General :: Wget Error: Bad Header Line
Jan 22, 2011Why doesn't this work?:
View 1 RepliesWhy doesn't this work?:
View 1 RepliesI am running into a strange problem where kickstart installation fails with Error failed to read Rpm header, This happens when installation starts formatting of disk is also completed some of the rpms installed and then suddenly installer stalls with failed to read rpm header.
I have kept kickstart and install media on same host. I have changed the install media from http/nfs/ftp just to check is there any problem with the media but no luck.
However same installation with the same kickstart file works fine when both install media and ks file is kept on another linux host.
I am using RHEL 4 ,I do checked /var/log/messages it does not give any information on the failure and this started happening recently till that i was using the same server for my linux deployment.
Note: pxe setup, boot server ,install media and ks file all are in same server.
where can i get socket.h header file? will copy pasting this header file in 'incl' directory allow me to use it in the my program?
View 1 Replies View Relatedwhenever I tried to boot into V1 in the following, it hang.
# uname -a
Linux tadpole 2.6.32.12-0.7.1.1381.1.PTF-default #1 SMP 2010-05-20 11:14:20 +0200 x86_64 x86_64 x86_64 GNU/Linux
# cat /etc/*release*
[code]....
After using yast2 and install "xen" hypervisor, the bootloader show "V1" as label for Xen kernel, if I choose to boot into V1, it will just hang with very little message on screen:
ELILO boot: ...
V1
SLES11_SP1
Failsafe
[code]....
I have C++ source code(*.cpp) files that expects it's header files in System's include folder which is/usr/include.The cpp files has include lines like this:
Code:
#include <some.h>
#include <another.h>
[code]...
when i wget aro2220.com it displays
--2011-03-02 16:35:58-- url... 127.0.1.1
Connecting to aro2220.com|127.0.1.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 177 [text/html]
Saving to: 'index.html'
100%
2011-03-02 16:35:58 (12.4 MB/s) - 'index.html' saved [177/177]
However, when I look into the file it is actually blank saying something like "It works! This is the default web page for this server" which can't be correct since that is not what Aro2220.com actually displays.
Furthermore, when I try to wget files I've put on the server for myself it returns a 404, file not found.
Since there are no new ghostscript in repo for suse 10.2, I went to compile it from sources But, when making I got errors ups/gdevcups.c:4743: error: gx_device_cups has no member named header
[Code]...
Googling about this issue doesn't give me any luck version I'm trying to install is 8.64
Give me error when I install softflowd
the problem :
#./configure
give me :
configure error : no BPF header not found
I have a link to a pdf file, and I want to use wget (or python) to download the file. If I type the address into Firefox, a dialog box pops up asking if I want to open or save the pdf file. If I give the same address to wget, I receive a 404 error. The wget result is below. Can anyone suggest how to use wget to save this file?
View 1 Replies View RelatedIf a wget download is interrupted (like if I have to shutdown prematurely), I get a wget.log with the partial download. How can I later resume the download using the data in wget.log? I have searched high and low (including wget manual) and cannot find how to do this. Is it so obvious that I did not see it? The wget -c option with the wget.log as the argument to the -c option does not work. What I do do is open the wget.log and copy the URL and then paste it into the command line and do another wget. This works but the download is started from the beginning, which means nothing in the wget.log is used.
View 2 Replies View RelatedI have an error message that I do not understand nor know how to resolve:
E: encountered a section with no Package:header
E: Problem with MergeList/var/lib/apt/lists/archive.canonical.com_ubuntu_dists_natty_partner_b inary-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache>open() failed, please report.
I hope this is simple for some of you!!! I do not have a clue what this means, I'm pathetic.
I have executed the command
Code:
sudo wget -r -Nc -mk [URL]
(referring the site : [URL]) for downloading entire website using wget for offline viewing on Linux,
At the middle of download I have shutdown my laptop (downloading was not over) and when I started my laptop again. I have executed the same command to continue downloading but I have got the error :
Code:
test@test-laptop:/data/Applications/sites/googlejam$ sudo wget -r -Nc -mk [URL]
--2010-07-25 19:41:32-- [URL]
Resolving code.google.com... 209.85.227.100, 209.85.227.101, 209.85.227.102, ...
Connecting to code.google.com|209.85.227.100|:80... connected.
HTTP request sent, awaiting response... 405 Method Not Allowed
2010-07-25 19:41:33 ERROR 405: Method Not Allowed.
Converted 0 files in 0 seconds.
test@test-laptop:/data/Applications/sites/googlejam$
I use slackware current, and curl and wget give the following errors:
Code:
repo@cannabis ~]$ wget -r http://users.telenet.be/reggersjans
--2010-11-09 13:48:14-- http://users.telenet.be/reggersjans
Resolving users.telenet.be (users.telenet.be)... ::ffff:74.117.221.11, 74.117.221.11
Connecting to users.telenet.be (users.telenet.be)|::ffff:74.117.221.11|:80... connected.
HTTP request sent, awaiting response... 400 Bad Request
[Code]...
Below are the header files and the program:
using namespace std:
I try to download the Tomcat from my LINUX machine with command:
Code:
wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
I got error as follow:
Code:
[root@s003ap23-test opt]# wget -d -v http://archive.apache.org/dist/tomcat/tomcat-5/v5.5.23/bin/apache-tomcat-5.5.23.zip
Setting --verbose (verbose) to 1
[Code]...
I need to install VMWare Workstation on Fedora 13, but I keep running into the following error -
"C header files matching your running kernel were not found...."
It's looking for 2.6.33.3-85.fc13.i686 but when I did a - yum install kernel-devel I got 2.6.33.5-124.fc13.i686
when I do - yum install kernel-devel `uname -r`
I get the following -
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package kernel-devel-2.6.33.5-124.fc13.i686 already installed and latest version
[code]....
i have on my server SUSE Enterprise 11 SP1 installed. When i try to install an rpm it displays this error:
warning: fftw3-3.1.2-113.1.src.rpm: Header V3 DSA signature: NOKEY, key ID
>943d8bb8
> 1:fftw3 ###########################################
[code]....
I'm having some problems compiling mednafen on Suse 11.4. When I run configure, things work fine until I get the following series of errors:
[Code]...
configure: error: *** OpenGL header file not found! I've seen references in a few places that these type ("Present But Cannot Be Compiled") can usually be ignored, but in this case ./configure fails and I can't make. I am unsure why this is, as I've installed mednafen on Suse 11.4 before and it runs fine. I've tried installing various OpenGL-related packages that I can find (Mesa, freeglut, glib, etc) but nothing seems to solve the problem
...../etc/init.d/before.local...System Console Stolen at line: 266 This line of red warning consistently appears immediately after something that ended with /etc/init.d/before.localThis is during the boot.Have anyone see it before ?It appears both in kernel versions:2.6.37.6-0.5-desktop2.6.37.1-1.2-desktop
View 3 Replies View RelatedI have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I have a code over there. It reads a line from file and converts contents of it to double.
Code:
/*
* fileRead.c
[code]...
I'm a linux noob, only know about enough to be dangerous...I am trying to get my Fedora Core firewall to work - I actually didn't know it wasn't until I started poking around in the GUI (I use both CLI and GUI) - so I used the CLI to try and start it and got the following:
[root@linuxbox ~]# service iptables start
Flushing firewall rules: [ OK ]
Setting chains to policy ACCEPT: filter [ OK ]
[code]...
I worte some code, but I got error for complier.
Code is :
#include <stdio.h>
#include <stdlib.h>
[code]...
I am repeatedly getting error:
I need to pass the value of:
I am using #!/bin/bash
This command works on shell without any issue.
I have installed RHEL-5 on a 64-bit machine recently, and want to install java. Earlier when I did "java -version", it showed jre1.4.0. But for my application , I need jre 1.5.0 or later, so I decided to download jre1.6. I am the root user here and I downloaded the jre1.6 as rpm.bin as well as simple .bin format.
But the problem is that when I tried executing any of them, I am getting below error message :
" ./jre-6u16-linux-x64-rpm.bin: line 368: ./install.sfx.20520: cannot execute binary file"
Moreover, now when I tried "java -version", it is not showing any thing.
Could anybody suggest me how can I resolve this deadlock situation, as I need to install my other application at the earliest.
I use Ubuntu, and Google Chrome mostly. How can I kill these HTTP headers, so that my browser caches this data? I believe it is XHR. Here are the relevant HTTP response headers:Cache-Control:no-cache, no-store, must-revalidate Pragma:no-cache.I also have Firefox, is there a plugin or something I can use to not respect "no-cache"?
View 1 Replies View RelatedI'm trying to add a header to many .cpp files in a directory (or directory tree).
My attempt was:
Code:
If I put part of the command inside quotes the substitution occurs, but then I get other errors like:
Code:
cat:
No such file or directory
I could just write a small program to do it.
I am trying to rearrange header in apache but i have run into some problems. i was able to write some with mod_header but i cannot set some headers like last modified and content length. this is what i want to do,
Firstly we have a company that can only read our xml request if the headers are in a certain order and our application doesnt send the headers in that order.
This is how the headers should look like:
And this is how it is right now:
I have used the apache to unset and set most of the but i cannot get all of them to work.
I'm trying to install vmware tools in mint.
All goes well until I get to this -
What is the location of the directory of C header files that match your running kernel? [usr/src/linux/include]
When installing the vmware tools it says to just hit enter and the default will be used.
Hitting enter just keeps giving me the error message- The path "usr/src/linux/include" is not an existing directory.
I need to mirror a website. However, each of the links on the site's webpage is actually a 'submit' to a cgi script that shows up the resulting page. AFAIK wget should fail on this since it needs static links.
View 1 Replies View Related