Hardware :: Using An External HD With A Wifi Router With USB?
Jan 26, 2010
I am using Ubuntu 9.10 and have been seeking a method where I can backup photos and Open Office documents. Data is currently on both Karmic and an XP laptop sharing certain info. What I had thought was to have an old system act as a server for the purpose. I have been looking at various forums and see reference made to using SSH and another to using a wireless router that has a USB connection and an external HD. I think that my old system would be noisy and as space is a problem I see difficulty in keeping the noise down particularly as none of the cupboards have power points. I think that having to keep switching on and off would defeat the purpose of it acting as a server.
The option of using the wireless router looks good from the point of view that as the router is always on then the external HD would be also. What concerns me is how this would operate. Will I require to load Karmic on to the HD also how do I access the drive to let me work with it. I would appreciate guidance on using an external HD as I am under pressure to ensure that all data is fully backed up as XP has let us down in the past.
View 3 Replies
ADVERTISEMENT
May 13, 2009
the only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
View 4 Replies
View Related
Sep 1, 2011
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
View 2 Replies
View Related
Feb 16, 2010
I have been experiencing slight problems while attempting to connect to the internet via a wireless router. I can connect to my router perfectly fine on Vista and I could connect to my friends router while I was in Ubuntu, but I can't connect to my router while on Ubuntu. I've been entering the same code that will work when I'm in Vista, but it wont work while in Ubuntu.
View 7 Replies
View Related
Jan 30, 2010
I installed f12 and I want to connect to my wifi router with password. little bit ?I try to set a new wifi connection but I cannot activate it
View 6 Replies
View Related
Aug 9, 2010
My isp gave me a router which has wifi.
I added an ubuntu box acting as a router, so the layout is this:
Now, the lan has 192.168.2.0 subnet, and the external interface of the router is in the 192.168.1.0 subnet
So the problem is that the wifi assigns 192.168.1.0 ip's which doesnt belong or get filtered through my router/firewall...
View 9 Replies
View Related
Mar 15, 2011
I think I have unique problem. I have a d-link DWL G510 rev c.(Austrailian) WiFi card in my pc which is detected as
Quote:
Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302] in lspci -nn.
iwconfig shows:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=6 dBm
Retry long limit:7 RTS thrff Fragment thrff
Power Managementff
ppp0 no wireless extensions.
Now sometimes it detects my wifi router and shows its ssid in nm-applet. but when I try to connect, it tries for 3 or 4 minutes and then fails. for most of time it even does not finds my router.
View 1 Replies
View Related
Jun 17, 2011
I have a Dell Studio XPS15 laptop running 11.04 which works flawlessly with my router (it's a broadcom card btw). Now I'm setting up a new laptop for my Father-in-law which is a Dell Inspiron 15 which has intel Centrino 1000 wireless. I've installed and setup 11.04 on it. Everything runs great except..
Now it can see all the access points around so I assume the wireless card is properly detected and working. But when I try to log into my router and give it my password, it just keeps trying to connect and can't. I've double checked the settings with my own laptop and everything seems the same. why it won't log in? I'm leaving it as a dual boot with Win7 and I know that Win7 will log into the same router with the same password.
View 4 Replies
View Related
Aug 7, 2011
I am spending a week in my grandparents house and I forgot my router. So is it possible to share the Ethernet connection I have with my phone using my laptop's wifi without a router? I think (I have very little knowledge about wireless networks )something like ad hoc network should do the trick? If so how do you set it up?
View 4 Replies
View Related
Sep 29, 2010
I installed PCLOS 2010.07 into my laptop and dual booting with windows vista. Now I got a weird problem that is when I connected linux to my wifi router, it cannot obtain IP! (it still work correctly in windows, problem just with linux) I had to manually set ip and that worked. Now i wonder what is happening, because I didn't see this problem with PCLOS 2009 borrowed from my friend few months ago.
View 4 Replies
View Related
Sep 9, 2010
I updated a firmware of my wifi router (small black box with antenna). The router is managed via web browser at address 192.168.1.100. I opened Mozilla Firefox connected to the router, but a 'home.asp' application - an interface one can to set up a configuration - running on the router didn't work properly. When I tried to change some settings, and eg. clicked a confirmation button nothing happened. I solved the problem staring Windows and making a connection using IE - this time that home.asp application did OK. The question is what may caused problems? A bug in this app or in general *.asp applications don't communicate well with browsers other than IE or simply they don't 'like' Linux?
View 7 Replies
View Related
Jun 16, 2011
I am trying to get an arp packet from my wireless wifi router (access point), to which I am not connected. I simply tried ping 192.168.0.1, but the answer was connect: network is unreachable. What can I do about that?
View 1 Replies
View Related
Jun 29, 2010
I recently began using fedora (13) on my acer laptop, and at first the WiFi was fine. However, after a day, it wouldn't connect to my SpeedTouch router through WiFi (though it works fine with a cable), however, it works fine with my Philips Router WiFi.
View 1 Replies
View Related
May 12, 2010
I've got an Ubuntu box set up as a router and wifi hotspot. I can access the internet and any website using this box. I can connect a laptop to my wifi access point, and connect to both the router box and the internet. I'm writing this message from it. If I access either hsbc Hong Kong internet banking or speedtest.net from my laptop I can't connect. Every other site I've tried is fine. What could be causing this? I don't know where to start. I've set up the firewall rules and routing tables, so I vaguely know what I'm doing... but clearly not enough to debug this issue.
View 3 Replies
View Related
Sep 7, 2010
Is there a way to see the manufacture of wifi router/card remotely like "inSSider" shows, for example ???
View 2 Replies
View Related
Nov 11, 2010
trying to run 10.04 netbook live from a memory stick with a view to installing it on my laptop. However although I can see my wireless router and connect to it I cannot access the internet. I have tried this on my laptop and desktop with the same result. I was however able to download Seamonkey browser using the software manager....this also cannot access the internet. Both of my PC's have no problem when using XP or Linux Mint.
I have also discovered that if I piggyback, using Ubuntu 10.04, on a neighbours open wifi link I can gain access to the internet. My wifi is using WEP protection but as I said I can set the link up to the router, entering the appropriate key code, and have a good signal strength, I just cannot access a google search page.
View 8 Replies
View Related
Dec 14, 2010
Upgraded broadband service yesterday and now using a combined router and modem (Virgin Media Hub). But I now have no wired or wifi internet connectivity on either of my ubuntu 10.10 systems. I tested it on my work laptop which uses Window and it works fine for wired and wifi.
With 10.10 I no longer have a network icon upper right panel to check, so not sure how to set up wireless. Both machines have static IP addresses and are able to ping each other but there is no internet connection on either.
View 5 Replies
View Related
Apr 2, 2011
am having some problems with getting a pc to use the above software. background is my wife wanted access to mail in her "office". purchased a Tenda wireless router and installed ok (with TPlink pci wireless card on her pc). am using latest version of ubuntu (10.10 x64) on her pc and went to use firefox - timed out, same with evolution and thunderbird. synaptic works fine, opera and google chrome work fine. i'm guessing some sort of tweaking of the router is required but not sure where to start.
View 1 Replies
View Related
Jun 26, 2011
I am using an Asus R2 G32 Wifi Router. The CD's and the manual that comes along with the Router does not support Linux . Now the wifi connection was installed in Windows 6 months back with a password and but it got reset to default somehow. Now i want to set password again. Whenever i try to log in 192.168.1.1 in my browser, and Change the password and select Apply . Nothing happens to the page, as if it is static. No Submit Buttons work in this. Um a bit in mess ryt now as my wifi is vulnerable to any1 ryt now.
View 3 Replies
View Related
May 14, 2011
We just got a new router and ubuntu wouldn't auto connect to it. When I tried to click on the network manager icon in the panel, it was all glitchy and wouldn't work. Then, I removed it from the panel thinking I could just add it on again. I was wrong. Is there any way I can unremove it?
View 3 Replies
View Related
Jun 15, 2011
I am trying to get an arp packet from my wireless wifi router (access point), to which I am not connected. I simply tried ping 192.168.0.1, but the answer was connect: network is unreachable. What can I do about that?
View 5 Replies
View Related
Sep 1, 2011
My PC is connected to a HW router which in turn is connected to a modem
Code:
internet-----modem----router----PC1
Is there a console command (e.g. in telnet) to get my external (public) IP?
View 9 Replies
View Related
Dec 13, 2015
I am running : Linux ics385 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09) x86_64 GNU/Linux
Here's the situation
1. I'm trying to configure a WLAN using a D-Link DLR655 wifi router that is connected to eth1.
2. eth0 is connected to the ISP's DHCP router and has the IP 192.168.0.24
3. I've bridged eth0 to eth1 such that eth1 has the static IP 192.168.8.1
4. I've manually configured the router and it uses the 192.168.8.1 as the WAN address with its subnet on the 192.168.10.* address space.
5. I can connect a laptop to the D-Link using wifi and ping 192.168.8.1 but I can't ssh to it or to anything beyond it from the laptop.
6. If I'm on the server (192.168.0.24) I can ssh into either 192.168.0.24 or 192.168.8.1 but not if I'm on the laptop. I conclude from this that ssh is not the problem but the laptop says ssh: connect to 192.168.8.1 port 22: connection refused.
So, am I conceptually confused or is it that I have to open ssh up to the other sub-net address spaces or something like that?
View 5 Replies
View Related
Mar 8, 2010
My wireless card isent detecting my router even though it has detected my 3 of neighbors wifi. the only reason i thought that it may not be able to detect mine is that i use a wpa2 encrption rather then a wep like my neighbors. so i tried to go and reset my router using my other desktop and set it to a wep encryption, but for some reason my computer still did not detect it. i am using a dell dimension comnputer with both a linkseys N gigabit router model number :wrt310n and the reciving card linkseysduel band wireless N network adapter model number :wusb600n. can somebody please tell my what i am doing wrong? this is rather annoying as i have to drag my desktop and moniter out to the living room just to physically connect to my router to enable internet.
View 1 Replies
View Related
Jun 14, 2010
I was introduced to Ubuntu about a year ago and recently decided to come back to using the OS. I now dual boot it with Windows XP Home. My former setup was with Wubi but now I have it installed on an actual partition. (The Wubi install, for whatever reason, had little internet problems.) I use wireless internet, and though my network card was recognized out of the box and can connect to my network, the Internet is very slow. It takes almost a minute to look up Google. Also, Firefox will often report that it cannot find the server for whatever website I try to look up, after trying to connect to it/look it up. I also cannot access the web configuration page for my router. (192.168.1.1). The network app reports that I often have a signal strength of 40% or lower. The following is my hardware/internet:
Ubuntu 9.04 Jaunty
TrendNet TEW-424UB adapter (54mbps)
Westell VersaLink 327W router
ISP: CenturyTel/CenturyLink High speed internet (512kbps)
I am the only Linux computer on my network. (There is no encryption on my network. I know there should be. but my parents are not very computer literate and they are the ones who have access to the network. It is easier just to go without.)
I have tried disabling ipv6, setting custom DNS server names under ipv4, and setting the wlan rate (or something similar) to 1492. Nothing works. This does not seem to be a network problem because my internet works fine in Windows, and I can access the configuration page for my router to change channels, PPP, etc..
View 1 Replies
View Related
Jul 27, 2010
I recently bought a new wireless router (Cisco E1000) to use in my house. The E1000 supports mixed-mode 802.11n/g/b, which is what I have enabled. It is the first 802.11n router I've had. My netbook (an HP/Compaq Mini 110) only supports b/g. When connected to this new router, I can only see my status as root. NetworkManager shows a little red exclamation point, and 'iwconfig' shows nothing. It's missing in the 'iwlist scanning' list. Even still, I'm connected and can do everything just fine. However, everything shows up fine when I run 'sudo iwconfig' or 'sudo iwlist scanning'. These have always worked as a standard user before.
View 1 Replies
View Related
Jan 7, 2011
After forgetting my wifi router password, I had to reset and reconfigure the router. I enabled WEP, and after I typed the password, the computer now recognises it automatically. But I can't connect to the internet no matter how long I wait. (The wired internet connection works fine.) How can I get the wifi to connect to the internet?
View 1 Replies
View Related
Apr 29, 2011
I plan on installing a belkin wifi router. Is there any software to configure it ? also i need to increase the security as max as possible will my wifi be secure? only certain number of devices to access it also any software to display the number of devices accessing it like a radar? i am very fed up of all the command-line thinggy
View 1 Replies
View Related
Jun 23, 2010
Recently I bought a Usb wifi router Belkin F6D4050 as my old laptop does not have a wifi chip. Unfortunately Belkin does not give Linux drivers for their products. I searched around the web and found a solution where after downloading the ralink drivers and making some modifications it worked under ubuntu
As my laptop is a PIII I decided to install Arch core image and build on it. I followed the same instructions in compiling the drivers for the usb router and yes it worked under arch linux.
It generated a .ko file and it loads at boot time.
Now say I want to use Puppy/Ubuntu etc instead of Arch and I want to access wifi through the router.
My question is whether copying this .ko file specific to the device to another distro puppy/ubuntu in the similar path make it work or it needs to be recompiled on the new distro
View 3 Replies
View Related
Jan 4, 2010
I'm interested in configuring two Netcomm NB504 WiFi routers to work in a Bridge configuration. ie. Local PCs ---> Router <----//----> Router <--- local PCs
The NB504 router doesn't appear to have a native "bridge" mode. However, it does run Linux according to the documentation. I'm interested to hear from anyone who has actually got two of these routers to work in a bridge configuration. I'm not interested in general theoretical comments - only solid advice. I am also not interested in using other hardware for this exercise - I have two of these devices available for use in this project.
View 4 Replies
View Related
