OpenSUSE Install :: Can't Automount Cifs Network Drives In Fstab?
May 24, 2011
I just made a fresh install of OpenSUSE 11.4-Tumbleweed and have the latest updates. However fstab lines I've used in the past are not working.
Here's an example of two:
//IPADDRESS/share /home/user/mount cifs credentials=/home/user/.scripts/.creds,_netdev,uid=client_user,gid=users 0 0
//IPADDRESS/share /home/user/mount cifs guest,_netdev,uid=client_user,gid=users
I can execute a command
Code:
sudo mount /home/user/mount and it works, but I'm wanting all my fstab lines to automount at boot as on other machines.
View 5 Replies
ADVERTISEMENT
Aug 3, 2010
I have been running a server for 3-4 years now, and my shares have been mounting just fine. Well, the network admin looked at a backup and seen that the last date backed up was june. I got to looking around and seen that the share is not mounting. I can mount it with sudo mount -a, which tells me my syntax is correct. I get an error about IPv4 socket not opened and it is aborting the operation when I run dmesg | tail, since I can use the above command to mount later, it sounds to me like it is trying to mount before the network connection is ready.
I have done some looking over some init scripts and found that in the /etc/rc.d/init.r/netfs script it has a line that states that it is checking to see if the network is up before it starts to mount the filesystems and the such. This is set to no, my question is, can I change this option to yes and get my desired results, waiting for the network to be up before it mounts the filesystems.
View 6 Replies
View Related
Jan 30, 2010
Question 1.I have strange problem in OpenSUSE 11.2I have /etc/fstab entry:
//server/projects /server/projects cifscredentials=/root/.credentials,dir_mode=0777,file_mode=0777,_netdev 0 0
service network running
[code]....
View 1 Replies
View Related
Jul 15, 2010
i'm trying to setup a permanent CIFS share from my nas, but it keeps prompting for a password dispite GUEST access set on the share.FStab is as follows:
Code:
//192.168.0.253/media/ /mnt/nas1_media/ cifs guest,_netdev 0 0
if i do
[code]....
View 5 Replies
View Related
Sep 10, 2010
I have set up two external hard drives to automount in fstab with the following lines:
/dev/sdb1 /media/DownstairsBackup ntfs-3g rw,auto,user,exec,sync 0 0
/dev/sda1 /media/UpstairsBackup ntfs-3g rw,auto,user,exec,sync 0 0
And right after I restart, all users have permission to read and write, and everything is fine. However, I have an automated backup utility (BackinTime) installed to back up particular (mounted network) directories every night, but whenever I check up on it the next day, I get the error "Unable to mount ..... Authorization required". (These network directories are mounted into the local filesystem in fstab as well.) Oddly enough, if I run BackinTime by hand as the users, it works fine. I'm running 10.04 LTS.
View 1 Replies
View Related
Jul 29, 2011
After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab
[Code]...
In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.
View 6 Replies
View Related
Jul 9, 2011
I succeed in uTorrent server's install as a daemon in Opensuse 11.4 and it works great. I've already change my fstab file to add a network drive to be mount on startup localize in /mnt/freebox/. This is also working great. The issue is during the startup, utorrent starts before fstab and thus the network drive is unmount.
In my utorrent init.d daemon script, I ask for $Network starts in first time: Code: Required-Start: $network Is there any possibilities to order the startup and ask to fstab to start before uTorrent Daemon?
View 4 Replies
View Related
Jan 22, 2010
I am trying to mount cifs through fstab but it is not working. I have an Ubuntu samba server and a Kubuntu client. The share from the server is one dir with subdirs having different permissions and owners/groups. When I do AS ROOT:
Code:
smbmount //192.168.0.254/share /media/maps/share -o username=toshko%pass
the output of the "mount" command is as follows:
Code:
//192.168.0.254/share on /media/maps/share type cifs (rw,mand)
The result is messed up owners with different uids and groups:
[Code]...
View 2 Replies
View Related
Nov 11, 2010
I just went from Jaunty to Maverick. I booted Maverick and manually mounted my Windows Network drives by clicking on the appropriate "mount" command in the directory /media.I then created an fstab file like I did in Jaunty. Here is the smb mount command that I had in the fstab file. I had a file with the user id and password in the credentials file.Code://???.???.??.?public_p/media/servername smbfs credentials=root,dmask=0777,fmask=0777 0 0This provided me access to my server for the past 18 months.I modified the fstab file for Maverick which was working fine for 3 days so I would automatically mount the server drives.
View 1 Replies
View Related
Aug 12, 2010
Hopefully this'll be an easy one (but I wasn't able to find any other posts with the exact same problem).I'm connecting to a large hard drive at work. I can mount perfectly fine. The following is the relevant line in my fstab file:
//XXX.XXX.XXX.XXX/data /mnt/labdata cifs users,rw,exec,suid,dev,username=XXX,password=XXX,_ netdev,fmask=777,dmask=777 0 0
The problem is that when I try to cd to the correct directory, I get a permission denied error. I don't own the mount point, and there aren't general read/write permissions set. But if I change to superuser, I can access it no problem. I can read, write, make directories, etc. So the problem is with my computer--not the remote one.
Now, if I add the option uid=MYID, I can read and write just fine. The system makes me the owner of the directory on mounting. But that's not what I want--I'm trying to allow multiple users access to this file system. I want there to either be a neutral owner (e.g. root) with others having read/write access, or I want the owner of the mount point to be the user currently logged in.
View 5 Replies
View Related
Sep 2, 2009
I remember automounting my windows drive (I dualboot windows and fedora) using /etc/fstab.
Now I can't find what to add to the file in order to mount my drive.
The drive is /dev/sda2 and I would like to mount it at /mount/windows, it's an NTFS drive.
I have been looking around the forums and reading the manuals but can't figure it out
View 3 Replies
View Related
Apr 30, 2010
I have the following line in my fstab:
Code:
//192.168.0.242/websites /mnt/supercube cifs rw,user=XXX,pass=XXX,iocharset=utf8,file_mode=0777,file_mode=0777,dir_mode=0777,uid=XXX 0 0
But it doesn't auto mount with everything and disconnects whenever I suspend my computer. The only way to get it to mount is with
Code: sudo mount -a and it mounts fine with no error.
Did lucid change the way it uses fstab or something? Obviously writing mount -a isn't a huge concern, but it kind of destroys the point of putting it in my fstab.
View 9 Replies
View Related
Apr 27, 2010
I have mounted window shared partition to my RHEL 5.4 server through following command
Quote:
But I'm unable to mount the same via fstab.172.20.x.x is my windows server download is my shared folder name.
Suggest me correct fstab entries
My current fstab entry is as follows
Quote:
View 5 Replies
View Related
Mar 30, 2010
I run ubuntu 9.10, and my wife runs winxp. I am trying to setup an automount of her storage (D) drive in my fstab. here is the line in fstab:
The share mounts with no errors, but when i go into palces and view the share, it is blank, totally empty. I can create and delete documents here, but the next time I open the share, i cant see anything. If i connect to the share using places>connect to server, everything is fine. If i connect using places, network, and browse to her machine, it works just fine.
Today i did a fresh install of karmic, installed smbfs, added the above line to fstab, same issue. I have searced and searched but I haven't found a problem exactly like this. This setup has been working fine until sometime recently. I cant be sure exactly when it stopped working, or why. The reason I need it to automount is I have several applications that point to that drive. It is worth noting i have tried several variations on the line in fstab, all with the same results.
View 5 Replies
View Related
Dec 2, 2009
I've successfully mounted a network share with mount.cifs for the past 2 years using fstab with credfile.
[Code]....
Yesterday I moved this system to a new datacenter, but did not alter fstab or the credfile. The //server/share directory has IP rules in place, but this was updated with the new system IP while we moved the system. Now, I am mysteriously unable to automount //server/share. The local error is 13 (permission denied). The Windows server we are mounting returned a code that is defined as "username is valid but password is incorrect" Again - no changes (content or permissions) were made to my credfile or fstab entry. I've restarted netfs a few times, including rebooting the system twice. What is baffling is I can successfully mount //server/share via command line: Code: mount -t cifs //server/share /mnt/mycooldir -o username=foobar,password=1234
The username and passwords are identical in credfile and the mount options - I copied & pasted username / password from the credfile itself.
View 2 Replies
View Related
Jun 24, 2010
I'm using cifs to mount windows share.I have created one credentials file and given the path in fstab to mount at boot time. Now i want to encrypt the credentials file and place that in the fstab file.But it is not accepting.. how to use encrypted file to use in fstab,so that normal users can not watch the credentials inside the file.
View 3 Replies
View Related
Mar 14, 2011
I have a D-Link DNS-323 network drive which mounts at multiple points to my filesystem when booting. I had to make some fstab changes when I upgraded from 11.2->11.3 last year, and now the same thing seems to be happening since I've upgraded to 11.4. When I login to my profile the desktop hangs and no icons appear. I cannot open a Nautilus window, or access ALT-F2, however just about every other program works fine. Since I disabled the fstab lines (slightly modified when copied here to generalize):
Code:
#//192.168.123.xxx/SHARED-FOLDER1/User-folder /home/user/Documents cifs guest,_netdev,uid=user,gid=users
#//192.168.123.xxx/SHARED-FOLDER2 /home/user/SHARED-FOLDER2 cifs credentials=/home/user/.scripts/.creds,_netdev,uid=user,gid=users 0 0
the desktop icons load and Nautilus works. Can I adjust my fstab syntax to correct this and get my network drives back? I think last year the issue was in referencing the ".creds" file...
View 4 Replies
View Related
Apr 2, 2011
Q: How can I allow my users to mount a cifs share without an entry in fstab in OpenSuse 11.4?
I have an answer myself. Until OpenSuse 11.2 I could mount my samba shares by making mount.cifs and umount.cifs setuid root. Today I installed OpenSuse 11.4. Unfortunately mount.cifs isn't anymore allowed to be setuid due to security concerns. Security is not an issue in my case, so I copied the mount.cifs and umount.cifs from 11.2 to make it work again:
1. Download cifs-mount-3.4.2-1.1.3.1.x86_64.rpm from this repository (I use 64 bit):
"http://download.opensuse.org/distribution/11.2/repo/oss/suse/x86_64/"
2. Extract the files mount.cifs and umount.cifs from the rpm and copy them to /sbin
3. Make them setuid root:
Code:
linux-y5qw:~ # chmod u+s /sbin/mount.cifs
linux-y5qw:~ # chmod u+s /sbin/umount.cifs
4. Mount your cifs shares as a normal user:
Code:
martin@linux-y5qw:~> /sbin/mount.cifs //192.168.2.2/data /home/martin/data/ -ousername=martin
Password:
View 1 Replies
View Related
Jul 11, 2010
Other users can't access my second SATA HDD until I have logged in and clicked on it (or saved or opened a file, etc) and it asks for a password. Once I enter a password then I can access it and so can other users.
I figure I need to auto mount the drive.
I can't seem to view the fstab. In a terminal it says 'permission denied'. I've tried changing to root but get 'Authentication failed'
P.S. I was sure under Kubuntu 7 or 9 you could right click on the icon and select 'automount'. Or was it MEPIS...?
View 6 Replies
View Related
Jan 16, 2011
I have the following two lines at the bottom of my /etc/fstab
Quote:
//172.16.6.15/e /tmp/e cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
//172.16.6.15/e/Public /var/www/index/pub cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
My server address is 172.16.6.1.
If the destination (which is my workstation desktop) 172.16.6.15 is offline when the server tries to boot, the entire boot procedure halts with the following message: Unable to find suitable address. mountall: mount <destination> terminated with status 2 The problem is that my server runs headlessly, and every time something silly like this happens where you'd normally expect the OS to continue regardless, I'm forced to plug a monitor in and diagnose on console
So my question: Is there any way to make it proceed with the boot normally despite the host being unreachable? I could probably chuck a mount command into crontab or /etc/rc.local or a /etc/network/if-up.d script, but isn't this the way it really should be done (/etc/fstab)? If so, then we shouldn't expect the entire boot to halt just because a network share can't be mounted, right? While on the topic of a headless ubuntu server 10.10 not booting without some kind of intervention, I have yet another issue: If the server goes down without proper shutdown (power failure, for example) the grub menu displays the kernel choices and there's no countdown timer. Instead, I have to manually press enter to continue the boot. Is there any way around this? Clearly this should not be the case for a server distribution
View 3 Replies
View Related
Jun 6, 2011
1. 11.4 x64.
2. Solaris SMB server.
3. Gigabit LAN
4. mounted shares from that server (fstab entries)
write speed: 80-90-100 MB/s read speed extremely slow: 3-4-5 MB/s (really funny - our administrator shoked, but i'm not fun, i need fast lan for work)But when i reboot to windows 7 - i have 60-70-80 MB/s in both directions. Read and Write - nice.What happened? kernel updated and all last updates is applied (exclude kopete-because i use old kopete with animated tray icon).I have to tried many tunes like: "noatime" "directio" and also in /etc/modprobe.d - put conf file with: options cifs CIFSMaxBufSize=130048
View 9 Replies
View Related
Aug 23, 2011
I mount the share on my Windows server with following command:
Code:
mount -t cifs -o username=Administrator,password='mypassword',rw,dir_mode=0777,file_mode=0777,nobrl,uid=1000,gid=100 //10.8.0.1/users /mnt/
In my 11.3 computer it works well. I opening, copying files like I do in local filesystem. At the same time it's not working well on my 11.4 computer: the share mounts without errors, I see all files, can copy them from server to local computer. But when I'm trying to make copies to server, sometimes I receive messages like "Error writing file ...". Not always, but in the most part of my attempts. find the part of my /var/log/messages file:
Code:
Aug 23 17:35:55 linux-393i kernel: [ 3522.419904] CIFS VFS: Unexpected SMB signature
I use following kernel: 2.6.37.6-0.7-desktop
View 9 Replies
View Related
May 10, 2010
I'm probably missing something noobishly obvious here. I recently did a fresh Lucid install on my main desktop box, which had previously been running Karmic. With Lucid I can no longer use fstab in my laptops to automatically mount the desktop's shared media drive. Using the mount command works fine. One laptop is running Karmic, the other is running Hardy.This is the line in fstab on both laptops:
Code:
//192.168.0.123/multimedia /media/multimedia cifs username=x,password=y 0 0
This is unchanged since the desktop was running Karmic, where auto-mounting from the lappys worked just
[code]....
View 9 Replies
View Related
Aug 20, 2009
I used command as followings. nothing special. mount -t cifs //192.168.55.53/windows$/Home /mnt/ -o user=username%password It works well after mounted. But mounting itself takes 1-2 minutes terribly. After mounted successfully, file transfer speed looks to be normal.
View 9 Replies
View Related
Dec 30, 2009
I have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies
View Related
Jan 26, 2010
We recently moved to a new home and I am trying to get my home file/print server set up again. Thanks to swerdna's excellent website, I got my server box (just upgraded from 11.0 to 11.2) running Samba and serving my shares over the network, and my "client" machines can access them without a problem.However, I'm not having much luck setting up CIFS mounts on my Linux desktop. I have my all-purpose user added to the Samba auth list (via smbpasswd), and configured my client as swerdna's howto's specify, and I can access the files just find. However, when I try to mount the shares with this command:
Code:
mount -t cifs -o username=klein,password=klein //192.168.1.70/sharedmedia /home/zak/SharedMedia/
I get the following error:
[code].....
View 2 Replies
View Related
Nov 18, 2010
I need to mount a windows share on my OpenSUSE 11.3. I get it using the mount.cifs command (by itself or using cifstab), but only root can rw file. I try the uid/gid parameters (also using forceuid) and the file_mode/dir_mode parameters, but I get the same behavior: all files and directory with rwxr-xr-x permissions and root/root (user/group). I read the whole section FILE AND DIRECTORY OWNERSHIP AND PERMISSIONS in man mount.cifs but nothing works.
View 9 Replies
View Related
Mar 21, 2011
Q: How do I mount a CIFS share so that my user stevej has all rights to it?
Summary: I can mount the share as root.
mount.cifs //10.x.x.x/Data /home/stevej/Synology/Data/ --verbose -o user=stevej
Using Dolphin in Super-User mode, I can copy files and directories from the share to itself with no errors. Using Dolphin in Normal-user mode. I get the failure "Could not change permissions for...". The file is copied, but its owner,timestamp and permissions are wrong. If a subdirectory is involved, the copy aborts.
Using Windows XP I can copy files and directories from the share to itself with no errors.
Testing: If I mount with uid and gid, then my normal user can not access the share.
mount.cifs //10.x.x.x/Data /home/stevej/Synology/Data/ --verbose -o user=stevej uid=stevej gid=users
[code]...
Synology DS211 - There are 2 users on it. One of which is stevej and the other is julie. Rights RWX are applied to the users and the group called users. All files have stevej as the owner and users as the group with RWX Opensuse 11.4 - There are 2 pc's. One is run as stevej. The other pc runs as julie Windows 2000 - Runs as stevej and maps to the share as stevej.
Works as expected Windows XP - Runs as julie and maps the the share as julie. Works as expected Ultimately, I want the shares to automount at boot, or login and give the user full access. I have been to Swerdna's page and done as much as I can, but still no luck.
View 4 Replies
View Related
Jul 26, 2011
I'd like to have a CIFS drive mountable for various users. Each user uses different credentials and I want the drives to be automounted without using sudo-rights. I imagine the best thing to do would be to have the fstab entry point to multiple credentials files. Is there a way of doing that?
View 2 Replies
View Related
Jan 3, 2010
Am in the process of upgrading from an ancient OpenSuSE release (7.2) to 11.2. One thing I have been unable to do that worked fine under 7.2 is remotely mounting a compact flash drive from an XP machine. Worked fine for many moons on 7.2:
# mount -t cifs -o rw //xpbox/'cf (H)' /cf0
I get:
mount error(12): Cannot allocate memory
Other cifs mounts of hard disks work fine.
I found a posting that says this means the memory allocation error is from the XP side. It says to fiddle with the XP registry, specifically IRPStackSize. I was not confident this fix would work since there should not be anything significantly more consuming with 11.2 compared to 7.2, and indeed, I got the same error after changing the parameter to 18 and rebooting the XP machine. Any ideas? I have some suspicion that the space and parenthesis in the share name might be fouling up someone. XP forces the share name to this for some reason.
View 1 Replies
View Related
