CentOS 5 :: Kickstart Bootloader Append To Kernel Line
Feb 3, 2010
I'm building kickstart files for my various machines.On my xen virtualization servers, I'm trying to get dom0_mem=512M added to the grub kernel line. Unfortunately, the bootloader --append option gets added to the linux kernel line, not the xen kernel line, which doesn't have the desired effect.Is there another way to put this into the kickstart file or should I use sed to put it into grub.conf in my post install section?
View 1 Replies
ADVERTISEMENT
Mar 3, 2010
I have compiled and created a kernel rpm kernel-2.6.18165.11.1.el5-3.i386.rpm
then created initrd image
I have installed the above via kickstart installation
%post
mount xxx.xxx.x.xx:/var/www/html/os/i386 /mnt/tmp
cd /mnt/tmp
rpm -uvh kernel-2.6.18165.11.1.el5-3.i386.rpm
cp initrd-2.6.18-165.11.1.el5.img /boot
[Code]....
View 2 Replies
View Related
Aug 19, 2010
For portability reasons; I am building a standalone kickstart ISO; based of Cent5.2. I am to the point where I can load my ks file (linux ks=cdrom:/ks.cfg), it reads it fine; and performs the install as I want.
Where I am having a problem; is a good way to have the install use upgraded RPM's, not the base; specifically a kernel with a few needed tweaks in it; which is packaged in an rpm.
I attempted to place my kernel rpm's into the CentOS directory and rerun creatrepo; but I simply managed to corrupt the base repo on the install media.
View 2 Replies
View Related
May 5, 2009
I want a new kernel RPM in my custom CentOS 5 kickstart distro. I built the kernel, got a nice kernel RPM out, and replaced it in my ks.cfg. The install goes fine until the very end, where Anaconda prints some spurious stuff about mkinitrd failing.I get why it might fail -the kernel version argument to mkinitrd was no doubt for the old kernel. But I have no idea where this is -it's not in the ks.cfg afaict, and so I don't quite get where Anaconda / mkinitrd gets it from.
I'd eventually like to use this kernel for the installer as well, but I think I understand that process much better.How do I tell kickstart / Anaconda / mkinitrd to use the new kernel version number?
View 15 Replies
View Related
Feb 12, 2011
I want to append at a new line if the old line is non empty. so it would be something like
Code:
1
2
3//dont add here
Code:
1
2
3
//add here
but if sometimes there could be extra empty line, then add at the empty line. So the script needs to detect whether or not the last line is empty. i figured out the symbol for a new line pattern is ^ so it would probably be sed "a^stuff here"is this right? but i dont seem to get the right result
View 12 Replies
View Related
Aug 10, 2010
The s means substitute
The $ in this particular regex (regular expression) means end of the line.
The ; is what you're subbing. This works fine and well, but what if you want to append a / at the end of the line?
sed 's/$///' filename doesn't work.
View 1 Replies
View Related
Jan 29, 2011
What I am trying to achive is the editing of /etc/ssh/sshd_config I have the line
Code: AllowUsers usera userb
And I want to be able to append to the end of this line from a bash script.I have muddled together from other sites and got the following:-
Code: sed -e "s/^AllowUsers/� userc/" -i /etc/ssh/sshd_config
But this appears to add userc directly after AllowUsers and not after userb
View 2 Replies
View Related
Apr 9, 2010
I have a requirement like this..this just a sample script...
Code:
when i run this scipt...
Code:
Code:
It is appended in the same line...
I want it to be added to the next line.....
I want to do this by explitly using the filehandles in perl....and not with redirection operators in shell.
View 1 Replies
View Related
Nov 6, 2010
Say I have a text file like:
Code:
1
3
4
How would I use ksh to put the number '2' into the second line of that file?Okay it's not bash, it's ksh because this computer is OpenBSD
View 14 Replies
View Related
Apr 8, 2011
Is there a vim command or sequence of commands that will append the current line into the clipboard? Given the example below:
4
5
3
1
2
Lets say I wanted to cut 3, 4, 5 (in that order) then paste them below 2 so that the numbers are in order?
View 1 Replies
View Related
Apr 15, 2009
I am thinking of appending something to each line in a text file with Java. I prefer not write a new file with content appended from the old one.That 'something' would probably be Time Stamp when the file is created (which is same for each line).I am not sure Java provide some easy way for it or not
View 3 Replies
View Related
Jun 8, 2010
I want to append a variable string to the end of a specific line. not like append the same string to each line. like in my file i have 4 columns, i want to add a string in 5th column in some fixed row.
View 4 Replies
View Related
Oct 13, 2010
I have successfully setup a kickstart environment for installing the original Fedora 13 using PXE/DHCP/TFTP. Now I want to build a customized kernel and install it using the same Kickstart setup. After building the new kernel.rpm file, what are right steps to do to replace the original kernel rpm in Kickstart RPM directory, like fixing modules dependency, creating new bzImage and intrid etc?
View 2 Replies
View Related
Apr 10, 2009
I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
View 2 Replies
View Related
Feb 19, 2010
I have to modify formsweb.cfg file in Oracle IAS.
Problem description
In formsweb.cfg file are two lines with labels archive_jini= and archive= at the beginning of line. After equal sign (=) is row of filenames of java archives delimited by coma(,). When I insert a new jar file in java directory, I have to append the very same name of jar file to both lines if that name is not yet present.
Example snippet from formsweb.cfg
View 2 Replies
View Related
Feb 14, 2011
My ubuntu bootloader has 3 kernel to choose,
Ubuntu 2.6.35-26-generic
Ubuntu 2.6.35-25-generic
Ubuntu 2.6.35-22-generic
All can boot into linux, when I use uname -a to check, it has its name as above.
View 7 Replies
View Related
Dec 14, 2010
Does anyone know of a way to tell the CentOS installer -not- to use LVM in a kickstart? We've been using a system that lets us define which particular drives to use during the installation as part of our deployment system. This does not work now that LVM is the 'default' in CentOS. I've looked over the options and I see how to FORCE particular LVM configurations, but I see no way to just turn it off.
View 6 Replies
View Related
Jun 24, 2010
I created a kickstart file and put it on a floppy. I have installed several times to refine the process and confused. I am not sure if the kickstart file is even being used by grub. I specified
autostep --autoscreenshot The install STILL asks me all those questions I was trying to avoid by doing autostep in the first place, and /root/anaconda-screenshots coes not exist.
I specified
linux = hd:fd0:/ks.cfg
as a Grub command line option. I got that line off a forum, so it may be inaccurate. Anyone know if that is correctd? If I screw that up, shouldn't anaconda complain about file-not-found? Are the screenshots only applicable to graphics mode or also to text mode? (I have been using text mode, assuming text file screen dumps would appear in that subdirectory...)
View 7 Replies
View Related
Sep 18, 2009
I am trying to kickstart and want in post install to copy some files from a shared directory, to enable passwd less ssh and having
same users across the clusters. But the cp does not work, nor does .ssh directory is getting created I have pasted my post install script below.
mkdir /mnt/sysimage/mnt/temp
mount -t nfs 10.1.1.1:/home /mnt/sysimage/mnt/temp
cp -f /mnt/sysimage/mnt/temp/passwd /etc/passwd
cp -f /mnt/sysimage/mnt/temp/group /etc/group
[code].....
View 6 Replies
View Related
May 23, 2010
I'm trying to install CentOS 5.5 from harddrive using a kickstart file. Kickstart file is read correctly, it contains the following 3 lines (+ additional config):
install
harddrive --partition=sda11 --dir=repos/CentOS/5.5/isos/i386
repo --name="CentOS-5.5 - Updates" --baseurl=hd:sda11:repos/CentOS/5.5/updates/i386
I've downloaded both CentOS-5.5-i386-bin-DVD.iso and CentOS-5.5-i386-bin-1of7.iso, but anaconda (the installer) asks: - What partition and directory on that partition holds the CD (iso9660) images for CentOS? ...
VT3 gives these messages:
INFO: partition /dev/sda11 selected
INFO: mounting device sda11 for hard drive install
INFO: mntloop loop7 on /tmp/loopimage as /tmp/hdimage/repos/CentOS/5.5/isos/i386/CentOS-5.5-i386-bin-1of7.iso fd is 12
[Code]....
View 4 Replies
View Related
Sep 15, 2010
I have been using the same kickstart more or less since release 5.2 but it fails with 5.5. It looks like it is good all the way to the final stages. Does anyone know what has changed in anaconda for this release? I think the first boot process has changed as well.
View 5 Replies
View Related
Dec 25, 2010
I've just gotten another kernel upgrade, and need to copy it to a bootloader on another Linux sytem, so Fedora will boot, using legacy grub. The problem is that when I check /boot/grub/grub.conf, I get title Fedora (2.6.34.7-66.fc13.i686) root (hd0,2)
[Code]...
It's all Greek to me, but evidently it means something to grub, as that's what is in the Fedora kernel(s) that work. I can't find where this "bunch of stuff" is for the new kernel, so I can paste it into the grub file on the other system. The other system is Linux Mint9, and I've made Mint work using (legacy) grub, and deleted grub2 so that it's no longer Mint's bootloader.
View 4 Replies
View Related
Jul 1, 2010
I installed following this guide but not install a boot loader, because only use this disk (hdd) with centosAfter the installation, restart and I have the following message "missing operating system"any suggestions to solve this problem?or centos can not install without grub?
View 6 Replies
View Related
Apr 12, 2010
when i use kickstart to install centos from cdrom (i make it myself in my way),i got a %post script problem with the kickstart file. 1.%post script used to copy my own software from cdrom to hard disk.then make install automaitlly with bash script.
the %post script like :
%post
mkdir -p /myownsoftware
cp -r /mnt/myownsoftware/* /myownsoftware
cd /myownsoftware
[Code]...
View 10 Replies
View Related
Jan 6, 2010
I have downloaded the following kickstart file for installing minimal < 300 MB space centOS 5.2. I have created a Virtual Machine for Linux and attempting to install CentOS.here is my kickstart file:
Code:
# Kickstart file
#
[code]....
View 3 Replies
View Related
Mar 21, 2011
I am using the "harddrive" option in a kickstart config to have it pick up isolinux files from a USB flash drive. I have been able to get it work by specifying the device name directly, but if I specify a LABEL or UUID, it does not work.Here is what my ks.cfg looks like.
Code:
install
text
harddrive --partition=LABEL="/install" --dir=/
lang en_US.UTF-8
[Code]...
It almost seems like the version of Anaconda in Centos5.4 does not support specifying UUID or LABELs, but I have not been able to confirm that from the Release notes.Appreciate any tips/references/documentation.
View 2 Replies
View Related
Sep 8, 2009
we can't get the clients in our lab to do a kickstart install. we're doing the install by booting from the Centos 5.3 net install cd and anaconda starts, but terminates abnormally reporting a SIGSEGV fault. Interestingly, attempts at doing an install from a CD and without the network connection results in this error:
X11TransSocketINETConnect() can't get address for localhost:6001. Temporary failure in name resolution.
View 7 Replies
View Related
Oct 22, 2009
In the release anouncement there is mention of adding additional repo's at install time. Is this also possible in the kickstart file?
View 1 Replies
View Related
Nov 5, 2010
I'm trying to dynamically write command section stubs with a pre-script to be included via %include. The simplest of these contains the disk partitioning commands. Following the canonical examples,[URL].. for one, of this found in every source of documentation for RHEL/Fedora variants does not work. Anaconda attempts to prompt for interaction to get the partitioning scheme and a cmdline install stops with "In interactive mode parttype, can't continue". I've stripped things down to the following two cases:
%pre
cp /mnt/source/disks-ks.cfg /tmp/
%include /tmp/disks-ks.cfg
%post
[Code]...
View 9 Replies
View Related
Apr 22, 2011
I am trying to do a kickstart installation of CentOS 5.5 x86 using a static IP on eth1. (The machine has 4 ethernet ports). I set ks, ksdevice, ip, netmask, and noipv6 when the boot disc asks for the init commands.I have similar networking information configured in the kickstart script. I have tried switching the order of the network config lines in the kickstart script to place eth1 at the top. Either way the installation hangs. On tty3 I can see that the command last called is getNetConfig. All of this configuration is using static IPs. I'm not sure why it thinks it has to do anything extra... Is there a problem trying to reuse the same eth1 NIC for the second stage? I have tried using the same and different IPs on the same subnet but nothing changes the outcome. Both the kickstart file and the install tree are on the same subnet, the same server in fact. Both are accessed via FTP but I had this problem with NFS as well.
View 3 Replies
View Related
