Ubuntu Networking :: Get Wireless Router To Forward Ftp Requests To Computer?

May 18, 2010

I'm trying to make my wireless router always give me the same ip address every boot (192.168.1.100). I do not have a static ip address from my isp.

Everything I've tried from online help has made my internet break and I'm not even sure what exactly I should be searching for on google.

Ultimately, I'm trying to get my wireless router to forward ftp requests to my computer which shares the network with an xp machine. I think this is the way to go about it.

View 8 Replies


ADVERTISEMENT

General :: Utility To Forward Ports On A Simple Home Networking Wireless Router From Commandline Using Upnp?

Apr 8, 2011

Is there a utility to forward ports on a simple home networking wireless router from commandline using upnp?

View 1 Replies View Related

Networking :: Forward All Http/https Requests ?

May 12, 2010

I have a server (Fedora 12) setup at a client's datacenter and the network is setup to allow me ssh access into the server, but prevents me from opening any connections from the server. However, I need to make http and https request from the server. What I'd like to do is forward all http/https traffic through another machine outside the network.

I've been looking at the documentation for ssh and the various options there and have gotten so far as to enable initiating an ssh connection from the client network back to my machine, but am not sure where to take it from there.

Here are some of the commands I've used so far:

Code:

I'm attempting to bind port 80 to be forwarded through the local machine. I assume I use "ssh -R" to create a dynamic tunnel to forward requests but I must be missing something.

By the way, root login via ssh is disabled.

View 5 Replies View Related

Networking :: Forward Local HTTP Requests To Remote Proxy?

May 4, 2011

How to forward local HTTP requests to remote Proxy with IPTables ?

View 1 Replies View Related

Ubuntu Networking :: Use A Wireless Router On Computer?

Aug 2, 2010

is it safe to use a wireless router on my computer but still keep all my info safe that i am working on in ubuntu forums

View 3 Replies View Related

Ubuntu Networking :: Router - Configure A Wireless Card On Another Computer

Apr 4, 2010

I have a Belkin Wireless G F5D7230-4. I was attempting to configure a wireless card on another computer on my network when it froze during the reboot phase after making settings adjustments. The wired connection is fine, except on that computer that I was making the adjustments from. It won't connect at all. I plugged a friends netbook into the same wired line and it connected. Also there is no wireless signal on any laptops. Mac, Win Linux, don't matter. I tried all the various methods of resetting to default but still when I try to access the router's config page @ http://192.168.2.1 I get the error Code: The server at 192.168.2.1 is taking too long to respond.

[Code]...

View 2 Replies View Related

Ubuntu Networking :: Computer Unable To Find Wireless Signals Despite Right Next To Router

Apr 4, 2011

just switched from Windows Vista to Ubuntu 10.10 on my Toshiba laptop and I'm loving it, except for some wireless connection problems. About 70% of the time, my computer is unable to find any wireless signals whatsoever, despite being right next to the router. When it does find the signal it connects fine and runs great, but most of the time it doesn't show any signals at all. I can't find any pattern to when it does or doesn't find the signal. My result for the "sudo lshw -C network"

[code]...

View 2 Replies View Related

Networking :: Port Forwarding - Router - Ssh Requests Time Out - Tomato Firmware

May 18, 2010

I've managed to confirm that I can reach my home network via ssh from a remote location through my SMC Barricade when it is directly connected to the desktop machine but when the second router is put back into the chain ssh requests time out. The second router is a Linksys WRT 54GL running the Tomato firmware. The chain looks like this: ISP's router (bridged) --> Barricade -->WRT54GL-->desktop

The Barricade has port 22 forwarded to the Linksys' WAN address and it in turn forwards to the desktop address. It appears that it is a setting on the Linksys firmware that is preventing the remote connection. I've looked through the various settings many times but cannot see anything that would cause the problem.

View 4 Replies View Related

Server :: Forward VNC Requests From A To B?

Aug 18, 2010

I'm trying to forward VNC requests from server a to server b, acctually I need the server a to be just VNC proxy and other servers behind server a can be responsible for VNC requests.I did it with this iptables rule but it didn't workAnd for notification all VNC sessions of mine are in range of 59100 to 59199

num target prot opt source destination
1 DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpts:59100:59199 to:bbb.bbb.bbb.bbb

Do you know a better way or a way to fix it with iptables?

View 3 Replies View Related

Ubuntu Servers :: Apache2 : Forward All Requests To Directory ?

Feb 9, 2010

i have a web site and i need to forward all requests to the same page. Basically i would like to show a maintenance page while we are working with our database behind the application and in the meantime i would like to redirect all url in the root directory as following :

http:[url].....

http:[url]....

i tried to perform the action using mod_rewrite in this manner :

Code:
RewriteEngine On
RewriteRule . http://www.mysite.com [L][code].....

The webpage at http:[url]....has resulted in too many redirects. Clearing your cookies for this site or allowing third-party cookies may fix the problem. If not, it is possibly a server configuration issue and not a problem with your computer.

View 2 Replies View Related

Ubuntu :: Forward All Requests Through The SOCKS Proxy Before Sending It To The Internet?

Sep 1, 2011

I am making a content filter for a school. I have a computer with Ubuntu Server and the SOCKS proxy, a DD-WRT router, and a switch. how I could forward all requests through the SOCKS proxy before sending it to the Internet.

View 1 Replies View Related

Ubuntu Networking :: Use One Wireless Router To Connect/detect To Another Wireless Router?

Aug 1, 2010

My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.

View 2 Replies View Related

Networking :: Cannot Ping Wireless Router Or Access Router Settings - Wireless ?

Jun 9, 2010

I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.

I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.

So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?

Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.

We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.

View 1 Replies View Related

Ubuntu Networking :: SSH Connection - Router Works To Except Connection Requests

Jul 28, 2010

I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?

Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?

View 4 Replies View Related

Networking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?

Jun 18, 2011

I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.

As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?

My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?

View 1 Replies View Related

Networking :: Network Setup - Router - Wireless Router Card ?

Apr 24, 2010

I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.

Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.

Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).

The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.

Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).

Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.

Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).

My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?

Here is a link to (picture) my network diagram. Network Diagram

View 2 Replies View Related

Networking :: Get The Wireless Router To Connect To The Other Wireless Router?

Feb 16, 2009

This is my basic setup:

[URL]

I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?

View 1 Replies View Related

Networking :: Using Computer As Router?

Dec 25, 2010

I want to use a linux computer as a router in a medium sized organization. we have around 10MB internet and we have to distribute it among some 2000 pcs. so i have a computer available, and wanted to do some bandwidth management on it (with tc). want to know if this is possible or if it might create a bottle neck.(the internet is coming from 2 different ISPs). Using a router is not an option, coz our organization is happy with what they get currently BUT since its unmanaged it has lots of problems, and also there is no money for buying a router

View 9 Replies View Related

Ubuntu Networking :: Computer Have The Same MAC Address With His Router?

Sep 1, 2011

I have read in a forum that a computer can have the same MAC Address with its router in the sane LAN but how is that possible? Isn't every MAC unique? Also I have not understood, when we send a packet to a PC that is not in our LAN the packet should have the IP Address or the MAC Address of the computer that we want to send?

View 3 Replies View Related

Ubuntu Networking :: Wireless Card - WEP Encryption For Wireless Router Not Allow Me To Connect

May 5, 2011

wlan0 Authentication capabilities :

WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP

Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.

View 2 Replies View Related

Ubuntu Networking :: Tenda W322P Wireless Card Crashing Wireless Router On Connect

Jun 30, 2011

I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.

Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.

View 2 Replies View Related

Networking :: Can Forward Packets Sniffed By Monitor Mode Wireless Interface?

Feb 9, 2011

I'm a student who is working on a wireless research project. I have a madwifi driver for Atheros chipset on Debian Linux. With having the wireless interface get into monitor mode, I want to forward the captured packets from the wireless interface to the other Ethernet interface so that a different computer which is connected to this machine via Ethernet receives those packets. I checked that alll packets are received in the wireless interface using TCPDUMP. I tried to forward those packets with IPTABLES like 'iptables -p FORWARD -i ath0 -o eth2 -j ACCEPT' However, I couldn't see any packets forwarded to eth2 using TCPDUMP.

View 5 Replies View Related

Networking :: Can Ping Each Computer With Router Configuration?

Sep 20, 2010

I have a desktop computer (Ubuntu) connected to one of the LAN ports of the Cradlepoint MBR1000 router via an Ethernet cable. I also have a Verizon mobile broadband USB modem (USB760) plugged into the USB port of the Cradlepoint router.I also have a laptop (Ubuntu) with a wireless wi-fi adapter (802.11g). The laptop also has an Ethernet card but I'm not using it. The desktop computer does not have a wi-fi adapter, only the laptop does.

With the above setup, I have Internet access to both the desktop computer as well as the laptop computer, which I am well pleased with.Is there a way I can have file sharing between the desktop and the laptop, or at least ping between them, the way I have it set up? I can't use the ad-hoc method because for that to work each computer needs a wi-fi adapter. The router is using DHCP but can also be configured manually.

View 14 Replies View Related

Ubuntu Servers :: Firewall / Router Forward Ports

Sep 8, 2010

I have linux server setup on a network with 2 interfaces. One (eth0) is connected to the regular network and the other (eth1) has a DHCP server and transparent web cache listening on it. The machines connected on the eth1 side are on a different subnet and the linux server is there gateway. Untrusted machines are introduced to this network to keep them isolated.

This isolation works well, too well. There are a small set of resources on the regular network I would like to make available to machines on untrustworthy network. I think I need to use iptables but alas I've had no luck in piecing together the command I need (in one case looking myself out and having to physically reset the machine).

View 3 Replies View Related

Networking :: Linux OS As Router / Surf The Web Both On Computer And On Laptop?

Feb 20, 2011

I have two network cards in my computer (Debian). One (eth0) is connected to the router which is connected to the internet, the other one (eth1) is connected to my laptop (Gentoo). Now I want to surf the web both on my computer and on my laptop. I obeyed some tutorials "Linux as router":

1. On my Debian system IP-Forwarding is on:

Code:

takada:/home/sam# sysctl net.ipv4.ip_forward
net.ipv4.ip_forward = 1

2. Laptop has IP 192.168.0.2 and this is the output of 'cat /etc/network/interfaces' on my computer:

Code:

takada:/etc/network# cat interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface

But a ping from my laptop to 192.168.1.1 (router to internet) still gives:

Code:
connect: Network is unreachable

View 4 Replies View Related

Ubuntu :: Install - BOOT Into Windows On A Dual Boot Computer - Damn Wireless Router To Recognize?

Jan 6, 2011

it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.

How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?

View 9 Replies View Related

General :: Forward The Port (22) Through Router For Server - Ssh

Feb 9, 2011

Just setup an ssh server...kinda. I need to forward the port (22) through my router. I have forwarded ports before for programs so the whole thing isnt a mystery. But i need to know what to put in for a couple boxes.... Private ip: ? protocol type: tcp, udp, or both?

View 3 Replies View Related

Ubuntu Networking :: Insert Another Wired Network Card Into The Router-connected Computer

Sep 25, 2010

Would it be possible to insert another wired network card into the router-connected computer, share the internet connection and be able to transfer files between the two?

View 1 Replies View Related

Ubuntu Networking :: Typical Speed From Wireless To Wireless Computer On 802.11g Home?

Jun 14, 2010

I am having trouble with my home network, from one computer to another both using wireless g (Ubuntu 10.04) what transfer rate should I expect/hope for when copying a file from one computer to another? My speed is consistently 220 KBps am I correct in assuming this is pretty bad?

View 1 Replies View Related

Ubuntu Networking :: Router Won't Work On Wireless?

Feb 18, 2010

last night as a download was going the Internet just stopped connection. Then asked me for the WPA & WPA2 personal password. I didn't know what to put since I had already tried multiple pass words I restarted the router.Now for some reason the computer won't pick up the router wireless signal. It picks up multiple connection's around my area so I know that it's not the wireless card. The router is connected via ethernet at the moment so I know the internet works.Do I have to find the ssid? Maybe the router reconfigured it's self when I restart it and broadcasting mode turned off... I just don't know

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved