Software :: Create Multiple .iso Cd Or Dvd From Multisession
Apr 1, 2011
If i have, for example, older GParted livecd which i burned in multisession mode(to be able to use rest of its free space later) or other cd|dvd that takes low space on disc itself..can i burn(add) new GParted livecd onto that same disc with choice which one i want run on boot or i need empty cd|dvd? I know that if disk isn't re-writeable with erase option it might be not possible but maybe then there is way to write new .iso and merge with existing content and somehow run from terminal console new one?
View 1 Replies
ADVERTISEMENT
Oct 26, 2010
I'm trying to connect one computer to two others in an ad-hoc infrastructure.
[computer 1] ---- [computer 2] ---- [computer 3]
computer 2 is running Linux and has a single NIC wlan0. I want to it to connect to both computer 1 and computer 3 so each computer can talk to the other. No switch is available so it needs to be an ad-hoc setup.
[Code]...
View 1 Replies
View Related
Mar 7, 2011
I cannot burn DVD's or Cd's in k3b this is what happens:
I cannot burn with both.
I tried K3b and the same thing I got this message.
p, li { white-space: pre-wrap; } Devices
-----------------------
SONY DVD RW DRU-820A 1.0c (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW
[Code]....
View 2 Replies
View Related
Jan 11, 2010
I have a problem while burning a CD-Extra (audio+data in two seperate sessions) in k3b 1.68.0~alpha3-0ub on Karmic. The audio tracks are being burned and the session is closed, but k3b does not start burning the second session. There is the last status message in the log: "Searching previous session" and one near the progress bar: "Closing session". Normally it should close the audio session, eject the burner for resetting his state and begin burning the second session. But in fact it just stops, instead of burning the second session. My only option is to cancel.
I already tried to add -eject into the user options of wodim/cdrecord. It ejects, but it didn't help. The first (audio-)session nevertheless is correctly burned, only the second (data-)session is missing. I tried to switch the writing app to cdrdao (option in k3b), but in this mode k3b dies with a segmentation fault. Only "auto" or "cdrecord" mode works. (In fact "auto" chooses cdrecord). There doesn't seem to be a different version of k3b available in synaptic to try out. I switched over from gentoo, where k3b worked. Unfortunately I cannot remember the exact version of k3b in gentoo. The system was approx. 1 year old.
PS: Is there a native Gnome/GTK app that does CD-Extra? Brasero and GnomeBaker do not support it yet.
Code:
Devices
-----------------------
Optiarc DVD RW AD-7543A 1-00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW]
[code]......
View 7 Replies
View Related
Mar 13, 2011
I use Ubuntu LTS 10.04 with K3B. It seems impossible to write a multisession DVD. I went under the Misc tab and selected errr, something like "Begin multisession DVD" (french menu) but then, the DVD is not recognized as a multisession. I have less than 700 MB written on 2 Phillips DVDs.
View 1 Replies
View Related
Dec 3, 2009
Say I have an Ubuntu Remix that's only 300 MB.
Normally when i burn it to a 700MB CD-R the extra 400 MB is wasted.
Is there a way I can burn a multisession disc from an ISO?
I tried using this command once but it didn't work.
cdrecord dev=0,0 -v -eject speed=16 fs=16m -multi clonezilla-live-1.2.2-31.iso
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 3 = CD-ROM XA mode 2
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '0,0'
scsibus: 0 target: 0 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
wodim: No such file or directory.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
View 3 Replies
View Related
Jan 7, 2010
I tried the above using an existing multisession CD where data files were previously burned in a different pc using K3b. However, when the burning was completed successfully, the CD could not be read at all. I repeated the process with a blank CD choosing to leave it open in order to add more data later. All went well and the CD was readable but when I tried to add data to the same CD I got the message
Quote:
Appending new files to a multisession disc is not advised.
Already burnt files will be invisible (though still readable). Do you want to continue anyway?
I opted not to continue despite the temptation to see how invisible files can be read.
To sum it up, I find this turn of events absolutely appalling given that Brasero is the default software for CD burning in my system (Xubuntu 9.10). Can anyone tell me how to resolve this glaring shortcoming of Brasero so as to keep all my data files easily accessible in multisession CDs?
View 3 Replies
View Related
Aug 27, 2010
how to create multiple users in linux
View 4 Replies
View Related
Aug 3, 2011
How do I divide my hard drive into multiple OS'es/partitions for my test machine? For example:
Win XP
Win 7
Gentoo
Ubuntu
Storage
Can Linux'es share swap area? I was told to leave the first primary for the grub and linux cores.
View 1 Replies
View Related
Mar 15, 2011
Our requirement is to create multiple user account with UID:-
/tmp/users.txt
rohit
guna
samsir
like this 100 user names in /tmp/users.txt file
/tmp/uid.txt
2001
3789
1000134
like this 100 UID's in /tmp/UID.txt file
The script should take input from both the files and create user account. for example user account rohit should have an UID of 2001 and user samsir should have an UID of 1000134.
View 2 Replies
View Related
Apr 17, 2011
i want to create multiple cd's containing the data of one tar.gz file of course i can use data dump (the dd command) to cut the tar.gz into 700 MB pieces. yet then i must calculate the exact location where to cut, and use the skip, seek and count parameters to proceed. Does anybody here know, software that automatically creates 700 MB parts of a single file?
View 2 Replies
View Related
Feb 21, 2011
How can i create multiple users at a time in rhel?
View 2 Replies
View Related
May 31, 2010
Say I have this computer and this computer has a 1TB hard disk. I install Fedora 13 on this disk and let the installer do as it wishes with this 1TB of space. I'm going to end up with the LVM thingy. (Can you tell yet that I know nothing about LVM?). Can I, at a later date, use some of the available space to create another partition to install another OS on. Can I create multiple partitions to install several other OS's on?
View 7 Replies
View Related
Feb 6, 2010
I have a small ubuntu server setup and I would like to create a directory that can be written to by a select number of users. I have a backup directory setup and I want to enable my account as well as three others to be able to read/write to that directory. So far I haven't had any luck.
The owner of the backups folder, a directory on a separate disk mounted under /srv/storage, was owned by root and under the root group. I added the group backups and then changed the backups directory group to backups. I then used chown to change the backups directory to 775 to enable group members to write to it. I then tried to touch a file in the backups folder but no such luck. I did notice that when I run groups, my user account isn't shown as belonging to backups but is shown under the /etc/group file. I even made sure the GID of backups is in fact below 1000.
Anyone have an idea on how to create a shared directory that everyone can create, modify and delete any file? I believe my problem is related to the fact that root is the owner of the backups directory.
View 4 Replies
View Related
Jul 3, 2010
I need to set a NAC (PacketFence) system , i would like to set in my case eth0 to work with several different VLAN'S i created ifcfg-eth0.2 copied from orginal ifcfg-eth0 and changed the ip and append VLAN=yes but when i am triyng to load ifcfg-eth0.2 i get error
I must missed something
My ifcfg-eth0 goes as follow
Code:
My ifcfg-eth0.2 goes as follow
Code:
View 2 Replies
View Related
Aug 27, 2010
Iv got an assignment to complete and I'm stuck at the basic level.
A part of the assigned problem is :
The main process will read the file, and will create N number of child processes (Where N is taken as input) as early as possible before all the children starts its execution. Before creation of each child, the main process should read the file to store all the required data in then corresponding data structure. Child processes should not read the file for getting their information.
As far as my knowledge about this , the child executes before the parent. How do I make the parent not pass the control to it's children before it finishes creating all the children?
View 3 Replies
View Related
Apr 24, 2010
I have an unencrypted DVD that is one big title, ie you cannot skip next / prev. What I want to do is reauthor the DVD with title at certain points, so that I can skip next / prev when watching it.
I'm using Ubuntu 8.10
View 1 Replies
View Related
May 17, 2010
Maybe this isn't the right place, BUT: How can I create an OO Writer template with about 20 input Text Areas? I can make one, and then I thought I could use COPY and PASTE to dupe it in the other places, but it didn't work. I hate to spend all that time creating the other 19 identical boxes.
View 3 Replies
View Related
Apr 29, 2011
I'd like to use Ubuntu to create a multiboot usb pendrive/flashdrive. I know there are a few programs out there that I could use to boot multiple Linux distros from the same pendrive, but I would also like to use the drive to boot some liveCD versions of *BSD and also use it for storage.
View 1 Replies
View Related
Feb 18, 2010
I have 5 files in directory /test1
I want to make symbolic links for all them to my current directory /test2
I tried
But it failed. It seems like I can't make symbolic links for all the 5 files simultaneously.
Often times I need make symbolic links for multiple files with some common pattern (just like ".txt" here). I really hope to avoid making symbolic link for each of them one by one...
View 3 Replies
View Related
Mar 22, 2011
I have Disk /dev/cciss/c0d1: 599.9 GB, unallocated on CentOS release 5.4 .
I need to create about 30-40 LVM's worth 500GB as raw devices for sybase . is there a way to script it or anyone already has it ?
The problem is that each time we need to do fdisk /dev/cciss/c0d1 and enter the partition no to create a new one .. how to overcome that problem and automate it in a script ?
View 3 Replies
View Related
Aug 9, 2010
I'm trying to write a script that will prompt the user for a username/password, then create that user/password in the right groups on all my machines. I know this is kind of a long way around to avoid a NIS server, but I like making my life more difficult.
This is what I have so far:
Code:
the script has 2 problems: The "if" functions return an error and do not compare the strings successfully. whatever password is entered does get applied properly and the user is unable to login
View 7 Replies
View Related
Jul 3, 2010
I need to set a NAC (PacketFence) system (CentOS 5.5), i would like to set in my case eth0 to work with several different VLAN'S i created ifcfg-eth0.2 copied from orginal ifcfg-eth0 and changed the ip and append VLAN=yes but when i am triyng to load ifcfg-eth0.2 i get error
my ifcfg-eth0 goes as follow
# Intel Corporation 82578DM Gigabit Network Connection
# Normal VLAN Lan adapter (Managment)(On-boad 1st NIC)
DEVICE=eth0
[code]....
View 2 Replies
View Related
Feb 4, 2010
I am attempting to create a form in bash that would display multiple radio lists with an OK and cancel button on the bottom. I tried using the command line tool dialog, which is really nice. But it won't let me do multiple radio lists on the same form.
View 2 Replies
View Related
Jan 17, 2011
Looking for a test tool where I can fire up any number of ports (TCP and / or UDP) to listen on.
I am currently getting my using nc but its only 1 port at a time (i know I can open up multiple sessions but thats cumbersome), it can't do UDP, and it closes at the end of the session.
A friend has suggested socat but it looks pretty much the same except it can do UDP, but also cumbersome, I have to manually output to a different file per port, etc.
Basically its so I can quickly test firewall and NAT rules.
View 7 Replies
View Related
May 26, 2010
First post from a very new Linux user....I am trying to create a BASH script that will allow user to provide multiple directory names, Checks if the directory exists and if not create the directory.
I am using the following code:
Which works fine as long as the user enters a single directory name. How can I modify this so it will process all directory names user enters on the read response?
View 5 Replies
View Related
Nov 20, 2010
My partition layout is as follows:
sda1: 14GB / ext4
sda2: 10GB /iso ext4
sda3: 4GB /home ext4
sda4: 86GB Extended
sad5: 2GB swap
I have 84GB free space on this hard drive and want to install another distro. Will I be able to create another / and /home partitions for the new distro?
View 6 Replies
View Related
Nov 19, 2010
In my logs for Apache I have lots and lots of failed attempts for incorrect incarnations of [URL]. None of them are anywhere near my alias for the index.php but yet phpmyadmin is broken. Is there away I can mess up robots like this. Send IP's that create multiple wrong page requests on my server back to their own IP address maybe? I would then just set thresholds to decide how strict to be. I did try fail-to-ban before but it is cryptic. I don't have it on this particular server.
View 2 Replies
View Related
Mar 10, 2010
this blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
View 4 Replies
View Related
Feb 3, 2010
I need to create a single line of output from multiple and variable lines of input in a Linux bash shell script.
My input file looks like this:
Where there may be any number of umsecondaryphonenumber lines; if there is not a umsecondaryphonenumber line for a telephonenumber, I don't want to write any output.
So, the output file should look like:
The script I have so far is:
My question is - how do print each of the elements of an array in one record - i.e. what do I put in place of howdoiprintarray?
View 2 Replies
View Related
