My friend has a Acer Aspire One netbook that runs on linpus. It has difficulty connecting via the internal wi-fi interface to the BT Homehub (802.11n) If I were to pick up a wi-fi adaptor such as:
[URL]
Where could I find the drivers to make this USB stick work?
I haven't had a problem with this yet, but today I was online via my wifi connection and then the network center said there was no connection. My modem said I had full bars, and I tried restarting both the modem and the laptop, but nothing. The internet works if I plug in the ethernet cable, but will not pick up the wifi signal. I called my service provider and for 2 hours they couldn't figure out how to connect it because it has Linux. They tried to set up a new password protected network because they said the modem was working fine, so they had me delete the old network from the computer... but when I tried to set up a new network it still was not picking up a wireless signal. Ive tried flicking the switch on the front of the laptop and it still will not pick up a signal. Please help me out with this... I have no clue how to use Linux!
View 5 Replies View RelatedToday my Menu Bar and WiFi icon disappeared from my desktop. How can I get it back as I am no longer able to connect to the internet , seee my battery status or log out ?
View 3 Replies View RelatedFirstly, apologies if there is anything incorrect about this request for help. Consider me an intelligent but ignorant first time Ubuntu user. I have a USB wifi adaptor, [URL]../B...ef=oss_product, which claims to be Linux compatible. It was supplied with a CD that includes a Linux directory but windows-only documentation. How do I install the drivers etc, the device is currently entirely unrecognised by Ubuntu 10.04.
View 9 Replies View RelatedI just installed the Natty Beta and plugged in a Netgear WG111v3 USB wifi adapter. It is using the RTL8187B driver and worked out of the box. The problem it loses my connection every few minutes. Sometimes not for 10 or 15, sometimes like a minute or less. After it loses the connection, I have to uncheck "enable wireless" (which I assume is the equivalent of bringing down my wireless interface) and then check it again before it will let me reconnect. I don't want to try ndiswrapper because the card works great when it works, including monitor mode and packet injection!
View 3 Replies View RelatedI just installed 10.04, just migrating to linux. I can't see the network manager anywhere. I have the applet installed. I can't get the wifi adapter enabled. The chipset iwl8345 shows on the output when I run config. It seems to me that I need to get the NM up and that should doit. here is ishw:
ubuntu@ubuntu:~$ sudo lshw -C network
*-network DISABLED
description: Wireless interface
product: PRO/Wireless 3945ABG [Golan] Network Connection
vendor: Intel Corporation
[Code]....
i have an Acer Aspire One running Linpus Linux Lite v1.0.21.E and i am having issues with installing Java to the point where it's driving me mad. I want to play Runescape, but the aplett does not initialize. Ive seen numerous guides on how to install it but none of them are clear enough! I am new to Linux so its hard . Could somebody please explain, in depth, how to install Java and get Runescape Working
View 9 Replies View RelatedJust bought a brand new Acer Aspire 5745G, straight away I wanted to install Ubuntu 10.10, I stuck in the cd and rebooted the new laptop that currently only seemed to have Linpus Linux, I then got masses of error messages saying something such as cannot run var/ etc etc and then
:cannot touch 'var/lock/subsys/local': input/output error
and then...
EXT2-fs error (device sda1) : ext2_lookup: deleted inode referenced (lots of numbers here)
It does this for many, many lines then sites there for ages doing nothing and wont allow me to type any commands ( I dont know any command really apart from 'reboot') and then finally after 5 mins or so shows the command prompt [root@localhost /]# but I cant do anything from here.
I've done some searches and found this thread:
url
but startx and system-cofig-display dont work and just says bad commands.
Ive also tried changing the settings so it always reboots from dvd, same problem, made a USB ubuntu start up, forced booting from usb, same again.
I have had my little netbook for over a year now but I must admit, that Linpus and I do not like each other (thinking of having someone put Ubuntu on it - heard thats better).Now I have moved and am trying to get my netbook to access the new internet connection. So far so good. The wireless connection is standing (100% connected), but now I get the message Server not found. I am using Firefox by the way. And yes, I have googled this problem, all plus are plugged, I have been online with this computer before etc.And right now I am online with my second computer, which has no problems accessing the internet.What now? I must also say that for a NETbook I am having a hell lot of trouble going online... Where other computers just connect, this little devil has problems very often.
View 2 Replies View RelatedI recently bought a new notebook and comes with no KDE etc. Can I add this programs? where can I read about using linux?
View 1 Replies View Relatedhave Acer Aspire One netbook with Linux Linpus Lite. I have downloaded Java in order to be able to play Yahoo games, to no avail, each time I try I get the reply "Java is not enabled in your browser" and I cannot get it to work. Is it possible that Yahoo games only work in Windows?
View 1 Replies View RelatedI've just bought an acer aspire one and didn't know the OS was linux. I thought I'd give it a go anyway. I've been researching how to change the desktop type and discovered i need a script reading/writing program to do this. a bit more research told me to download the nano program. I've now done this but have no idea how to go about installing the software.
View 12 Replies View RelatedTiscali had a problem Sunday night(24/25th) reported by a number of people.Passwords rejected, etc.My Windows Vista machine and Aspire One Linpus were both affected.Come Monday morning and the Vista machine now works but Linpus still doesn't.I haven't changed anything on either machine. Tiscali are (of course) not much help.I have now deleted and recreated the accounts with all the same data and ports, etc just in case(!) No change.
View 3 Replies View RelatedI had to reinstall everything on my ACER aspire one, and now I can't unrar rar files with xarchiver. I tried installing ARK but that didn't work, and instead of troubleshooting why Ark isn't working I'd really just like to get Xarchiver to work. I uninstalled and reinstalled using yum but that didn't change anything.I also tried installing the source code of xarchiver 5.0 from a tar.gz, but the ./configure needs to be able to find gtk+-2 and for some reason it can't.
View 1 Replies View RelatedMy operative system is Linpus Linux Lite v1.0.11.E and I am not able to install it and don't know wht!!
View 4 Replies View RelatedOK I do have a file called firefox-3.6.3-tar.bz2 which I downloaded from the mozilla web site. This file sits now in "Downloads". /home/usr/downloads now I want to rename the old firefox 2.0 version just in case I am going to mess up something. I believe the "old" version sits in /usr/lib - so I just can rename this with mv firefox to firefox.old right? if I have done that how can I unpack and install the firefox-3.6.3-tar.bz2 file?
View 1 Replies View Relatedi bought this computer yesterday and the wireless network isn't working. I read that a right click on the network manager icon (top right) should show a list of the available wireless networks, but for me none appear. Ive tried to manually connect to the network by putting the IP address etc, but this still doesn't work. I have been able to connect to the internet but with an ethernet cable. the wireless card is the Atheros AR5001. This is my first time using linux and any help would be great.
View 12 Replies View RelatedI assume the operating system for the Aspire One i have called 'Linpus' made by Linux is designed to be effectively bullet proof (it being a netbook), and as such installing any new programs or modifying anything is a bit more tricky. I didn't realize this, although I am fully behind my choice of Linux over Windows still, I just didn't realize it was a 'lite' version that meant simple tasks were a bit more complex.
That said, would most people suggest changing the OS of this 1gb RAM 8gb HD netbook to a more open version of Linux? If this is even possible or recommended. Not sure what the options are, would love a heads up. But to my main question. I am trying to update drivers on my old Windows DELL Inspiron which I 'nuked' using DBAN (which was loads of fun when I finally got it to work! Loved typing in 'autonuke'!! ) so need to download its wireless driver files i 'nuked' using my Aspire One and Linpus - hopefully directly to the USB Flash drive I have made by Lexar.
However, when I plug in the USB Flash drive to any of the 3 USB ports there is no automatic response. I can't find it using my 'windows knowledge' looking through folders and such, and there is no 'My computer' icon in this Linux Linpus Lite. So where I find my USB Flash drive? Does Linpus support this?
Howto install a printer on Linpus Linux from Acer Aspire one?
View 1 Replies View Relatedmy old firefox is obsolete. I've downloaded 3.6, successfully as far as I can see, but it's just sitting there on the hard drive as a file, it doesn't start up, I just get the same old version 2 which came with the machine and it's dead in the water really.
View 5 Replies View RelatedI own an Acer Aspire One which has Linpus Lite installed. Last night I attempted to delete a couple of files only to find they are read only and that I cannot change the permissions by right clicking and changing the drop down menu from read only.
These aren't protected files or anything, they are files I've downloaded or created myself (one using the onboard web cam to test it).
I attempted to play with Terminal for a bit but as a newbie I got easily lost, not like I can fall back on command prompt knowledge from Windows!
I think it's somehow connected with the user which accesses these docs or tries to change the permissions. I also tried with an su- which meant I was using Terminal as root, however, I wasn't sure how I could then set the permissions for a particular file/folder within the file system.
I have recently installed openSUSE 11.3 I have a Belkin G Wireless Network Adaptor
Model: F5D7050
FCC ID: K7SF5D7050E
Linux doesn't seem to recognise this device at all. I had a look online from another PC for drivers. and they are provided by Belkin themselfs but only for Windows XP/Vista.Is it possible to get this working on openSUSE. I previously used this very same adaptor on an Unbuntu 10.2 PC and it worked with no problems at all.
I have configured my PC to run a linux 2.6 kernel in VMware and have no problem loading the image and using the wired network adaptor and the basic functions. I am having trouble finding the wireless network however. My Box has an " Intel(R) Centrino(R) Advanced-N 6250 AGN " wireless network adaptor. From what I can tell, this is supported by this version of linux. I have the adaptor enabled, my image settings as bridged, and the wimax enabled in the removable devices (connected). When I run WiCD manager I get the error message " Could not connect to wicd's D-Bus interface "
View 1 Replies View RelatedI prefer ubuntu (which I have been meaning to install for a while) but my netbook currently has linpus lite on it. (It's an acer aspire one). One night I left the netbook sitting open (forgot to close it), and when I went to use it the next day, when I started it up, the desktop did not show the normal icons in the background. It still showed the bar at the bottom with the connection icon, power icon, etc. as well as the "Internet" search bar in the top right corner.
But instead of the usual linpus desktop icons, there are just black and white horizontal bars, with some coloured dots in the black bars. I can still use the terminal to open firefox, and presumably other programs. It still connects to wifi signals, and the bottom bar looks normal and functional. I am posting this message right now with my netbook, and it doesn't seem to have lost any functionality. I would much rather just click on things most of the time instead of opening terminal for everything.
I am completely new to linux an have read the replies to similar questions but am unsure of how to access the directory mentioned ~/.gconf/system/networking .I also do not have a system recovery disc or flash drive
View 7 Replies View RelatedI'm trying to use iTunes and poker sites on my acer aspire one with linux linpus lite. I've followed previous threads and learned how to add/remove programs and I've downloaded wine. My wine programs show up under 'other' and I have: wine configuration; wine file; wine boot; wine software ininstaller and winhelp (not sure if the last is wine or not) Just can't navigate my way through any of these to find how to actually RUN wine. Also, if you think this is not the best way to fully use poker websites (I'm not happy with the iphone style no download play) or iTunes.
View 2 Replies View RelatedOS Linux Mint 10, Intel graphics, SIS usb2vga adaptor.
I have three screens. The netbook screen with the extended desktop onto a vga screen and a third screen connected to a usb2vga adaptor.
The extended desktop screens without the usb2vga adaptor works perfectly. I can maximise applications to either screen perfectly without them spreading across both screens. As soon as I connect the third screen via the usb2vga adaptor maximising an application causes it to spread across both screens yet the third usb2vga screen has it's own virtual desktop environment.
I have tried numerous versions of my xorg.conf file that I have generated to incorporate the usb2vga adaptor to make this work and regardless of what xrandr commands I send including changes to the gconf settings nothing seems to solve the issue.
It seems odd that I can create a panel and position it left, right, top or bottom of the second monitor of the extended desktop and it sticks to the screen dimensions yet I can't get any application to do the same when there is a third screen connected through the usb2vga adaptor.
I don't use Compiz, it crashes my system and I don't want separate workspaces I want the extended desktop with the two separate virtual screens to fit on the two separate screens that form part of the extended desktop.
With Xinerama deprecated what other options do I have.
I was wondering if there's any way for a laptop to be both simultaneously connected to a wireless network, while at the same time acting as an ad-hoc network with local access to serve as a wifi connection for my mobile device, which would be ssh-ing into the laptop and using local resources.
View 1 Replies View RelatedPc 1 : netbook with an usb wifi antenna spotted on a free wifi hotspot
Pc 2 : same model netbook that can't access internet
What I need : Share the wifi connection by the 2 internal WLAN on ubuntu by network-manager
I'm currently using the Linux Linpus Lite distribution on my Acer Aspire One netbook. Unfortunately, I'm suffering a problem connecting to a network attached storage drive that is wired to my LAN. I have no problem connecting to this particular device through Windows terminals and the device itself works perfectly. The particular drive in question is a Freecom FSG-3. However, as the file manager in Linpus Lite does not appear to support local networking as a native function, I have tried (unsuccessfully) various methods to overcome this issue. In particular, I have created a folder in the root directory called 'NetFolder.' Following this I right-clicked on this folder and picked the 'Open Terminal Here' option.
I then typed the command line:
I. First attempt I tried: sudo mount -t cifs -o username=[MY USERNAME],password=[MY PASSWORD] //10.0.0.3/fsg NetFolder
II. Second attempt I tried: sudo mount -t cifs -o username=[MY USERNAME],password=[MY PASSWORD] //10.0.0.3 NetFolder
III. Third attempt I tried: sudo mount -t cifs -o //10.0.0.3/fsg NetFolder
IV. Fourth attempt I tried: sudo mount -t cifs -o //10.0.0.3 NetFolder
The username and password I have listed are the credentials I use to access this NAS through my Windows explorer (it allows me to view all the files on the drive and does not give access to specific FTP user accounts). In addition, the 'fsg' following the '10.0.0.3' is the network name for this device (the way it appears is you look for the device on a network management utility). After trying them all of the above combinations, the Terminal application has displayed a number of error messages and I cannot see the contents of the NAS (which I should do if the attempt to add this drive is successful). For example, the error message I received after trying statement I. above was "mount error: can not change directory into mount target NetFolder."
