OpenSUSE Install :: Use Vodafone Datacard On Suse 11.1?
Feb 7, 2010how to use vodafone datacard on suse 11.1?
View 4 Replies
ADVERTISEMENT
OpenSUSE Network :: Internet Datacard Gets Disconnected After Sometime?
May 21, 2011If i leave my laptop idle for sometime, my usb datacard connection gets disconnected. I know its a dial-up connection and if no application is accessing internet it disconnects on its own. The problem over here is when i click on the icon and click on activate it won't happen. So, i have to unplug the hardware and then re-insert it to make it work again.I went through a site, there they have mentioned a work around that is to keep a ping command always running. I'm fine with that, but why do we need to remove the hardware n re-insert it to make it connect to the internet again
View 3 Replies View RelatedOpenSUSE Network :: Vodafone - Connected But No Internet?
Aug 17, 2010I'm using SuSE 11.3. I have installed this betavine stuff with which I can use my Vodafone mobile connect usb device. (vodafone-mobile-connect-2.10.01-1.noarch.rpm + dependencies.) I was able to get it to run, it can connect, I can even send text messages (SMS) with it.
However, if I try to use the internet, the system behaves as it wasn't connected to it at all. ping doesn't see anything, neither does firefox etc. I have turned off all proxy and firewall settings.
I suppose I should tell Linux to use this connection for the internet, but how? Do I have to configure something with NetworkManager?
OpenSUSE Install :: Can`t Install Suse 11.3 - Every Time System Shut Down In Install Process
Jan 30, 2011I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
OpenSUSE Wireless :: Connection With Vodafone Mobile Broadband Modem (ZTE) K3570-Z?
Feb 22, 2011I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies View RelatedUbuntu Networking :: Vodafone Installation Software For Mobile Broadband - Will Not Install?
Oct 3, 2010I have a Vodafone mobile broadband dongle for the United Kingdom. The installation software is for Windows and Macs only. In Windows it works fine. If I plug the dongle in the USB in Ubuntu then it is recognised but the installation does not start (quite understandably). So I tried using wine with the Windows executable. It starts off promisingly, then hangs. Some files are created along with desktop icons but the installation does not complete.
I have seen here (http://ubuntuforums.org/showthread.p...light=vodafone) the comment that Vodafone installation can be tricky. So, can any kind person tell me if it is possible to get Vodafone dongles working under 10.04? Also, are there any other UK broadband pay-as-you-go dongles that will work? I have seen in a very recent post that "3" seems to be plug-and-play?
OpenSUSE Install :: Open Suse 11.3 Along With Win 2008 R2 OS - Error "Win2008 R2 Is Not Supported In Open Suse Installer"
Mar 6, 2011I am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedOpenSUSE Network :: Error - Vodafone Mobile Connect Needs The Following Files And Dirs With Some Specific
Sep 17, 2010I have installed the files from Betavine - SuSE Linux Drivers and installed it by clicking the rpms and installing now the error is this- Vodafone Mobile Connect needs the following files and dirs with some specific permissions in order to work properly: /etc/ppp/chap-secrets should have 0660 mode, found 0666 /etc/ppp/peers should be readable and writtable by group root user Rob should be a member of group root
View 3 Replies View RelatedSUSE / Novell :: Install OpenSuse 11 64bits On A Box Already Has 32bits OpenSuse Installed?
Nov 23, 2010I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View RelatedOpenSUSE Install :: Install Suse Alongside An Existing Install?
Apr 18, 2010i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
OpenSUSE Install :: Suse Install Formatted User Data
Sep 11, 2010I have installed Suse on my Windows Vista 64bit machine a couple of times, but the last time I did it - after a disk change - presented some unanticipated problems. Prior to install, Windows Disk Management (whose output I was unable to paste into this question) showed that my disks were laid out as follows:
[Code].....
Disk 0 is a Seagate ATA drive, while Disk 1 is a Western Digital Ext HDD Usb Device. Looking back, I think I should have carved out a partition after M before installing Suse, but I was uncertain whether to make it a logical one or a primary, and in the past the installation has taken the 25 or so gig it needed from the last defined partition on disk 0. This time, however, it went after disk 1, and reformatted the entire drive, deleting about 300 gig of user data, including my system backup. What really suprised me is that it took up the entire drive: 2 gig for the swapfile, then a 20 gig partition, and all the rest for the third partition.
This is not what I would have expected. I especially would not have expected the installation to re-format user data. In any case, I did not want Suse on disk 1, so I reformatted the drive and then used my Partition Manager to rebuild the boot Mbr. So now, I am able to boot into windows, do not have Suse on my machine, but have lost critical data. My disks are now back to the way they were when I started (see above), except that drive F is now all free space, except for my latest backup. My question is how do I ensure, when I reinstall Suse, that it will choose disk0 for the installation and will not overlay any of the data that I have on that drive.
OpenSUSE Install :: How To Re-install Suse On A Dual Boot System
Oct 22, 2010Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View RelatedOpenSUSE Install :: Install Suse On My PC - Boot From CD-rom Does Not Work
May 23, 2010I have just downloaded a mirror copy of SUse 11.2 and formatted my hard drive, so i can install the linux OP. But it seems like that it is not readable or better to say the boot from CD-rom does not work! Am i on the right track here? How do i go by installing a Linux on a fresh hard drive?
View 2 Replies View RelatedOpenSUSE Install :: Cannot Install Suse - Does Not Recognize My CD/DVD Device
Jul 13, 2010I built a new pc and want to have Suse again. Unfortunately Suse installation does not recognize my CD/DVD device. So I boot from DVD select installation and a few moments later there's a popup 'make sure cd number 1 is in your drive'. I also did try to load other kernel modules but nothing helps. The only drive which is always recognized is floppy drive.
Here are some details about my system: Asrock P55M Pro board, Intel P55 chipset, 2 SATA HDD's, IDE NEC 2510 DVD writer, BIOS is set to AHCI due to Windows.
I tried following:
Use Suse DVD 11.0, 11.2, x86 or x64
Set BIOS to AHCI, IDE (compatible), IDE (enhanced)
DVD writer NEC was used in my former pc and did install 11.0 without probs.
Installing from HDD is new to 11.2 thus I copied the DVD to a directory. During Installation I can select the correct partition but suse is not able to find repositories.(?)
OpenSUSE Install :: Install Suse 11 - Without Distrubing Windows 7
Oct 23, 2010I have installed windows 7 in my laptop. i have only c drive with a memory space of 284mb. now i like to install suse 11 in c drive itself without distrubing windows 7. after installing i should be able to go for either windows 7 or suse 11 easily. i must have the both. I had partitioned windows 7 in fat. i had not use ntfs.
View 1 Replies View RelatedOpenSUSE Install :: SUSE 11.4 ISO Disk Install Fails
Mar 23, 2011Have burned a DVD of 11.4 64bit and am trying to install alongside Windows 7. The boot from the disk starts, I get a SUSE splash screen and initial menu. I check install source (F4) is set to CDROM. When I then select "install" the kernel loads, but then it goes wrong. Whatever I do I get "No repository found". It's almost as though, having loaded the kernel from the DVD, the installer can no longer see the disk.
View 9 Replies View RelatedOpenSUSE Install :: Suse 11.4 Install App Crash Error ?
Mar 28, 2011I am trying to install a Java based game to try it out and i keep getting a crash report can anyone assist me with getting this to work?
Code: Unexpected crash while launching login The error was: <null>
It's possible you might figure out what's wrong from the log file below.
Contents of temporary launch log:
Time is Mon Mar 28 06:40:58 EDT 2011
Running client version 2.7.5g
System information:
Executing from /home/jerry/Documents
Operating system: Linux (arch: amd64, version: 2.6.37.1-1.2-desktop)
Java version: 1.6.0_20 (Sun Microsystems Inc.) <http://java.sun.com/>
Jvm version: 19.0-b09 (Sun Microsystems Inc.) [OpenJDK 64-Bit Server VM]
Available CPUs: 2
Main thread exiting.
CLIENT CRASH
OpenSUSE Install :: Update From Suse 11.0 To 11.1?
Jan 10, 2009I have suse 11.0 installed and now that 11.1 is out i would like to update. I have searched for this already and have found three ways of doing it:
zypper dup
zypper up
in YAST view all packages and right click and click update all if update available.
I have tried all these methods but i still seem to be running Suse 11.0 as it says in sysinfo:/ . How do i successfully update from 11.0 to 11.1?
OpenSUSE Install :: Suse 10.2 Want To Update To 11.2?
Jun 13, 2010I tried to download the Suse 11.2 DVD to do an install. When I went to do the install it failed cause it was corrupt.Not to big of deal, I had an older version of 10.2.Now that I have 10.2 installed, is there a way for me to upgrade this to 11.2 without downloading the Install DVD.I've been away from messing with Linux for a few months so I'm pretty darn rusty. I'll run Linux for awhile and when I get frustrated I'll move back to Windows. I'll mess with that for a few months and then go back to Linux...
View 6 Replies View RelatedOpenSUSE Install :: Cannot Use SuSe And Cannot Remove It
Sep 11, 2010I have installed 11.3 and really hashed it. I am getting no where and cannot find my way around. I tried to install as a partition with Ubuntu and Windows 7. Result. I have lost Both Ubuntu and windows with SUSE 11.3 installed and with YAST2 (as superuser) I cannot install belkin to get an internet connection, cannot instal Ubuntu or any thing else. I get the following;
[/media/Ubuntu 9.10 i386/wubi.exe] End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the centraldirectory and zipfile cannot be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of the /media/Ubuntu 9.10 i386/wubi.exe or /media/Ubuntu 9.10 i386/wubi.exe.zip, and cannot find /media/Ubuntu 9.10 i386/wubi.exe.ZIP, period
I think I have not only installed this incorrectly but I have something I don't fully understand.
I would like to reinstall Ubuntu and then if I cannot get on with SUSE
OpenSUSE Install :: Suse 10.1 Setting Up PDC?
Dec 17, 2010I am setting up a PDC using suse 10.1 but I get the error(failed to modify entry:
structural object class modification from 'sambaDomain' to 'inetOrgPerson' not allowed at /usr/sbin/smbldap-populate line 464, <GEN1> line 21.) when I run /usr/sbin/smbldap-populate command
linux-5r4o:~ # /usr/sbin/smbldap-populate
[code]....
OpenSUSE Install :: Suse Over Win Xp Partition
Feb 14, 2011I had dual boot win 7 and win xp, when i tried to install suse over win xp partition (i choose to format that partition during installation suse). I dont know how but suse keept win xp, and make 4 new partitions. After that i had to format whole hd, couse with partition magic i could not find that 4 partition. Now i install win 7 and win xp again, but i want to install suse instade of xp. Is there option to install suse. So i would have l 3 Os, i have laptop. Are 3os slowing comp.?
View 9 Replies View RelatedOpenSUSE Install :: How To Upgrade Suse 11.3 To 11.4
Mar 5, 2011is it possible to upgrade simply upgrade from 11.3 to 11.4 or do i have to do a clean install? what are the procedures on linux??
View 9 Replies View RelatedSUSE :: How To Install FTAM On Opensuse
Apr 1, 2010how to install FTAM on opensuse ?.Where i can download the software and how to install it..
View 2 Replies View RelatedSUSE :: Cannot Install Tls On Amsn In Opensuse 10 ?
Jul 30, 2010I can't install tls in amsn !
View 1 Replies View RelatedSUSE :: Netbook Won't Install OpenSUSE 11.3
Sep 3, 2010I have a Samsung NC-10, installed Win 7 on it and after about 3 months realised that the Intel Atom processor couldn't cope very well. I defected to linux but I can't get the damn thing to boot. I downloaded the iso of openSUSE 11.3 and opened it with Daemon Tools Lite. In my first attempt, I copied and pasted the image using windows explorer onto an 8GB flash drive. I got a "Disk Error" message. (I did change the boot order so that the USB HDD had priority). I got my dad in to help and he formatted the drive to FAT32 and used xcopy in CMD to put the iso image onto the disk. Then I got the "Remove disks or other media. Press any key to restart" message. I'm annoyed now because I have spent my evenings doing this for the best part of 4 days.
View 8 Replies View RelatedOpenSUSE Install :: Suse 11.2 Net Install Error
Feb 26, 2010I'm trying to do a new net install on my laptop. I can boot into the installation kernel and I enter the http server: (download.opensuse.org) and the folder: /distribution/11.2/repo/oss. The installation proceeds to "System Analysis" and continues 90% of the way to "Build Repository" At this point, I am greeted with a red dialogue box which says: An error occurred during the installation.
View 5 Replies View RelatedOpenSUSE Install :: How To Install Suse 11.2 On Macbook
Apr 22, 2010I have a Macbook && two questions MacBook Model==>MC207LL/A Here how to install suse 11.2 on my mac?(I have Windows 7 too.) are there any driver for this Model?
View 4 Replies View RelatedOpenSUSE Install :: How To Install Wine In SUSE
May 4, 2011Im new in using SUSE. Step By Step installation of wine.) im kinda confuse of the process. tnx
View 9 Replies View RelatedOpenSUSE Install :: Can't Login To Windows Xp After Suse 11.1
Apr 19, 2009I can't seem to boot to windows xp after installation and then update from the openSUSE 11.1 live cd. This is my /boot/grub/menu.lst
Code:
# Modified by YaST2. Last modification on Sun Apr 19 19:35:24 WEST 2009
default 0
timeout 8
##YaST - generic_mbr
[code]...
/dev/sda1 boots fine to the system restore from Acer. when selecting Windows option on boot menu it simply flickers and returns to the menu. /dev/sda3 is non bootable, symply filesystem. When using boot loader settings from YasT I go to other and press "Propose new configuration" it changes the menu but when pressing OK it asks for a floppy disk and doesn't save the configuration (so on new boot I return to the same).