is there any distribution that I won't have to mess with the Kernels too much (I tried Gentoo, but that was a bit over my head)
Off and on for some time now I've been using a Toshiba x205-s9359 laptop with (11.4/KDE4.6) during the day as a general purpose laptop using the onboard LCD and in the evenings to run XBMC to play movies on a TV using an HDMI cable (no cable TV on our little island & Satellite TV is poor in the rainy season).
The video card is an NVidia GeForce 8700M GT with NVidia's proprietary driver v. 275.09.07 (installed the "hard way").
Code: ~> aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0
Now the Audio/Video both go to the TV via HDMI if it's connected prior to boot, if not the laptop works normally.
If you try this with XBMC don't forget to go to set the XBMC settings to "HDMI" as needed.
I just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
I have a Toshiba Satellite A660 laptop with Ubuntu 10.04. I am sure that the internal microphone works because when I reboot into Windows it works fine. It does not work in Ubuntu instead. I tried three things:
1) Action: I checked all the volumes, made sure that the microphone is not muted and selected the proper device as "Analog Stereo Duplex". Result: no improvements.
2) Action: I installed PulseAudio to better manage the volumes. Result: no improvements.
3) Action: in the Terminal, I executed the line " sudo gedit /etc/modprobe.d/alsa-base.conf " and then added the line " options snd-hda-intel model=toshiba " at the bottom of the page that opened. I saved, closed and rebooted. Result: no improvements.
I executed in the Terminal the command " wget [URL]. The link to where data were uploaded is [URL].
It feels like it is a keyboard problem because the symptoms always show after pressing a key.
In most instances, a line I am typing in "gedit" at the correct place in the text is unexpectedly continued a few lines downward even though no arrow key has been pressed. In another instance, I click "new thread" in Linuxquestions, a new window opens asking for a title, after entering the title I click "Click Here to Find Similar Threads", a new smaller window opens on top of the existing one and shows the existing options but as soon as I select (click on) one of these options, the main Linuxquestions window disappears and there is no option of "going back" to it and no "back" button to click.
If the keyboard needs cleaning, how do I do that? I found a few cleaning hints about separate keyboards but nothing about laptops.
I have a Toshiba A205 S5804 laptop that had Vista Home Premium installed. Tried to install Centos 5 (2.6.18-8-el5) and when I went through the install process, X Server failed to start so I had to go thorough the command line install. Once the install completed, it only booted to console.
The default resolution for this laptop is 1280X800 but I dont know if that is why or not. if anyone has a clue about my issue, please let me know.. I really dont want to install windows.
I have Toshiba Satellite L305-S5907 laptop with Microsoft Vista.I tried installing Fedora 9 on my laptop but GUI is not loading on it,system will try to load GUI and showing different colors of lines and screen blinks continously , but desktop is not loading .
Laptop Monitor specification is 15.4� diagonal widescreen TruBrite� TFT LCD display at resolu1280x800 native resolution (WXGA).Except GUI everything is working fine.I tried startx command but then also same scenario is happening. Graphics details: Mobile Intel Graphics Media Accelerator 4500M with 128MB-1759MB dynamically allocated shared graphics memory
I have a Toshiba A665-S6092. Core i7 CPU and I installed a Kingston SSD so it's up to the job. It supposedly has keyboard backlight but I can't figure out how to get that function functioning. Now, I know this ain't real important but I have a feeling other people might like to have that too so I'm asking. Does anybody in Fedora Land have any experience getting Toshiba keyboard backlight working? Maybe I'm wrong about it having this option, I can't find any mention of it using all the tools at my disposal. lspci, the Gnome device lister, xorg keyboard config, etc. Apparently everything except the right thing. I've Googled until I'm Googleyed and searched this forum and LinuxQuestions.org (which seems to have been hijacked by Slackware fanatics over the last few years) and other forums like JustLinux, Linux.com. I can't remember them all. I've looked through source code that I could make no sense of and wondered why I was pretending to be qualified to do that until I realized how important this has become to me, although it is as I said a relatively trivial matter. If anybody knows and wants additional information I'll be more than happy to supply it. I'm running the default kernel for Fedora 14 64 bit, 220.127.116.11-45.fc14.x86_64.
So, help me through getting my audio working properly on my Toshiba Satellite A105-S2081 Laptop. I think I've been through most of the help messages and tried many things to get it working correctly. The ONLY thing that has helped is to go to /etc/modprobe.d/alsa-base.conf and change model=auto to model=generic. (options snd-hda-intel power_save=10 power_save_controller=N model=generic)
I've tried model=toshiba, model=auto, model=lenovo, model=3stack, model=dallas and the laptops internal sound device disappears from the list of sound devices. If I plug in my Logitech Headset, it seems to work fine.It also seems to work fine if I boot it up into XP SP3.It does work now generally with model=generic, but not sure that everything works properly, like the headset & microphone jack. (Actually the reason I have the Logitech Headset is because the headset jack doesn't work).
I have a new laptop that I can install ubuntu on without hassle using a cd. I wanted to put it on my older Toshiba laptop (2003) for my little cousin to use to get on the internet and play games. When I boot from the CD the ubuntu logo comes up runs. It ask me my language then goes to the screen where I can choose "Try Ubuntu without installing it" "Install Ubuntu Now" etc. Ive tried clicking both install and try both launch the ubuntu logo it runs for about 4 min and then hangs on a black screen. I know it isn't the cd because I can use it on any other computer and it works. This Toshiba cannot boot from a jump drive though so that choice is out.