Hardware :: Can't Enter Set Up Hard Drive Failure?
May 26, 2010
I have (had?) a 36GB 10000rpm disc and a 500GB 7200rpm disc on my machine. I had Windows 7 and Fedora 12 installed on the faster disc with the larger one as storage (for videos etc etc). Yesterday I tried to install Fedora 13 on the fast one wiping off Windows 7 and Fedora 12 in the process. So I told Anaconda just to install on the smaller disc and the install seemed to be going perfectly until it had installed something over 900 of the 1200 or so of the packages it was supposed to be going to install when the monitor screen went blank (black) and the monitor could not detect any video and switched itself off. Trying to switch the monitor on again it still found nothing. Watching the hard-drive and DVD drive lights I waited until it had finished installing (when, of course, it also ejected the disc). I then tried to reboot the computer without the disc and it stopped at the motherboard flash screen as it did (and does) when I try to boot with the Fedora 13 install disc (and also with my old Fedora 12 install disc).
I have not touched the hardware in any way. Before I downloaded Fedora 13 (and after I'd backed everything up) I had opened the case to check how much dust was in the CPU cooler fins but since there was little I just very gently brushed and Hoovered - the machine worked for a couple of hours thereafter while I downloaded Fedora 13 burned it to a DVD and for most of the install as above.I updated the BIOS with ASUS EZ Flash and but it has not solved the problem.
Having disconnected the "faulty" disc I have installed Fedora 13 on the large slower 500GB disc and it works OK but if I connect the faster 36GB disc (before trying to boot, of course) I just get to the motherboard flash screen.If the disc failed why/how did the computer continue to install Fedora 13 from the DVD? Is there any significance in the monitor having gone blank?
I've been running Karmic happily for several weeks now. Today when I came home from work I was greeted by a notification informing me that me external hard drive may be failing due to the fact that it has many bad sectors. I am disinclined to believe this, due to the fact that the hard drive is less than 2 months old. It is a 1 terabyte seagate external drive. Does anyone know whether this is a bug in Karmic, or should I be backing up my data asap?
I was testing out Ubuntu 10.04 on both the a desktop and a laptop (both HP...I don't remember the particular models but if asked I will find out). It worked fine on the desktop. When I booted the laptop with Ubuntu it worked fine. When I tried to connect it to the internet it seemed to go okay. I mean it asked for the network password and everything. But as soon as the signal was recognized I got a warning that said "Hard drive failure is imminent."
Now this laptop has gone through problems before. I don't know the extents because it's a family laptop and I rarely use it (it's super slow. It used to run Vista but now it runs XP and it's slow regardless). I think the hard drive may have been replaced at one point of another and it has had to be re installed numerous times before. And the way it is used leads me to believe that there is not a lot of space left in that hard drive. So that may have been the issue.
But I want to make sure it is a hardware problem and not something that will happen on the device I eventually decide to install Ubuntu on. How to understand why the hard drive would fail when the live CD doesn't actively use the hard drive, at least not the way it would if it had been installed in the hard drive.
After migrating my dual-boot system (XP & Suse 10.3) to a new hard drive my system boots to XP OK but when it begins the linux boot process it gets stuck looking for the old drive, even though I have rewritten the fstab using the old "/dev/sda5" notation to identify the drive. An error comes up referring to the "/dev/by-id" name for the previous drive, not the new one. For some reason the devices are not rescanned as is evident from the contents of /etc/lvm/.cache and the listing under /dev/by-id. Is there some simple way to force a rescan during the boot process?
i have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
It all started about a week after upgrading to Jessie and I had an unusual system failure, in that the CPU went to 100% usage and the hard drive light was on constantly. The keyboard and mouse were were non-responsive. Not having REISUB enabled I did the "stupid" thing and pushed the reset button on the computer. BAD BOY! As a result the computer would not boot and I had to use a live CD to format the drive and install Wheezy (I had the CD).
After installing Wheezy, everything worked well for about 3 days and then it did the same thing. Fortunately I had REISUB enabled and was able to reboot. I looked at the syslog and found a segfault with colord-sane and, after some research that suggested colord-sane might be a problem, I set UseSane=1 in colord.conf . Things seemed to be okay for about 4 days.
Well, after all that I had another problem today with booting. During boot I got an error message saying that there was some hard drive problem and that I needed to log in and run fsck, which I did . There were I believe 4 INODE errors that I was asked if I wanted to repair, to which I responded yes. After that the system booted correctly. After booting and entering the Gnome Classic desktop I looked at the Disk Utility and checked the SMART data. There is now 1 bad sector where before there were none. The drive is a one year old WD 500GB Velociraptor.
Don't know if this is relevant, but in the days before this latest "crash" I had downloaded about 8 movies using bittorrent. Could this have overtaxed the HDD?
I guess my questions are: When fsck "repaired" the disk would it have moved any data from the bad sector to a new location? What may have caused the sector to go bad ? Should I be buying a new hard drive?
The system seems to boot okay,at this time, so I assume that no critical system files were affected. Just curious as to how I should proceed. First is BACK UP my data. Got that !
One more thing I just thought of is that every time it "crashed", I was using LXDE.
I have been researching the web for a program which will allow me to backup my entire hard drive so that I can restore my system if need be. I am however unsure which is the best one to use if I want to achieve this:Somehow I want to back up my hard drive containing my ubuntu system byte for byte so that if the hard drive were to fail I could simply go to the store, get a new hard drive, restore my backup and be up and running again without having to do any re installments of ubuntu or any other programs for that matter.
What is the easiest program that does this? I would like it to support incremental backup.rsync with the "Back in Time interface"?bacula?
after my upgrades i noticed one hard drive was acting funny i was gonna reformat the drive anyway to totally remove winblows from my system grub was installed on the boot sector of the drive that failed how can i get the next drive in line to boot if some one can get me to a howto or tell me what i need to do short there of reinstalling the operating system.
I accidentally deleted the linux mint 8 that was on there due to a small issue discussed on another thread(long story followed by a stupid mistake). after then i reinstalled linux using the .iso i found on the website. all is well. I boot up linux on the external and it runs great. then i turn off the laptop and try to plug it into another laptop( which i used the external hard drive on before and worked) and it went through the bios screen but then after slight lag(5 seconds longer then usual) the blinking cursor in the top left corner would not display anything, anything meaning "booting GRUB" or any other signs of activity. after waiting some time i quit and tried it back on the other laptop, which it was just working on, only to get the same result. I am confused about why it would work the first go around but nothing past that.
The only thing i altered on the external after i installed linux was that i put my home directory into it( from another version of linux mint)
I just installed Fedora 12 on HP Pavilion (dual boot with Windows vista). I made it all the way through the installation and created my user account. A few seconds later I got the login screen asking for my password. I enter the password and get "Authentication Failure."
The name that shows up on the login screen is my full name, not the user name that I created. Is that wrong?
I have installed Ubuntu 8.04 inside windows and every time I go to the terminal and type "su" it asks me for a password. Well the password I set before the install doesn't work, it gives me an authentication failure. I thought that since it was inside windows it didn't set me as a root user. I go to user groups and I see my name there and then "root" above it, but its grayed out. Is there a default root password I can enter?
I'm trying to do exactly this: [URL] the first time i did it, I made it and everything was fine, except I didn't know what "installation size" meant in wubi, so as I selected 3GB, the rest of the partition was left empty and I didn't have enough space for ubuntu. Then I formatted the partition again and reinstalled ubuntu. Since then while it's booting, I get the message Disk boot failure insert system disk and press enter. I tried reinstalling many times, but I still get this message..
I bought a t770.uk HP desktop PC, which came without a Hard drive as the pervious owner had removed it for security reasons. A week later I got a hold of a brand new - out of an anti-static sealed bag - compatible Western Digital Caviar SE 80GB SATA150 7200 HDD, and installed it as directed by my t770.uk manual. Up until now, things looked to be on a roll. As I don't have any windows OS, I figured Ubunutu would be the way to go (and it certainly is from what I've heard and read about it. I can't wait!).
So I sent off for a CD and it popped through my mail a few weeks back. The problem that I am having is after booting past a very brief view of the HP POST screen, the screen goes black with the error "Disc boot failure-insert system disk and press enter". I've tried placing the Ubuntu disc in (assuming it is asking for that? An OS disc) and restarting, and changing the boot order around, but no matter what I do the error persists and I can't install Ubuntu. I really want to get this PC running with Ubuntu.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code: $ sudo hdparm -I /dev/sdb [sudo] password for brian:
I looking for advice on what is the best way for backup on opensuse in case hard disk failure .
I have opensuse as server running samba (with some share folder) and mysql and web service. for mysql backup I run cron job using automysqlbackup script that run 3 times a day (morning , lunch , evening).
in case of hard disk failure, I wish to be put every things on new hard disk in 1or 2 hours.
[System: OpenSuSE 11.0 , kernel 2.6.25.20-0.7-pae, athlon i386] I've recently begun to have problems with my Sata Hitachi disk drive; it stores all my documents and music etc. I've only begun to notice these problems when I installed the Ex2 IFS driver for Windows so I could access my data (read only) from my Windows disk. However, the problem is not exclusive to Windows; Windows blue-screens when the Sata link goes down, but SuSE attempts to re-establish a link. Here's the dmesg output (only includes output relevant to disk activity). I've also run smartcl on the disk, here's the output. Note that the output says that it's soft-resetting the link. Any clues as to what this may infer? Also, the system has sometimes failed to boot as it sees the disk as corrupted and asks me to perform a fsck, which rewrites the journal (although this may or may not have been down to the aforementioned driver possibly not playing nice with the journal, even though it is in read only mode) and restores the disk to working order.
I can have periods of days where the disk works perfectly fine on both Windows and SusE, and random events where the disk link goes down for some reason. The situation seems to be remedied by me physically pushing the Sata cable into the disk and motherboard., and returns when the computer tower is subject to a considerable vibration from a slight knock et cetera. On the other hand, this may be a power problem, some ends on a rail are faulty on my PSU and will only give power to my optical drives if they are positioned in a certain angle, although this is probably less likely as the disks don't go offline, just the link.
I am just wondering if there are any tools for checking the life of the hard disk. I had my hard disk for 4 years. And now I think it is having some problems.Is there any tools I can use to check the condition of the hard disk?
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
I am running CentOS with single hard-disk (no RAID). I frequently saw people lost data because of hard-disk damage or failure.I am wondering if there is a software for monitoring the hard-disk so that we would know in advance and do the backup because thing goes wrong.
