General :: Speed Up Network In Ubuntu?
Oct 17, 2010I find the rate of downloading package files from main repository is very slow in my computer(ubuntu OS).What can i do to speed up it?
View 1 Replies
ADVERTISEMENT
General :: Network Speed Is Abysmally Slow While WinXP Is Ok?
Sep 18, 2010I have a Dell inspiron 640m (1405). I am a reasonably clued in linux user, but I am getting serious networking speed problems. The networking card is an intel 3945ABG When wirelessly connecting with windows XP, everything runs fine and the network connection is fast.
When connecting with any linux distro, the networking speed is abysmally slow, and the connection drops randomly. (the network is recognised and the connection is made however)
General :: Making Server Completely Transparent To Speed Up Network
Apr 8, 2010I am just checking in I know a lil about linux looking to learn more I know forums are the best way to go. I recently installed centos 5.3 on a machine we are going to be using as a squid server. Just a couple quick ?s and just wanted to pick your alls brains. What I am trying to do with the server is use it for caching to speed up our network t but I don't want to go around to all the our customers to setup their browser for proxy. What all is involved with making this server completely transparent. So the end user will does not need to enter in proxy information.
View 3 Replies View RelatedOpenSUSE Network :: Any Good Tweaks To Speed Up Network
Apr 12, 2011Can anyone suggest any good tweaks to speed up network please?
View 3 Replies View RelatedOpenSUSE Network :: Method Of Selecting Network Speed On Set Up?
May 27, 2011Is there any method of selecting a network speed on my set up? It is capable of running at 100mb/sec but have the feeling that it isn't. Plug in vista on a lap top and no problems at all. It's also noticeably quicker. I assume that a straight install does set up bi directional and 100mb/sec?
View 5 Replies View RelatedOpenSUSE Network :: FTP Network Speed Using 11.4 Falls Down To 15 MiB/s After 30 Seconds At 90 MiB/s
Jun 8, 2011I'm facing an odd problem with a fresh install of OpenSuse 11.4 on a Dell PE-2950, using NIC Broadcom BCM5708C (rev 12) NetXtream II. Driver's are up to date. I'd installed vsftpd and configure it. I can connect from anywhere in the network where I setup this Server. The odd problem is that when I'm sending a big file (5.5 GiB for example), from another PE-2950 server (Windows Server 2003 64 bits R2) with another BCM5708C nic, the speed of the transfer starts at 90 MiB/s approx. but after 30 seconds , it drops to 15 MiB/s and never raise again. Driver's are up to date too.
However, from another Server in the network, a Dell R710 with SLES 10 SP3, the transfer speed is at 90-100-110 MiB/s all the time. The switch is a HP Procurve 2910al-24G, with all ports at gigabit speed. I'd tried with different FTP clients in Windows: WinSCP and the Windows's ftp client, but the result is the same: speed falls down after 30 seconds approx. using the Windows-Box.
Ubuntu Networking :: Network Transfer Speed Only 11.3Mb/s
Jun 19, 2011I just noticed that files are transferring between my two computers at no more than 11.3Mb/s no matter what I do.
I regularly use sshfs to mount a drive on my main computer. But after noticing a dismal speed of 10Mb/s when copying a file, I thought maybe sshfs is slow. So I tried scp, and I'm getting 11.3Mb/s with scp. Using the blowfish cypher gave me no change to this, still exactly 11.3Mb/s.
I have a Gigabit network except for the cable, which is a 10meter, 100Mb/s cable.
I have a custom modified sysctl.conf file which I'll post here if needed.
Is there anything I can do about this pathetic speed ? Maybe a modification to my ssh config ? sysctl ? anything ?
General :: Turn Turtle-speed Browsing Into Penguin-speed Browsing?
Oct 17, 2010I've just installed Slackware 13.1 in two different laptops for first time. I have some strange internet browsing behaviour in one of the laptops. I've installed 2 internet browsers(firefox,opera) using the directions from Slackbuilds.org and there is also konqueror pre-installed. Moreover I installed Wicd network manager.
I can browse some pages e.g. ..... with firefox very slowly but NEVER facebook. I can browse almost any page, even facebook, with OPERA but very very slowly. The same goes with konqueror... Wicd shows that i am always connected with my WPA wireless network
Laptop details:
Quote:
Toshiba sattellite a100-209
//-----------------------------------------------
Processor Intel Celeron M 370 / 1.5 GHz
Databus-Speed 400 MHz
//-----------------------------------------------
Installed RAM 512 MB
Technology DDR2 SDRAM - 533 MHz
[code]....
Ubuntu :: Slow Network Speed When Writing To Server?
Jan 13, 2010I have just formated and did a fresh install to start all over. I installed Ubuntu 9.1 and everything went fine but the network. The computer serve as a NAS and MediaPlayer. When getting a file from the server, I get a speed of 40-60mb/sec, which are good for a Gigabit network. When I try to put a file in, the speed can't pass more than 1mb/sec and often stop.
Here's the network info:
Code:
vric@XBMC:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:8c:a1:eb:55
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fea1:eb55/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
Edit: Looks like it's a Gigabit Problem. I connected the Ubuntu box to my Linksys router which is 10/100 and everything is MUCH faster.
Ubuntu Networking :: Measure Network Speed Between Two Servers
Jan 18, 2010Any command line tool to measure the network speed between my two linux servers without taking disk speed into account? My network is supposed to be 100Mb, but it doesn't feel like that so I wonder where the bottleneck is. The numbers that I see doesn't correlate well to that. So I'd like to know the speed network card to network card.
View 2 Replies View RelatedUbuntu Servers :: Can't Get Near Theoretical Network Maximum Speed
Mar 10, 2010With three 1.5TB, 7200RPM drives in RAID0, they thrash. And yet the network out, 4 gigabit ports LAG'd together to create a single 4 gigabit connection, can't even push a single gigabit a second.
Here's what I've done so far:
I've enabled jumbo frames on the bond: ifconfig bond0 mtu 9000
Tweaked SAMBA performance:
Tweaked hdparm:
I haven't enabled jumbo frames on the switch but I'm almost sure that won't help me much after trying all this.
I'm running out of ideas here guys. The clients connected are pulling down images in both Ghost and WIM (ImageX) format. Large files too, upwards of 12 gigabytes.
Ubuntu Networking :: View Network Connection Speed?
Nov 12, 2010how to view my network connection speed. EG: 10/100/100 mbit. I searched and searched with no luck, I tried ethtool as well as mii-tool.
View 4 Replies View RelatedUbuntu :: Monitor The Network Upload And Download Speed
Feb 7, 2011When I'm using Ubuntu, I like to use the "system monitor" - specifically to monitor the network upload and download speed.
View 1 Replies View RelatedCentOS 5 :: How To Limit Network Speed
May 3, 2011How to limit network speed? Is there any apps in Centos can do that?
View 1 Replies View RelatedUbuntu Networking :: Slow Copy Speed To Network Volume
May 4, 2011In mi fstab file I mount a smb file server at boot. The code is:
//<ip address>/data /home/eng-2/NAS smbfs credentials=/home/eng-2/.smbcredentials,dir_mode=0775,gid=1000,uid=1000 0 0
Transfer rate to the server is approx 100 KB/s
Whilst transfer rate from the server 16 MB/s
If I mount it from Places>connect to server. Both to and from speeds are 16 MB/s. Why is it so slow when mounted through fstab?
Ubuntu :: Possible To Speed Limit Specific System Not Entire Network?
May 9, 2011I have this new flatmate who uses all my Internet data up before the end of my monthly clockover. Instead of having to buy heaps of data top-ups at the end of the month, is there a way I can limit the speed of his computer through the network? I have tried looking through my router settings (which is a Thomson router) but there doesn't seem to be any options in regards to limiting activity of a system on the network.
View 3 Replies View RelatedOpenSUSE Network :: Bad Download Speed In 11.2 When Compared To 10.3
Mar 31, 2010I was a user of openSUSE 10.3. I used to get a decent speed in BitTorrent (using KTorrent 2.2.1) there, since I had earlier used Windows and the speed wasn't as good, even in Windows 7. Recently, I installed openSUSE 11.2 and found that I wasn't getting the good speeds in KTorrent. The overall performance was a fraction of what I used to get in the older Linux installation.
I decided to verify whether my suspicions were justified by again reinstalling openSUSE 10.3. When I did this, I was again able to get the great performance I used to get always with openSUSE 10.3 running KTorrent 2.2.1 I don't know what causes this, but I know that this sad thing really has happened. A newer version is actually not worth it! I hope my voice reaches the openSUSE developers and such bad incidences don't occur anymore.
Networking :: Way To Limit Download Speed On A Network
May 10, 2011I have a linux debian on a network connected to a router through a ethernet cord. My linux is hogging the network speed and the users of the other computers on the network aren't very happy. Is there a way to limit the download speed on only my computer?
View 1 Replies View RelatedServer :: IPtables And TC To Limit Network Speed
May 14, 2010I am trying to limit bandwidth of certain ip addresses on my server. I have been doing hours of reading and not getting very far... So far I believe the iptables command is
ptables -A PREROUTING -s 178.33.23.44 -t mangle -j MARK --set-mark 2
ptables -A PREROUTING -s 178.33.23.45 -t mangle -j MARK --set-mark 2
ptables -A PREROUTING -s 178.33.23.46 -t mangle -j MARK --set-mark 2
ptables -A PREROUTING -s 178.33.23.47 -t mangle -j MARK --set-mark 2
and now I just need the tc command to read those marks and limit bandwidth, I have a gigabit connection and would like to limit each of these ip addresses to 10mbit in and out.
Ubuntu Networking :: Slow Network Speed / High Packet Loss
Apr 22, 2010I have problems with my network speed when i ping my proxy server I end up getting a high packet loss generally more than 30%.I have tried to use various network monitoring softwares like etherape, wireshark, tcpdump but I am not able to get to the bottom of the problem.basically I am trying to find out where the lost packets are going.
View 7 Replies View RelatedUbuntu Networking :: 10.04 Lucid Lynx Network WiFi Slow Speed
May 18, 2010A lot of people have the problem to find themselves with Lucid Lynx 10.04 and experience massive issues when connecting to wireless - me too. As a service, here some relevant links which promise relief:
[code]...
I tried all of them, and none reliably worked. Every solution which required re-association wtih the AP helped for some time, but nothing helped for long. First, don't let yourself fool by the disable IPv6 trap - while it is "enabled" it is acutally not used by Lucid! I have a clean install of Kubuntu 10.04 on an AMD64 Laptop with Broadcom STA driver: 03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03) However I can reliably stabilize my connection for some time either by manually disabling WiFi with the hardware switch or disabling WiFi by software means and re-activating. This brings speed at par with Kubuntu 9.10 until some time. Can anybody confirm this behaviour?
Fedora Networking :: Network Speed Depends On Installation?
Jul 27, 2011probably this is the most idiotic question and probably i know the answer. But I want to get confirmed. Is it anyway possible that my mobile broadband speed is slow because of my installation is wrong? actually, I formatted my machine and make it dual-boot. After that my mobile-broadband speed is horrible slow. I installed (a)kmod-wl and as dependency, broadcom-wl but my lspci only shows intel network manager.
Code:
$ lspci|grep Network
17:03:00.0 Network controller: Intel Corporation Device 008a (rev 34)
can this be related or just coincidence?
Networking :: Installed Dnsmasq To Speed Up Dns Querry For My Network
Dec 20, 2010I installed dnsmasq to speed up dns querry for my network. i didn't really change any thing in my dnsmasq.conf file. i only just put my upstream dns addresses in resolv.conf. i have dchp running and configured to issue the ip address of the system running dnsmasq as dns ip to the dhcp clients. But i have noticed that if i do ipconfig /all on my windows clients, instead of the dnsmasq server ip showing, i still see the dns ip of my upstream provider. by this, iam assuming that the client are not using the cache even though the service is running on the server.
View 6 Replies View RelatedNetworking :: Network Transfer Speed Over Time Mathematical
Jan 26, 2010I was wondering how to calculate some problems related to network transfer speed. If someone can show me a function to calculate network transfer speed over time, I would appreciate it.I'm in the midst of transferring 1.3TB of data to a network storage system. By looking at the stats, 4.6GB file transferred out in 6 min and 30 seconds. How long would it take to transfer 1.3TB of data?
View 3 Replies View RelatedUbuntu Networking :: Wired Network Connection Lowers Link Speed Repeatedly
Apr 1, 2011I believe I'm running Kubuntu 10.04, but don't quote me on that. Here's the version string from dmesg. Linux version 2.6.32-31-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #60-Ubuntu SMP Thu Mar 17 22:15:39 UTC 2011 (Ubuntu 2.6.32-31.60-generic 2.6.32.32+drm33.14 I have an emergent problem with my wired ethernet resetting the connection on a frequent basis. When it resets it re-negotiates the link speed and I often end up with a 10Mb/s link and on some occasions a 100Mb/s. The configured speed for the link is 1000Mb/s full duplex using a preup ethtool command. I do not use NetworkManager but have the interface configured in /etc/network/interfaces.
[code]....
OpenSUSE Network :: Transfer Speed Between Samba Server And Win Clients
Mar 12, 2010I have the problems with transfer speed between samba and Windows XP clients.
Samba server configuration:
Quad Core 6600 CPU.
4 Gb RAM
OpenSUSE 11.2 with kernel "2.6.31.12-0.1-desktop"
Samba - samba-3.5.1-1.1.i586
Test: 4 GB File copying. One file.
Transfer speed from Samba Server to Windows 7 and XP clients:
(Windows clients copy file from Server share -> to local drive)
From Server to Windows 7 client 1:
85-90 Mb/sec
From Server to Windows 7 client 2:
90-100 Mb/sec
From Server to XP1 client 3
75-100 Mb/sec
Transfer speed from Windows 7 and XP clients TO Samba Server:
(client copy file from local drive -> to server Share)
From Server to Windows 7 client 1:
12-20 Mb/sec
From Server to Windows 7 client 2:
30-35 Mb/sec
From Server to Windows XP client 1
20-27 Mb/sec
(Copying file from Windows local drive to Windows remote share)
From Window 7 client 1 TO Windows XP client 1
40-50 Mb/sec
From Window 7 client 2 TO Windows XP client 1
50-60 Mb/sec
Copying file from Windows 7 client 2 share -> TO Windows XP client 1 show me 100-120 Mb/sec speed permanent.
Copying file from Linux hosts to NFS server is stable 50-90
Mb/sec bidirectional.
This part of my smb.conf file
Code:
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2009-10-27
[global]
log level = 1
debug level = 0
max log size = 50 .....
I have very slow write speed when copying file from Windows clients to Samba Share. Samba speed is slower than Windows native clients connections ?
Ubuntu Multimedia :: Trying To Playback At Double Speed - VLC Will Play The Video At Normal Speed But With No Audio
Jul 23, 2011Ubuntu 64bit. The sound system works and plays noises correctly when I test the speakers in sound preferances. The internet BBCi player(Radio) plays sound correctly. Banshee & Rhythmbox try to play music files at double, or more, speed with no sound output. Spotify Linux version also tries to playback at double speed with no sound output. Media Player attempts to play music files at high speed. Media player plays the Video and audio tracks at high speed. VLC Will play the video at normal speed but with no audio.
View 1 Replies View RelatedDebian Hardware :: Slow Outgoing Network Speed With RTL8111 / 8168B
Sep 18, 2014I'm experiencing very slow network speeds in one direction (out) on a clean install of debian.
iperf client running on laptop connecting to server with issue:
Code: Select all$ iperf -c 192.168.10.187 -d
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 128 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.10.187, TCP port 5001
TCP window size: 129 KByte (default)
------------------------------------------------------------
[ 5] local 192.168.10.131 port 55340 connected with 192.168.10.187 port 5001
[ 6] local 192.168.10.131 port 5001 connected with 192.168.10.187 port 52664
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 247 MBytes 207 Mbits/sec
[ 6] 0.0-11.5 sec 1.00 MBytes 730 Kbits/sec
I've tried with different cables on the server, no luck. Also note that the laptop gets full speed to speedtest.net as per my internet subscription (75/75 gbit fiber), so the laptop can be ruled out as a problem since it gets more than 75X performance to the internet compared to the local server.
The main purpose of this server is to be a virtualbox host. I've set up one guest system and ran iperf between the host/guest (bridged network). It gives better numbers, still the host -> guest direction is much slower than it should be:
Code: Select allClient connecting to 192.168.10.187, TCP port 5001
TCP window size: 108 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.10.163 port 48573 connected with 192.168.10.187 port 5001
[ 5] local 192.168.10.163 port 5001 connected with 192.168.10.187 port 48856
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.65 GBytes 1.42 Gbits/sec
[CODE]..
Fedora Networking :: Unknown Network Activity Kills Internet Speed
Jul 13, 2009I upgraded from Fedora 10 to Fedora 11 last night in response to a pop up window. When I rebooted after the upgrade my wife immediately complained about the internet not working. Actually the connection up was working but Fedora 11 upgrade had made it slow almost to a stop There are two XP machines the network behind a local D-Link wireless router with Comcast high speed internet. When I disable networking on the Fedora machine the internet connection immediately returns to normal on the other two machines. Also there is a second or two period after enabling networking for a quick upload or download before the connection clogs.I checked the system monitor network history and found that there is a constant networking send rate of just under 180 kb/s in the background.This occurs even when the browser, email client, and automatic backup are off and the only process showing significant CPU use in the system monitor is the monitor itself.
I tried netstat but there were so many /tmp/orbit entries that I could not scroll up to the top of the listing. Is this normal. If so, does anyone know the netstat command options to just see connections with sent packets. I also tried ifconfig -a. This shows no Rx packets at all, and no TX packets except on eth0, The total etho TX packets matches t,he reported by the system monitor, and in the monitor you can watch the total accumulate in approx 180 kb/sec increments. I don't understand why 180kb/sec TX would make a dramatic difference in internet network internet speed. Comcast reports upload speeds in megabytes. I need to be able to use the net in Federa, but I am also curious to learn what is the caused the problem.
Ubuntu :: Cd Burner Goes To 16 Speed Burning And Up: Cannot Burn At 4 Speed
Dec 20, 2010i both have the same problem, i'm trying to burn my images at 4 or 8 speed, but ubuntu 10.04 says that the hardware does not support that kind of speed and switch up to 16 speed and more. i know it can burn at low speeds, at least in windows, it is a bit strange that fast burning is okee, and slow not, what can i do to prevent this? i don't wanna burn to much errors on my discs
View 5 Replies View Related