Hardware :: Can't Get SATA Drive In AHCI Mode, Ata_piix Stuck?
Apr 7, 2010
I realized after spending some time performance tuning my mini Linux server that the hard drive is stuck in IDE mode, and I can't get the controller to be discovered in AHCI mode.EDIT: I should add that I'm running Vector Linux 6.0 Lite, which is based on Slackware 13.0. The Kernel version is 2.6.27.12.
The mobo in question is actually a small mini-ITX board from Foxconn. Here is a links to the specs:url.I use it for a media server, and so far the drive I'm using (Hitachi HDE721010SLA330) is working fine in IDE mode (apparently).
I have a strong suspicion that the crappy Foxconn BIOS supplied with the board is not initializing the Intel 945GC controller in AHCI mode. There is a BIOS entry for setting the controller to "Advanced", but I don't think it's doing the job.
Here is an "lspci -vvnn" of my system:
Code:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: Foxconn International, Inc. Unknown device [105b:0d4d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
code....
Is there anything I can do to get the drive/controller in ahci mode, or is the BIOS screwing me?
View 3 Replies
ADVERTISEMENT
Aug 19, 2010
I am about to do a clean install of 10.04 (64-bit) on a ThinkPad X201. The machine will only be running Ubuntu (i.e., no dual-boot). Is there any reason to use compatibility mode for the SATA boot drive, or will AHCI work fine?
View 2 Replies
View Related
Sep 28, 2009
Yesterday I was on my Windows computer doing homework. Once Football came on, I hit the Standby button on my keyboard and walked out of my room. Came back at halftime to discover that my system never went into Standby. I turned on my monitor and saw a bunch of code repeating. I don't remember it all, but it was something to this effect
Super Block not compatible with current BIOS
scanning for *insert system file here*.... not found
scanning for floppy drive... not found
scanning for cdrom1... not found
So I hit the restart button on my tower. When it restarted, I was brought back to the same screen. So I unplugged the power cord from my computer and counted to 10. I plugged it back in and this time I got my mobo logo screen and the system appeared to start up fine, until I got to the SATA drive scanning screen. When my computer would scan for my SATA hard drive, it would idle for several minutes, during which a series of periods (".") would show up until eventually I get a message that says: WARNING! - Something wrong with your hardware!
I have troubleshooted a number of things so far:
1) I took my SATA Hard Drive out of my computer and plugged it into my Linux computer and the system booted fine! I used the same SATA cord, so I know both the drive and the cord ARE WORKING!
2) I tested the power cord from the power supply that runs to my HD and it is working just fine.
3) I plugged the HD back into my Windows computer (the original one it was in when I started having this problem) and I ran GParted. When the GUI came on, I could not see any drives and there was a message at the bottom of the window saying that no devices could be found. This was no surprise to me because I watched the verbose mode as GParted booted and it gave error messages when it tried scanning for my hard drive.
4) I have also tried plugging it into the other SATA ports on my motherboard.
5) I tried flashing the mobo BIOS. The flash worked just fine (or at least it appeared so), but the HD is still not being found on the system boot scan.
Bottom line, I know the hard drive is fine because it worked in my Linux computer. So I am thinking it has to be the motherboard. But before I go out and buy a new Mobo and CPU (and possibly new RAM), I wanted to quickly jump on here.
View 1 Replies
View Related
Jan 20, 2010
How can I force my kernel to use the ahci driver when both the ahci & sata_nv are built into the kernel.?
My MSI board bios doesn't have an option for "AHCI MODE". The only sata option that it has is "called "On Chip Sata" & is located under "Integrated Peripherals. Also, the only values available for "On Chip Sata" are enabled or disabled. If I choose the disabled option, the sata drives arn't found & bootup fails.
I tried to tell the kernel to use the ahci driver by appending kernel options to my Grub2 bootloader but they all failed.
(eg.) ahci, scsi=ahci, ata=ahci, ahci.=0 sd=ahci
sata_nv=no, sata_nv=0, sata_nv=none
The only thing I can think of that is left to do is to re-build my kernel with CONFIG_SATA_NV as a loadable module & CONFIG_AHCI as a build-in driver. With only the ahci driver available at boot, the kernel will have to use it or fail to boot.
One more thing I want to say is that my other computer with the ASUS motherboard uses the ahci driver & I have both the sata_via & the ahci drivers built into the kernel. However, it has a bios option for AHCI MODE.
(eg.) Southbridge VT8251
Serial ATA IDE Controller <AHCI>
View 8 Replies
View Related
Apr 9, 2010
When trying to install RHEL 5.4 on a Flagstone SATA (encrypted hard disk), linux timeouts while loading the ata_piix module.
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd 81/00:08:00:00:00/00:00:00:00:00/e0 tag 0 data 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2: soft resetting port
ata2.00: configured for UDMA/33
ata2: EH complete
The above message is repeated several times until the kernel eventually "panics".If I use a non-encrypted SATA (Maxtor, Fujitsu, etc), the install works. It only fails with Flagstone SATA encrypted hard disks.
View 2 Replies
View Related
Mar 12, 2011
I want to install Ubuntu 10.10 via a DVD-ROM but I faild. I got the message "no common cd-rom drive was detected." I have tried to install ubuntu 11.4 and failed too.
Hardware Setting:
DVD-ROM was attached to SATA 3.0 port.
SATA controller was set to IDE mode.
PCH is CougarPoint.
I use the same hardware setting to install Red Hat 6.0 and it works fine. I tried following boot option but in vain: noapic, acpi=off, nodmraid, all_generic_ide. It is ok to boot via a live usb but ubuntu 10.10 still can't find DVD-ROM. I have to use the hardware setting I descripted to install Ubuntu 10.10.
dmesg:
Code:
[ 1.892198] ata1: SATA max UDMA/133 cmd 0x3098 ctl 0x30ac bmdma 0x3070 irq 19
[ 3.309652] ata1.01: failed to resume link (SControl 0)
[ 3.469636] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[code]...
View 5 Replies
View Related
Jan 22, 2011
so here's my issue and what I think is causing it right now. I have a 1TB external usb hard drive that has worked perfectly, but recently I set it up a mount point for it in fstab so that I could create a SMB share on the drive so I could stream videos and pictures to my TV through my Wii using WiiMC. This now works perfectly, but now the hard drive has been set into read-only mode. When I use sudo to try to chmod the drive or the folders on it, it does nothing. When I right-click on the drive and check the permissions tab, it says the owner is root and all the options are greyed out.
I've read through several posts on similar topics to this, but none of them have been very helpful as they suggest using command line tools that I don't know how to use, so I'm hoping someone here can give me concise, step by step instructions of what to type in, or what settings to change in fstab to solve my little problem so I can start copying stuff back onto my drive. I'm running Ubuntu 10.10 and the filesystem on the external drive is FAT32. Here's some more info you might need:
sudo fdisk -l:
Code:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]...
View 5 Replies
View Related
May 28, 2011
ubuntu 8.04 server can not detect seagate sata hard drive 2tb or sata Lg dvdrw x22 sata drive .is it possible to install it without buying a pci ide sata card?is it possible to get a driver for sata driver and sata drive that can be recognise by ubunto 8.04 server ?or to get the files for 1.44 floppy diskdoes the late edition of unbutu recognise sate hdd and sata cdrw drive automaticly during the installation of the unbutu?
View 1 Replies
View Related
Dec 15, 2010
I have successfully installed a dual boot system with Fedora 14 on drive sdb and WIN7 on drive sda, with Fedora 14 being the major (default) OS. The system is an AM3 with a quad core CPU and all SATA drives. The drives are set to IDE mode, and I am wondering:-
1. What are the benefits of AHCI - will it improve the speed and responsiveness of my system? And
2. If it is worth installing, do I have to do a complete re-install of the OS, or is there some way of updating the installed Fedora to include and operate with AHCI mode drives?
I'm quite happy with the system as it is now, but if there is a way to squeeze extra speed out of it I'm willing to give it a go. And never having been involved with SATA drives and Linux previously, I'm completely ignorant on the subject.
View 2 Replies
View Related
Apr 11, 2010
I've been using Vim for several months now via my web host (they allow putty access). All of a sudden, the escape key has become unresponsive. I cannot exist insert or any other mode by simply hitting escape. I have to hit F1 which brings up the help in vim and kicks me into command mode.
I'm most certain that my escape key on my keyboard is functioning fine since all of my windows shortcuts that use the escape key operate normally.
I know this is a ridiculous question and I'm certain there's a lot more to look into regarding a solution. What I really need is a solid lead as to where to start looking.
I'm using vim via putty I'm logging in using jailshell I'm not root
View 2 Replies
View Related
Jan 9, 2011
Running Ubuntu 10.10 Maverick.Tried to do some nvidia config stuff, pressed Ctrl + Alt + F11, went to TTY1 mode.startx doesn't work anymore, responds with weird stuff like, "closing log....giving up".Looked online already, nothing works.Already uninstalled the ubuntu desktop, and reinstalled it. Did the dpkg x.confg files.
View 4 Replies
View Related
Jul 1, 2011
Ok not sure what is up or how to get it back, the desktop is stuck in classic mode. I want to continue testing with Unity, i think the classic mode is like gnome.i was/am considering switching all my home systems to Ubuntu and want to see if the wife can get accustom to Linux.New user btw, so please bare with me.FYI I think the wife can get used to Unity since it reminds her of an Android
View 6 Replies
View Related
Aug 13, 2010
Can SATA 3 (SATA III) Hard disk be run on motherboard which only supports SATA II, except sacrificing the speed (throughput)?
View 2 Replies
View Related
Dec 11, 2010
since ever, i face the problem, that i cannot continue using my computer properly after i suspended it to ram and wake it up again.Fedora 14, 64-bit, most recent and stable kernel
mainly KDEMotherboard: Gigabyte P55A-UD4Hard DrivesSAMSUNG HD501LJSAMSUNG SP1213NI can figure out, that everything works fine, but with a severe delay.Having a look at my led, signifying hard drive activity, it flases once a second for approx 10ms. frequency is very constant.so i performed several checks:firstly, hdparm -i, there is no difference before and after sleeping mode:
Code:
[root@bobbl-pc bobbl]# hdparm -i /dev/sda
/dev/sda:
[code]...
View 1 Replies
View Related
Apr 22, 2010
have installed warsow from synaptic & it's stuck in spectator mode.anyone know how to fix this so i can play?
View 1 Replies
View Related
Feb 21, 2016
I cloned my disk that have dual boot in it clone the disk remove the old one put the new one so far okay. But when i put with the new disk to linux it goes to the emergency mode:
run fstab and this is my fstab results:
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=cd9637db-0479-4ef0-90fd-481a50e23060 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=df29ffb9-91a8-48d7-91cd-5e671b55677d none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
UUID=696FF92C4C532245 /media/Windows ntfs defaults,x-gvfs-name=Windows,x-gvfs-icon=%2Fhome%2Fdarkangel%2FDownloads%2Fwindows_hdd_icon.png,x-gvfs-show 0 0
View 13 Replies
View Related
Jun 6, 2011
I'm kind of new to Ubuntu. Anyways did a fresh install over windows, would crash with this pixilated purple screen. So I tried "safe graphics mode" and it worked. But now that it is installed, how do I get out of it and have it run normally?
Edit: tried to manually install the nvidia drivers, restarted comp and now it wont boot in. Stuck on a black screen and it says "gpu lockup - switching to software fbcon".
View 4 Replies
View Related
Dec 28, 2009
would it be possible to clone an IDE hard disk (on which I installed Fedora 10) on a SATA hard disk, and that programs can succeed
View 10 Replies
View Related
Jan 20, 2011
I recently did a fresh install of 10.10 (previously I had 10.04). I could not do an upgrade because the package manager had a problem with unresolved dependencies resulting from the installation of a Nokia package for my CS-15 usb modem.Since it was a new install, I did fresh backups of everything I needed, including evolution. After the install I tried restoring my email from the backup. Then I noticed that the send/receive button was disabled and so was the option to work online in the file menu.
The version of evolution is 2.30.3.I thought this threadhad an answer to my problem but it appears to be something different. I tried posting to that thread but repeatedly got a database error message. A new thread is probably a better way to go anyhow.I tried deleting the .evolution folder in my home directory (as suggested in that other thread) and then re-installed evolution. That didn't work, however. I still have the same problem.Oddly enough all my account details are still there! I tried checking the supported authentication and that seems to work.I've trawled a number of forum posts in this and other forums but haven't seen this problem described anywhere.
View 4 Replies
View Related
Jun 5, 2011
As the title says, I have a problem with FireFox for some reason it jumped to full screen,and I can't get out of it.
View 6 Replies
View Related
Oct 5, 2010
I just loaded up the Ubuntu 10.04 onto a newly scratch built computer. It went to the desktop after loading up and asking for my password. I then navigated to SYS>ADMIN>DRIVERS and preceded with download of recommended drivers for Nvadia G430 on-board display adapter. Restarted the computer to activate the new drivers and it's stuck in Command Line Mode. I tried Ctrl/Alt/F7 to escape, along with a bunch of other things but nothing will kick this puppy into the desktop.
View 4 Replies
View Related
Jan 26, 2011
I recently did a fresh install of 10.10 (previously I had 10.04). I could not do an upgrade because the package manager had a problem with unresolved dependencies resulting from the installation of a Nokia package for my CS-15 usb modem.
Since it was a new install, I did fresh backups of everything I needed, including evolution. After the install I tried restoring my email from the backup. Then I noticed that the send/receive button was disabled and so was the option to work online in the file menu.
The version of evolution is 2.30.3.
I thought this thread:
Had an answer to my problem but it appears to be something different. (still can't post URLs... not enough posts to date)
I tried deleting the .evolution folder in my home directory (as suggested in that other thread) and then re-installed evolution. That didn't work, however. I still have the same problem.
Oddly enough all my account details are still there! I tried checking the supported authentication and that seems to work.
I've trawled a number of forum posts in this and other forums but haven't seen this problem described anywhere.
How I can get my email to function again?
I have installed Claws Mail and can now access my mail without recourse to a web portal. However, this is a very unsatisfying work-around and I'd really like to get Evolution working again. One very strange thing: shortly after installing Claws I tried Evolution again and for that one session everything was OK. Now it is stuck in offline mode again.
View 4 Replies
View Related
Feb 17, 2010
Card=HDA Nvidia
Chip=Realtek ALC1200
Xubuntu 9.10 64
VLC (also use other video/audio players but this one is my main one.)
I have the speakers plugged into the headphone jack of the audio card. The problem is that I am stuck in either 6ch or 8ch mode, even with the headphone box checked and all relevant settings where they are suppose to be in alsamixer. I am missing sounds plus the volume is lower then it should be over all. Music, for example, does play but it is not the whole song. For example if I listen to one song, it stops all instruments and is suppose to play and guitar solo. But I don't hear it at all.
What I want to do is get it to work in 2ch. I am using Alsa but I have no idea what to edit, or if there is anything I can edit to get to 2ch. I do not want to use pulseaudio at all. One of the main reasons why I won't use Gnome (Ubuntu) right now. I have more headaches with that then I am with this problem.
View 12 Replies
View Related
Mar 7, 2010
My power just flicked off then back on and when my desktop booted back up and I ran startx it loads xwindows into screensaver mode and it's all jacked up, I can't get out of it, no way to log out of xwindows either, only way to shut it down is by killing the processes so how do I clear all xwindows cache or what not so this will stop happening because of right now im locked out of xwindows.
View 2 Replies
View Related
May 1, 2011
I keep getting this error in my log viewer every 2 seconds: Code: ata4: limiting SATA link speed to 1.5 Gbps I have a dual boot SSD and I have run many SMART tests in windows and linux, (using smartmon tools and the disk utility) and the reports are all 100% healthy..... My research shows that this error represents one of the following:
1. Problem with SATA controller
2. Changing BIOS to allow SATA
3. Changing SATA mode to PATA or AHCI
4. Replacing the SATA cable
5. Allowing the SSD to run at SATA II speeds, i.e. 3 Gbps
- Does anyone know how to try number 5, i.e. allowing the SSD to run at SATA II speeds? I am lost here and this problem has caused my machine to crash twice when watching a movie in linux/ ubuntu. (It is worth noting that the crashes have only occurred in linux and I have never had an issue in windows, so it does seem to be a linux setting somewhere, hence why I think it is a "allowing SATA II to run at correct speeds issue")
View 4 Replies
View Related
Jan 23, 2016
It happened when I updated my php5.4 to 5.5 version on my small Debian 7 server. I am only getting GRUB right after BIOS boot pass, then none of the keys working even C or Shift buttons to go to command promt except CTRL+ALT+DEL.
I have tried rescue mode with live CD, selected myserver/root/ partition to install GRUB but not worked.
How to recover my server, I have some important data in it and I don`t want to destroy them.
View 8 Replies
View Related
Mar 29, 2011
I Am considering adding a sound card to my system and I am open to any suggestions. I have a lot of media files and I also do some gaming.
View 1 Replies
View Related
Oct 2, 2014
So I managed to install Debian Jessie on a MSI G70 2PE Apache Pro that came with Windows 8.
First I partitioned some space on the laptop. Then I put on the net install cd for Debian and installed it on UEFI mode. It installed correctly.
Now I'm on Grub and when Debian tries to boot it gets stuck on "Loading initial ramdisk". The cursor under it doesn't even blink. The only way to get out of there is by Ctrl-Alt-Delete. Secure Boot is turned off. Fast boot is also off. If I try to boot on recovery mode gets stuck all the same.
The options on my grub are
Debian GNU/Linux
Advanced options for Debian GNU/Linux
Windows Boot Manager (UEFI on /dev/sda2)
System Setup.
If I choose the Windows option, Windows boots, no problem.
If I choose the edit option for the Debian entry this is what it shows
Code: Select allload_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
[Code] ....
What is happening and what should I try to make this work? Could it be a graphics card issue since this computer has a Nvidia Gpu?
View 1 Replies
View Related
Sep 4, 2010
My GUI seems to be stuck in some sort of debug mode. If a battery or network notification pops up in the upper right hand corner of my screen...there are lines thru the popup (sort of looks like nine slicing), and what looks like a debug message...."<urgencyLevel> - report incorrect urgency?". I'm not sure what might have been done in the system to turn these on....I know they weren't always there.
View 3 Replies
View Related
Nov 19, 2014
Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...
Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.
However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.
Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.
View 12 Replies
View Related
