I was wondering how to calculate some problems related to network transfer speed. If someone can show me a function to calculate network transfer speed over time, I would appreciate it.I'm in the midst of transferring 1.3TB of data to a network storage system. By looking at the stats, 4.6GB file transferred out in 6 min and 30 seconds. How long would it take to transfer 1.3TB of data?
View 3 Replies
I just noticed that files are transferring between my two computers at no more than 11.3Mb/s no matter what I do.
I regularly use sshfs to mount a drive on my main computer. But after noticing a dismal speed of 10Mb/s when copying a file, I thought maybe sshfs is slow. So I tried scp, and I'm getting 11.3Mb/s with scp. Using the blowfish cypher gave me no change to this, still exactly 11.3Mb/s.
I have a Gigabit network except for the cable, which is a 10meter, 100Mb/s cable.
I have a custom modified sysctl.conf file which I'll post here if needed.
Is there anything I can do about this pathetic speed ? Maybe a modification to my ssh config ? sysctl ? anything ?
I have the problems with transfer speed between samba and Windows XP clients.
Samba server configuration:
Quad Core 6600 CPU.
4 Gb RAM
OpenSUSE 11.2 with kernel "2.6.31.12-0.1-desktop"
Samba - samba-3.5.1-1.1.i586
Test: 4 GB File copying. One file.
Transfer speed from Samba Server to Windows 7 and XP clients:
(Windows clients copy file from Server share -> to local drive)
From Server to Windows 7 client 1:
85-90 Mb/sec
From Server to Windows 7 client 2:
90-100 Mb/sec
From Server to XP1 client 3
75-100 Mb/sec
Transfer speed from Windows 7 and XP clients TO Samba Server:
(client copy file from local drive -> to server Share)
From Server to Windows 7 client 1:
12-20 Mb/sec
From Server to Windows 7 client 2:
30-35 Mb/sec
From Server to Windows XP client 1
20-27 Mb/sec
(Copying file from Windows local drive to Windows remote share)
From Window 7 client 1 TO Windows XP client 1
40-50 Mb/sec
From Window 7 client 2 TO Windows XP client 1
50-60 Mb/sec
Copying file from Windows 7 client 2 share -> TO Windows XP client 1 show me 100-120 Mb/sec speed permanent.
Copying file from Linux hosts to NFS server is stable 50-90
Mb/sec bidirectional.
This part of my smb.conf file
Code:
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2009-10-27
[global]
log level = 1
debug level = 0
max log size = 50 .....
I have very slow write speed when copying file from Windows clients to Samba Share. Samba speed is slower than Windows native clients connections ?
So what kind of speed are you getting with Samba over your local network? What speeds should I be seeing? I'm currently transferring a large amount of files from one computer to another. I'm taking everything off of a desktop drive on computer A and putting it on an IDE disk on computer B. Transfers are running at around 600-700 KB/Sec. I've seen moments, mostly when the transfer starts, where speeds were at 1000KB/Sec, but that lasts a very short while and then starts to "degrade" until it reaches 600+ KB/Sec. It then seems to level off there. Is this acceptable? Is this all I can expect to get out of a 10/100 home network? The current transfer is 2.5GB. Looks like it will take 1 hour+ to complete. Transferred 12GB last night. Was looking at 4-5 hours to complete so I left it running while I was sleeping. Personally, I think this is slow. I think it could be exponentially faster.
While I'm running these transfers I'm looking at some documentation on Samba speed tweaks. I've been adding little tidbits here and there to both smb.conf files. Some of it seems to help. Sometimes there is a noticeable difference in speed. Sometimes the changes actually cause degradation in speed. If you have a speed tweak that you would like to share the information will be gratefully accepted. Samba gurus welcome to reply. How do you set up Samba in an office environment? How do you set Samba up in an environment where performance is critical?
Maybe I should forget about Samba and try using a different transfer protocol? Am I expecting too much from Samba?I should stop before I really start to ramble. Anyhow, networking beats the heck out of the sneakernet, at any speed!As a side note, or maybe quite importantly, there is a router and a network switch (not a hub) involved here. Maybe something to consider?
We have a server and we have instales an Open suse 10.3 on it. We created a Samba server also. Made to share folder, that we acces from network from other computers that have xp.
The problem is if we try to copy from server it is very slow only 100-300kb/s. The strange thing is that if i copy 1 file then its slow but if i start to copy another one the speed gos up to 10-15mb/s. Evry time i want to copy somethin or install from that server i need to start another copy. If i copy from a comp to that server the speed is normal only if i copy from server its slow.
I recently setup my two PC's for network file sharing using Samba. I notice the max speed I can transfer a file is 89kb/s instead of 100Mb/s. How can I increase the speed to max 100Mb/s? Both systems are running Ubuntu 9.10 w/Samba.
View 7 Replies View RelatedI'm experiencing slow speed transfer between two wireless connected laptops running ubuntu 9.10. Using SSH to tranfer files between these two laptops, which connect to the internet via a wirelesss router, with good speed. This is why I'm surprised by this low speed : 52.3 KB/s, averaging 3 hours and 31 minutes for a 700 Mb movie. Is there any way to make this faster ?
View 3 Replies View RelatedI am running Fedora-13 64 bit on my Dell Laptop, The same Laptop has Windows-7 as well (dual boot system). I have chosen ext3 filesystem while installing fedora. The file transfer speed in Fedora-13 over the network to my network drive comes out to be not more than 5MBPS.Where as in Wndows-7 I am getting the speed of around 10~12 MBPS. Also I found that copying files in USB flash drive is very slow than in Windows-7 . What could be the problem? To add it , I have another Laptop Running Ubuntu-10.04 , which also performs network transfers at 10~12 MBPS. So its just the fedora-13 who has this problem. As far as I remember this was not the case with Fedora-12
View 6 Replies View RelatedI use basic ssh and scp on a regular basis and sometimes for file transfer... certainly over public networks. However, often I want to transfer large (several GB) files from one place on my LAN to another.
I've read that FTP is the fastest, and when I'm transfering many GB, fast matters. Of course I know it's not secure, but I don't need security on my home wired LAN. What I do need many times is preservation of date and time of each file when uploading. Filezilla does that and I use it, but sometimes I need a CLI solution. I have use ncFTP and been happy with it until I realized it doesn't preserve date and time on uploads (probably not on downloads either, haven't looked).
Is there a CLI FTP solution out there that will preserve file date and time information on file transfers (including uploads)?
if my network downs my system process get slow down ... only in user mode but in root it is working fine ..the process slow especially if i try to open a terminal or run any gui application its taking much time comparing to normal time where network is up ..
View 2 Replies View RelatedIn the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies View RelatedI have a 500gB USB drive connected to my laptop for backups and filestorage. But I can't get it to play nice with Midnight Commander. My transfer speeds max ut at 2MB/s wich is painfully slow when moving large files such as movies. Worker FM transfers the same files to the same drive much MUCH faster (not sure by how much, though). This leads me to the conclusion that the problem lies with MC.
View 5 Replies View RelatedI have two machines running open vpn connected trough a 8 port Gigabit switch (Tp-link TL-SG1008D). The problem is when I try to transfer a file the transfer starts at 13 mb/s and drops to 300kb/s. When I replaced the ram on the two machines and restarted the transfer the speed was 13mb/s constant. How does changing the ram makes such differences (at the first transfer they had 512mb at the second transfer the machines had only 128mb) ? Os Ubuntu Server 10.04.2 LTS
PS :Tried with 256 ram and the problem persists...
Machines: two hp d530
slow usb transfer speeds has been resolved in 11.04 (Natty Narwhal)? I am currently using Lucid and facing the problem of slow usb transfer speeds which has always been there in ubuntu but everything else is running just fine for me so I see no reason to upgrade yet unless the new OS has solved this problem.
View 9 Replies View RelatedI use many distros with Amsn or Emesene with both and in all distros slow file transfer speed. There Any knows a client with acceptable transfer speed?
View 2 Replies View RelatedI'm trying to transfer some files to my USB stick, and it's transferring at the most pitiful rate, around 200-400kb/s, occasionally shooting up to 1MB/s, but not for more than a few seconds.
I realize a lot of factors can play into this, so I'll try to provide as much detail as I can.
I'm using OpenSUSE 11.3, KDE 4.6 RC2, and a Corsair Mini Voyager 16GB. My motherboard is a Gigabyte EP45-DS3L.
dmesg output:
Code:
lsusb -t output:
Code:
Sometimes too, the transfer just stops all together. It just... doesn't transfer for a while, then it'll go back to 400kb/s etc, then it'll stop again for a minute.
what might cause a file transfer to start out fast (11-12 mb/sec) and then drop to about 1 mb/sec after having downloaded about 2 gb? This is what happens when I download files from my old fit-pc 1.0 (a small mini PC with 256 MB/RAM, an AMD Geode processor, and a 100 mbps network card) via ftp over my local network. Is it some buffer filling up?
I was directed to some article about "bufferbloat" earlier [URL], but I did not get any solution from that unfortunately. I have tried increasing the server's TCP buffer using these instructions: [URL] , but it does not make any difference. By the way, I am running Ubuntu Server 10.10 on the fit-pc and Ubuntu 10.10 desktop on the connecting client (which is just a normal Core 2 duo, 4 gb ram computer).
UPDATE: I should add that things were working fine when I was using ubuntu 7.10, but are not now that I have installed 10.10...
UPDATE 2: I just found out this is ONLY a propblem when transferring files to ubuntu. If I use winscp from Windows 7, the transfer speeds are fine...
UPDATE 3: It seemed it was gFTP that was the culprit. Transferring the files using filezilla instead in Ubuntu yields an excellent rate of 11.8 MB/sec. Anyone have an idea what might be wrong with gFTP?
I connected a 16GB SDHD Class 4 card to my PC with a dongle reader. A class 4 card is supposed to support a minimum of 4 MB/s sustained speed. I grabbed a couple of large, 4.4 GB each, files and copied them to the SD card with Nautilus. The transfer rate started out at 60 MB/s and rapidly dropped to 50 then 40 and slowly dropped to 3.5 MB/s after about 3 GB transferred and it is still dropping.The PC will copy from drive to drive at 65 MB/s so I do not think the issue is reading from the hard drive.I am confused about the transfer speeds which Nautilus is showing. Obviously I am not really transferring to this card at 50+ MB/s. If I was moving data from hard drive to cache I would expect much more speed - I have 8 GB of RAM on the PC. That said, I have stopped the transfer and attempted to unmount the card. I get the message "Failed to eject media; one or more volumes on the media are busy." This has been going on for several minutes so some activity is going on in the background.
View 3 Replies View RelatedI have one Linux server equipped with WiFi . I want to measure data rate speed on this connection . Is there any utility on my Linux that can measure data speed on one specific Ethernet connection when transferring large size files through WiFi connection?
View 2 Replies View RelatedI want a program that can be installed in two pc and measure speed of transfering files from one to another or any data measured in Mega bit
View 1 Replies View RelatedOk, the only thing I remember doing is changing out my hard drive because it went bad. I swapped in a new one and reformatted with Windows 7. (I can hear the boos and hisses as I type) Anyway, now file transfers are exceedingly slow. They are ~10KB/s when they should be ~40MB/s. The odd thing is that it mostly occurs on large files, but not all large files and sometimes smaller files are affected. Copying files from one hard disc to another on the server, as well as copying from the server to Win7. Local files are not affected. The problem does not occur on my laptop which has Slackware Linux on it.
Another thing about the problem is that when I mount a disc image on a virtual drive, access time is very slow and windows explorer is very unresponsive and often locks up completely.
I have a samba server with Slackware Linux on it and a Windows 7 client. DHCP is configured through dnsmasq. (dhpc-host=<mac address>,<computer name>) Every now and again, dnsmasq seems to conk out when I try to access the network with my Win7 machine. I then have to reboot the server, as my only access to it is via SSH and I don't have a video card in it. After the server reboots everything is fine until accessing the network with my Win7 machine conks it out again.
I've tried different MTU settings, different network cards on the Win7 machine(Dlink and realtek), various regedit hacks, but none of them produce any results.
I have a linux debian on a network connected to a router through a ethernet cord. My linux is hogging the network speed and the users of the other computers on the network aren't very happy. Is there a way to limit the download speed on only my computer?
View 1 Replies View RelatedI have few different usb cards and socets , some of them i have really hotwired.. and i would like to find out where to keep my usb-hdd . few months ago i would use "total commander" it would show .. copying-444Kb/s but these times are over...
View 1 Replies View Related(this is a repost of the same thread in the networking/wireless forum, I think it's better suited here but couldn't see a way to move it) I have a Proliant Microserver, I have Ubuntu Server 10.10 installed onto to a USB stick (the server has an internal USB port). The storage drives are Samsung SpinPoint F1s. The server is plugged into a gbE switch, there is a link from that to a 200mbps powerline link, from there it goes to a 100mbps switch and then to my machine I was testing from.
I realise that a powerline link can often slow things up, but I use the same link for my Internet connection which will happily pull files down at around 4.3mb/s.. so I know the link isn't the bottleneck. If i copy anything via any of the samba shares then it transfers at around 1.5mb/s. This speed does not change if I try plugging the client into the same gbE switch as the server. Similar spees are shown if i transfer it over http via apache2 as well. Client machines are laptop running ubuntu and a win7 desktop. Speeds are the same copying to both of them. I have applied tweaks to samba as described here;
[Code]....
I have not tried this, and I am only wondering about the result.Let's say that I have a PC/Laptop with two network devices: an ethernet and a wireless. Can I connect both of the to the same network (if this network allows both connection) to increase the transfer rate between the PC/Laptop and the server???
View 5 Replies View RelatedHow to find a data transfer speed of a system using squid?
View 4 Replies View Relatedprobably this is the most idiotic question and probably i know the answer. But I want to get confirmed. Is it anyway possible that my mobile broadband speed is slow because of my installation is wrong? actually, I formatted my machine and make it dual-boot. After that my mobile-broadband speed is horrible slow. I installed (a)kmod-wl and as dependency, broadcom-wl but my lspci only shows intel network manager.
Code:
$ lspci|grep Network
17:03:00.0 Network controller: Intel Corporation Device 008a (rev 34)
can this be related or just coincidence?
Any command line tool to measure the network speed between my two linux servers without taking disk speed into account? My network is supposed to be 100Mb, but it doesn't feel like that so I wonder where the bottleneck is. The numbers that I see doesn't correlate well to that. So I'd like to know the speed network card to network card.
View 2 Replies View Relatedhow to view my network connection speed. EG: 10/100/100 mbit. I searched and searched with no luck, I tried ethtool as well as mii-tool.
View 4 Replies View RelatedI installed dnsmasq to speed up dns querry for my network. i didn't really change any thing in my dnsmasq.conf file. i only just put my upstream dns addresses in resolv.conf. i have dchp running and configured to issue the ip address of the system running dnsmasq as dns ip to the dhcp clients. But i have noticed that if i do ipconfig /all on my windows clients, instead of the dnsmasq server ip showing, i still see the dns ip of my upstream provider. by this, iam assuming that the client are not using the cache even though the service is running on the server.
View 6 Replies View Related
