I'm using cifs to mount windows share.I have created one credentials file and given the path in fstab to mount at boot time. Now i want to encrypt the credentials file and place that in the fstab file.But it is not accepting.. how to use encrypted file to use in fstab,so that normal users can not watch the credentials inside the file.
View 3 RepliesI have the following line in my fstab:
Code:
//192.168.0.242/websites /mnt/supercube cifs rw,user=XXX,pass=XXX,iocharset=utf8,file_mode=0777,file_mode=0777,dir_mode=0777,uid=XXX 0 0
But it doesn't auto mount with everything and disconnects whenever I suspend my computer. The only way to get it to mount is with
Code: sudo mount -a and it mounts fine with no error.
Did lucid change the way it uses fstab or something? Obviously writing mount -a isn't a huge concern, but it kind of destroys the point of putting it in my fstab.
I have mounted window shared partition to my RHEL 5.4 server through following command
Quote:
But I'm unable to mount the same via fstab.172.20.x.x is my windows server download is my shared folder name.
Suggest me correct fstab entries
My current fstab entry is as follows
Quote:
I have the following two lines at the bottom of my /etc/fstab
Quote:
//172.16.6.15/e /tmp/e cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
//172.16.6.15/e/Public /var/www/index/pub cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
My server address is 172.16.6.1.
If the destination (which is my workstation desktop) 172.16.6.15 is offline when the server tries to boot, the entire boot procedure halts with the following message: Unable to find suitable address. mountall: mount <destination> terminated with status 2 The problem is that my server runs headlessly, and every time something silly like this happens where you'd normally expect the OS to continue regardless, I'm forced to plug a monitor in and diagnose on console
So my question: Is there any way to make it proceed with the boot normally despite the host being unreachable? I could probably chuck a mount command into crontab or /etc/rc.local or a /etc/network/if-up.d script, but isn't this the way it really should be done (/etc/fstab)? If so, then we shouldn't expect the entire boot to halt just because a network share can't be mounted, right? While on the topic of a headless ubuntu server 10.10 not booting without some kind of intervention, I have yet another issue: If the server goes down without proper shutdown (power failure, for example) the grub menu displays the kernel choices and there's no countdown timer. Instead, I have to manually press enter to continue the boot. Is there any way around this? Clearly this should not be the case for a server distribution
There are a number of shares on the destination system; for the purposes of this thread I used D$ and F$ (corresponding to those partitions). These shares are mounted permanently via CIFS (entries in fstab) on the source system.Today I copied an ISO image of some 3.5 GB from source (S) to destination (D). md5sum on S gave a different checksum for the source ISO than that calculated by HashCheck Shell Extension for the destination ISO. I know some would argue that I shoud use the same md5sum programm for both images.
To circumvent that I 7zipped the ISO, verified it's integrity and copied that archive from S to D. Verification of the acrchive by the Win version of 7z failed.To see if it's a protocol problem I copied both ISO and archive of ISO to another D this time using sshfs (it's an Ubuntu server). Flawless copies.Then I copied both files to another Win-based server on the same network. Flawless copies.Mystified, I checked the partition's file system integrity (NTFS) where the errors occured. Minor inconsistencies (no errors according to chkdsk). So I copied both files again, once to another partition (D:) of the original D, once to that partition causing the error in the first place (F:).
(D:): archive corrupt, checksum okay
(F:): this time around both okay.
What the hell can I do to nail down the problem?! I don't even know whether it's a problem of the source system or the destination.
this has happened in different distros, so far i have tried slack, arch, and mint at work i have an xp box with a shared folder i created. on my linux box i setup fstab as follows
Code:
//winxp/temp$ /home/user/temp cifs rw,uid=1000,gid=1000,credentials=/home/user/.creds 0 0
this gets mounted correctly and i can read/write the shared folder at home i have a win7 box that i create a share on and use the exact same code in fstab, but it wont mount the share. i get something like permission denied or access denied is there a difference in how winxp and win7 share folders? my usernames on the linux boxes match those of my windows boxes at each location. i have given my win accounts full access and control over the win shares.
I am trying to image about 30 laptops with WinXP, and I am using Clonezilla and DRBL for the task. We will start migration to Win7 starting Q4, so for now we are still using XP. I used a Clonezilla live USB to capture a standardized image to a CIFS/SAMBA share on the enterprise file server. The file server does not support NFS. To deploy the image, I used Virtualbox to build a VM with Centos 5.5 and then later Ubuntu 10.10. I mounted the CIFS share to /home/partimag but I found that I cannot share this CIFS mount out as NFS so I was unable to deploy the image with the image still residing on the CIFS; I had to copy the image to the VM's local drive.
Now using the DRBL live distribution, which is Debian based, I was able to obtain the image from a CIFS share and then share it out to the clients to be imaged as NFS (I think). I was able to use the DRBL live for some older computers, but since that hasn't been updated in nearly 2 years, I think it's missing some device drivers for my newer machines so it doesn't work on them -- this is why I looked at using CentOS and Ubuntu. To mount the CIFS shares, I'm using the following command:
mount -t cifs -o user@domain //share_ip_addr/share_name/folder /home/mount_point
Do I need to do something different to enable the mounted CIFS share to be shared out as a NFS share so that the clients to be imaged can see the contents from the CIFS share as a NFS share? The below image depicts my setup. The workstation has two NICs. The 10 network is the enterprise network and the 192 network is for DRBL imaging only. DRBL/Clonezilla does PXE boot and leases DHCP for the laptops. The laptops are shielded from the enterprise LAN; I am not doing any kind of NAT on on the server. The Linux VM is built with dual NICs and are set to bridged mode so they appear to be a separate NIC from the VM host on the network even though they going into the same port on the wall. [URL]
I have been running a server for 3-4 years now, and my shares have been mounting just fine. Well, the network admin looked at a backup and seen that the last date backed up was june. I got to looking around and seen that the share is not mounting. I can mount it with sudo mount -a, which tells me my syntax is correct. I get an error about IPv4 socket not opened and it is aborting the operation when I run dmesg | tail, since I can use the above command to mount later, it sounds to me like it is trying to mount before the network connection is ready.
I have done some looking over some init scripts and found that in the /etc/rc.d/init.r/netfs script it has a line that states that it is checking to see if the network is up before it starts to mount the filesystems and the such. This is set to no, my question is, can I change this option to yes and get my desired results, waiting for the network to be up before it mounts the filesystems.
We recently moved to a new home and I am trying to get my home file/print server set up again. Thanks to swerdna's excellent website, I got my server box (just upgraded from 11.0 to 11.2) running Samba and serving my shares over the network, and my "client" machines can access them without a problem.However, I'm not having much luck setting up CIFS mounts on my Linux desktop. I have my all-purpose user added to the Samba auth list (via smbpasswd), and configured my client as swerdna's howto's specify, and I can access the files just find. However, when I try to mount the shares with this command:
Code:
mount -t cifs -o username=klein,password=klein //192.168.1.70/sharedmedia /home/zak/SharedMedia/
I get the following error:
[code].....
I've been trying for a while mounting a EMC NAS share on linux. As far as I know the NAS share behaves just like a regular windows share, so the mount process should be very similar. On the NAS server, the disc "Disc1" is shared, and I need to mount a sub-subfolder of that share. This is my line in /etc/fstab:
Code:
//windows_box/Disc1$/folder1/subfolder /var/tmp/mount_test cifs defaults,acl,soft,uid=srvadm,gid=adm,umask=0027,file_mode=0600,dir_mode=0700,credentials=/root/cred.txt,sec=ntlmv2 0 0
When mounting the share, this is what happens:
Code:
[root@server1 tmp]# ll
total 8
drwxr-xr-x 2 root root 4096 Jun 18 10:39 mount_test
[code]....
In the console (i.e. bash), the "mount_test" word on the last line has a red background. When I issue "umount mount_test", everything is back to normal.
We have a homegrown process that runs on a windows box and produces a csv file. We mount the directory these are output to using autofs/cifs and then process them using a program on our linux database servers.
Is there a way from linux, looking at the cifs share, to tell if the target file is currently in use by a process on the windows box? We are having issues where an incomplete file is being processed occasionally.
Q: How do I mount a CIFS share so that my user stevej has all rights to it?
Summary: I can mount the share as root.
mount.cifs //10.x.x.x/Data /home/stevej/Synology/Data/ --verbose -o user=stevej
Using Dolphin in Super-User mode, I can copy files and directories from the share to itself with no errors. Using Dolphin in Normal-user mode. I get the failure "Could not change permissions for...". The file is copied, but its owner,timestamp and permissions are wrong. If a subdirectory is involved, the copy aborts.
Using Windows XP I can copy files and directories from the share to itself with no errors.
Testing: If I mount with uid and gid, then my normal user can not access the share.
mount.cifs //10.x.x.x/Data /home/stevej/Synology/Data/ --verbose -o user=stevej uid=stevej gid=users
[code]...
Synology DS211 - There are 2 users on it. One of which is stevej and the other is julie. Rights RWX are applied to the users and the group called users. All files have stevej as the owner and users as the group with RWX Opensuse 11.4 - There are 2 pc's. One is run as stevej. The other pc runs as julie Windows 2000 - Runs as stevej and maps to the share as stevej.
Works as expected Windows XP - Runs as julie and maps the the share as julie. Works as expected Ultimately, I want the shares to automount at boot, or login and give the user full access. I have been to Swerdna's page and done as much as I can, but still no luck.
I have a router that supports NAS; that is, you can plug a USB drive directly into the router, and it becomes a Windows share. I can manually mount the NAS share and use it properly. But, I would like to have it automatically mount on startup. The main reason for this is to assign it a proper mount point so that I can access it from the command line, since I'm having trouble doing that after I mount it manually.
To mount it manually, I go to Places > Connect to Server, select the "Windows Share" service type, and enter "//192.168.1.1/USB_Storage" as the server name. The server name is supposed to be "//readyshare/USB_Storage," but that does not work, so I used the IP address.
I would like to mount this drive at /mnt/readyshare. So, I followed (I thought) the instruction in this document. I created the directory /mnt/readyshare I assigned myself a samba password with smbpsswd I created a group "readyshare" with the GID 1010 I created a .smbcredentials file in my home directory I modified my /etc/fstab file.The .smbcredentials file reads:
Code:
username=<my username>
password=<the password I created with smbpsswd
The line I added to my /etc/fstab is:
Code:
//192.168.1.1/USB_Storage /mnt/readyshare smbfs iocharset=utf8,credentials=/home/<my username>/.smbcredentials,dir_mode=0775,gid=1010 0 0
But, no dice. The share does not mount.What am I doing wrong?
Hopefully this'll be an easy one (but I wasn't able to find any other posts with the exact same problem).I'm connecting to a large hard drive at work. I can mount perfectly fine. The following is the relevant line in my fstab file:
//XXX.XXX.XXX.XXX/data /mnt/labdata cifs users,rw,exec,suid,dev,username=XXX,password=XXX,_ netdev,fmask=777,dmask=777 0 0
The problem is that when I try to cd to the correct directory, I get a permission denied error. I don't own the mount point, and there aren't general read/write permissions set. But if I change to superuser, I can access it no problem. I can read, write, make directories, etc. So the problem is with my computer--not the remote one.
Now, if I add the option uid=MYID, I can read and write just fine. The system makes me the owner of the directory on mounting. But that's not what I want--I'm trying to allow multiple users access to this file system. I want there to either be a neutral owner (e.g. root) with others having read/write access, or I want the owner of the mount point to be the user currently logged in.
I followed this howto in order to mount CIFS shares on demand. This works great, however, this guide suggests leaving my network passwords unencrypted on the disk. This is a very bad security practice, as the passwords can be easly retrieved by booting the computer using a different OS.
I was looking for a way to secure things up, so I came up with this solution: Instead of storing the passwords plain text on the disk, I store them in a tar file encrypted using GPG. When I boot my system, I open this file to a directory in /dev/shm, and order AutoFS to retrieve the passwords from there.
This does the trick, but I presume this solution is not that secure, since /dev/shm content can be written to the swap partition. Is there any other solution which is a better security practice? Maybe using some sort of keyring service?
On a production server, I want an NFS share to mount automatically. What is the best practice to use?
[Code]...
My understanding is that it is always best practice to use IP addresses in the fstab because the server will fail to mount the share upon booting if DNS is unavailable. I've also been told that if one MUST use names in the fstab, there should be a hosts file entry for it so that the server doesn't depend on DNS on boot.
I have a command line that mounts the disk of my mobile
Code:
It works, but there is a problem with it. Every folder and file has root:root ownership, so I am unable to change anything. Even when I change permissions manually, it does not work.
Now, I want to move this to fstab but have no idea how an fstab line should look like. Obviously, I want to also have rw access to the disk.
I'm trying to add a line to fstab to mount a share on every boot. I can mount the share manually using
sudo mount -t nfs 192.168.2.1:/x_machine /mnt/test
I've added the line
192.168.2.1:/x_machine /mnt/test nfs rw,hard,intr 0 0
to my /etc/fstab file, but it doesn't seem to mount on boot. What am I missing. I tried looking in the log files for an error, but couldn't find anything. Ubuntu 10.04 x64 desktop edition.
Server: Ubuntu Server Edition 8.04
/currently firewalled to only allow client ip
Client: Ubuntu Desktop 8.04
/currently firewalled to only allow server ip
Same userid and groups set up on on both. I have taken two linux courses and can maneuver around fairly well, but am still pretty newbie at all this. We have loaded Samba on a server and created a Samba share. I AM able to access that share via Windows Vista, but have not been able to successfully mount the share on the Ubuntu desktop via the fstab file. I have tried the following ways: serverip:/path/shareddirectory /net ext3 user,sync 0 0 and the samba way..
//serverip/sharename /net smbfs username=x,password=x
After modifying fstab, I reboot. No luck since that either way.Only ONCE after modifying it samba way, I was prompted to enter credentials, but after login I was unable to view the files on the server. From this point on either way, if I run commmand 'mount -a' the response is "Special device serverip:/path/sharedirectory does not exist" Also! I am able to ping client-to-server, but not server-to-client.
I'm having an issue with a Samba server running on an Ubuntu "server". Technically, it's not a server, it's just an old desktop with Ubuntu 10.04 running it..and I have a few server processes running (ProFTP, Samba, etc.)The Ubuntu server is where I store all of my important files that get backed up to a separate hard drive. I shared folders via Samba, and I use two computers to access the shares. I access the shares with an .sh file I created that uses the mount cifs command to mount to those shares.
It has been working flawlessly for a long long time, up until recently. For the past few days to a week, I will try to mount the shares with no result. In the terminal, the commands just freeze, as if the command is trying to execute, but having network issues.The only way I can get it to work is if I reboot the Ubuntu server, then it maps flawlessly. But a day later, it's back to hanging up when trying to mount.
I have a Western Digital "My Book" on my network which I have mounted with cifs.
If I go into it and vi a file, all is fine. I can write and save and close. When I open the file and add to it and then try to write it again, I get the message:
"thefilename" E212: Can't open file for writing
The file is owned by me still and the permissions are -rw-rw-r--
I don't understand why it works the first time and not the second. Also this same effect is observable when I save from another program to there. The first save is fine, the second can not be saved.
Following instructions that I received from the Fedora 10 Guide, I recently edited my etc/fstab file so that I could auto mount my Windows share. It worked the first time, but when I rebooted, I noticed an error saying that Linux could not not unmount the cifs shares. Eventually it did reboot, but now I cannot mount the share at all from fstab. When I run the command #mount -a and then #mount, my share is shown to be mounted although I cannot access it and there is no link to it on the desktop like there was the first time it mounted. I basically want my Windows share to be permanently mounted with read/write permissions. My Distro is Fedora Core 10 64 bit. How can I resolve this issue?
View 3 Replies View RelatedI have a Buffalo Drivestation (model HD-CELU2, 1tb) attached to my network.From my ubuntu desktop I can go to the menu, select "connect to server", put in the ip and share info, and it mounts perfectly.I can open the share and browse eadwrite, but when I try to mount it from a terminal or within fstab, it will still mount, but I cannot see any files that are on the drive. I have about 12gb of data on it, but like I said when I mount it using "mount -t cifs 192.x.x.x/share blah blah blah" I do not see any of the files.If I do a df I can see that the drive has files on it based on the free space available, but if I do an ls nothing shows.
View 7 Replies View RelatedTrying to figure out if there is a way to connect to a cifs share, and only being prompted for one password? ie using the following:
sudo mount -t cifs //goanna/neddy -o username=neddy,iocharset=utf8,file_mode=0777,dir_mode=0777 /mnt/neddy
prompts twice for a password (sudo & the share password). Is there anyway to "catch" the sudo password for the connect? (Long shot!
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I have a Hitachi SimpleNET adapter (entry-level NAS device) on a Seagate FreeAgent 1TB external HDD (formatted ext3). The NAS device is connected over 100MB/s ethernet to a Netgear Wireless G router. All other devices connect using Wireless G. The NAS runs embedded Linux on an ARM processor and it runs vsftpd and Samba for file transfers.
If I transfer a large file using an FTP client the transfer maxes out at around 2.5MB/s. For my purposes that's good enough, especially considering the Wireless G bottleneck. If I transfer a file from a Windows 7 client (using samba) I get around 2.2MB/s. I know the CIFS protocol has more overhead than FTP and the difference in speed isn't that noticeable.Any combination of Ubuntu and Samba results in me getting less than 1MB/s. I've tried mounting it through Nautilus (GVFS) and /etc/fstab. FTP from this same Ubuntu client gets around 2.5MB/s.
I don't have root access on the SimpleNET to change the smb.conf. I've made a few adjustments to the mount options with no success. how to either speed up 10.04 as a Samba client or mount a folder on an FTP server locally? I've tried both curlftpfs and FUSEFTP. With curlftpfs any write operation results in an I/O error and it crashes intermittently. With FUSEFTP I never got that far and couldn't even browse the folder.
I am getting an error when I try to mount a CIFS file-system via terminal:
cifs_mount failed w/return code = -22
If I Places > Connect to server, it will open just fine. The share is also accessible from all the other computers on the network.
Google search brought me here to an archived thread which gave a different error number (!)
Desktop is Ubuntu 10,4LTS/Gnome; fresh install with no additional packages installed (so it's possible I am missing something but not sure what!)
I'm trying to talk the studio I work at into switching one of the departments to linux. (likely kubuntu). So I'm trialling it, but having issues mounting windows shares.It's working great; all except that only Root can write to the mount. I've tried a few different things with fstab, no go.Below is my fstab so far, and you can see the mountpoints.
Code:
# /etc/fstab: static file system information.
#
[code]....
I've been mounting our windows network by opening nautilus and typing in the address bar:
smb://<servername>/share
and I am prompted to log in, all is fine.
however, I need to use some apps where I need to pick the folder from a file list, which I can't get to work with the above connection.
I then created the following line in my fstab file:
Code:
//<servername>/<share> /mnt/fileserver cifs credentials=/home/<username>/.smbcredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
This appears to mount correctly, however there are some filenames on the server with the bullet character() in their name, and by mounting via fstab, the bullet shows as a question mark, but mounting from nautilus shows the bullet.
Anyway I can mount with fstab, and have all characters show properly in the filename?
this subject seems to have been touched a hundred times, but after following all the advice google could provide, i'm still unable to mount cifs shares as user, here's the fstab line
<server> <mountpoint> cifs rw,noauto,credentials=/etc/gattonauth,uid=1000,gid=1000,dir_mode=0770 0 0
i've chowned the mountpoint to the user,
ive tried
chmod +s /sbin/mount.cifs /sbin/mount.cifs
suggested by http://www.linuxquestions.org/questi...-lenny-711337/