i am trying to connect Internet through wvdial using dialup connection(Xorg is off), m using Ubuntu 11.04 32 bit and Nokia 5130 xpress Music phone.....when i tried to connect with wvdial command , i got the error "subscribe to packet data first" error on cell.....here is my wvdial.conf file...Quote:
[Dialer Defaults]
Modem = /dev/ttyACM0
Baud = 460800
[code]....
I am trying to connect to Internet using Wavecome modem with Airtel GPRS connection. I am able to successfully connect and browse the Internet using wvdial. But if I use pppd, I am getting the error message as "LCP Terminated by peer".
The exact error I am getting is pasted below.
[root@pscu1320 ppp]# pppd call gprs-wavecom
GPRS modem init: press <ctrl>-C to disconnect
Wakeup Modem
[Code].....
trying to connect to the internet using wvdial but facing problems. the command runs fine until i get PID ppd Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Oct 23 10:40:09 2010
--> Pid of pppd: 2520
nothing happens after this.. I checked the resolve.conf and it is empty. i put openDNS server addresses but still did not work.
I use tata docomo as my carrier. I have activated GPRS and many people say that it works perfectly on a laptop with Windows. But I don't use windows. My service provider has not provided us with a username and a password. It works fine without these on the mobile and a laptop with windows. But when I use it on ubuntu 9.10 with wvdial, it exits saying required username and password. How do I overcome this problem.
View 1 Replies View RelatedI am running dnsmasq in debian lenny, wvdial connecting but dnsmasq doesn't work, the /var/run/dnsmasq/resolv.conf file is empty this is /var/log/syslog:
The /etc/resolv.conf and /etc/resolvconf/run/resolv.conf is ok:
This is my /etc/dnsmasq.conf:
[url]
I have BSNL EVDO usb modem and I use wvdial to connect to internet in my Ubuntu 10.04.I want to share my internet over wifi so I can use this on my wifi phones. I searched all over and actually ended up here.
View 2 Replies View RelatedI installed the intel soft modem in the debian lenny, and system can detect the modem, wvdial can dial the phone number but cannot connect to the internet with this error:
No Carrier
The phone number, user and password all are correct and I can connect to the internet in the windows as I post this post in the windows.
my wvdial.conf file content is:
[Dialer Defaults]
Modem=/dev/ttyACM0
Baud=460800
[code]....
Wvdial give me this error
PHP Code:
--> WvDial: Internet dialer version 1.60--> Warning:
section [Dialer Defaults] does not exist in wvdial.conf.
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
I just installed Ubuntu 9.10 and its great. However when I connect to the internet at home it shows that the connection has been established but I still cant connect to the internet. My flatmates are all able to connect. However, I am able to connect from work both wirelessly and through an ethernet cable.
View 2 Replies View RelatedIs it possible to connect to the internet through Wi-Fi on a Red Hat Linux 5 system?
View 6 Replies View Relatedi have installed linux 13 OS from a CD and i have it all working now but am a bit stuck on how to connect to the internet.
View 14 Replies View Relatedhow i can connect terminal to internet so that i can access internet in terminal or download ..... vedio from terminal
View 13 Replies View Relatedi hav already gone through the archlinux installation.now m stuck at installation of gui. but our college uses a cyberoam client. how to get connected to the internet to install xorg nd kde?
View 1 Replies View RelatedI'm new to slackware (and the forums) and I just installed it onto my laptop. I have previously used linux mint, and I like it but I feel that slackware might give me more experience with the terminal, and more original linux ideas. I have kde up and running as far as a window manager, and everything seems to work except connecting to the internet. I have a linksys router. I usually use wifi, but I even tried connecting through an ethernet cord and that didn't work either. I have searched many different threads, but either they didn't address my specific problem, or I couldn't understand what was going on. I tried to configure using "netconfig", but I didn't understand what many of the prompts wanted. I entered a name and a domain name, and selected DHCP, but this did nothing.
View 18 Replies View RelatedThis past fall, I formatted my hard drive and put fedora 12 on. Worked fine until my old hard drive decided to die. During the last few days of dying Fedora stopped being able to connect to my Linksys Wireless G router(I'm hard wired), or detect any connections. I just assumed this was the hard drives fault.
Now, I have a new WD hard drive with Fedora 14 on it and still cannot connect to the internet. I fear worst case scenario would be my ethernet port is dead but I wouldnt know how to detect that. I thought that it might be a problem of drivers also but couldnt find anything on this subject.
[Code]...
I've searched all night for similar threads and either don't understand the instructions or find that my computer simply isn't the same! I've tried to gather as much information as I felt needed when people asked in other threads. Just use small words around me, I'm really *that* technologically inadequet. Why I bought a linux ubuntu computer is still a mystery!
I'm having trouble connecting to my home's wireless internet, which is linksys. I can connect via wire just fine, but I want to access my built-in wireless card. How do I set up the wireless for this machine? Here's the info of what version of Ubuntu and about the card.
Ubuntu 8.04.1
l
Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
What do I do with this information? If I could transfer edible cookies through this computer, I totally would.
I have installed Fedora 14 on my laptop And trying to use MTS MBlaze Mobile BroadBand Connection And its a USB MODEM in order to use usb modem I am using use 3 packages ie
1. usb_modeswitch
2. usb_modeswitch_data
3. wvdial
Its connecting when i Dial using wvdial as below
root@Athreyasa Athreyasa]# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
[code]....
After connecting i am getting ip as 180.215.44.134 gateway as 10.212.64.1 but if i try to browse the Internet using firefox it says no server found error.I tried to ping [URL] and its not pinging after connecting. nslookup also fails against [URL]however if i ping any of the ip that i am getting while connecting it is pinging Also disabled the firewall and selinux is set to disable just in case to check something else is blocking but no luck
I want to connect to the internet on my fedora core 6 OS, i am using an adsl modem(Model no. : SmartAX MT841) which requires setting up a username and password. I am a newbie to linux, so i am clueless and just cant stop wondering what to do!
View 4 Replies View Relatedi have shifted from windows xp to puppy.having 256 mb ram desktop.i have a problem for finding nokia pc suite for puppy for connecting internet from pc to nokia 5230.
View 2 Replies View RelatedI was trying to configure wireless network on my ubuntu machine but could not do it. I am possibly stuck as I don't know much about configuring things on linux platforms.
View 8 Replies View RelatedI have just put a fresh version of Ubuntu 10.04 64 bit on my dell laptop, and I'm having a problem connecting to the internet. Before I installed the os, I tryed it out, as they let you do before a complete installation. While testing, I was asked if I wanted to install the proprietary drivers for the broadcom nic. When I did this, I was able to connect to the internet, however, after the install, I can not seem to update the drivers.
Maybe this was automatically done during installation and now there is another problem, but when I try to connect to my network, after I click connect, it disconnects right away and I am entering all the information correctly.
how to install soft ware to opensuse without connecting to the inter net.I have down loaded softwares. it's a .rar file and read me file didn't contain
View 2 Replies View RelatedI just installed Fedora Core on my Dell Inpsiron B130 laptop and I am having trouble connecting to the internet both wirelessly and with an ethernet cord into the router. When trying to configure my network, I dont recognize any of the ethernet adapters in the drop down list. I have been told that my wireless card is Linux compatible (dell y8029 dell wireless 1370 802.11/a/b/g mini pci). My ethernet card is a B130 Broadcom Ethernet Driver which isnt in the drop down menu either.
I read that I need to download an ndiswrapper but I dont know where to find this download AND even if I could download it to a zipdribe, I have trouble opening a USB flash in Linux becuase its not a "valid block device". This is after the command "mount /dev/sda1 /mnt/usbflash"
My home network is has a Netcomm NB5 ADSL modem with a D-Link DI-524 wireless router (WEP encryption). While I can access the internet using the Vista partition, on the Ubuntu partition, I cannot access anything. Further investigating the problem, I have noticed that there is something wrong with the DNS on the Ubuntu partition. Pinging the IP address of a website (such as linuxquestions.org) loads up, yet, when I type in the Domain Name, there is an endless wait. I have already deleted and re-entered the contents of the resolv.conf file as well as try to change the settings but to no avail.
View 5 Replies View RelatedI am using wvdial to connect to a mobile network (I have a usb modem) and it works fine. However, I wanted to automate the connection a bit (currently I am running wvdial every time I want to connect). I was wandering if there is a way to add this network to /etc/network/interfaces (in a truly Debian way) to have it connect on startup and/or whenever I connect my modem.
View 1 Replies View RelatedI just installed ubuntu 9.10 in my machine... in order to connect to internet(EVDO), through other forums i found out that i'd be requiring wvdial. So i downloaded its source file but i'm having problem installing it... also it seems that wvdial itself requires some other software installed earlier.
View 1 Replies View RelatedI am Using Fedora 13 on My acer aspire laptop. I want to connect to internet through my bluetooth Mobile(Airtel) When I type wvdial at the command prompt, I recieve a message as "Command Not found". I even created a script with name wvdial.conf in /etc. Method to connect to internet through Mobile Bluetooth.
View 8 Replies View RelatedWhen connecting to the internet in Ubuntu 10.04 with an external USB dialup modem, using a terminal and sudo wvdial command, is there a command or some way that will show the modem connection speed?
I checked similar threads, but they don't appear to involve finding dialup modem speeds.
I m trying to show the power of linux to the world bt no body helps me after lots of googling i cant find a proper way to install rpm,gz,bz2 n etc software in linux. without any error. dependency,error,n lots of other problem that i have faced. so being on pt..from last 3 days i m trying to install Wvdial 1.61 bt i m unable to do it. some wvstreams.pc file stoping me. i m really frusted. being a new to linux no one can expect lots of searching by me me..from last 3 days i m just trying traying n only tying..every time Google rediectes me to this site.. This is my last try.
I had compile and install Wvstream.tar.gz file sucssesfully. mainly i dnt knw wheter it is done or undone..then i m trying to install wvdial as my main aim.bt as put the command make...it show some thing like could nt found wvstreams.pc...stop i had personally chk tht file in the pkgconfig folder bt it still shows me that error. i want to connect my cell phone to RHEL5 any how.. i want to use internet in linux..
