Hardware :: PCI / Ethernet Card Not Working

Aug 5, 2010

A friend gave me a version if Ubuntu called "Lubuntu" to run on an older laptop of mine. The laptop does not have wifi or an ehternet connection. However, While using windows I was still able to access the internet by using a PCI card which created a wired ethernet connection for the laptop. I was able to install Lubuntu on the laptop, but for some reason it is not recognizing, or even noticing, the PCI card. What should I do to get internet working on this laptop again?

View 4 Replies


ADVERTISEMENT

Red Hat :: Ethernet Card Not Working On 5.1 Install

Jun 10, 2010

I have installed red hat 5.1 on my dell inspiron 1525 laptop. It is not detecting any ethernet card. Which driver am I missing? So far I found this package to be installed 'kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm' but it is showing me the dependencies problems..

View 3 Replies View Related

Ubuntu Networking :: Unable To Get PCI Ethernet Card Working Under 9.10

May 20, 2010

I have just installed a generic PCI ethernet card into a fairly low powered system (Celeron 766MHZ, 512mb Ram, 40 Gb HDD, Generic sound and video). The card came with no drivers. I have since installed Ubuntu 9.10, and up to a point everything is fine and looks great. However when I connect an ethernet cable up to the PCI card (in the hope of connecting with the Internet), nothing happens. I am thinking that I need Ubuntu drivers for the PCI card ? or does Ubuntu 9.10 come with drivers and I need to go into the 'engine room' to sort it all out ?

View 1 Replies View Related

Ubuntu Networking :: Ethernet Card Not Working In 10.04 Server

Jul 18, 2010

I've set up 10.04 Server so that I could install directly to a command line, due to the fact that Desktop was crashing during the install every time. The installation goes fine, except for the networking portion. DHCP fails every time I try it. So I set up a static IP as an alternative. Once installation completes, none of the network-oriented tools (ping, telnet) work. I've tried pinging my router and I get 'Destination Host Unknown'. This is true if I change to a DHCP oriented setup as well.

The router sees that the machine is there, as indicated by the slowly blinking connection light meaning that it's hooked up to *something* but there's no activity. Also, networking did work within Windows before I nuked it, so I know it has the ability to operate correctly. I'm at a loss, mostly due to my own newness and ignorance of how to start tackling this within this environment.

View 9 Replies View Related

Ubuntu Networking :: Replacement Ethernet Card Not Working

May 9, 2011

The on-board NIC on my machine died this morning, so I've just gone out and bought a replacement PCI card. The card has been recognised by Karmic, but it's not working. /var/log/messages says:

Code:
May 9 11:21:58 ian-desktop kernel: [ 2.082324] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
May 9 11:21:58 ian-desktop kernel: [ 2.082334] r8169 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[Code]....

how I install the appropriate driver (noting that I have to sneakernet files across via usb stick), or any other diagnostics I should try?

View 2 Replies View Related

Ubuntu :: Ethernet Card Not Working On Connecting LAN Cable

Jun 29, 2010

I have installed ubuntu 10.6.4 in my dell inspiron laptop but my ethernet card is not working when I connect my lan cable to it. But it is working well in windows vista. How to load drivers for it.

View 3 Replies View Related

OpenSUSE Network :: Dynex Ethernet Card Not Working Correctly?

Nov 27, 2010

I have a hp zd 7000, i really like this laptop, the onboard ethernet will not work at all. i purchased a dynex wired ethernet pcmcia card to get on the internet with. i have had no luck getting on the internet with it it will light up so i am getting power but no transmitting light works at all i have three net work cards listed in the system. one is the wireless. and the other two are the wired eth0 is the onboard and eth2 is the dynex what can i do next to determine the problem i do not use the wireless at all.

View 1 Replies View Related

Networking :: SME+Compaq Presario - Can Only Get One Ethernet Card Working At A Time

May 25, 2010

I have an older Compaq Presario S6000CL, specs for it are here:

*Product Specifications Compaq Presario S6000CL Desktop PC - HP Customer Care (United States - English)

Motherboard and bios here:

*Motherboard Specifications, A7V8X-LA (Kamet 2) Compaq Presario S6000CL Desktop PC - HP Customer Care (United States - English)

I am trying to get SME Server set up as a private server/gateway. Problem is no matter what I do I can only get one ethernet working at a time and only to the internet, not the local network. I tried both SME Server 7.4 and 8.0 beta 5 witht he same result. Now of course I checked the ethernet cards. The two I have now on it do work. One of them is the onboard ethernet the other one is in the second pci slot. They jsut don't work at the same time. (also I am familiar with SME and I had it configured correctly. Even if I messed up the order of the cards it is easy enough to just get up and switch the cables, reboot, etc.) I thought maybe there was a jumper setting or an over ride of some sort to let me use two ethernet cards. <I previously had all of this set up with an old HP computer (came with windows 98 originally.) But that computer decided it was time to retire to the road side.> It seems that it should just work. Any ideas on what I am missing or what I can do?

Edit:Spent another hour trying to get it to work and still nothing. It is picking up both ethernet cards just fine, I just updated sme 8 beta5 so the internet is working fine. I just can't get the local ethernet card to do anything at all, even though it is showing up as a green ok at boot. I checked the bios and I am not seeing anything there. It had an option to enable/disable LAN (which is enabled but I tried both and using to PCI ethernet cards. Didn't do anything different.) It has a Local LAN boot rom option, tried it enabled and disabled (Disabled now.) and nothing. I turned off the serial and parallel ports (doesn't make a difference either way.) I looked all over the motherboard and the only thing I can find is the jumper to reset the password. If a computer that was at least 12 years old could run SME and don't see why this one can't, it is half that age and a much better computer hardware wise.

View 9 Replies View Related

OpenSUSE Network :: Ethernet Card Wasn't Working - System Freezes

Dec 27, 2009

i have installed openSUSE 11.2 on a dell dimension 2400. My Ethernet card wasn't working, so i am using a wireless interface, but it doesn't work either. It worked on a dell dimension 4400, but when it gets to the activate network my system freezes. Should i re-install my system, or should i post this under the hardware category.

View 9 Replies View Related

Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?

Feb 8, 2011

I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.

DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)

The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).

View 2 Replies View Related

Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card

Dec 4, 2010

Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.

I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.

Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.

Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.

View 6 Replies View Related

Ubuntu :: Ethernet Card Cannot Be Enabled In 9.04

Jan 1, 2010

i tried to connect internet in ubuntu 9.04 by using sudo pppoeconf and now network manager is displaying as ethernet device not managed.i couldnt connect internet in ubuntu.how can i enable ethernet card in ubuntu.

View 4 Replies View Related

Red Hat / Fedora :: How To Configure Ethernet Card

Dec 10, 2010

I have installed linux on my system. I have connected two ethernet cards in the CPU. I have then connected one cord to one card from the modem. Its working fine. I have connected another cord from the second port to the switch and there by from switch to other systems. However the system is not detecting the second card. I am a newbie to linux and I don't know how to configure it.

View 3 Replies View Related

Networking :: Multi Ip In One Ethernet Card?

Apr 24, 2010

can one ethernet card support multiple ip address? but i think it's very dangerous. if bad guy take many ip, other people can't get ip. "does one ethernet card take multiple real ip or multiple virtual ip(one real ip)?" if it takes multiple real ip, then how it works good?..

View 7 Replies View Related

General :: Ethernet Card Not Getting Detected?

Feb 22, 2011

I have installed fedora core 8 on my system. But i am unable to use LAN connection. here are the results of some of the commands which give error messages

[root@localhost ~]# lspci | grep -i ether
00:19.0 Ethernet controller: Intel Corporation Unknown device 10f5 (rev 03)
[root@localhost ~]# uname -a

[code]....

View 11 Replies View Related

Debian Installation :: No Ethernet Card Detected

Jul 28, 2015

I am installing Linux for the first time right now and I am facing a bit of an issue when it comes to network hardware driver installation. The NIC on my motherboard is a Marvel 88E1111 (computer is very old). During the installation of Debian, I got to a menu which read "No Ethernet card detected. If you know the name of the driver needed by your Ethernet card you can select it from the list", then provides me with said list of driver names.

However, the only driver I could find that came close the NIC I am using was one called just "Marvel", and selecting actually didn't do anything (screen flashes blue and returns me to the same menu). So I continued by selecting the "none of the above" option, and now the new menu reads: "A driver for your hardware is not available. You may need to load drivers from removable media (...)". So I thought I should google for the drivers and see what I can find. The official site of the company that made my NIC doesn't even list my model in their drivers' list (to be expected since it is so old).

Then I found this: URL.., but I was expecting more of a download than the source code itself.

View 2 Replies View Related

Debian Installation :: CD Cannot Find Ethernet Card?

Aug 27, 2011

I'v just brought a notebook computer with a CPU i7 2630QM. I install debian 6.0.2.1 via CD driver, but it failed to success. The probles are three, (1).it reported "cannot find ethernet card" ; (2). It reported "cannot install continue" after the diskpartion step have been successed; (3). It said "netinstall may be a choice", so I say "Yes" and It really downloading something (543 files) and successed . After reboot, I loggin and cannot link to the internet. There is no such files ralated to netware config and I'm not able to config that, for I'm always only a bar finder in an meau.(shy a little,but this is ture). I do it 4 times and the situation and results are the same that I got a smallest netinstalled debian system on my computer and I cannot play music, cannot link to internet. I wonder: How could I install a real debian on my computer? Need I download anther version of iso file or do something that I do not know to makes it works. I can burn an iso image to a real CD by my old computer. I can also install OS such as mint via USB flash drive. In the computer Highly-Orangized world (already-wisdomed world), I have a body already but I've never been installed a sprit or a soul. So I really need to learn from you, from the great debian bbs, learn something of vital importance to take me into wise and freedom.

View 8 Replies View Related

Fedora Hardware :: Ethernet Card Not Detected In 14?

May 31, 2011

i have newly bought Desktop system with the following configuration:

1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb

i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.

View 4 Replies View Related

Ubuntu Networking :: Can't Get Connection For Second Ethernet Card

Jun 6, 2010

I'm trying to set up a shared Internet connection that had been broken by a previous update, I believe. Eth0 is connected to the Internet, whereas eth2 should be the connection going to my Roku set-top box. Under the nm-applet icon, an entry exists for "Auto eth0" for the first card, but there is nothing under the second card except "disconnected". How do I make a connection entry under my eth2 card so that I can share my Internet connection with my Roku box?

View 6 Replies View Related

Ubuntu Networking :: Ethernet Card Not Getting Detected

Dec 3, 2010

I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..

View 2 Replies View Related

Hardware :: Rhel 6.0 - Detecting Ethernet Card

Mar 23, 2011

I was here yesterday trying to make my ethernet card(which my rhel 6.0 doesn't detect) works. I initially untar a file that has the driver for my card which i got from atheros. When i tried to run it i.e ./autorun.sh i got the following result:

[Code]...

View 2 Replies View Related

Networking :: Connect Using An Ethernet Card Using Dhcp ?

Feb 15, 2010

My ISP finished some 'upgrades' on its infrastructure. The result is that I am having great difficulty in connecting to the internet.

I have 3 operating systems on my box - XP, Fedora 8 and Feota 12.

I connect using an ethernet card, using dhcp. In fedora 12, the ethernet card is controlled be networkmanager. After the ISP completed their upgrades, I was not able to connect. I tried to connect manually using

Code:

There was an error message -

Code:

I read the advice here: [url], and removed all but the important lines.

But even after that neither ifup eth0 or dhclient eth0 works.

In fedora 8, the ethernet card is activated by ifup eth0 in /etc/rc.local. I was able to connect on a couple of occasions, but that too stopped working. I tried both ifup eth0, dhclient eth0, and tried to use the gui( which fires the dhclient command), but none worked.

When I use windows, it takes about 2 minutes to get an ip (earlier it was immediate). Sometimes that doesnt work and I have to click on "repair" whereupon it starts working.

View 1 Replies View Related

Networking :: Configure My Ethernet Card To Work?

Sep 2, 2010

Tell me how to configure my Ethernet card to work. My pc only works wirelessly. I don't know what kind of Ethernet card is installed. I have Ubuntu 10.4 on a dell pc 1ghz, 20ghd, 512mb.

View 2 Replies View Related

General :: Assign IP Address To 2nd Ethernet Card?

Jun 22, 2010

In my red hat Linux machine there was a Lan card using eth0. IP is asign to that network card and it is functioning properly. I add another ethernet card in my linux machineit was detacted and when i use the commandQuote:[root@localhost root] # ifconfig -ait show me both eth0 and eth1 lan cards.I can see Ip address in my eth1 ethernet card but When I enter into

Code:
[root@localhost root] # cd /etc/sysconfig/network-scripts
and i use ls command it only show me the file ifcfg-eth1 and with

[code]...

View 8 Replies View Related

CentOS 5 Networking :: Bind More Than 2 Ip In One Ethernet Card?

May 19, 2009

i did configure as it was advised on [URL]... but it didn't work. for eg I added eth0:1 and eth0:2 on /etc/sysconfig/network-scripts/ when i do ifconfig i can see only eth0:1, i cannot see eth0:2, eventhough i configured as it was on the tutorial

View 4 Replies View Related

CentOS 5 :: It Does Not Recognise The Eth0 Ethernet Card?

Feb 9, 2010

I am attempting to install centos5 x86_64 on to an HP Compaq 6820s laptop.It appears the installation has gone ok but I have a big problem in that the centos installation knows nothing about the hardware on the laptop. i.e. it does not recognise the eth0 ethernet card.this means that I have no way of assigning an IP address to the laptop which means that it cannot join the network or the internet.how do you go about getting the correct drivers for the hardware that you are using?

View 11 Replies View Related

Debian Installation :: Didn't Recognize Ethernet Card

Sep 15, 2010

I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.

I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?

View 3 Replies View Related

Debian Installation :: Can't Get Pci Express Ethernet Card To Work

Dec 22, 2010

I have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.

I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.

[code]....

View 3 Replies View Related

Debian Configuration :: Squeeze No Detect Ethernet Card

Aug 17, 2010

i install devian squeeze with the netinstall iso, all work fine except for the auto-detect of my ethernet card.i have a mother asrock p4i45gv with an onboard ethernet card realtek rtl8139/810x family fast ethernet NIC.i try everithing, the ifconfig shows only lo, but ifconfig -a shows a eth0 any ideas?

View 12 Replies View Related

Debian Hardware :: Unable To Browse Web Using Ethernet Card

Jan 19, 2016

Just turned on my computer after being away for a month and I am unable to browse the web when connected using my ethernet card.Skype is able to work fine and I am able to ping my router yet both Iceweasel and Chrome are unable to connect to any websites. Apt-get did not work as well, and Chrome states that there is an error with the DNS lookup, which lead me to try:

# /etc/init.d/nscd restart

yet it didn't work. I am able to browse the web normally when connected using the wireless card.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved