Hardware :: What About SDXC Memory Cards?

Sep 13, 2010

Yes i read about Tuxera and their solution for embedded system even on linux but don't exist some project free?In the 3.0 specification, the electronic interface of SDHC and SDXC cards is the same. The decision to label cards with a capacity greater than 32GB as SDXC and to use a different filesystem is due solely to the limitations in creating larger filesystems in certain versions of Microsoft Windows. Other operating systems, such as Linux, make no distinction between SDHC and SDXC cards, as long as the card contains a compatible filesystem.So essentially is possible use this memory card as mass storage but if you want use it for manage data taken using photo camera or video camera (that use exFat, the propetary file system of microsoft), don't exist any open solution for linux?

View 3 Replies


ADVERTISEMENT

Ubuntu :: Format Flash Drives/memory Cards ?

Jan 4, 2010

how to format flash drives in ubuntu. In windows there was a "format" on the right click menu but I did not find one in ubuntu. i am using ubuntu jaunty.

View 4 Replies View Related

General :: Any Real Alternative To CPRM-protected SD Memory Cards Beside USB Flash Drives?

Apr 19, 2010

Before buying an SD memory card, I'd like to know something more about the CPRM protection, in particular:Does CPRM influence the way I am supposed to access my own data? That is, does CPRM encrypt it? Could CPRM prevent me from accessing my own data?Is it possible to disable or eliminate CPRM from either the memory card or the card reader?Are there manufacturers selling CPRM-free SD memory cards?Is there any real alternative to CPRM-protected SD memory cards beside USB flash drives?Is Linux support for SD cards good?

View 1 Replies View Related

General :: SDXC Driver In Kernel 2.6.24

Feb 13, 2011

I have given the task of writing a SDXC(32GB~2TB) driver for Kernel 2.6.24. I have following queries..

1> Does Linux Kernel 2.6.24 supports SDXC??? or SDHC(4GB ~ 32GB)..I know i surely supports SD...

If i need to modify the driver for SDXC what changes i need to do..Any pacthes are available?? which files need to be modified... whether driver/mmc/host/sdhci.c???

1> The SDIO host controller is implemented in FPGA in our board, & the Processor to FPGA interfacing is through PCIe.. I am not able to understand this interfacing.. what PCI related functions i need to use... I Have the Device ID & Vendor ID of Host controller...

View 2 Replies View Related

Ubuntu Servers :: Dns Server Started With 2 NIC Cards - Bios Sees Both Cards But - Both Dont Show In Ifconfig

Dec 1, 2010

I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?

View 1 Replies View Related

General :: Application Virtual Address Space Memory Allocation - Memory Does Not Get Free

Apr 20, 2010

I am using malloc and frees a lot in my program. It shows its allocated but when i remove it doesnt show as the memory is removed(I am using the top command to view VIRT memory usage). If this continously grows what would happen to my program (Will it go out of memory?)

View 4 Replies View Related

Fedora Hardware :: Checking Computer Memory - Specification Shows 2 GB Of Memory Instead Of GB

Feb 7, 2011

Fedora 14 xfce
HP Mini 210

I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:

[Code].....

View 3 Replies View Related

General :: Ubuntu - Memory Full, Process Memory Usage Doesn't Add Up In Top?

Mar 18, 2011

I have a computer with 16GB of ram. At the moment, top shows all the RAM is taken, (NOT by cache), but the RAM used by the various processes is very far from 16GB.I have seen this problem several times, but I don't understand what is happening.My only remedy so far has been to reboot the machine.

View 1 Replies View Related

Server :: Clear Cache Memory ( RHEL 5.1 ) As It Consumes Almost 100% Physical Memory?

Jan 11, 2010

let me know how to clear cache memory ( RHEL 5.1 ) as it consumes almost 100% physical memory.

View 3 Replies View Related

Software :: Free Database That Has Low Memory Usage And Innodb And Memory Like Engin

May 3, 2011

I am looking for free database that has low memory usage and innodb and memory like engins that has C API and support trigger and client/server support for using in embedded linux systems.

View 8 Replies View Related

Programming :: Memory Leaks - Glibc Detected - ./SuffixTree: Malloc() - Memory Corruption - 0x00

Mar 21, 2011

I am new to C and linux. My code below does arbitary writes but I cant figure out where or how it does it.

I am calling the insertNode() function with seq = 'MISSISSPPI$' and alphabets = 'ABCDEFGHIJKLMNOPQRSTUVWXYZ$'

Code:

Weird behaviour I should mention is that when I check for NULL pointer in node->child[index], the unassigned values are not null anymore, they point to arbitary memory.

View 12 Replies View Related

OpenSUSE Install :: Virtual Memory / Resident Memory Of Server?

Feb 3, 2010

we found that if we use 'top' to show the memory usage of a server (SuSe Linux 10), we can get virtual memory usage as well as 'Resident memory' usage. For virtual mem or a particular process, it is around 1.1GB, which is large but for resident memory, it only consumes 300MB. Are there anyone who knows what the differences are? I would also like to know whether the difference (1.1GB - 300MB) = 800MB are actually available for use by other applications in the system.

View 1 Replies View Related

Ubuntu :: Memory Error When Installing Python - Cannot Allocate Memory

Apr 19, 2010

I get this error when I run "sudo apt-get install python-software-properties"

Preconfiguring packages ...
dpkg: unrecoverable fatal error, aborting:
fork failed: Cannot allocate memory
E: Sub-process /usr/bin/dpkg returned an error code (2)

I'm trying to install deluge via ssh and my vps has 512mb ram and is only using 11% of it prior to running the code.

View 2 Replies View Related

Programming :: Write A Script That Can Show Me Total Memory Vs Used Memory?

Apr 13, 2010

How do I write a script for my Linux that can show me total memory vs used memory and have it email me results if it's over 70 percent?

View 2 Replies View Related

Hardware :: Why Dmesg / Grep Memory Gives Two Different Physical Memory Amounts

Oct 20, 2010

I am monitoring physical memory in a server I administer, and my hardware provider told me they had increased physical memory size to 4Gb... However, using several tools (free -m; top; dmesg | grep Memory; grep MemTotal /proc/meminfo I discovered that I actually have 3Gb, not 4... But, my doubt comes from the fact that dmesg | grem Memory tells me I have 3103396k/4194304k available The first number is effectively 3Gb, but the second one, is 4! so, why I am looking at this two different numbers?

View 1 Replies View Related

Ubuntu :: Memory Leak / Some Process Eating All Memory

Jan 29, 2011

I have had a fresh install of Ubuntu 9.10 and installed some software after that.Since third some, some process is eating half of my memory.I have checked processes running in system manager but everything is normal.Maximum is consumed by compiz which is about 26 mb, seems very normal.I did restarted my computer several times, and in the start for 5 mins, its fine after that again my cpu fans runs at very fast speed and my one cpu is used up 95 % (I have dual core).Please help me out, this invisible thing is driving me crazy.I am attaching my htop screen shot (sorted by cpu %), now the cpu is not used by completely but fan is still struggling hard and fast.

View 9 Replies View Related

Software :: Accessing Memory Address Outside Standard Memory

Nov 22, 2009

I am writing an application that wants to access periphals registers outside the standard (allowed) memory area.

Doing so gets me "segmentation fault".

I know, this is natural behaviour.

One way of getting around this is writing the module which has to be loaded by linux. I will consider this some time later.

For now, I want to come to some quick result and allow linux or gcc compiler to write to those memory areas of periphals. Is there a direct way to do so?

View 3 Replies View Related

Programming :: SHM Memory Counted As Cache Memory With Kernel 2.6.18?

Aug 25, 2010

Is that possible that SHM shared memory is counted as cache memory on Linux with kernel 2.6.18?If find it really odd since this memory is not file backed, but I have a piece of code that loads data using shm_open+mmap, and it generates an amount of cache memory in /proc/meminfo that corresponds exactly to the amount of shared memory (I load that data from a file but I am using posix_fadvise(fd,0,0,POSIX_FADV_DONTNEED) to ensure this file is not cached and I made sure that it is working as expected). As far as I know SHM memory was not tagged as cache memory with kernel 2.6.9.If it is the case it is really unfortunate since normally cache memory can be considered to be part of the "available" memory since it can be flushed promptly but this is clearly not the case with SHM memory... Is there an easy way to get the total amount of used SHM memory on a system?

View 4 Replies View Related

General :: Memory Corruption Detected In Low Memory

Aug 22, 2010

This is my first post in these forums. I'm still quite new to Linux (using Mint 9) so please bear with my not-very-articulate question(s)When I boot up and open up a tty terminal I get a message saying "Memory corruption detected in low memory." I've done an extensive google search about the issue and it seems not uncommon. I ran a memtest with no errors returned, so I'm sure that there's nothing really wrong with the memory; apparently it's a bug in the kernel that's causing this.

View 2 Replies View Related

General :: Top Used Memory Versus Ps Processes Memory

Jan 17, 2010

I found from command 'top' that 8GB memory are used. However, using command 'ps' with some options to grep the running processes and then summing up the memory used by the running processes are less than 2 GB. Where has the used memory gone ?

View 7 Replies View Related

Server :: SFTP Memory Error / Getting An Out Of Memory?

Jan 8, 2011

I have been setting up a vps I got out with bhost.net, with CentOS installed. I've been learning and have set up everying I need with the exception of ftp/sftp.

Using yum I installed vsftpd and ran into problems, thinking it was something I might of done I did a fresh install of CentOS and I still recieve the same problem on a fresh install so it is nothing I have done to the server.

The problem is when connecting via a sftp client I get an out of memory error. This error is listed in the putty faq ( url ) under A.7.5, there is a brief explaintion of the cure under A.7.6.

there is mention of a login script but I don't know where this is located. I'm a novice at Linux but by no means incompotent when it comes to computing.

View 5 Replies View Related

Server :: Having A Query Regarding Top And Virtual Memory - VIRT Mem More Than Actual Available VIRT Memory

May 4, 2010

I have a query regarding top & virtual memory. When we run top it show VIRT (Virtual Mem), RES (Resident Mem) & SHR (Shared Memory). The total virtual memory of my machine is 4 GBs (2 GB RAM + 2 GB Swap), but still I am able to see a process showing 4000m virtual memory column. what it means, as its show VIRT Mem more than actual available VIRT memory

View 1 Replies View Related

OpenSUSE :: Open Files From Memory Stick The Memory Stick Is Not Available?

Mar 21, 2011

When I start bluej and try to open files from my memory stick the memory stick is not available. Is there any way that I can open files directly in bluej from my memory stick.

View 3 Replies View Related

Ubuntu :: Freezes Due To TWO RAM CARDS?

May 18, 2010

I am new here, and clueless as to what im doing. Soo.. I installed Ubuntu 10.04 i386. It took me forever to install because it would hang up (Mouse lock and light go off, keyboard lock, screen lock) every time i got to the graphical part of the installer, so i used the alternate installer. After installing correctly, it would still lock up within 3 minutes of login. Now that ive removed one stick (512) of ram, there are no more problems.

Here is my comp config:

Installer: ubuntu-10.04-alternate-i386
Processor: AMD Athlon 64 3200+
Motherboard: Albatron K8T800
Ram: 1 gig Corsair ram(2 x 512) **Note, I removed one to get the comp to work, so its actually 512 now.
Video: Nvidia Geforce 6800gt

Both sticks of ram are the same so it is not because of mix and matching ram.

View 1 Replies View Related

Ubuntu :: How Well TV Cards Work

Dec 27, 2010

how well TV cards work in Ubuntu.I want to know what are the best prices, what works in Ubuntu and whether or not they will "lag" with video.Problem is my television just packed in, Rather than get a new one I'd rather just get a PC card because it'd be more practical with the room I have.

View 2 Replies View Related

Ubuntu :: Use Only One Of Two Graphics Cards?

May 9, 2011

My situation is like so: I have two NVIDIA GTX 460 graphics cards running the latest (260.19.06) proprietary drivers. I SLI these together under Windows 7 for gaming. However, for day to day usage I have Ubuntu 10.1 running on my two monitors using twinview.

My problem is that the xserver refuses to load (I get the "screens found, but none have a usable configuration" error) when both my graphics cards are plugged in and powered; if I remove the power to one, the system works fine. If I was just using Ubuntu, I would simply leave one unplugged but, because I'm not, its a pain to have to plug/unplug one every time I want to switch operating system.

I have tried every modification to the xorg.conf file that I can think of and a few more found in the documentation and via google, all to no avail. I have also tried everything again with twinview disabled and only one monitor plugged in.

I am aware that SLI isn't compatible with twinview, I don't really need to use it, although it would, of course, be nice.

View 3 Replies View Related

Ubuntu Networking :: Using 4 NIC Cards?

Jul 13, 2011

I am setting up a class using a vmWare ESX server. Because of security proceedures, the students are not allowed to connect directly to the internet. Because of file space, the are severated on 3 servers. I am trying to set up a server that connects to the internet and all 3 subnets that the students are on.

I have configure 4 virtual NICs 1 with DHCP connected to the internet. The other 3 goes to each student network. I can get 2 working at a time. 1 using the DHCP and 1 of the other networks. It seems to be order dependent. On the main server I can ping the local address. When I ping the students systems, I can reach 1 but not the other 2. I get a host unreachable message.

Is there a limitation to 2 NICS. If not, is there any magic incantation to run the 4 nics?

View 4 Replies View Related

Ubuntu :: PCI Video Cards?

Jul 5, 2009

I am looking into buying a better graphics card, most likely Nvidia, for my HP D330 DT.How do you tell if the graphics card is compatible with your machine?One more thing, is there a way to tell if my GPU is an, AGP, PCI, or PCI express without opening my computer??

View 9 Replies View Related

Ubuntu :: ATI Old Cards Don't Work

Apr 30, 2010

I understood some ATI old cards don't work on Ubuntu in games because of 3d accelerators etc.my lspci output is: VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]

View 3 Replies View Related

Software :: Overclocking ATI Gfx Cards?

Nov 2, 2010

I'd like to overclock (well actually downclock) ATI X300 video card in Debian. Is it possible to do it with standard drivers, or fglrx must be used?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved