General :: Network Speed Is Abysmally Slow While WinXP Is Ok?
Sep 18, 2010
I have a Dell inspiron 640m (1405). I am a reasonably clued in linux user, but I am getting serious networking speed problems. The networking card is an intel 3945ABG When wirelessly connecting with windows XP, everything runs fine and the network connection is fast.
When connecting with any linux distro, the networking speed is abysmally slow, and the connection drops randomly. (the network is recognised and the connection is made however)
View 2 Replies
ADVERTISEMENT
Jan 13, 2010
I have just formated and did a fresh install to start all over. I installed Ubuntu 9.1 and everything went fine but the network. The computer serve as a NAS and MediaPlayer. When getting a file from the server, I get a speed of 40-60mb/sec, which are good for a Gigabit network. When I try to put a file in, the speed can't pass more than 1mb/sec and often stop.
Here's the network info:
Code:
vric@XBMC:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:24:8c:a1:eb:55
inet addr:192.168.1.5 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:8cff:fea1:eb55/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]...
Edit: Looks like it's a Gigabit Problem. I connected the Ubuntu box to my Linksys router which is 10/100 and everything is MUCH faster.
View 2 Replies
View Related
May 4, 2011
In mi fstab file I mount a smb file server at boot. The code is:
//<ip address>/data /home/eng-2/NAS smbfs credentials=/home/eng-2/.smbcredentials,dir_mode=0775,gid=1000,uid=1000 0 0
Transfer rate to the server is approx 100 KB/s
Whilst transfer rate from the server 16 MB/s
If I mount it from Places>connect to server. Both to and from speeds are 16 MB/s. Why is it so slow when mounted through fstab?
View 2 Replies
View Related
Sep 18, 2014
I'm experiencing very slow network speeds in one direction (out) on a clean install of debian.
iperf client running on laptop connecting to server with issue:
Code: Select all$ iperf -c 192.168.10.187 -d
------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 128 KByte (default)
------------------------------------------------------------
------------------------------------------------------------
Client connecting to 192.168.10.187, TCP port 5001
TCP window size: 129 KByte (default)
------------------------------------------------------------
[ 5] local 192.168.10.131 port 55340 connected with 192.168.10.187 port 5001
[ 6] local 192.168.10.131 port 5001 connected with 192.168.10.187 port 52664
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-10.0 sec 247 MBytes 207 Mbits/sec
[ 6] 0.0-11.5 sec 1.00 MBytes 730 Kbits/sec
I've tried with different cables on the server, no luck. Also note that the laptop gets full speed to speedtest.net as per my internet subscription (75/75 gbit fiber), so the laptop can be ruled out as a problem since it gets more than 75X performance to the internet compared to the local server.
The main purpose of this server is to be a virtualbox host. I've set up one guest system and ran iperf between the host/guest (bridged network). It gives better numbers, still the host -> guest direction is much slower than it should be:
Code: Select allClient connecting to 192.168.10.187, TCP port 5001
TCP window size: 108 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.10.163 port 48573 connected with 192.168.10.187 port 5001
[ 5] local 192.168.10.163 port 5001 connected with 192.168.10.187 port 48856
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.65 GBytes 1.42 Gbits/sec
[CODE]..
View 4 Replies
View Related
Apr 22, 2010
I have problems with my network speed when i ping my proxy server I end up getting a high packet loss generally more than 30%.I have tried to use various network monitoring softwares like etherape, wireshark, tcpdump but I am not able to get to the bottom of the problem.basically I am trying to find out where the lost packets are going.
View 7 Replies
View Related
May 18, 2010
A lot of people have the problem to find themselves with Lucid Lynx 10.04 and experience massive issues when connecting to wireless - me too. As a service, here some relevant links which promise relief:
[code]...
I tried all of them, and none reliably worked. Every solution which required re-association wtih the AP helped for some time, but nothing helped for long. First, don't let yourself fool by the disable IPv6 trap - while it is "enabled" it is acutally not used by Lucid! I have a clean install of Kubuntu 10.04 on an AMD64 Laptop with Broadcom STA driver: 03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03) However I can reliably stabilize my connection for some time either by manually disabling WiFi with the hardware switch or disabling WiFi by software means and re-activating. This brings speed at par with Kubuntu 9.10 until some time. Can anybody confirm this behaviour?
View 9 Replies
View Related
Aug 20, 2010
I'm using synergy+ with Windows XP as a server and a CentOS client. The mouse speed on the client (Linux) seems really slow. Is there a way to have the mouse speed from the server persist to the clients?
View 4 Replies
View Related
Feb 13, 2011
I have just installed ubuntu 10.10 and i have noticed that my download speed is quite slow. i have an excellent connection to the internet and i didn't have any speed problems when i used windows vista. (i'm using a friend's windows 7 os right now and everything is fine.) how do i modify the download/bandwidth feature that is naturally a part of the ubuntu package so that it's not a problem anymore? the most i think i saw it download packages and files was 37 kb/s.
Basically, the kind of downloads i'm doing are for installing new packages to ubuntu, and that took ages. i even tried to download ubuntu 10.04 from ubuntu.com and it would have taken almost 3 hours to complete!
View 14 Replies
View Related
Aug 11, 2010
I am running Fedora-13 64 bit on my Dell Laptop, The same Laptop has Windows-7 as well (dual boot system). I have chosen ext3 filesystem while installing fedora. The file transfer speed in Fedora-13 over the network to my network drive comes out to be not more than 5MBPS.Where as in Wndows-7 I am getting the speed of around 10~12 MBPS. Also I found that copying files in USB flash drive is very slow than in Windows-7 . What could be the problem? To add it , I have another Laptop Running Ubuntu-10.04 , which also performs network transfers at 10~12 MBPS. So its just the fedora-13 who has this problem. As far as I remember this was not the case with Fedora-12
View 6 Replies
View Related
Sep 10, 2010
Does anyone know how to revert network speeds to those attained with openSUSE11.2-64? On openSUSE11.2-64 the reported network download speed was,
max : 420 kB/s
ave : ~ 200 kB/s
After upgrade to openSUSE 11.3-64 the figures dropped to about 25% of the previous values. After upgrade to KDE 4.5 and plasmoid-networkmanagement the initial values did not change but the average value dropped after about 30 seconds to ~ 15 kB/s. Approach so far:
1. The motherboard's (A780GM-LE) build in LAN (Realtek RLT8111DL) was originally detected by openSUSE 11.3 as the Realtek RLT8169 and kernel module r8169 installed. This was replaced by the latest module r8168-8.019.00 from Realtek.
2. After kernel update to Linux 2.6.34.4-0.1-desktop x86_64 the plasmoid-networkmanagement was replace by NetworkManager-kde4. This improved flow with,
max : 140 kB/s
ave : ~ 80 kB/s
View 9 Replies
View Related
Feb 4, 2010
I'm running ubuntu 9.1 and want to access another computer on my home network. That particular computer is running XP pro. I set up the user account on the windows machine with admin rights, did the remote user yada yada yada...
View 3 Replies
View Related
Feb 18, 2011
I have installed Wubi (Ubuntu 10.10) recently. It takes more time to boot than Windows. But my main concern is that my browsing speed is much slower compared to that on Windows 7. How can this be resolved?
View 1 Replies
View Related
Oct 1, 2010
i have a zenda w322u usb wireless adapter that gives a good connection to wireless router but seems to give very poor download performance compared to my laptop. Are there settings that i can access for this adapter to improve its performance.
View 6 Replies
View Related
Oct 17, 2010
I find the rate of downloading package files from main repository is very slow in my computer(ubuntu OS).What can i do to speed up it?
View 1 Replies
View Related
May 20, 2010
I am running Ubuntu 10.04 from a USB key (16GB). Overall I'm pretty fine with it but there are a few problems I am having. It seems to be very slow. In particular, Firefox and Pidgin freeze every now and then, before becoming active again. The same thing also happens for other applications such as Rhythmbox, Gedit, and the terminal. Additionally my start up and shut down times are horrible (worse than when I use Vista and Ubuntu 8.04). I was wondering if there is something with my install or if this is all due to the fact that I am running from a USB. I don't think it's the USB since I ran 8.04 from a USB HDD (55GB) and didn't have any problems with speed.
View 4 Replies
View Related
Nov 15, 2010
I have a 500gB USB drive connected to my laptop for backups and filestorage. But I can't get it to play nice with Midnight Commander. My transfer speeds max ut at 2MB/s wich is painfully slow when moving large files such as movies. Worker FM transfers the same files to the same drive much MUCH faster (not sure by how much, though). This leads me to the conclusion that the problem lies with MC.
View 5 Replies
View Related
Jul 24, 2010
I'm using Fedora 13 x86_64. The internet speed is very very slow. I have enough hard disk space, RAM. Processor AMD Athlon II 2.6GHz. What can be the reasons?
View 7 Replies
View Related
Feb 25, 2010
I just installed Ubuntu 9.10, replacing Windows 7.
its running a little slower than I hoped it would, loading movies takes a while, and when i switch to full screen, it takes about 5 seconds to catch up.
im suspicious that my video card driver might not be configured correctly. can anyone tell me what I might need to configure to get things running smoother?
other things on the computer are also running slow, like opening Firefox, it takes a while for the window to appear.
- Athlon 64 x2 5200+
- Gigabyte GA-MA78GM-S2h motherboard
- Radeon HD 3650 512mb pci-e
- 4gb DDR2 800
and I do have ATI catalyst installed
View 2 Replies
View Related
Apr 25, 2010
I have been trying out Ubuntu One for the past couple of days but find it to be incredibly slow. At first i had put a folder will a large amount of images in the ubuntu one folder. The total size of it was 35Mb, after over 26 hours only 11,5Mb of that had been uploaded.
After looking around some on these forums i saw several comments about it being slow when it is a large amount of files, no matter if the filesize is small or large. I decided to try it out with a larger single file. I erased everything that was in the previous share and then put my testfile of 350Mb in the Ubuntu One folder.
After two hours of waiting i could still not see it on the U1 website so i decided to see how long it would take with dropbox and put a copy of that file in my dropbox folder as well. The file was uploaded correctly to dropbox in just a couple of minutes but it has still not been uploaded to the U1 website even though it has been 4-5 hours since i first put it in my U1 folder.
View 9 Replies
View Related
Apr 14, 2011
I need to transcript some recordings to a friend of mine. I woule like to have the sound playing slower than usual. Is it possibe on any Ubuntu (L. Lynx) anyway? How?
View 7 Replies
View Related
Apr 8, 2010
I am just checking in I know a lil about linux looking to learn more I know forums are the best way to go. I recently installed centos 5.3 on a machine we are going to be using as a squid server. Just a couple quick ?s and just wanted to pick your alls brains. What I am trying to do with the server is use it for caching to speed up our network t but I don't want to go around to all the our customers to setup their browser for proxy. What all is involved with making this server completely transparent. So the end user will does not need to enter in proxy information.
View 3 Replies
View Related
May 26, 2010
I am using debian(lenny) on a pc coexisting with windows. I use grub to decide which o/s to boot.
I picked debian, logged in as a regular user. I selected "Administration" under the "System" tab and then selected "Update Manager". I had to provide the root password.
I was asked to insert Binary DVD-1 and was told to use smart update. I did at which time 16 files begun downloading at between 4400 B/s and 4800 B/s from the Security server. It looks like it is downloading a new linux image.
Is there any way to speed this up?
View 4 Replies
View Related
Aug 7, 2010
Does anyone know if the Yum fastestmirror plugin only makes decisions based on latency to pick the best host or does it measure bandwidth? On my laptop for the last few weeks I've been getting super slow yum updates (3.5kB/sec), when I force it to use the baseurl it runs as fast as I'd expect (160+KB/sec).
So the fastestmirror plugin doesn't seem to work unless maybe it's measuring latency as fast but the actual download speed is slow. If so, fastestmirror plugin should really take both into account.
View 2 Replies
View Related
Jun 30, 2011
I'm new to openSUSE and my computer is quite slow although my computer isn't that bad. I opened up ksysguard and it appears that my CPU is the bottleneck. My CPU usage is usually 100%, then after a few seconds, it goes down to 20-60% and then it goes back up to 100% after another few seconds. It says I have 141 processes running (I don't know if that's normal or not).
My Specs are:
CPU: AMD Duron (tm) processor 1.8GHz
Graphics Card: NVIDIA GeForce 6200
Memory: 2GB RAM
I'm using KDE.
View 9 Replies
View Related
Feb 1, 2011
I'm trying to transfer some files to my USB stick, and it's transferring at the most pitiful rate, around 200-400kb/s, occasionally shooting up to 1MB/s, but not for more than a few seconds.
I realize a lot of factors can play into this, so I'll try to provide as much detail as I can.
I'm using OpenSUSE 11.3, KDE 4.6 RC2, and a Corsair Mini Voyager 16GB. My motherboard is a Gigabyte EP45-DS3L.
dmesg output:
Code:
lsusb -t output:
Code:
Sometimes too, the transfer just stops all together. It just... doesn't transfer for a while, then it'll go back to 400kb/s etc, then it'll stop again for a minute.
View 3 Replies
View Related
Feb 10, 2010
When using launchpad and the ubuntu daily build website it is very slow. I get 1.2mb/s normally and the speed drops quickly to 0kb/s This is the case from any version of ubuntu that is installed on my laptop.In windows it is no problem, equally there is no problem from a live cd or an install on my external hard disk. Is canonical blacklisting/slow listing my ip?
I am behind a university network but am sure this problem occurs at home .I did a clean install and had no problem until about an hour ago. When I tried to re download a project using bzr my speed instantly ropped.I had downloaded it fine a couple of hours ago. I hope that someone can shine some light on this, its very hard to work on projects if I can't download them.
View 5 Replies
View Related
May 25, 2010
I have a HP nx7400 laptop. Now I have a docking station DC power adapter - Works Fine. Ordered another DC so i could travel with it, but when used ubuntu runs at a very slow speed.
View 3 Replies
View Related
Feb 14, 2011
I use Brasero 2.32.0 to burn DVD's and the max speed I reach writing on my 16x DVD's is 2.5x (more or less).
Follows info's about my OS and HW setup code...
View 6 Replies
View Related
Mar 28, 2011
I have very suboptimal Internet speed in Wifi with Ubuntu. Normally in WIndows 7 I get download speeds up to 800 KB/s and a very fast Wifi experience, but in Ubuntu I get 100KB/s maximum and web page load speed is very extremely slow. Also, pinging to AP often gives very high response times and a lot of lost packages while in Windows they are very low and none packages are lost. I have a Netgear wg111v3 which worked out of box when I installed Ubuntu but always with this problem. It is updated and I've reinstalled Ubuntu many times..
Also I forgot to say that in Ubuntu the connection goes down very often and sometimes will not connect again until I reboot. Again in Windows never happened that.
Motherboard: GA-MA74GM-S2H
CPU: AMD Athlon 64X2 dual core
2 GB RAM
Ubuntu 10.10 64 bit
Wireless adapter Netgear wg111v3 USB .....
View 9 Replies
View Related
Oct 14, 2009
We have a server and we have instales an Open suse 10.3 on it. We created a Samba server also. Made to share folder, that we acces from network from other computers that have xp.
The problem is if we try to copy from server it is very slow only 100-300kb/s. The strange thing is that if i copy 1 file then its slow but if i start to copy another one the speed gos up to 10-15mb/s. Evry time i want to copy somethin or install from that server i need to start another copy. If i copy from a comp to that server the speed is normal only if i copy from server its slow.
View 3 Replies
View Related
