I need to split up a large file on windows so I can upload it in parts to a linux machine. I'm looking to do the opposite to this hopefully with some native utilities to keep it simple.
I understand the linux side of the equation to be cat filea fileb > file
what is the simples way to split files on a windows machine which can then be joined together via cat on a linux machine?
i had got an external USB modem, infact any indian would know that Reliance has this Net Connect which they give by which we can surf through the net. Although fedora is detecting this i dont know as to how i can browse the net using this since all the files are in .exe format which is only compatible with windows.
View 1 Replies View RelatedI'm trying to upload my tar'ed site to server but I have upload limit. My ftp program extracts tar after uploading it. How do I split this one tar into two so I could upload one tar and let it extract itself, and then upload second one and let it extract itself too?
View 1 Replies View RelatedI have a file with 5 columns. Column 4 contains numbers.Is it possible to split the file into multiple files using a condition for the contents of column 4 i.e if column 4 contains a value between 0-10 then print the lines to a new file called less_than_10.txt
View 1 Replies View RelatedI am backing up parts of my computer with DD, and i was wondering if there was a quick way to split the files created into 4.4GB sized files that will fit onto a DVD. Anyone have any idea of how to do this?
View 6 Replies View Relatedstandard Linux installation utilities split the root file-system and the home file-system on two separate but relatively equal-sized partitions? For example, when I put fedora on an 80GB disk, it automatically gave the root file-system 32GB and home 30GB and the swap 8GB of space. However, since my home file-system has a directory with 28GB of files in it, why is my root file-system reading 100% usage? Is the home FS overlaid on top of the root FS? Is there an advantage to doing this? I just made a boot partition (50mb or so), a root partition (90% of the disk space) and a swap (4%-5% disk space).
View 5 Replies View RelatedI used split -b 32m "file.bz2" "file.bz2.part-" to split a file and it created more than 50 parts. From googling, the way I found to reassemble the parts is to cat file.bz2.part-aa file.bz2.part-ab > file.bz2, while enumerating all the 50+ parts. Is there an easier way to reassemble the parts wherein I no longer need to list all those parts explicitly?
I'm using Fedora 12.
Is Linux compatible with MSI eclipse plus motherboard i7 with Geforce 9800 GT graphics card?
View 2 Replies View RelatedI am removing some old graphics from my server and one of the gallery programs have created two enormous directories that I cannot even open with FTP.
I tried to tar each directory and the first came out to about 37gb and the second keeps failing (its bigger one would assume).
How can I archive and split these into smaller files?
Possible Duplicate: How to create a zip file compatible with windows under linux Is that possible. What software will do that?
View 1 Replies View RelatedI am running some Pcap files through editcap and then tshark. I am running fedora 11. This will create a couple of thousand text files all numbered sequentially 1-x. How can I copy these files across a network(I connect using putty) or how can I copy them onto an external HD so that when I view them on the windows machine they have the right formatting (Windows know to open them with wordpad/notepad) basically that windows knows that they are text?
View 11 Replies View RelatedToday encoders are getting smarter. They can compress Blu ray similar quality in 700MB. It seems header of video file contain info about frame rate, audio/video encoder etc. which can't be guessed. In MPEG audio , every part of file is independently playable. If a movie is binary split into 6 parts & I don't have the first part then it is unplayable.
Code:
example
ls
-rwxrwxrwx 1 root root 280M 2010-12-07 20:23 irn2-cd1.mkv
-rwxrwxrwx 1 root root 50M 2011-05-26 13:09 last-50M-cd2
-rwxrwxrwx 1 root root 50M 2011-05-26 13:44 first-50M-cd1
file *
first-50M-cd1: Matroska data
last-50M-cd2: data
irn2-cd1.mkv: Matroska data
How does one split a large linux file and transfer to windows external drive ?
View 2 Replies View RelatedI need a WiFi dongle for Ubuntu and most people at the shops only know if its compatible with windows
View 2 Replies View RelatedI need a command-line method of copying files from a Linux box to a Windows machine that is in a domain and requires authentication. I cannot install additional software or services on the Windows XP machine. I can install any software on the Linux machine. I've tried scp, but the connection failed and if my understanding is correct it is because scp requires that the target (windows machine) be running an ssh service. Is there a command-line linux utility that can pass Windows domain user and password and then copy a file from the linux machine to a share on the windows machine?
View 1 Replies View RelatedI use Ubuntu 9.04 exclusively on my own machines, but I have a couple of flash drives that got infected by some corrupt windows executable (*.exe) files, probably by somebody's trojan (they are Cruzer 4GB so came with installed fancy programs that I dont need but didnt remove and Windows keeps installing unwanted ini files and other trash every time I use them in somebody elses machine or in an internet cafe). I deleted quite a few files, but some are stubborn.
$ sudo chmod +w-X doesnt seem to work. How do I unprotect and remove them? The filesystem is vFAT.
I suspect the files were created by some kind of a trojan as my work requires my flash to be pretty promiscuous.
When I 've backed up all the good files I need, I'd be happy to reformat the flash drives as straight vanilla data storage and retrieval, provided I can still use them on a variety of machines running MS windows as well as on my Linux machines. Any guidance on reformatting?
Kindly read the complete question I know this question has been asked repeatedly
Is there a way to Transfer files between Linux based OS & Windows OS Without using SCP, FTP, TFTP, HTTP, USB, Netcat or samba share?
hard drive formatting, compatibility with Macs, and Windows Etc, suggestions? GUID APM or what else? can I format a hard drive on a linux system that will be compatible witha Mac?
View 3 Replies View RelatedI am looking for a bash script which is compatible with Mac, to find duplicate files in a directory.
View 2 Replies View RelatedI have purchased a DLink Sharecenter Pulse NAS as my PC failed. I wanted to put the two SATA drives in and extract the data before formatting to use as JBOD or RAID. However, before I managed to access my data, the setup software started formatting the drives. I switched it off immediately.
Purchased a SATA to USB2 lead and connected to my work laptop but I cannot see the drive(s). Used Partition Magic and each drive has 3 partitions - of which show about 74GB as used and 2 x 512MB as not. Looks like the drives have been partly set for Linux but the format was not comlete. Have tried to use explore2fs to read them but I cannot access the 74 GB partition only one of the 512MB partitions.
I'm a bit stuck now - any one got any ideas how I can get my files off the 74GB partition before I put them back in the NAS to format.
I am new to Linux.I have installed dual boot, XP(NTFS) and Enterprise Linux Server on same desktop.Now how can I access windows files & folders from Enterprise Linux Server?
View 4 Replies View RelatedI have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
the VBO file that i want to burn into a dvd is around 7.9 gb. i want to know if it's possible to split them in order to burn the files into two diferent dvds.
View 5 Replies View RelatedHow can I split my local mail box into an individual files for each mail. The senario of mine is I fetch some emails from a mail server into my local linux box with fetchmail command but I want each fetched mail in a different indivitual file for easy file processing and manipulation for example sending those email through sms and so on
View 1 Replies View RelatedIs it possible to run exe files on linux, windows files
View 4 Replies View RelatedI have a file of +1 1GB in size. I want to split it in either 100MB rar files or 100MB zip files.
Anybody know what command I need for this?
Please keep it simple, I'm very new to linux. So I'm hoping somebody can give me a command in the lines of "blabla "put file name here" "put file size here" "put folder to rar/zip" here.
I'm looking for a Linux tool that allows me to transcode videos to a video codec that is highly compatible to the Windows platform. We produce large scientific videos from measurements and would like to show those videos during presentations and submit the videos to journals. We want to be as compatible as possible (we can not influence for example the codes installed on the presentation system or on the journal reviewers system).
Virtualdub suggests one of these codecs:
* Radius Cinepak
* Intel Indeo R3.2
* Microsoft Video 1
We tried ffmpeg, mencoder and Virtualdub under wine, none of those tools could produce videos encoded with the aforementioned codecs.
I am using rsync to create rotating snapshot style backups of my web files and sending them via SSH to a remote location in order to burn them for offsite storage. This is all working perfect. The remote machine is a Windows Server 2003 which has data that I combine with my web files before burning. I have cygwin installed on the remote server in order to archive and compress the entire backup using tar. (This is not a post about cygwin, I just thought I would mention it in case anyone was wondering how I was running Linux commands after transferring it to the Windows box). After compression, the backup is over 12gb. The next step in my process is to split this tar.gz file into smaller chunks in order to burn them to DVDs. I use dual layer DVDs which are 8.5gb storage size.
I also use cygwin to split the tar.gz into multiple 2gb files using the split command. When I burn them, I only put 3 files on each disk totaling 6gb to leave some padding in case this was a problem. The burn completes and says successful, although it errors out when in verification. I have tried this multiple times and it seems to fail verification at the same point every time which leads me to believe that it has something to do with the data. I have also done tests such as creating smaller backups with completely different data and brning that to a CD-R which worked fine, so I'm convinced this process can work, I just cant get it to work in the right situation. I have also tried burning one of the 7 split files to a dual DVD which also worked fine. I'm wondering if their is a chunk of data that is causing this problem in one of the other split files?
I want to split audio files at cirtain point in time.
View 9 Replies View RelatedI'm looking for a free alternative to split files into .partXX files. I know this can be accomplished through rar, but it's a shareware and I was wondering if there's a free alternative that accomplishes the same job.
View 6 Replies View Related
