I am currently using a Ubuntu Netbook Remix 9.04
When I press the power button, I see a dialogue box which asks for confirmation and if nothing is confirmed system automatically shuts down in 60 seconds.
I want to change this time of 60 seconds to say 30 seconds. Is it possible? Also is there a way to hide that dialogue box...
I have a dell zino inspiron media pc with Ubuntu 10.04 installed. I am able to shutdown using the power button on machine i.e. System->Preferences->Power Management option 'when power button is pressed': choose 'Shutdown'.But for option 'when suspend button is pressed', I only get 'Suspend' or 'Hibernate' in the drop-down. Where is my 'Shutdown' option?I really want to be able to shutdown my machine from my wireless keyboard!
View 1 Replies View RelatedA friend of mine has an old emachines with XP on it and at first it would complain it had to test the disk and turn off in less then a minute. Now it won't do anything except run the power supply and cpu fans while the start button is pressed. I checked for power on the blue , purple ,red and orange wires while 14 and 15 were jumped on the power supply. There are no lEDs on the board and no beeps. I disconnected all the peripherals also
View 11 Replies View RelatedHow to setup LXDE (a linux desktop environment) to hibernate a PC after the power button on the computer is pressed?
View 1 Replies View RelatedI have a Microsoft Wireless Desktop 3000 (Wireless Keyboard 3000 + Wireless Mouse 5000), actually, I have two of them, one in this computer, running Ubuntu 10.10 and another one in a box running Ubuntu 10.04.In the box running 10.04 I can perfectly use 70% of the hotkeys the keyboard has, the 30% left I guess they're not compatible, but that's not a problem.In the one running 10.10 whenever I use a hotkey,t works, but,sametimet "blocks" the mouse left button in the 'pressed' state. Let me be more clear, it's like I'm holding down the left click all the time and I don't ever release it. Unless I restart the system, I can't recover the left click.
View 3 Replies View Relatedtechnically, this is UNR with lxde installed after extended UNR use. i like being able to hit my power button in gnome, and getting a message asking what you want to do, or cancel if needed. well, in lxde, the shutdown button brings up a similar message. could i map the power button to show that popup in lxde?
View 1 Replies View Relatedfor some reason, my opensuse 11.2 can not shut down as normal. by pressing ctrl-alt-F1 and issuing "init 0", the console displays the following messages and then stops there. Segmentation fault Master Resource control: runlevel 0 has been reached skipped services in runlevel 0: SuSEfirewall2_setup I have to push power button to shut down it.
View 2 Replies View RelatedI have a Genius K627 Keyboard with Power, Sleep and Wake buttons. ACPI is unsupported on my computer, but it can turn off its power supply when the system halts (PM is ok). I would like to bind the Power key on the keyboard to execute the /sbin/halt command. What I already know is that I can specify an event in inittab (kbrequest) that would execute a command. What I don't know how I can make my system receive pressing Power button as a kbrequest. The scancodes of Power button on the keyboard (by showkey): 0x74 0xf4
This is the line I was talking about in my inittab:
Code:
ce:12345:kbrequest:/sbin/halt
I think I should edit /etc/console/boottime.kmap.gz but don't know how I could insert this scancode into it.
I have Ubuntu 10.10 on e-machine T-1221 I can shut down the machine using :
sudo shutdown -h from terminal
I can shutdown using powerbutton on case. I can't use the applet indicator powerbutton in root account, but, I can use the command under "System-->-Shutdown" in root account, but I don't see "System-->-Shutdown" in users account. Is there a way to add it ? I installed Debian 6.0 Squeeze on my Acer Aspire 3620 Laptop it works just fine and has the same Gnome Desktop. The only thing different is that there is no powerbutton available thru Gnome applets, only the command on menu under" Sytem-->-Shutdown", which I'm fine with on this machine.
These are the things I tried on emachine T-1221
I tried "acpi=force"
I tried "noacpi"
I tried "noacpi nolapic"
I read the bug reports it stated that on live-cd there was only suspend and hibernate. There is no shutdown or reboot. I tried: "#start acpi", it closed with errors. It said that Ubuntu uses upstart. Is there a script which you can add to power button to add the shutdown.? Really I don't necessarily need powerbutton, I think the work around would be adding the command to "System-->-Menu.
May I know why my Date, Time and Power on button missing?
View 6 Replies View RelatedWhen I boot, apparently any Linux (Ubuntu and CloneZilla), I see the letters Code: ^]]B scroll pass, over and over again. This represents the down key as when I try to do anything the down key is held down. This occurs during boot on Ubuntu (once I get to the login screen it stops and does not happen). This does not happen at the GRUB screen or in Windows. It also occurs during the entire CloneZilla process and Ubuntu alternative install process (making both of these impossible)
I can't find any reason for this to happen and have been using both CloneZilla and Ubuntu for a long time before this happened. Does anyone know what I could try to fix this.
Ubuntu no longer boots.
I'm learning Signals, and I have a question:
Is possible to make a handle when I press any of the keyboard buttons?
The SIGINT handles the Ctrl-C combination, but I want to handle if any keyboard button was pressed.
I have Linux debian 7.7.0 i386-amd64 under VBox 4.3.20 and here is the problem:::
When I open the menu from Linux's top-right corner and click SHUT DOWN..., it shows the dialog with choices, and that Linux guest will automatically shutdown after 60 seconds and I need to change that delay value to 3 seconds. Of course I could just re-click Shut Down -button again, but I don't want to do it. Period.
By Googling I found these "instructions" for UBUNTU:
None of this worked on my 13.04 system. In the end I re-compiled gnome-session.
In gsm_shell.c and gsm_logout_dialog.c change #define AUTOMATIC_ACTION_TIMEOUT from 60 to 5
I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
View 9 Replies View RelatedMy problem arises two days ago. Power button of my keyboard has stopped working,why?It works well when I use windows.
View 2 Replies View RelatedI'm having a problem with vim and xterm. When I open a file and press any key, the colour scheme changes slightly. This doesn't happen if I run a 256-colour xterm (export TERM='xterm-256color') but if TERM is set to 'xterm' (the default) I see the colour change. Setting TERM='xterm-256color' in my ~/.bashrc is a "solution", but I'd rather not have to do that since it's never been necessary in the past (e.g., on 13.1) and I don't use any 256-color schemes for vim (usually just the default or possibly "delek"). It doesn't happen with rxvt or with Xfce's terminal. I've tried compiling some other versions of xterm but they either exhibit the same behaviour or don't build. I have tried running without any ~/.vimrc file just to be sure it wasn't one of my settings and I've also tried the sample file at /usr/share/vim/vimrc; the effect is the same.
View 10 Replies View RelatedWhat happened to the "Do nothing" option for "When the suspend button is pressed" in Lynx? It would also be useful to have a "Do nothing" option for "When the power button is pressed".
View 2 Replies View RelatedI did a live upgrade from 11.3 KDE and observe a following issue.When I press the shutdown button on the laptop it initiates the shutdown and shuts down fine but after a significant delay of time (something like 30 seconds). When I click the shutdown button in KDE it initiates the shutdown instantly. This was not the case in 11.3 where the shutdown worked the same regardless of the method that triggered it
View 6 Replies View RelatedWe are planning the migration fro Karmic to Lucid for our systems, these systems are custom Ubuntu installations, we create them using debootstrap and then running a script that installs desired packages, mainly X server and (optionally) fluxbox.
I've set up a hard drive with our current scripts (the only modifications were the change of lucid instead of karmic for update servers and removing usplash from our scripts), but I've found that pushing the power button would not shut down the system (we have no GDM or similar), the system does not respond to this event as used to do under Karmic.
Do you know where I can check/enable the system to shutdown when pushing the power button?
Occasionally, the power off button on the panel goes missing on Ubuntu 10.10 installation. I can't seem to notice any pattern to it. I can shut down from the command line just fine, but how can I get the button back?
View 2 Replies View Relatedso im not sure what just happened but my power button at the top right just disappeared. thought it ok ill just add it back to the panel but the only thing is a power button that dose not give the option to log off or switch user. there is something for that but nether can be put back at the top right.now I am using Ubuntu 10.10 and I saw that 11.04 is out so then I thought that ill just update. but I this is my first update, and I dont know how it works. will all the stuff that I have done to this computer to make it work go away and I will have to do all that again. or will it be like the small updates where it just fixes things
View 7 Replies View RelatedThe widget ,which comes in the right hand side corner of the panel in ubuntu for the shutdown and logoff, i have deleted it by mistake. I want it back.Can somebody guide me to get it back.I have attached the screenshot of which i am talking about. I have marked in Red.
View 9 Replies View RelatedIn Ubuntu 10.04: if the screen has been locked (automatically by the screensaver or user-activated using the top-right menu) pressing the power button doesn't initiate shutdown. Is this a bug or is it a configurable option?I would expect to either get the usual 60 second shutdown delay or a graceful shutdown right away.
View 3 Replies View RelatedRecently i've switched from ubuntu 8.04 to Lubuntu 10.04, since that time the powerbutton does not work anymore.I've tried to find out how powermanagement is implemented in ubuntu to be able to debug this problem. But most documentation about this topic seems dated.I've already tried a few thing, most important stuff I did is:
- tested the scripts in /etc/acpi/ and added a line to write something to a textfile when its called. But this file is not called when pressing the powerbutton.
- checked bios settings, seems alright (and these settings worked on 8.04 to).
I've installed lucid on two computers now and have been using or a few months.Overall, it's pretty good and everything just works. However, every now and then (seemingly random), the power button in the indicator appletsion panel widget randomly disappears, so I'm unable to shut down my computer without re-adding the widget, or using the command line to shutdown the computer. Now this is acceptable for me, an advanced user. However, this is not acceptable for my parents and family, who also use ubuntu computers. Today, my mother called me to ask why she couldn't turn off her computer. I was dumbfounded, and had to walk her through turning it off "by hand."
Now this is not me accidentally removing the indicator applet session panel item. No, I can still see the user name bubble with availability information and I can still switch users. It's just that the power button is completely missing (sometimes the place where it used to be is occupied by a corrupt graphic). Additionally, if I login later, the power button magically returns without me having to do anything with regards to the panel. This is disappointing indeed.
Honestly, this is why ubuntu and linux in general still have the reputation they do of being non-user-friendly. At least in windows or mac, when I get fed-up I can turn it off. But not so in ubuntu. No ubuntu tortures me continuously and I marvel that such a simple thing has escaped the minds of such advanced programmers. I wish Canonical would focus on letting us TURN OFF the computer instead of adding crazy features that I'm not going to use. I mean how can a real operating system fail at such a simple task
I am building a small Ubuntu box made for our clients to listen to an audio stream. At startup, I have scripts that start the audio stream, then locks the screen so clients can't change any settings. It works flawlessly.
However, if a client has to shut down the box, they can't. Note this is a headless unit, no monitor, keyboard, or mouse. It will ONLY be used to play streaming audio. I need for the client to be able to safely shutdown the unit by pressing the power button. But, when the power button is pressed, ubuntu asks for the user password. Is there a way to just make the system shutdown without entering a password?
The power button does not work when i'm running XBMC.t works when I'm in the XFCE desktop! I push the button and the computer shut's down. What's the problem? Why does it not work in XBMC?
View 4 Replies View RelatedThe menus at the tops of 10.10 have gone? All ive done is update. Sometimes my power off button is missing too?
View 2 Replies View RelatedI have installed the 10.04 ubuntu and all was good, but after doing the updates the shutdown button has gone from the corner near the clock and from the system menu.
if i go logoff the shutdown button is at the bottom but doesnt work.
I can shutdown in the terminal tho.
How can i fix this (put the buttons back)?