when i use kickstart to install centos from cdrom (i make it myself in my way),i got a %post script problem with the kickstart file. 1.%post script used to copy my own software from cdrom to hard disk.then make install automaitlly with bash script.
the %post script like :
%post
mkdir -p /myownsoftware
cp -r /mnt/myownsoftware/* /myownsoftware
cd /myownsoftware
[Code]...
I'm trying to install CentOS 5.5 from harddrive using a kickstart file. Kickstart file is read correctly, it contains the following 3 lines (+ additional config):
install
harddrive --partition=sda11 --dir=repos/CentOS/5.5/isos/i386
repo --name="CentOS-5.5 - Updates" --baseurl=hd:sda11:repos/CentOS/5.5/updates/i386
I've downloaded both CentOS-5.5-i386-bin-DVD.iso and CentOS-5.5-i386-bin-1of7.iso, but anaconda (the installer) asks: - What partition and directory on that partition holds the CD (iso9660) images for CentOS? ...
VT3 gives these messages:
INFO: partition /dev/sda11 selected
INFO: mounting device sda11 for hard drive install
INFO: mntloop loop7 on /tmp/loopimage as /tmp/hdimage/repos/CentOS/5.5/isos/i386/CentOS-5.5-i386-bin-1of7.iso fd is 12
[Code]....
we can't get the clients in our lab to do a kickstart install. we're doing the install by booting from the Centos 5.3 net install cd and anaconda starts, but terminates abnormally reporting a SIGSEGV fault. Interestingly, attempts at doing an install from a CD and without the network connection results in this error:
X11TransSocketINETConnect() can't get address for localhost:6001. Temporary failure in name resolution.
In the release anouncement there is mention of adding additional repo's at install time. Is this also possible in the kickstart file?
View 1 Replies View RelatedI have compiled and created a kernel rpm kernel-2.6.18165.11.1.el5-3.i386.rpm
then created initrd image
I have installed the above via kickstart installation
%post
mount xxx.xxx.x.xx:/var/www/html/os/i386 /mnt/tmp
cd /mnt/tmp
rpm -uvh kernel-2.6.18165.11.1.el5-3.i386.rpm
cp initrd-2.6.18-165.11.1.el5.img /boot
[Code]....
I am trying to copy an updated splash.xpm.gz at the end of a system build but everything in the post section is total ignored.
#--- Post-installation script
%post
#!/bin/sh
#...Mount the installation CD
[code]....
Can an unattended Kickstart support both IDE (hda) and SCSI (sda)? The goal is to to create a new virtual machine from scratch. What I have works for Parallels in which a new VM defaults to emulate an IDE hard disk. It does not work for VMware Workstation which defaults to emulate a SCSI disk.
The relevant Kickstart section: bootloader --location=mbr --driveorder=hda --append="rhgb quiet"
clearpart --all --initlabel --linux --drives=hda
part /boot --fstype ext3 --size=100 --ondisk=hda
part pv.2 --size=0 --grow --ondisk=hda
volgroup VolGroup00 --pesize=32768 pv.2
logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow
logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=1024 --grow --maxsize=2048
Can the Kickstart file be made to not care what drive type is there, or conditionally handle either type?
I'd like to install centos from a USB stick on to a hard drive and also include a custom kickstart on the USB stick to run post-build scripts or install additional packages, which the additional packages would also be on the USB stick..Are there any howto's already written?
View 2 Replies View RelatedI have downloaded the following kickstart file for installing minimal < 300 MB space centOS 5.2. I have created a Virtual Machine for Linux and attempting to install CentOS.here is my kickstart file:
Code:
# Kickstart file
#
[code]....
i have vmware workstation with ubunutu server installed now i need to install samba , i use this command
apt-cdrom add after that i check the source.list and the cdrom uncomment then i use sudo apt-get install smbfs, instead of using the cdrom as the source he use internet .
Is it possible to install more than one machine simultaneously with kickstart? I need to install 15 machines.
View 2 Replies View RelatedLaptop has broken internal CDROM. I booted with floppy to get Puppy 431 installed from USB stick. Now I have USB CDROM access thru Puppy. I can mount and see the CD fine.
Is it possible to boot or install from a currently installed linux distro (Puppy)?
I have a second free partition ext2 available, sda2, and GRUB is working fine for me on boot.
(machine also doesn't have boot from USB option, yes, it's old, a project I am working on, I have Nimblex in CD now, I think it's a live cd, I would like to try a few different ones by installing to sda2 and wiping if ng.)
CentOS 5.3 32bit
I'm having trouble trying to copy files from an nfs mounted remote machine during the the post install with kickstart.
My post install:
%post
mkdir /mnt/foo
mkdir /mnt/foo/downloads
mount 206.xx.xx.xxx:/downloads /mnt/foo/downloads
ln -s /mnt/foo/downloads /downloads
sed -i '$ afoo:/downloads /mnt/foo/downloads nfs exec,dev,suid,rw,bg,soft,rsize=8192,wsize=8192 1 1' /etc/fstab
%end
%post --nochroot
cp -r /downloads/thirdparty/importantFolder /mnt/sysimage/opt
%end
I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
I have been trying plop floppy to boot a bootable cdrom from a mobile USB cdrom reader, but the usb cdrom are not recognized.I was thinking that with grub or grub2 or syslinux that would be possible, no ?
View 13 Replies View RelatedDoes anyone know of a way to tell the CentOS installer -not- to use LVM in a kickstart? We've been using a system that lets us define which particular drives to use during the installation as part of our deployment system. This does not work now that LVM is the 'default' in CentOS. I've looked over the options and I see how to FORCE particular LVM configurations, but I see no way to just turn it off.
View 6 Replies View RelatedI created a kickstart file and put it on a floppy. I have installed several times to refine the process and confused. I am not sure if the kickstart file is even being used by grub. I specified
autostep --autoscreenshot The install STILL asks me all those questions I was trying to avoid by doing autostep in the first place, and /root/anaconda-screenshots coes not exist.
I specified
linux = hd:fd0:/ks.cfg
as a Grub command line option. I got that line off a forum, so it may be inaccurate. Anyone know if that is correctd? If I screw that up, shouldn't anaconda complain about file-not-found? Are the screenshots only applicable to graphics mode or also to text mode? (I have been using text mode, assuming text file screen dumps would appear in that subdirectory...)
I am trying to kickstart and want in post install to copy some files from a shared directory, to enable passwd less ssh and having
same users across the clusters. But the cp does not work, nor does .ssh directory is getting created I have pasted my post install script below.
mkdir /mnt/sysimage/mnt/temp
mount -t nfs 10.1.1.1:/home /mnt/sysimage/mnt/temp
cp -f /mnt/sysimage/mnt/temp/passwd /etc/passwd
cp -f /mnt/sysimage/mnt/temp/group /etc/group
[code].....
I have been using the same kickstart more or less since release 5.2 but it fails with 5.5. It looks like it is good all the way to the final stages. Does anyone know what has changed in anaconda for this release? I think the first boot process has changed as well.
View 5 Replies View RelatedI am using the "harddrive" option in a kickstart config to have it pick up isolinux files from a USB flash drive. I have been able to get it work by specifying the device name directly, but if I specify a LABEL or UUID, it does not work.Here is what my ks.cfg looks like.
Code:
install
text
harddrive --partition=LABEL="/install" --dir=/
lang en_US.UTF-8
[Code]...
It almost seems like the version of Anaconda in Centos5.4 does not support specifying UUID or LABELs, but I have not been able to confirm that from the Release notes.Appreciate any tips/references/documentation.
I'm trying to dynamically write command section stubs with a pre-script to be included via %include. The simplest of these contains the disk partitioning commands. Following the canonical examples,[URL].. for one, of this found in every source of documentation for RHEL/Fedora variants does not work. Anaconda attempts to prompt for interaction to get the partitioning scheme and a cmdline install stops with "In interactive mode parttype, can't continue". I've stripped things down to the following two cases:
%pre
cp /mnt/source/disks-ks.cfg /tmp/
%include /tmp/disks-ks.cfg
%post
[Code]...
I am trying to do a kickstart installation of CentOS 5.5 x86 using a static IP on eth1. (The machine has 4 ethernet ports). I set ks, ksdevice, ip, netmask, and noipv6 when the boot disc asks for the init commands.I have similar networking information configured in the kickstart script. I have tried switching the order of the network config lines in the kickstart script to place eth1 at the top. Either way the installation hangs. On tty3 I can see that the command last called is getNetConfig. All of this configuration is using static IPs. I'm not sure why it thinks it has to do anything extra... Is there a problem trying to reuse the same eth1 NIC for the second stage? I have tried using the same and different IPs on the same subnet but nothing changes the outcome. Both the kickstart file and the install tree are on the same subnet, the same server in fact. Both are accessed via FTP but I had this problem with NFS as well.
View 3 Replies View RelatedI went through some conf files under /etc. But cannot find out why cdrom always mounted under /media? Also there is one line in /etc/auto.misc:
cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
Does that mean the cdrom should be mounted under /misc/cd?
I went through some conf files under /etc. But cannot find out why cdrom always mounted under /media? Also there is one line in /etc/auto.misc: cd -fstype=iso9660,ro,nosuid,nodev :/dev/cdrom
Does that mean the cdrom should be mounted under /misc/cd?
I just installed CentOS 5 and am trying to learn how to copy ISO files onto my new install, to practice network installation. The Cdrom doesn't auto mount, which isn't so bad I can mount it using :
[root@rhatserver ~]# mount /dev/cdrom /media mount: block device /dev/cdrom is write-protected, mounting read-only
My question is... I want to copy from the Cdrom... to a new folder, then practice a network install across my network. I can't seem to figure out how to do this... I know that its an ISO file. When I check the name of the file on my Debian system it lists: CentOS_5.3_Final
I created a directory ( just for practice ) calle inst on /
how do I copy that ISO file from the CDrom to the inst directory... I have tried a number of commands as root: All similar to [root@rhatserver ~]# cp -ar /dev/cdrom /CentOS_5.3_Final /inst cp: cannot stat `/CentOS_5.3_Final': No such file or directory
I'm building kickstart files for my various machines.On my xen virtualization servers, I'm trying to get dom0_mem=512M added to the grub kernel line. Unfortunately, the bootloader --append option gets added to the linux kernel line, not the xen kernel line, which doesn't have the desired effect.Is there another way to put this into the kickstart file or should I use sed to put it into grub.conf in my post install section?
View 1 Replies View RelatedFor portability reasons; I am building a standalone kickstart ISO; based of Cent5.2. I am to the point where I can load my ks file (linux ks=cdrom:/ks.cfg), it reads it fine; and performs the install as I want.
Where I am having a problem; is a good way to have the install use upgraded RPM's, not the base; specifically a kernel with a few needed tweaks in it; which is packaged in an rpm.
I attempted to place my kernel rpm's into the CentOS directory and rerun creatrepo; but I simply managed to corrupt the base repo on the install media.
I recently set up a kickstart server using Centos 5. I copied all 7 of the centos 5 install cd's to the tree. I made the install cd, it boots fine. I'm using http, when I'm prompted, I put in the web site: 1.1.1.1 and the Centos directory of /network-install/RPM
I get the following error:
Unable to retrieve [URL]
I've been told the double slashes after the ip address is not a problem, and I've tested that through a browser, by browsing the same location. (not sure if
that's a valid test, but it did find the directory and display the files.)
we use for the installation of our machines bladelogic. We have different servers. Some servers have only one network interface, but it can be 2, 4 or may be more. There is always one network device for using PXE, but it is not always eth0.Is there any way to run kickstart without the entering of the PXE-Device so, that kickstart checks all the network devices in the system?
View 3 Replies View RelatedSystem gets corrupted when I abort a kickstart installationI have a simple kickstart installation of CentOS 5.5 (same issue on 5.3)The only user interaction is the partitioning screen.if, in my cfg file, I state :-
# Partition clearing information
clearpart --all --initlabel
or
[code]....