General :: Use Installation Files Placed On Another System?
Apr 8, 2010i want to boot my system by lan. and then how can i use installation files placed on another system
View 3 Repliesi want to boot my system by lan. and then how can i use installation files placed on another system
View 3 RepliesMy main hard disk died and I replaced it. After installing windows in a small partition in /dev/sda, I thought I will try linux mint and went for it. (I need windows to play AOE, but ubuntu is my primary OS)I didnt see the options properly or some distraction, I choose the "install alongside windows" option probably expecting it to install it in the unallocated partition next to the windows installation. I had completely forgotten my second internal drive /dev/sdb which has the backup data. Linux mint went and installed itself on that drive.
Is there a way to recover individual files from the second harddrive. Now if I boot or open it through live cd, all I see in the linux mint file systems. I want to aleast recover my CV/resume from the second drive. The second drive is a single ext4 file system The old drive is completely dead, it doesnt even get recognized when I attach it to SATA.
I'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
How to find, what are the files (system & user) created after login to the system in RHEL 5.0?
Any single command available?
If I am logged in as root in a linux system and I run command rm -rf on / folder, should it remove all the files? also the kernel?
View 4 Replies View RelatedI cut paste sys folder, tmp folder, and many more folder to a backup storage place , after that folder icon and other icon converted into txt icon , i can make any folder but can't access, can't open storage, thrash disappear, terminal icon disappear, and also the application and places and system icons, after that someone suggested restarting may help but i can't restart it , so i unplugged the power wire and replugged it and restarted the system but it can't open , all things comes fail, and show INIT: "x" respawning too fast: disabled for 5 minutes. after each 5 mins this msg is repeating
View 4 Replies View RelatedI am facing a disgusting problem. While I am trying to update my system using update manager It downloaded the files and then while it starts installation it shows the following message
Code:
(Reading database ... 60%dpkg: unrecoverable fatal error, aborting:
files list file for package 'linux-libc-dev' is missing final newline
[code]....
before i proceed,I'll like to say that I'm a complete newbie, but enjoying my time with Ubuntu.
Recently, due to hard disk failure, some of the System files got corrupted, I have no idea to which files, but booting Ubuntu from the latest kernel is not working, instead I have to select the previous version from the grub screen.
How to recover these files? Is there a way by which Ubuntu automatically scans and repairs the system files.
I'm about to do a migration on a laptop where I have had to make a number of modifications to files mainly in /etc/ but I have lost track of what I have done. Does anyone have any suggestions as to how to identify those files that have been modified from their packaged versions?
View 3 Replies View RelatedI downloaded the first Lenny DVD for amd64, wrote it but on trying the install on my laptop (Gateway NV5389u) I cant get past the installing base system step: I get an error that some files are corrupt / cannot be read from the DVD. I am wondering whether there's a way I can download a minimal version or just the files needed for the base system installation then use the same DVD to install the packages, coz I have a terribly slow internet connection it took me a whole 2 days to download, and I surely cant stand any more of it.
View 4 Replies View RelatedMy HP Netbook crashed. The Windows XP system files corrupted and Windows absolutely will not run. I planned on using Ubuntu to recover it, and then install Ubuntu permanently to save it in the future. Before you ask, every other utility has failed on me. UBCD included, which did nothing but provide me with errors upon errors just trying to run it.
The netbook has no CD drive.The only internet around is a wireless signal... my netbook has a broadcom wireless card that is never recognized. I'm using someone elses working laptop to connect online and get things I need, make boot devices, research for help, etc.This laptop has barely any hard drive space. Currently it has 1 gb remaining for doing anything.I have three flash memory devices:2 gb SD card. My netbook refuses to recognize it as a boot device.2 gb flash stick (that's actually an mp3 player). My netbook refuses to recognize it as a boot device.512 mb flash stick. This DOES work as a boot device.
So far my 512 mb flash stick has run Damn Small Linux and Ubuntu Minimal on my netbook. Of course, both are useless because the netbook cannot access internet, nor does either OS recognize my wireless card. This flash stick is, obviously, too small for a regular Ubuntu installation or any other Linux distribution that can help (as far as I know).
So, in order for this to work, I have to be able to do one of the following:
Install Ubuntu from a different OS, like Damn Small Linux or something small enough to boot on my 512 mb stick. Ubuntu can be put on one of the other, larger devices, maybe to be accessed for installation. No idea how to do this, let alone safely.
Install Ubuntu Minimal OFFLINE. This question was asked multiple times on these forums and none were answered. Is there a way to run minimal, and use offline sources for the install?
Get the normal Ubuntu installer under 500 mb. Its overwhelmingly frustrating that I'm just barely unable to do this. I've read of Ubuntu Customization Kit, which ended up being lots of useless files and reams of gobbldegook. I've heard Ubuntu is packed with additional, nonrequisite software which makes it so large. Why can't there be a halfway version between normal and minimal?? Not everyone has internet and not everyone has a CD drive or large USB stick! Is there a way this can be accomplished? Does this version exist?
I have limited time and resources. Before you ask, no, I cannot afford a larger USB stick. I'm pinching pennies right now and there's nowhere near here that sells them anyway.
Can anyone tell me how to hide files on Linux
View 4 Replies View RelatedI need to compare two binary files and get output in form
for every different byte. So if file1.bin is code...
what is the easiest way to accomplish the goal? Standard tool? Some 3rd party tool?
Some pdf readers for windows allow you to highlight and type notes into PDF files. The pdf readers that I've seen for Linux only allow you to read pdfs. Are there any that allow you to highlight text and add notes?
View 2 Replies View RelatedIs there a way to view all the crontab files, owned by root, users, and other system accounts, that exist on a system simultaneously rather than having to go the individual accounts? The distribution in question here is the Debian 4.0 release.
View 2 Replies View RelatedI have to linux boxes (ubuntu 10 and ubuntu 9), both are in the same network - i can do ping between them- so, I need to pass several files between them and i want to do it using the network, i went to nautilus and then smb://192.168.0.1 but i couldn't connect.
my question is:
-how can I do this?
-do I have to do it using samba?
I just downloaded a computer game which I have never done before even when I had windows and my Ubuntu ( Linux ) used "Transmission" to download it. It downloaded to my desktop and now I have a folder with two files in it on my desktop that when I open say "Write to Disk" and gives me the different options. But I read in the comments on the game I downloaded that I can access ISO and other CD-image files using a program called Daemon Tools which is a windows program used as a virtual CD-Rom Drive. How can I do something like this with Linux?
View 14 Replies View RelatedUsed following command to find out the top 10 big files in the system But it is having its own limitations as it consider files and directories both.
Code:
I would like to get the following information.
1)top 10 big files.
2)top 10 big directories.
File size with human readable output.
As executing
Code:
But when i add -h option for human readable file size its giving me wrong output.
Code:
How to join two ISO image files in Linux?
View 8 Replies View RelatedI am running Ubuntu 8.04 (installed by CD) and an .iso file for Ubuntu 10.04. Normally, we can upgrade system via internet. But it always takes much time to get it, with me it's around 2 hours @_@. What I need is saving time by upgrade the system from what I have (iso file), not via internet.
View 10 Replies View RelatedLinux Error: 23: Too many open files in system..OS: CentOS 5.0, Oracle 10g R2..Application: Microsoft VB6, the application is opening many connections e.g. more than 3000 in 3 minutes and suddenly, the oracle instance is disconnecting and getting "too many open files in system" as error in the listenr.log file.
View 2 Replies View Relatedcopy files from one CentOS system to another one. The files are generated automatically at one server, and i want to copy them immediately to an other server.
View 9 Replies View RelatedI am searching for any system call similar to "ls" command we use in shell. My requirement is knowing the files and directories in curent working directory and process them based on there type. Here as of now I spawn another procees with system command like system
("sh ls -l | grep ^d | awk '{print $9}'").
Instead of this I want to use any system command where I can capture this information directly into my local character buffer. My opinion is that system calls will not spawn another process as a result less time it takes, another reason is once I use the system command again I need to capture the information to a local file then again read it into local buffer. I want to avoid the file manipulation here.
i was browsing one of my friend hard drive using knoppix live CD, i was amazed to find that all the folder which he uses was empty, there was no files present in them, for example there was a folder in /usr/local named web, but when i browsed that folder using knoppix it was empty.I searched for files in every partition but still no result found.
After some time when i placed hard disk back and booted the PC normally, everything was in its proper place. Then i thought to make image of the hard drive and use it on my PC, the image booted well, but still those particular files were missing. I want to know how is that possible? Is there any way to get files from the remote system during bootup?
Due to my inattention, tiredness (and probably stupidity) i've run "chown -R someuser:someuser /" and now all your base are belongs to us the files on the server belong to one user (lol).After system restart, apache, bind9, mysql, and adozen other applications don't start and fill their log files with permission errors.I haven't done any backups on system files, only on the db and website files.Please suggest some ways to revive my web server. I have only 2 month experience with linux,
View 1 Replies View RelatedI have an external hdd which is formatted with fat for use by both on linux and windows. The issue is that I can't delete some of the files I have which show up with size 0. Also, the modification timestamp (as detected by Krusader, the file manager I am using) is 1935. How can I delete these kind of files without affecting the running fs?
View 1 Replies View RelatedI need to split up a large file on windows so I can upload it in parts to a linux machine. I'm looking to do the opposite to this hopefully with some native utilities to keep it simple.
I understand the linux side of the equation to be cat filea fileb > file
what is the simples way to split files on a windows machine which can then be joined together via cat on a linux machine?
Is it possible to write/edit files on HFS+ drive from Linux? Yes I need to disable journaling but how can I disable journaling from Linux? I dont have access to mac.
Or any tool available for doing this?
when in-core copy of inode is updated & after how much time it is updating? is there way to know all opened files on system by different processes?
View 1 Replies View RelatedI need to make a bootable USB stick.
1) How to format it with ext3
2) How to make a master boot record
3) How to create a files system
4) How to put syslinux, syslinux.cfg and a real kernel on the stick