Hardware :: Area Marked "/" Not Accessible By Tablets Cursor
Aug 4, 2010
I recently got an Aiptek Hyperpen Mini. Now I am trying to get it to run under SuSE. The Tablet was sold as "Aiptek Hyperpen Mini". Linux correctly identifies it however as a Waltop Tablet (waltop sells it under the name QPad). It is much closer related to wacom then to aiptek, to the point that waltop offers linux drivers and tools which are mostly identical to the wacom tools. In short: This "Aiptek" uses the wacom driver. At least on a kernel level. I have managed to get the tablet to be recognized and installed correctly. wacdump shows the available data correctly (x/y/pressure/buttons). What doesn't work is X. I am trying to use the tablet in a 2 Monitor environment (screen 1 leftof 0). As long as I treat the tablet as a USB/HID, it acts like a mouse (two buttons, no pressure). Since I need the pressure, I have declared it as a wacom tablet like so:
[code]...
The Area marked "/" is not accessible by the tablets cursor. When entering into it from the left (on Screen0), the cursor jumps to the left screen's white area. Equally, when entering the "/"'d area from the right (on Screen1), the cursor jumps back into the right screen's white area. Somehow the wacom's coordinates get mapped to the screen in a really weird manner. I have tried all combinations of TwinView, MMonitor and ScreenNo with no avail. ScreenNo "0" keeps the cursor on screen 0, but again: only on the right half. Does anyone have a solution for this?
View 4 Replies
ADVERTISEMENT
Feb 2, 2011
I am thinking of getting a graphics tablet for my Fedora box, probably a Wacom Intuos4 or a Bamboo Pen and Touch. I'm looking at those models simply because they seem to be the most popular ones out there. Before I buy I want to know if they work with Fedora 13. The company seems to officially support only Windows and Mac. It is easy to find the drivers and install them? What graphics software do they work with? I've never had a graphics tablet before.
View 4 Replies
View Related
Apr 25, 2015
My UC-LOGIC Maner 850 tablet can't fully functional under fresh debian testing "Jessie".
Code: Select allLinux debrain2 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) x86_64 GNU/Linux
lsusb reports:
Code: Select allBus 002 Device 004: ID 5543:0062 UC-Logic Technology Corp.
dmesg reports:
Code: Select all[66297.932082] usb 2-6: new full-speed USB device number 4 using ohci-pci
[66298.145070] usb 2-6: New USB device found, idVendor=5543, idProduct=0062
[66298.145083] usb 2-6: New USB device strings: Mfr=5, Product=6, SerialNumber=0
[66298.145088] usb 2-6: Product: Maner850
[66298.145093] usb 2-6: Manufacturer: UC-LOGIC
[CODE].....
It looks it should functional well, but... Pen make responses to click (push down the tip), but no luck at move the pen(the pointer won't move, mouse working smoothly)
I have been googled for hours, people occasionly have 'pen moves but no response at click' or even not detected by kernel ...
View 4 Replies
View Related
Jan 31, 2011
A few weeks ago, I was configuring my wacom tablet with the Wacom Control Panel by QB89Dragon, and suddenly xorg crashed. I remember specifically that I was modifying the pressure curve of the pen when it crashed. The screen went black, but the computer stayed on. Since then, every time I start up ubuntu normally, it would show the splash screen, but would then drop me to a black screen. But if I boot up under recovery mode, failsafeX, and generate a new x configuration, and restart X, it will work fine until I restart.
I've tried looking for an xorg.conf, but since I'm running 10.04, I guess it doesn't use an xorg.conf anymore. I tried uninstalling the program I used to configure it, but no go. I tried generating a new configuration with the tablet unplugged, with the tablet plugged in, even with a different tablet. And, since nothing is ever that simple when I do something wrong, nothing so far has worked.
View 3 Replies
View Related
Jul 1, 2010
Im running netbook remix on a eeepc 1005ha. It is my only OS and Im loving it except for one obnoxious quirk. It randomly cuts text and randomly pastes it. If there is something in the clipboard, it will usually paste that, but just as often it will cut random text and paste that. The pastes occur when the cursor focus jumps back to the location of the cursor on the screen. I dont know a better way to phrase that, but thats what it is doing. Say... I put the cursor over the word "pastes" in the paragraph above... even though Im typing in this paragraph, the focus will "jump" to the cursors physical locale (the word "pastes") and then paste whatever is in the clipboard. If the cursor is outside of the textbox, the page will jump to the bottom.
This behavior occurs across programs and in any place text can be entered. I can find no rhyme or reason for it... it just... happens. Sometimes even when Im away from my computer, so its not like Im hitting some key on accident. I have loved everything about this ubuntu distro, but this issue is just toany obnoxious. Writing psych papers on this thing is going to be near impossible if I dont get this fixed before I go back to school.
View 9 Replies
View Related
May 1, 2010
Am running Ubuntu NBR as the sole OS on my Dell Mini 9. Switched over in March to 9.10 NBR. Everything worked fine.Upgraded to 10.04 when it was released. It's awesome EXCEPT for this busy cursor thing.As soon as I log in, all the time my cursor is the spinning wheel of busyness.... It works just as a normal cursor would - my computer also does not seem to be slower due to any operations.If I open an application, the cursor will behave as usual within the window but if I more my cursor to the title bar or switch out of the application, the "busy cursor" resumes.
View 9 Replies
View Related
Jun 23, 2010
I have just installed Ubuntu 10.4 and having problems reinstalling an app I used to use routinely on 9.10 using wine 1.2 - Is there way round this? I tried installing from USB hard drive and CD and just get this: I don't know whether it is a wine or OS issue.The file '/media/Data disc (23 Jun 10)/macromedia8/Fireworks8-en.exe' is not marked as executable.If this was downloaded or copied form an untrusted source, it may be dangerous to run. For more details,read about the executable bit
View 2 Replies
View Related
Sep 22, 2010
I want to run minecraft, but when clicking Minecraft.jar it wont cuz of Ubuntu's policy crap. Is there a way to turn this off, because this is worse than Windows UAC. If not, using Java SDK 6, how can I run it? I'm assuming it's a terminal command since wine lets you get around the restrictions with a sudo wine command.
View 2 Replies
View Related
Jun 27, 2011
when I have updated my ubuntu 10.10 to 11.04, many PPA have been disabled & I can't use them right now. I have checked about them in the repositiries & they are marked as diabled since updated to naty(11.04)...
So my question is, can I enable these repositiries(PPA) ?? Is it safe to re enable them or not ?? if not... what should I do now ?? I have many PPA that have been diabled, such as: rhythmbox,wine,weupd8 team ... much more...
I hope there is a soulution with that, since each time I upgrade my computer to the new version I'm facing this issue..
View 4 Replies
View Related
Jul 6, 2011
Due to this thread -> [URL] we discovered that my Fedora runs rc kernel. After several tries to update to stable one, no result came. I need your guidance to update my system.
What I tried:
yum update
yum update kernel
yum clean all
The result is the message:
[root@dimitris ~]# yum update kernel
Loaded plugins: langpacks, presto, refresh-packagekit
Setting up Update Process
No Packages marked for Update
Can I update to PAE kernel? This question is for i686 cause it cannot recognize all ram (4GB total, 3.2GB available). I run x86_x64 but I have this question...
View 14 Replies
View Related
Aug 5, 2010
So I'm following the online tutorials I've found to install sketchup, and I've run into a snag right off the bat. The instructions I've found say to open the Sketchup exe file by right clicking and selecting open with Wine I do this and I get a box stating that the file is not marked as an executable. How do I fix that? Step by step instructions would be best since I only just installed ubuntu for the first time two days ago
View 1 Replies
View Related
Aug 12, 2010
ubuntu 10.4 Netbook installed in DELL GX270. P4 3G2G memory. Intel 82865G graphic card.using Xmanager2.0 to be a X server in my laptop.How to get rid of the background yellow in the Firefox when I run firefox in Dell but forward the X to my laptop?(see picture)
View 1 Replies
View Related
Jul 1, 2011
I'm new to ubuntu, and I've been trying to get shockwave running on firefox using the instructions here: [URL]. However, when I try to open firefox with wine, I get this message.
"The file '/home/Downloads/Firefox Setup 5.0.exe' is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run. For more details, read about the executable bit."
I looked into this, but I don't understand what I'm doing well enough to assign file permission to this program.
View 6 Replies
View Related
Jul 3, 2011
Today due to losing one of my partitions (I call it here P1) by installing windows xp, I recovered it by "Parted" P1 was a logical partition but now P1 is marked as a Primary one
View 9 Replies
View Related
Feb 3, 2011
I want to upgrade their packages yum update,An error
yum update
Loaded plugins: downloadonly, fastestmirror, priorities
Loading mirror speeds from cached hostfile
* addons: ftp.chg.ru
[code]....
View 2 Replies
View Related
Apr 24, 2011
The system says that there are no updates, even though the version is 5.4:
Basically, all Internet searches yield the same order of actions:
At the update I get: No Packages marked for Update
Content of /etc/yum.conf is:
What else should be done, in order to be able to upgrade to a more advanced CentOS version?
View 4 Replies
View Related
Jun 12, 2009
I've just updated fedora-release* packages, then, after a yum upgrade command I get the message: No Packages marked for Update
View 1 Replies
View Related
May 8, 2011
I did a clean install of 11.04 this morning. Upon logging in, Update Manager appeared, telling me there were 67 packages to upgrade. I obliged, and the update progress window appeared, as usual. At this point I realized it was not a convenient time to install the updates. No progress had yet been made; Update Manager had not downloaded anything, the progress bar had not moved, and the status was "waiting". I canceled the update and closed Update manager. However, upon running it again, it thinks that it successfully installed all the packages. In the "Ubuntu Software Center" Update history, it shows all those packages as having been updated with a timestamp of when I canceled the update. Apt-get and aptitude will not update the packages either. It seems like the packages have been marked as updated even though no update was installed. How can I rectify this problem and get the package managers to actually install the updates?
View 7 Replies
View Related
Dec 17, 2010
I found this really cool guide / info about creating an internet portal where users have to register (their MAC) with the server to use the internet. basically if users MAC's are in the list they get routed to the internet if not they get routed to an internal page asking them to register. It works great and works well. I was wondering if there are some smart people out there who could help me reverse the process.. eg if your mac is not in the list you can access the internet if it is, you are redirected to an internal page saying "youve been blocked"
The firewall rules are as follows.
Code: IPTABLES=/sbin/iptables
# Create internet chain
# This is used to authenticate users who have already signed up
$IPTABLES -N internet -t nat
# First send all traffic via newly created internet chain
[Code]...
View 3 Replies
View Related
May 28, 2011
I'm using an old computer with Lenny for a few weeks. After updating OpenOffice last night from backports to 3.2 and doing an update this morning, there is a long list of packages and libraries in the auto removable section of Synaptic that I suspect or am absolutelt certain that I don't want to remove (Rhytmbox, for example).
View 11 Replies
View Related
Oct 25, 2010
I have been having problems with a lot of my emails being marked as spam or flat out being rejected. After doing some research, it looks like they are being denied due to my HELO and EHLO replies. Here is an example of my header file:
[Code]....
View 2 Replies
View Related
Apr 10, 2010
going through synaptic and noticed that a ton of packages are marked as being manually installed when they most definitly did NOT installed them, is there a command i can use to reset all the dependencies?
View 2 Replies
View Related
Jul 18, 2010
When I try to upgrade from 9.10 to 10.4 the upgrade fails. I am not sure whats going on. I looked at the logs /var/log/dist-upgrade and grepped for hostname and found this:
apt.log:Investigating hostname apt.logackage hostname has broken PreDepends on upstart-job apt.log: Considering upstart 12956 as a solution to hostname 5103 apt.log: Removing hostname rather than change upstart-job main.log:2010-07-18 22:49:07,574 DEBUG The package 'hostname' is marked for removal but it's a ESSENTIAL package main.log:2010-07-18 22:53:01,415 ERROR Dist-upgrade failed: 'The essential package 'hostname' is marked for removal.'
Why is hostname being marked for removal?
View 1 Replies
View Related
Sep 2, 2010
I have just bought a new computer and I want to partition it to be dual booting as I have done a few times in the past.
Currently (alternatively, see attached screenshot):
There are three partitions:
/dev/sda1: FAT16 DellUtility (takes very little space and is of no concern)
/dev/sda2: ntfs RECOVERY (takes up 17.58GB and is marked boot)
/dev/sda3: ntfs OS (the rest of the computer, on which windows is currently installed)
[Code].....
it is safe to delete the current boot partition. I am also not quite clear on when the recovery partition would be used and whether it is really all that necessary (18GB doing nothing seems like a lot to me). Should I make a system recovery media for windows before repartitioning? Also, I am not sure which type of ext partition to use. Finally, I am not sure how big to make the swap space. I think I recall the normal rule being twice the RAM (6GB RAM in my case), but 12GB swap space seems like a lot. Although I do sometimes run memory intensive programs (simulations for research). I normally use other computers for such simulations since they have far more RAM than my computer can possibly have even with a large swap space.
View 9 Replies
View Related
Sep 1, 2011
I've installed wine several times in ubuntu 11.04 but after the installation when i click on the wine icon it gives an warning message "The file 'wine' is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run. For more details, read about the executable bit."
View 1 Replies
View Related
Sep 29, 2010
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
View 6 Replies
View Related
Sep 27, 2010
When I move files from Windows to Linux using a USB drive, all files are marked as executable. Then double clicking on a ".txt" file gets you the ridiculous dialog box asking whether you want to display the file or execute it. (NOTE: The /etc/fstab entry for the USB mount includes the "noexec" option already and it hasn't helped.) Now that my wife and daughters are moving files back and forth between the two OSs, I'm getting pestered for a solution to this and I haven't been able to track anything down. Yet.
What can one do -- presumably on the Windows side of the transfer -- to prevent these files from being marked executable? Or is it a hopeless problem caused by some dainbread decision made by a Windows developer?
View 4 Replies
View Related
May 19, 2011
I've been attempting to, over the past few days, go through the LAMP setup. I already have Apache installed, as well as PHP. However, whenever I attempt to upgrade from PHP from version 5.1.6 to 5.3.6 using "yum upgrade php" I get the message "No Packages marked for updates"..Now I know you're going to want my system info, so based upon my getinfo.sh:Information for general problems.
== BEGIN uname -rmi ==
2.6.18-238.9.1.el5 i686 i386
== END uname -rmi ==
[code]....
View 4 Replies
View Related
Jan 10, 2011
since some days I have a strange problem with KMail (1.13.5) in KDE4.5.5. When I try to copy some text from an email and past it to any other program (e.g. Openoffice), not only the marked text will be pasted, but a kind of HTML code including the text.
This bug is not OpenSuse specific. I found the same bug in a Fedora mailing list (of course, whithout an answer): Strange Copy/Paste behavior in KMail 1.13.5/Kontact 4.4.8
View 6 Replies
View Related
Jun 13, 2009
I always have notification about 1 update in the bar (update applet, red star)When I trying to get the update, I get: "No packages marked for update"
yum clean all
yum update
Loaded plugins: refresh-packagekit
Setting up Update Process
No Packages marked for Update
What wrong with the update applet? (FC11)
View 8 Replies
View Related
