Hardware :: E: Hl1440lpr: Subprocess Installed Post-removal Script Returned Error Exit Status 126?
Jun 10, 2010
From the Synaptic Package Manager, I searched for HL-1440. There were two files appeared: (1) brother-lpr-drivers-laser1, and (2) brother-cups-wrapper-laser1. When I marked (1) for installation, (2) was automatically selected. After I applied the files for installation, I received this error: "E: hl1440lpr: subprocess installed post-removal script returned error exit status 126." What should I do? I am still learning Linux/Ubuntu and really don't have much experience with this.
View 2 Replies
ADVERTISEMENT
Nov 18, 2010
I have had no problems with downloading/installing updates and programs, and everything worked fine. Until memtest came along. It ran by itself (I think my dad made it the first boot option in grub), and now if I try to install any packages or programs, it will either say "Grub installation failed" or that any packages I tried to install failed. If I removed memtest, would that make it possible for me to install stuff again? Or is there a way to work around it?the main error report I get is: "E: memtest86+: subprocess installed post-removal script returned error exit status 127"
View 1 Replies
View Related
Apr 21, 2011
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
View 9 Replies
View Related
Apr 16, 2010
i have a problem and it's been persisting since i installes MST Core fonts.
terminal log is here:
-----------start of pasting -----
user@Ubuntu9:~$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
code....
View 1 Replies
View Related
Jul 10, 2010
Code:
E: empathy-common: subprocess installed post-installation script returned error exit status 2
E: empathy: dependency problems - leaving unconfigured
E: nautilus-sendto-empathy: dependency problems - leaving unconfigured
View 6 Replies
View Related
May 6, 2010
I get this error whenever trying to update or install applications:
Quote:
E: sun-java6-plugin: subprocess installed post-installation script returned error exit status 2
What can I do here?
View 2 Replies
View Related
Jun 4, 2010
Everytime I attempt to install anything, in any way, I'm given the following error message:
E: lib32nss-mdns: subprocess installed post-installation script returned error exit status 2
E: wine1.2: dependency problems - leaving unconfigured
I went into Synaptics Package Manager and told it to uninstall WINE in case that was what was causing the problems. It sort of half-uninstalled-it then gave me that exact same error message.I have two threads currently open on the forums - adjusting laptop brightness and flashing BIOS - and both problems hit a brick wall because of this same error message.
View 2 Replies
View Related
Mar 9, 2010
it's a hot day and nothing seems to be going right. Trying to figure a way out of this one - error 127. Looks like it could be Metacity problem? There a couple of pythons that also have a problem.
Code:
(Reading database ... 145089 files and directories currently installed.)
Preparing to replace metacity-common 1:2.28.0-0ubuntu1 (using .../metacity-
[code]....
View 5 Replies
View Related
Mar 14, 2011
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
View 9 Replies
View Related
Mar 8, 2011
I'm using ubuntu 10.10 maverick, a package named lmodern is not required by the system, but it can't be remove or purged as follow:
Code:
yurippe@Neptune:~$ sudo apt-get autoremove
Reading package lists... Done
[code]....
View 9 Replies
View Related
Apr 27, 2010
I have been having the worst time trying to get sametime messenger from IBM to install properly. I had it working fine for the last 6 months and yesterday I accidently updated and it all went to {1134}. I seem to have found dkms to be the source of the problem.
I get an exit 0 regardless of whether or not its install or uninstall. I have managed to get pidgin to work for now, but it is no means ideal for my purposes.
I kept getting this...
rastlosen@rastlosen-laptop:~$ sudo apt-get install sametime-connect
[sudo] password for rastlosen:
Reading package lists... Done
Building dependency tree
[Code]...
View 1 Replies
View Related
Sep 12, 2010
I am using a fully updated fedora 13 64-bit system and when i run make on xoscope i get the following error:
collect2: ld returned 1 exit status
I have already installed all of the prereqs. And the configure went without errors.
View 9 Replies
View Related
Jul 27, 2010
Everytime I install a package or use update manager I get the following message.
Code:
E: linux-image-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-generic: dependency problems - leaving unconfigured
E: linux-generic: dependency problems - leaving unconfigured
E: linux-headers-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-generic: dependency problems - leaving unconfigured
The install/upgrade appears to work but I'm getting concerned about the message continuing for so long.
View 2 Replies
View Related
Dec 8, 2010
I am preparing everything that I will be using in my fourth year project which is based on the grid computing concept. My problem is that before I installed ubuntu 10.10, I was using 9.10. And in my previous version (9.10) I was able to install condor through the synaptic package manager comfortably,but after upgrading to version 10.10 am getting the following error after installing condor:
"E:condor:subprocess installed post-installation script returned error exit status 127"
View 1 Replies
View Related
Jan 26, 2011
I'm getting the following output when trying to compile my cpp project:
Code:
"/usr/bin/make" -f nbproject/Makefile-Debug.mk QMAKE= SUBPROJECTS= .build-conf
make[1]: Entering directory `/home/walther/NetBeansProjects/CppPlay'
"/usr/bin/make" -f nbproject/Makefile-Debug.mk dist/Debug/GNU-Linux-x86/cppplay
[Code].....
I've seen you guys replying to others about this collect2 error, but all of them had some kind of informative message from the compiler.
View 1 Replies
View Related
Apr 4, 2010
I am making a project learning about inheritance and polymorphism
it consists of
Account.h
Account.cpp
[code]....
View 2 Replies
View Related
Oct 12, 2009
I am using apache2 with subversion and trying to get post commit script to run an svn update command. All svn commands seem to work fine manually
Everything used to work fine but then the server ip changed and I can no longer access it with the web name and have to use the ip directly
I am using tortoise svn with vista on my work machine
Here is the script
#!/bin/sh
export LC_CTYPE=en_US.UTF-8
/usr/bin/svn update /home/common/webroot/bob
Here is the result.
Command: Commit
Modified: C:UsersMattDesktopcheckout - bobindex.php
Sending content: C:UsersMattDesktopcheckout - bobindex.php
Completed: At revision: 63
Error: post-commit hook failed (exit code 1) with output:
code....
I think what i need to do is update the certifcate for the apache2, but I'm not sure how to do this, where to put it, and then which of the thousand apache config lines needs to be changed
View 5 Replies
View Related
Oct 13, 2010
I am getting this error in the console whenever I upgrade packages. This doesn't affect anything I do in Ubuntu, but it is just a little annoying. Here is what I get when I execute sudo apt-get upgrade:
Code:
Setting up linux-image-2.6.35-22-generic (2.6.35-22.34) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic
Failed to symbolic-link boot/initrd.img-2.6.35-22-generic to initrd.img: File exists
dpkg: error processing linux-image-2.6.35-22-generic (--configure):
subprocess installed post-installation script returned error exit status 17
Errors were encountered while processing:
linux-image-2.6.35-22-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 9 Replies
View Related
Jun 29, 2010
I am trying to install Matlab v. 7.10 on my Ubuntu machine. I was able to successfully download the necessary files. However, when I attempt to install using ' ./install ', I get the following error message:
Finished extracting ftp files.
Starting installer ...
An error status was returned by the program 'xsetup', the X Window System version of 'install'.
The following essages were written to standard error:
/home/user1/mathworks_downloads/update/install/main.sh: 178: /home/user1/mathworks_downloads/update/bin/glnxa64/xsetup: not found
Attempt to fix the problem and try again. If X is not available or 'xsetup' cannot be made to work then try the terminal version of 'install' using the command:
install* -t or INSTALL* -t
Sorry! Setup aborted . . .
I tried using the command instal* -t, as recommended by the program, but then I get this error message:
Finished extracting ftp files.
Starting installer ...
awk: cmd. line:2: BEGIN { found = 0; extra = 9; min = 24; default = 24 }
awk: cmd. line:2: ^ syntax error
awk: cmd. line:6: if (nrows < min) nrows = default
awk: cmd. line:6: ^ syntax error
awk: cmd. line:12: END { if (found == 0) print (default - extra) } .....
View 3 Replies
View Related
Jan 16, 2011
Attempting to install Abyss Web Server on my 64 bit laptop. i have done mkdir ABYSS to create the ABYSS directoty to install the server to. Command cd ABYSS then "tar xzfm Abyss Web Server installation package" as per instructions. Result tar (child) Abyss cannot open; No such file or directory tar: (child) Error is not recoverable: exiting now tar Child returned status 2 tar: Error is not recoverable: exiting now likely .
View 5 Replies
View Related
Apr 23, 2010
I was installing SMPLAYER when the power failed...now i get this error message when trying to re-install the packages..
E: liblzo2-2: subprocess installed post-installation script returned error exit status 2
E: mplayer-nogui: dependency problems - leaving unconfigured
E: mplayer: dependency problems - leaving unconfigured
[code]....
View 3 Replies
View Related
Oct 31, 2010
I met some problems with installation of Matlab2010a for Unix.My edition of ubuntu is 10.04 and I downloaded an iso file of ubuntu and extract that in this document: /home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/
when I start to install, it showed :
------------------------------------------------------------------
An error status was returned by the program 'xsetup',the X Window System version of 'install'. The following messages were written to standard error:
/home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/update/install/main.sh: 178: /home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/update/bin/glnx86/xsetup: Permission denied[code].....
View 2 Replies
View Related
Dec 10, 2010
I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
View 1 Replies
View Related
May 4, 2010
I'm running Ubuntu 9.10 Karmic and XBMC Live.I get error messages which seem to relate to openvpn.So I tried to remove it with the remove command. This is what I getQuote:
@XBMCLive:/home$ sudo apt-get remove openvpn
Reading package lists... Done
Building dependency tree
[code]....
View 1 Replies
View Related
Jun 28, 2010
"E: backuppc: subprocess installed post-installation script returned error exit status 1"whenever I upgrade my system I get the above message Anyone know how to fix it? or if it's anything important ?
View 1 Replies
View Related
Aug 2, 2011
I have a desktop environment with Apache2.(If someone asks why desktop to run Apache2, its because the desktop must display a local website)When I update the html files from a windows box it is being copied in a home/user folder.Cron now has to copy the files with r to the localhost area.sudo cp -R home/myself/Downloads/* /var/www/ works fine:The script containing just that one line is in a file in my /home/myself/Documents folder named: copy_site_localhost.Cron entry in turn was created with the command: sudo crontab -e and the entry is:*/10 * * * * /home/myself/Documents/copy_site_localhostThe error in the syslog file in /var/logs is as follows:
.......CRON[1234] (root) CMD (home/myself/Documents?copy_site_localhost)
.......CRON[1236] error (grandchild #1234 failed with exit status126)
.......CRON{1236] info (No MTA installed, disregarding output)
[code]....
View 1 Replies
View Related
Dec 14, 2010
I am using ubuntu server 10.10. Tried to create a cronjob for logwatch/sendmail, but without sucess.
I followed the instructions : URL
When I type :
Quote:
sudo grep CRON /var/log/syslog
I get the result :
CRON[27611]: (CRON) error (grandchild #27612 failed with exit status 127)
View 4 Replies
View Related
Sep 1, 2011
started getting errors from software centre, synaptic and updater that halevt is giving error "exit status 100" Tried reinstalling halevt by software centre, synaptic, and terminal without any luck.
View 5 Replies
View Related
Apr 28, 2010
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies
View Related
Apr 10, 2010
I've installed wine on my laptop and it runs fine. Although it seems something happened while installing it (via apt-get install), because everytime I use apt-get untill then I get the following in my terminal:
Code:
The following packages were automatically installed and are no longer required:
Use 'apt-get autoremove' to remove them.
The following NEW packages will be installed:
View 2 Replies
View Related
